Macbook turns off. Date & time, passwords...

So, today I unplugged my Macbook for the first time in about a week and the battery drained to about 60% and my Macbook shut off. I tried to turn it back on but it didn't work until I got it back onto the charger. When I turned it on, it started up fine but it told me that the date and time was reset to a time before 2008 and it had forgotten my internet password.
I bought the Macbook in January of 2010, so it's faily new.
HALP?!

Sorry! I'm new at this. >_<
Battery Information:
  Model Information:
  Serial Number:          9G9480QC99LGA
  Manufacturer:          DP
  Device name:          bq20z451
  Pack Lot Code:          0000
  PCB Lot Code:          0000
  Firmware Version:          0103
  Hardware Revision:          0002
  Cell Revision:          0130
  Charge Information:
  Charge remaining (mAh):          3640
  Fully charged:          Yes
  Charging:          No
  Full charge capacity (mAh):          3640
  Health Information:
  Cycle count:          449
  Condition:          Check Battery
  Battery Installed:          Yes
  Amperage (mA):          0
  Voltage (mV):          12165
The fact that it says "Check Battery" makes me nervous. >_<

Similar Messages

  • My macbook turns off randomly but not completely because when I tap the touchpad it goes to the password screen and I am back to it in seconds. It's really annoying. HELP!!!

    My macbook turns off randomly but not completely because when I tap the touchpad it goes to the password screen and I am back to it in seconds. It's really annoying. HELP!!!

    1. Non volatile random access memory (NVRAM) is where the computer stores user's settings, like time and date, speaker volume, energy saver settings etc.
    2. Reseting NVRAM has no impact on anything on your hard drive, or anything else on the computer.
    See this note from Apple: http://support.apple.com/kb/ht1379

  • My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen.  Can anyone tell me what this is?  I've restarted and turned off several times.  I left it on in this state for 8 hours and

    My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen.  Can anyone tell me what this is?  I've restarted and turned off several times.  I left it on in this state for 8 hours hoping it would reload and work.  No luck.

    Hello KCC4ME,
    You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
    OS X: What is Safe Boot, Safe Mode?
    http://support.apple.com/kb/HT1564
    If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
    OS X Mavericks: If you think you have incompatible login items
    http://support.apple.com/kb/PH14201
    Cheers,
    Allen

  • Allow active content to run files on my computer - turns off each time system is rebooted.

    I seem to have an issue with setting the allow active content to run files on my computer in internet explorer. Each time I turn it on reboot the computer the setting is turned off.
    This computer is on a domain, but there are no domain policies for internet explorer.
    Any idea's why this is turning off each time I reboot?
    Thanks

    Hi John,
    Based on your description, we can try to set the following registry key to see if it helps:
    HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_LOCALMACHINE_LOCKDOWN
    Value Name: 
    iexplore.exe
    Value Type: 
    REG_DWORD
    Value Data: 
    0
    Regarding this point, the following article can be referred to for more information.
    "Allow active content to run files on My Computer" Group Policy Setting Does Not Work as Expected on Windows Server 2008 or Windows Vista RSAT
    http://support.microsoft.com/kb/2002093
    Best regards,
    Frank Shen

  • Turning off Data Saver.

    My Droid Razr Maxx has a notice up in the drop down notification screen and it says.. "82 items waiting to upload, turn off data saver to upload" what the heck is this? I have tried all sorts of things and cannot find "Data Saver" anywhere.. HELP....
    Melissa

    ok under system settings I have airplane mode, wi-fi, blue tooth, tethering & mobile hotspot, data usage( under that there is Mobile data usage), VPN and Mobile networks.
    then under Device there is sound, display, storage, battery, apps.
    then under Personal there is accounts & sync, Backup assistant plus, device setup, location services, security, language & input, Privacy.
    then under system there is date & time, ptinter settings, accessibility, developer options and about phone.
    Im not finding anything that says data manager, I went into the battery section, nothing there. ugh this is so frustratiing, every time I take a picture the number there increases but nothing happens.

  • My MacBook turns off immediately when it is not plugged

    Hi all, I've had this macbook for about 2 years now.
    It had no problems at all. (I didn't use my macbook for like months)
    Then I needed it for my school, so I installed windows 7 using bootcamp a few days ago.
    and I've noticed that my macbook turns off immediately when it's unplugged.
    i thought it is because of windows at first time,
    but I booted on with Mac OS and it has same problem.
    It just turns off immediately. and it won't back on until I plug it to charger.
    Is it battery problem? or could it be anything else?

    Sounds like the battery to me. Usually they don't like being left for months especially if fully charged.
    Check the battery health
    Click on the Apple icon at the top left corner of the screen
    Click on "About this Mac"
    Click on "More Info"
    Under Hardware, click on "Power". This will show you information about your battery, including how many cycles the battery has been through, it's charging ability and so on.
    Thanks
    Glenn

  • This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal.

    This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet it remains. What do I do, I need your help PLEASE.

