Macbook ver 10.6.8 after update 10.6.8 combo cannot join open wifi anymore

I am using Macbook ver 10.6.8 after update 10.6.8 combo i cannot join open wifi anymore.it shows me no internet connection.in fact before this i can acces any open wifi smoothly.it makes me annoyed and regret my action updating the combo.almost 3weeks i try to find the solution by read any suggestion from community but it makes me frustrated. for sure i refuse to send away my macbook to technician because what i knew they also take solution from here.i state here my macbook details :
Model Name:          MacBook
  Model Identifier:          MacBook3,1
  Processor Name:          Intel Core 2 Duo
  Processor Speed:          2.2 GHz
  Number Of Processors:          1
  Total Number Of Cores:          2
  L2 Cache:          4 MB
  Memory:          4 GB
  Bus Speed:          800 MHz
  Boot ROM Version:          MB31.008E.B02
  SMC Version (system):          1.24f3
  Serial Number (system):          W8744400Z63
  Hardware UUID:          6172E4C5-C120-5C8A-9B2E-430B3D42C912
  Sudden Motion Sensor:
  State:          Enabled
this the details my current network:
AirPort:
  Type:          AirPort
  Hardware:          AirPort
  BSD Device Name:          en1
  IPv4 Addresses:          169.254.70.222
  IPv4:
  Addresses:          169.254.70.222
  Configuration Method:          DHCP
  Interface Name:          en1
  Subnet Masks:          255.255.0.0
  IPv6:
  Configuration Method:          Automatic
  Ethernet:
  MAC Address:          00:1d:4f:fc:c2:34
  Media Options:
  Media Subtype:          Auto Select
  Proxies:
  Exceptions List:          *.local, 169.254/16
  FTP Passive Mode:          Yes
  Service Order:          2
this is the open wifi i always acces smoothly before i update the combo:
  Software Versions:
  Menu Extra:          6.2.2 (622.2)
  configd plug-in:          6.2.5 (625.6)
  System Profiler:          6.0.1 (601.1)
  Network Preference:          6.2.2 (622.2)
  AirPort Utility:          5.6.1 (561.3)
  IO80211 Family:          3.2 (320.1)
  Interfaces:
en1:
  Card Type:          AirPort Extreme  (0x14E4, 0x88)
  Firmware Version:          Broadcom BCM43xx 1.0 (5.10.131.42.4)
  Locale:          APAC
  Country Code:          MY
  Supported PHY Modes:          802.11 a/b/g/n
  Supported Channels:          1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
  Wake On Wireless:          Supported
  Status:          Connected
  Current Network Information:
TM WiFi:
  PHY Mode:          802.11g
  BSSID:          0:19:be:80:20:1a
  Channel:          1
  Country Code:          MY
  Network Type:          Infrastructure
  Security:          None
  Signal / Noise:          -77 dBm / -94 dBm
  Transmit Rate:          36
  Other Local Wireless Networks:
TM WiFi:
  PHY Mode:          802.11g
  BSSID:          0:19:be:80:21:96
  Channel:          6
  Network Type:          Infrastructure
  Security:          None
  Signal / Noise:          -78 dBm / -99 dBm
Location (8/1/12 8:22 AM):<<<<<<<<<-------------------------At this time i can acces this open wifi with auto-login
  Active Location:          No
  Services:
Ethernet:
  Type:          Ethernet
  BSD Device Name:          en0
  Hardware (MAC) Address:          00:1b:63:a6:2e:44
  IPv4:
  Configuration Method:          DHCP
  IPv6:
  Configuration Method:          Automatic
  Proxies:
  Exceptions List:          *.local, 169.254/16
  FTP Passive Mode:          Yes
FireWire:
  Type:          FireWire
  BSD Device Name:          fw0
  Hardware (MAC) Address:          00:1d:4f:ff:fe:72:00:d4
  IPv4:
  Configuration Method:          DHCP
  IPv6:
  Configuration Method:          Automatic
  Proxies:
  Exceptions List:          *.local, 169.254/16
  FTP Passive Mode:          Yes
AirPort:
  Type:          IEEE80211
  BSD Device Name:          en1
  Hardware (MAC) Address:          00:1d:4f:fc:c2:34
  IPv4:
  Configuration Method:          DHCP
  IPv6:
  Configuration Method:          Automatic
  DNS:
  Search Domains:          , 94C723E0-B495-45CF-8ACE-279AF0F2D687
  Server Addresses:
  Proxies:
  Exceptions List:          *.local, 169.254/16
  FTP Passive Mode:          Yes
  IEEE80211:
  Join Mode:          Automatic
  JoinModeFallback:          Prompt
  PreferredNetworks:
  SecurityType:          Open
  SSID_STR:          TM WiFi
  Unique Network ID:          94C723E0-B495-45CF-8ACE-279AF0F2D687
after i update the combo:
and the page which the open wifi load automatically did not appear as before.
if the update affect the wifi,cant i just downgrade and remove the annoyed combo?any expertise r welcome to give great solution..plzz!!!need your help!!!!

