Macbook to TV, Works fine until I put the Macbook to sleep then tv display

Macbook to TV, Works fine until I put the Macbook to sleep,
I wake the Macbook with external keyboard and the display shows up on TV just fine for a second or two then it looks like something changes and then it starts rolling.
It does not do this when Macbook is awake it only does it after it's put to sleep.

Probably the resolution is switching from a mirrored resolution to some other resolution that the TV can't work from. Try this; shut down the MacBook. Cable up the TV to the MB and also the external keyboard and mouse. Hold down the Shift key on the external keyboard, hit the start button on the MacBook and immediately close the lid on the MB after you've hit the start button. Continue holding the Shift key down on the external keyboard until you see the grey screen with the spinning gear at which time you can release the Shift key. The MB should now finish starting up in Safe mode with only the external screen being on. Hopefully the screen will not be rolling.
Once the MB finishes booting, go into System Preferences/Displays and set the resolution to the optimal/desired resolution for your TV. Hopefully this choice will stick through subsequent restarts and also correct the issue of the rolling screen under the conditions in the scenario you described.

Similar Messages

I am unable to open any app on my iphone. While i'm trying to open an app, it just shakes the screen and it does not get open and remains in the same page. It worked fine until I charged the phone in my laptop. Please can anyone help me to recover it?

I am not able to open any app on my iphone. While i'm trying to open an app it just shake the screen and it does not open and remains in the same screen. It worked fine until I charged the phone this evening. After that suddenly I'm facing this. Please can anyone help me to recover this issue? pls!

This is covered in the basics section.
A restore loses nothing.
A restore does. If you are using the iphone as designed, then everything should be on your computer.

HT1459 I did an update on my ipod touch, now it says it is in restore mode. i don't want to lose my info, but my ipod won't do anything now. thanks itunes; it was working fine until i did the update you said i needed. what do i do now??????

I did an update on my ipod touch, now it says it is in restore mode. i don't want to lose my info, but my ipod won't do anything now. thanks itunes; it was working fine until i did the update you said i needed. what do i do now??????

No one here said anything about an update or your device needing it.
FYI, you are not addressing Apple here, we are all users like yourself.
If the device is in recovery mode, the only option is to restore it. All data on the device is gone. This should not be an issue if the device has been used as designed and regularly synced/backed up.

My ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

my ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

- Charge the iPod for half an hour. Then reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- if still not working, connect to your computer. If iTunes sees the iPod, restore the iPod.
- If still problem, place the iPod in recovery mode and then try to restore the iPod. For recovery mod see:
iPhone and iPod touch: Unable to update or restore

My Macbook (2009 White) Has had water spilled onto it, it all works apart from the screen. When connected to an external display it works fine, just not on the Macbook itself. Does anyone know how to fix this?

My Macbook (2009 White) Has had water spilled onto it, it all works apart from the screen. When connected to an external display it works fine, just not on the Macbook itself. Does anyone know how to fix this?

Take it to Apple and ask them to fix the physical damage the water caused.
Allan

Why can't i use realplayer with my mac anymore? it worked fine until i had the hard drive erased and reset

why can't i use realplayer with my mac anymore? it worked fine until i had the hard drive erased and reset

Did you remember to reinstall it?

My macbook air was working fine until all of a sudden it froze.

I have a macbook air and everything was working fine until all of a sudden my computer froze. I then rebooted my computer by press & hold down the power key because it would not allow me to open or close any programs. After i rebooted it, the keyboard & touchpad won't work. i could'nt login to my computer because all the buttons on the keyboard seems to be not responding, only the power button is working. i am also not able to move the arrow around. i think the touchpad too is not responding. really appreciate it if anyone would share any feedbacks.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Second display from iMac27" (late 2009) miniDisplay Port worked fine until today- now no longer connects to Apple Cinema Display

Have a configuration of an iMac27" (MAC 27"/4850-512MB PROCESSOR 2.66GHZ QUAD-CORE INTEL CORE I5 Dec 2009 model) and a second screen Apple Cinema Display 2009 model 24"
The setup with the Apple Cinema Display has been working fine for 3 years and since yesterday the second screen refuses to work.
Connected it to a MacBookPro and the Apple Cinema DIsplay functions fine sot my conclusion is it is not the Apple Cinema Display's error.
Could it be that the Mini Display Port on the iMac is somehow broken? Or is there a software fix I need to checkout?
Thanks for your help on resolving this issue.

UPDATE:
As noted in the first post, both of these newer USB DAC work fine at 24/96 on my wife's iMac, so it's clear that they didn't both become defective when I connected them to the Macbook Pro at the same time.
Resetting the Macbook Pro PRAM didn't help, so I removed the hard shell laptop case to get to the battery and remove it, then reset the SMC. After that I could use the original DAC at 24/96 again, but only IF it was plugged into the rear USB port. If I plugged it into the front USB port then the sound was garbled and filled with noise. This was a vast improvement over no sound at all.
Then I switched to the replacement/updated DAC, but I got no sound at all from either USB port at any bit-rate. And returning to the original DAC again now results in no sound again.
Sigh... I will reset the PRAM and SMC again, and see how far I can get with this. I'd still love some help. Thanks!