    Hi
    Error -50 paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Video codec
    • streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Klaus1
    You need more free space on your hard drive.
    jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    Where do Your material come from
    • Camera
    • External hard disk
    • USB-memory
    And all are connected so that iMovie can find it ?
    Yours Bengt W

  • Turning off data services

    Hi, I was just wondering why you can't use wi-fi when you select to turn data services off. The problem is, is that for this 1 month I don't have unlimited data so need to make sure I don't spend much. Also will any services try to use the data service without user interaction? Thanks for your help

    chrislee_88 wrote:
    Whenever i turn data services off though it seems to also turn wi-fi off somehow.
    It connects to a network however whenever i try to use anything it comes up with 'Unable to connect to the internet, please try again later.' The wi-fi diagnostics menu also says that the 'IP address no longer valid'
    Whenever i turn data services back on wi-fi goes back to normal. Weird.
    I have a feeling that you don't have the browser set as a Hotspot browser, then. 
    Even if you turn off Data Services, your Wifi Hotspot browser should work fine. I have one Bold device with no SIM even it, in which I can access and browse the internet on it via only WiFi using the Hotspot browser.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How do I turn off back upp password?

    How do I turn off back upp password?

    I contacted my carrier as the voicemail screen on the phone indicated your same response.  Evidently with IOS 8.0.2, the phone will ask for your voicemail once and you have to set it up and then it does not ask for it anymore.  The carrier did need to reset it to allow me to do the aforementioned tasks and gain access to the voicemail.  Thank you

  • HT1807 I have an iPhone 3s.  How do I turn OFF data roaming?

    I am traveling in Mexico.  I have an iPhone 3s.  How do I turn OFF data roaming?  Under SETTINGS I don't see Network. I don'r see it under SETTINGS/General either.

    What you should do, if you don't want any nasty surprises, is put your phone in Airplane mode. That turns off all iPhone radios, but you can go back into settings & turn WiFi back on.
    Do not rely on the data roaming setting to protect you.

  • HT4623 since i updated my iphone 4 to ios 6, i ve noticed that the wifi connection turns off each time when the screen is locked. I need to be connected with wifi all the time so as to stay updated with all my emails.

    since i updated my iphone 4 to ios 6, i ve noticed that the wifi connection turns off each time when the screen is locked. I need to be connected with wifi all the time so as to stay updated with all my emails. is there anyway for this problem.
    (PS: i know we could use 3G but i want to use wifi instead)

    I am having a really wierd issue as well that is probally related. I dont see 95% of the album artwork associated with my music. Also, it seems as if this has gotten worse since I started using that match feature

  • How can I turn off me restriction password if I forgot the old one

    How can I turn off me restriction password if I forgot the old one

    Only by using the correct Apple ID & password.
    https://appleid.apple.com

  • How can I turn off my voicemail password on Iphone 6?

    How can I turn off my voicemail password on Iphone 6?
    Did not have to enter a password after my screen password with my 4S.

    There is no way to do this.

  • How to turn off Flex Time

    Hi I am just wondering how to turn off flex time as it gets in the way.

    There's a little button on the left by the word "Audio Region"
    If the EVIL FLEX TIME is on, that little icon next to "Audio Region" will be twisted like a bow-tie indicating that the EVIL FLEX TIME has been activated.
    To move audio you have to select the top bar of the clip in this lower audio region (you can see the name of the track or the time code of the track). You can drag-highlight-delete audio from under the "0" line, but not move it. You can also clumsily-and-not-at-all-precisely move audio in the upper tracks (as opposed to the Audio Region window) by dragging them. That won't engage EVIL FLEX TIME at all.
    Hope that helps.
    :S
    I know... it all stinks and now it looks like the latest Garageband update messes it all up even more!
    OY!

  • MacBook turned off and won't charge now

    MacBook turned off and it won't charge now.
    I tried two different charges I finally see a faint orange charge sign.
    Is my battery dead? I have only had this MacBook for 3.5 years

    Go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you are running 10.7 Lion, 10.8 Mountain Lion or 10.9 Mavericks), then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information from the top of the page back here.

  • Would like to turn off or on password ? When at home I leave off till I want to turn. Is this do able?

    Would like to turn off or on password?  When at home I leave it off till I need to turn back it  back on for security.  Is this possible?

    CTRL+B will open or close the Bookmarks Sidebar
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Maybe you are looking for

  • Error in Check in of Originals by BAPI In background

    Hi Friends We have requirement to check in the documents in DMS in background mode using  BAPI_DOCUMENT_CHECKIN_REPLACE2 . Original files are stored on application server in folder G: drive . When I run this BAPI  in foreground mode it runs fine. But

  • How to include javascript in Edge?

    I am new to jQuery and Edge. I want to add some "Drag" functions to my project and I browsed the forum and found a javascript plugin. So I downloaded the js files and placed them in my project folder (the folder containing .an and .html) I searched t

  • Need Employee check-in Software (Secretary's should update it)

    Need an Employee check-in Software please. We recently ditched all our old Windows XP machines and bought all Mac Minis. We used to use MSN Messenger and employees could let everyone knows they are Online, away, sick, vacation etc. It was easy to use

  • Scheduling Agent - failure to retrieve schedule

    Hello ODI gurus. We are using ODI 10.1.3.4.0. We can schedule execution of scenarios and sometimes, in Topology Manager, can "view schedule" of the agent. But often, at other times, when we attempt to "view schedule", it returns "Unable to retrieve a

  • Express Server 6.3.4  Web Security

    Unable to use security for Web connection to Express Server. Upgraded from Express/Web 6.3.3 to 6.3.4. All features worked fine in 6.3.3. Install was OK, and without error. Databases migrated OK. Using Win 2K Server,SP4. Express Server 6.3.4 works fi