MacBook Turn off after recovery

Hello Dear users of the apple support communities.
I have a problem. Yesterday, i shutdown Macbook incorrectly (Long press on the power button). Now when I try to turn on Macbook, on the screen appears system recovery.When the recovery is completed - MacBook turn off. I recorded this moment on video: http://www.4shared.com/video/wbT7TO1n/MacBook_Turn_off_after_recover.html
How to solve this problem?
Thanks guys.

Hello Alex,
I would be concerned too if my MacBook Pro was booting just to the gray screen with the Apple logo on it. I recommend following the steps in the article below for the issue you are experiencing:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

MacBook turns off after the startup bong when trying to restart

Greetings,
When I try to restart my MacBook it turns off after the startup bong.
Thanks

Have you tried resetting the System Management Controller? That is a good first step for power related issues such as this.
Best of luck.

Stuck in recovery mode and turns off after 30 seconds

Hi everyone,
I have done my research but no one seems to be having the exact same problem that I have. Here's what happened:
When I was updating the firmware of my Ipod Touch 4g iOS to 4.2 in a MacBook Pro, it suddenly cut the USB power because it was low on battery. After which, my Ipod now only goes from the apple logo to recovery mode (connect to itunes screen)then turns off after about 30seconds.
It still gets recognized in iTunes but it doesn't stay powered on long enough for something to be done (restore, iRecovery, etc.). I have tried doing the DFU to recovery mode, holding the home button when connecting the cable, etc.
I have everything backed up so restoring is not an issue. I just need it to work.
Help!

Not sure if this is the same problem exactly but all of a sudden my phone was stuck in headphone mode & wouldn't make sounds through the speakers at all. This was because of a dirt/dust buildup in the port. What I did was hold the phone & a flashlight in one hand & scraped out the crap with a safety needle/pin thing. This was very useful because I could exactly see where the stuff was & eventually I dug it all out. Works fine now! Hope this helps you/anyone else having a similar problem

Macbook Pro 13 turns off after few seconds.

When I turn MacBook pro 13 on sound play and fans run at full speed but it runs turns off after few seconds.

Correction:
When I turn MacBook pro 13 on sound play and fans run at full speed but it turns off after few seconds.
- MacBook does not work on batery - evenif i disconect batery - no result
- I try with diferent power adapter - no result.

My Macbook turns off randomly after being on for a while and usually occurs when streaming video on netflix or something. I think it is overheating. Any thoughts?

My Macbook turns off randomly after being on for a while and usually occurs when streaming video on netflix or something. I think it is overheating. Any thoughts?

You might be right about the reheating. Get iStat Pro https://www.apple.com/downloads/dashboard/status/istatpro.html
To monitor your tems and fan speeds.

HT1430 my iphone 4 turn off after appearing message "temprature high, need to be cool down after than doesn't becoming turn on"

my iphone 4 turn off after appearing message 'temprature high, need to be cool down' after that does not getting turn on by anyhow.

Hello vijaypatel,
Thanks for the question. The following article outlines the temperature warning that you experienced:
iPhone, iPad, and iPod touch (4th generation): Keeping device within acceptable operating temperatures
http://support.apple.com/kb/HT2101
If the iPhone is no longer powering on, we will need to isolate this issue to determine if it is hardware related.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
- Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
- Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
Learn about LCIs and corrosion.
- Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
- After at least 15 minutes, if:
               - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
               - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
               - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
- If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
               - If the display turns on, go to step 4.
               - If the display remains black, go to next step.
- Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
- If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks,
Matt M.

Mac 10.6 won't turn off after update

Macbook air a1304 won't turn off after updating unless you push on/off button.

Phone your nearest HP Support to request warranty service. Worldwide contact info can be accessed here>Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Battery shows 34% and the Macbook turn off

I am having a problem with my battery it shows that the battery has between 30% and 35% of charge but my macbook turns off and I can't turn it on until I plug the power. If I press to see if there is battery it flashes 3 lights.
I tried to upgrade the battery software but I already have the last version.
Is there a recall for batteries of macbook aluminium?

Your full charge capacity is far too low for just 98 cycles. Apple suggests that you should still have 80% capacity (perhaps 3600 mAH) at 300 cycles. "Verify the battery" is also a bad sign.
Try resetting the SMC:
http://support.apple.com/kb/HT1411
And if that doesn't change your information, call AppleCare and demand a new battery, as yours has experienced a failure beyond the normal expectations.
Be certain that after you get your new battery, you calibrate it regularly (every 4-8 weeks):
http://support.apple.com/kb/HT1490

When Unplugged my MacBook turns off

Like the subject says my MacBook turns off immediately after I unplug it. Also it continuously states that its calculating the battery. It shows the little plug inside the little battery outline and the plug's light is green. What should I do?