cant believe it nobody reply.. very dissapointed ..i bring my mac to experrt and he reset my mac to the original version 10.6.8 .. n seriously after it done.. the connection as i mentioned which annoyed me settled and it works like a charm.. when i try to check update my software ...it showned combined software for 10.6.8.. however i still afraid to update it.. i'm still in trauma...

Similar Messages

  • After updating my 4s iphone i cannot com on wifi ?

    After updating my Iphone 4s i cannot go on wifi and it hold the same ip adres it only works on 3G net.
    Best regards
    Moesper

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. Contact Us

  • My MacBook Pro won't restart after updating iTunes, and so the update doesn't work. I have just purchased an iPad mini and can't sync it - can anyone help?

    My MacBook Pro won't restart after updating iTunes, and so the update doesn't work. I have just purchased an iPad mini and can't sync it - can anyone help

    Press and hold power button for up to 30 seconds. Remove battery and reinsert then repeat.

  • How can I restore iPhoto 9.4.3 to Mt Lion after updating to Mavericks.  I cannot open iPhoto in Mt Lion.

    How can I restore iPhoto 9.4.3 to Mt Lion after updating to Mavericks.  I cannot open iPhoto in Mt Lion.

  • After update I am no longer able to open email attachments by just clicking on the attachment. I now have to click control and then click open linked file. How can I open attachments by simply clicking on them?

    After update I am no longer able to open email attachments by just clicking on the attachment. I now have to click control and then click open linked file. How can I open attachments by simply clicking on them?

    Unless you believe middle-click is yours and don't like it being usurped, mine is set globally to "Enter".

  • After updating iPhone 4s to 7.1.1 My wife can no longer get 3g signal at her work

    After updating iPhone 4s to 7.1.1 My wife can no longer get 3g signal at her work. Other un-updated iPhones still work fine. IOS 7.1.2 does not fix the problem.

    Hi there Salient2,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    -Griff W. 

  • After updating my computer, my iweb is not opening...please help me get it back!

    after updating My computer, my iweb is not opening...please help me get it back!

    Verify that your domain file is located in your Home/Library/Application Support/iWeb folder which will be invisible. However, 
    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    For  Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    Next:
    To open your domain file in Lion, Mountain Lion or Mavericks or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    Since iWeb has discontinued by Apple the new systems don't handle the iWeb preference pane as it was in earlier.  The script corrects that situation and once you open the domain file the first time you can just use iWeb to open it from there on.  However, you'll need it if you plan on using more than one domain file. And adhear to the warning above.

  • My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?

    My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?

    Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
    Regards
    TD

  • After yosemite appear a message "DMSLaunch cannot be opened due to a problem" when I ignite the Macbook Air

    After yosemite appear a message "DMSLaunch cannot be opened due to a problem" when I ignite the Macbook Air

    Uninstalled the application Div X that did not find the library and was solved the problem.
    Thanks.

  • After updating to iOS 5, I cannot retrieve Yahoo Mail

    After updating to iOS 5, I cannot retrieve up to date Yahoo Mail.  It successfully connects.  But it only shows some old emails.  Nothing current.  I've deleted the Yahoo connector and recreated it.  Same thing.  I know I have new emails waiting in my Yahoo Inbox, yet they're not showing on my iPhone.
    Any ideas?