My 2013 Macbook Air can't find my HPDeskjet 3050 printer. It worked fine before I took the Macbook away for the summer. What's wrong?

My 2013 Macbook Air can't find my HPDeskjet 3054 wireless printer. They worked fine together before I took the MB away from the printer for the summer. I have tried reinstalling the HP software and a bunch of other things that didn't work. The printer shows up as its own wireless network in the list of networks, but then I have to disconnect from my home network and I lose internet connectivity. What's up?

The printer shows up as its own wireless network in the list of networks
It shouldn't.
OS X: Connecting a Wi-Fi printer to your Wi-Fi network

Leopard works fine, until I do the software updates. Snowy start screen?

Leopard is new for my 1.8gHz IMac G5.
I installed it, then did the Software Update.
When I restart the Mac, I get a snowy glitchy start screen. The monitor still has some quirks here and there after it starts, or it won't. Very inconsistent. It sometimes behaves very slowly after that. Even with only one program open.
I reinstalled the OS, but this time checked the StartUp disk with no errors. Checked Permissions too, just to be sure. No errors.
I then wiped the Hard Drive clean with a fresh install of Leopard. It was fine...until I did the Software Updates again.
I have wiped it clean again...but now I didn't install the Software Update. ...which I'm sure I need.
What am I missing here?

I'm now thinking this could be a hardware issue.
As in, my monitor or the motherboard...or a transistor or something. ANYONE ever have a 'monitor' issue on an iMac like this?

My Ipad2 was working fine until i did the update this morning. Now all my internet connections are Very Very slow.

the icloud was not able to update because my information was different than apple.

now that i cleared up the icloud problem, how to i redo the software update?

Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

After the restore did the phone work properly for a while? Say, a day or so?
If so it is possible you have an app that doesn't let go of memory properly. I reboot my iPhone ( hold sleep/wake and hole till you see the apple logo) every few days. This resets the memory. The iPhone OS has doesn't seem to mange memory very well yet. So a reboot will help with that. I have had my phone almost slow to a stop before I started rebooting. Always reboot after installing a new app. Also do you close all pages in Safari when you are done? This is a good practice. Safari will run in the background and use processor time and drain your battery quicker. Create a new blank page then close all others when you are done browsing for a while. I have also found that certain web site that have animated images like weather maps will turn the phone into molasses. As soon as i close that page it gets faster.
If all of the above have no effect then as Tamara said it is time for a trip to the Genius bar.
Good luck

My airport express frequently drops the internet connection. Once I unplug it and re-plug it in, everything is fine until it drops the signal again. This happens on a regular basis. Is there anything I can do ensure it maintains the internet connection?

My airport express frequently drops the internet connection. Once I unplug it, and re-plug it in, my Macbook Pro17,IMac 24, iPad air and my wife's Acer 15 works fine until it drops the signal again. This happens on a regular basis. Is there anything I can do ensure it maintains the internet connection?

It is tricky..
But yes it can be done as long as you use a different IP subnet to what is being used for the internet..
So I need to know what modem router you have?? Does it have wireless as that would make it very easy?
What IP is the computer getting?
Then I can give you the details to setup wireless statically on a different subnet.

My iPad was working fine until Tuesday night. On that night the Facebook icon want work. I click on the icon and it goes to a white blank screen then right back to the home page. I have deleted it and put it back on, also turned it off and it still want w

My iPad was working fine until Tues. Night. I went to go on facebook and it shows a white page like it is coming on the it goes back to the home page. I have turned it off, deleted Facebook and put it back on but it still does the same thing. What can I do?

Morning DeeHutton,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Best of luck,
Mario

I have an Epson scanner that is apparently no longer supported because it is a PowerPC app. It's a very good scanner that worked fine until I upgraded to OS Mountain Lion on my MacBook Pro. Any suggestions on how I can continue to use it?

I have an Epson scanner that is apparently no longer supported because it is a PowerPC app. It's a very good scanner that worked fine until I upgraded to OS Mountain Lion on my MacBook Pro. Any suggestions on how I can continue to use it?

For that model, Epson has this information:
ICA Scanner Driver
07/17/12
Description: The latest Mac OS X ICA scanner driver for your Epson product is available only via Apple's Software Update. Here's how to get it:
1. Connect the all-in-one or scanner to your Mac and power it on.
2. Select the  menu, then Software Update.
3. Follow the on-screen instructions to install the available updates.
Note: Software Updates may find multiple updates for your system. You may choose to install all or some of the updates by clicking on Show Details.
Compatible Systems: Mac OS X (v10.8.x)

Macbook to TV, Works fine until I put the Macbook to sleep then tv display

Similar Messages

Maybe you are looking for