Try to reset the SMC (System Management Controller).
Have you done the battery update? About Battery Update 1.2. Depending on your model you may not need it. read the instructions.
If none of this helps I suggest you contact Apple support for more help. You may have a bad battery.

IPhone 5 keeps turning off after battery replacement

iPhone 5 keeps turning off after battery replacement. After 10 minutes or so, the phone freezes and shuts off, can't even use it anymore.

Hi there Luke811813,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
1.Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
2.Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
3.Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
4.After at least 15 minutes, if:
•The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
•The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
•Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
5.If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
•If the display turns on, go to step 4.
•If the display remains black, go to next step.
6.Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
7.If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W.

Apple Mac book pro just turns off after few seconds after turning on

Hi Folks,
I just turned on my Apple Macbook pro. Whenever, I turn it on, the progress bar comes with the Apple symbol and after few secs, it turns off by itself. Have tried to turn on the MBP number of times but the same result
Please help...
Regards,
Nadeem

Correction:
When I turn MacBook pro 13 on sound play and fans run at full speed but it turns off after few seconds.
- MacBook does not work on batery - evenif i disconect batery - no result
- I try with diferent power adapter - no result.

How do I turn off internet recovery in Mountain Lion?

I need to turn off internet recovery in Mountain Lion. The reason is if you use internet recovery you can access safari and although parental controls are on, internet is unmonitored. I want to ensure my MBP is secure from the darker parts of the internet and thus I don't want there to be any unmonitored internet access.
Is there a way to turn off internet recovery or is it hardwired into Mounatin Lion?
Seb

Open firmware password may be the way to do it. Mind you, a clever enough person can bypass that, but it takes more effort than it usually is worth. Put a hidden camera in the room if you are worried something will happen, and backup the data only when you are present. And if you forget the open firmware password, you may have locked yourself out for good anyway.

Yoga display turns off after 1 minute

I'm having an annoying problem with my new Yoga related to the display and have not seen any other posts with a similar complaint so perhaps this is a simple fix that I'm just not able to sort out on my own. My display turns off after 1 minute of inactivity. The only means for changing behavior like this that I am aware of is through the Control Panel Power Options. My settings for "turn off the display" are 10 minutes on battery and Never while plugged in (note screen shot attached). Regardless of my settings, the screen turns off after 1 minute. I've changed the settings to multiple configurations and restarted with no change in behavior. Perhaps there's some other settings area, maybe something specific to Lenovo that I'm not aware of (since this is my first Lenovo laptop). Anyone with similar problems or insight?

This may be a Windows 8 issue. I finally fixed this problem by identifying the screen saver as the issue (and I wasn't using a screen saver). Type "lock the computer" into the search box after clicking the search charm, which brings up the screen saver dialog box. Mine was set to 1 minute, though I'd never set it myself. If you can't change it, choose a screen saver and you should be able to do so (and can then switch back to no screen saver). BUT, here's the problem. Other things you install (or settings within things you install) can apparently change and override whatever you type in for the delay time. Try applying your new time and exiting from the dialog box, then open it back up again. I was finding that it kept going back to 1 minute. To reset things so that you can get control again, type "user accounts" into the search box and when the dialog box comes up, choose "Reset Security Policies". Then you can go back to the screen saver dialog and successfully change the delay time. See http://social.technet.microsoft.com/Forums/windows/en-us/ace4085a-b0ba-4a98-898d-cd92d9e88e13/window... for some detail.

My screen darkens after 1 minute and turns off after 3. All of a sudden, now, after the screen shuts down, it comes right back on????

My screen darkens after 1 minute and then turn off after 3 minutes (energy saver). Now, all of a sudden, after it shuts down it comes right on???

thank you so much sir... i am very thank ful to u... it was an breath taking moment ... i was almost dead as it didnt work

Screen turns off after a few minutes and needs to be closed then opened

hi, as the title suggests my powerbook screen turns off after a few minutes before my screensaver is set to come on and when i come back and press a key or move the pad it wont start up so i need to close the powerbook then open it up again for it to activate. its not a huge problem but my programs which connect to the internet seem to lose their connection when i open it up again. is this normal? is there a setting i can change?
thanks
ross

Is there a way to "disable" Standby, Suspend and Off just when watching movies (in fullscreen or not)? I want them to do what they usually do in all other cases.
Setting them to 0 in xorg.conf does the thing, but I need that functionality only when I'm wathing movies. Making a script that alters adjustments in xorg.conf isn't the best solution - you'd have to restart X every time you want to watch a movie .
Cheers,
Daniel

MacBook Turn off after recovery

Similar Messages

Maybe you are looking for