    I fixed Yahoo Mail on my 3GS with iOS 5:  In Settings, "Mail, Contacts, Calendars", I reduced "Show" to "50 Recent Messages"
    It had been set to "200 Recent Messages"
    I also have an Exchange and MobileMe account setup on the phone.
    I guess that there is not enough memory or something with iOS 5 on some devices to hold 200 Recent Messages from multiple accounts.
    Hope this helps!

  • HT4623 How can I retrieve my Contacts that I lost after updating iOs 6 on my iPhone 3GS through wifi?

    I lost all my Contacts after updating iOS 6 on my iPhone 3GS through wifi. All my other apps, Notes, Photos, etc are as it is but none of my Contacts appear. I also signed up to iCloud during the update but can't find Contacts on iClouds. Pls help!

    It is strange people experience this problem only with Contacts because normally contacts are backed up with Notes and Photos and that stuff. If you are willing to do a do-over, you can try to backup, restore, and put your data back on again and see if anything new appears. You never know if some file clould have had some kind of conflict because iOS 6 was being installed while data was being restored at the same time.

  • IPhone 3GS after updating Ios 6.1.3 cannot be activated

    iPhone 3GS after updating Ios 6.1.3 cannot be activated. When I connected my iPhone to iTunes on PC, iTunes said that there was no SIM card on iPhone. I also took out the SIM Card and took in the SIM Card, but it wasn't working. I activated iPhone through WIFI but it said that the server was temporarily not available. I tried again more and more times but nothing's changed. Please help me.

    See here  >  http://support.apple.com/kb/TS3424
    Also see this discussion.
    https://discussions.apple.com/message/21189708

  • After updating i cant get my apps to open

    After updating my iphone 4, I cannot open my apps. help

    See #3 Here > http://support.apple.com/kb/TS1702

  • After updated to OS X Yosemite, unable to open my Photon 3G software

    Hi
    After updated to OS X Yosemite, unable to open my Photon 3G software which was working previously properly.
    Please help me out

    Go to the system preference and click on network.
    In network it will show you the dongle option like in my case my dongle name is ZTEUSBModem.
    And enter the phone number "*99#". Click on connect.
    http://apple.stackexchange.com/questions/153136/tata-photon-3g-dongle-crashes-af ter-upgrading-my-os-to-yosemite

  • HT4623 After updating my iphone through iTunes I cant open it. It ask me to restore my phone. How can I open it without restoring ?

    After updating my iphone through iTunes I cant open it. It ask me to restore my phone. How can I open it without restoring ?

    Go into your iTunes preferences and select devices (on a Mac it's iTunes > Preferences > Devices; on PC it's Edit > Preferences > Devices). This will show you any and all iTunes backups you have, including your phone. If you don't see any backups, then you don't have one in iTunes.
    With iCloud, if you've got a backup you can view it using an iOS device that's logged in with your iCloud (apple ID) account. You go into Settings > iCloud > Storage & Backup > Manage Storage and see if your phone is listed there. If it is, then you have a backup for it. You can click on it to see how large the backup is and what is backed up.
    Don't be afraid to restore it. The worst that can happen is that you lose data. If you have a backup, then you can get that data back. If not, then you will have to start over, but your phone will still work.

Maybe you are looking for

  • Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

    Hello! I have problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no OS preinstalled. I do the following: 1. Install Windows 7 x64, SP1. 2. Install LAN driver (device was not recognized by Windows 6) (downl

  • Apps don't start since updated 10.8.5 today

    i had a software update pending in AppStore which included a safety update and some other stuff for 10.8.5 today, which i did update and then restarted. since then basically all third party apps except firefox don't work, they immediately crash after

  • Relation between record in a form and insert statement written in button

    hi all, i am using Forms [32 Bit] Version 6.0.8.24.1 (Production). i have a master detail form with relation A is master of B, B is master of C and a button which resides on control block(other than A,B,C). so i will insert a one record into the bloc

  • USR02-LTIME - Last logon Time

    Hi All we have to trace the last logon time of CRM webclient users but USR02-LTIME does not write the right time, in this sense: - you logon at 11:00 with user TEST - you see USR02-LTIME = 11:00 - you use the webclient without logoff and you see in U

  • Common Linex & vi  commands for DBAs

    Can some body forward me the everyday linex & vi commands for DBAs ...