Macbook w/Airport Extreme Base Station

I have a Macbook that I just bought 3 days ago. Like everyone else, I am having the same problem with wireless encryption.
However, when I turn off the WPA and just use WEP, I can connect but it seems to lag. What I mean is everytime I browse, it's almost like my computer needs to "reconnect" with the router. If I stay a a site for more than a couple of minutes the connection kind of goes to sleep. It shows I am connected but it just sits there, sits there, and then connects. When I am on WPA or wired I do not get this.
So, for my actual question, does the Airport Extreme Base Station have issues like this?
On Apple.com, people are giving it glowing reviews. On the net, the reviews are marginal at best.
Current Setup:
Macbook
Linksys WRT54GX4 w/SRX400
Thanks in advance!

I have several Linksys routers and also an Airport Extreme Base Station. I like the Linksys better. The AEBS has arguably better output power than my Linksys, but in my 1600 square foot house, it doesn't matter.
I also have a Macbook c2duo running OSX 10.4.10, and it drops off the AEBS just as much as any other router.
The downside of the AEBS is that it doesn't have a native web based management system. You've got to use the management tool to deal with the AEBS using SNMP protocol. It'd be nice if you had to manage 100 AEBS, but is a nuisance for home use. I found the latest realase of Airport utility (v5.2) to be very buggy on Windows XP - it killed my PC's abaility to negotiate a DHCP lease until I downgraded back to version 5.1. I ultimately went back to using my WRT54GS. The Linksys has lower throughput, but that only matters for specsmanship. The other thing is that Linksys can do multiple PPTP VPN pass through, but VPN pass through doesn't work on the AEBS unless you use bridge mode and static IPs.
I spent the cash for the AEBS, but in retrospect I would have rather put it towards memory upgrades, etc.
Bill

Similar Messages

  • Using an External USB soundcard with Airport Extreme Base Station

    Hello, I own a macbook, an airport extreme base station and a Native Instruments Audio Kontrol 1 USB 2.0 external sound card that works like a charm with my macbook. I have a printer and a hard drive connected to the USB from the Airport base station through a hub, and I was wondering if there is any way I could make my macbook recognize the external sound card when connected to the base station's USB port. I would like to be able to play music wirelessly through the base station but the application/driver from Native Instruments does not recognize the sound card plugged to the router.
    Thank you

    if there is any way I could make my macbook recognize the external sound card when connected to the base station's USB port
    First welcome the the Apple Discussions Forum!
    To your question - it's highly unlikely, sorry!

  • How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

    How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

    Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
    Click Time Machine
    Click Options
    Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
    The drive will be backed up on the next Time Machine pass
    Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

  • I have a MacBook ProDo I have to have the Airport Extreme Base Station for my Airport Express to work?

    I cannot get the darn Airport Express to work!  It just keeps blinking Amber.  I know it must be something silly I am over looking.  And I do not have the Airport Extreme Base Station.
    Thank you for any help!!!
    Elizabeth

    Thanks,
    This is the rear of your modem/router:
    Connect a Cat5e or Cat6 cable from any of the 4 Ethernet Lan ports to the (single) socket on the Express, then go to Airport Utility (Applications>Utilities>Airport Utility) and select create a new network.
    You will need to turn the wireless transmiter in the Netgear off, here is a link to the Netgear Manual in case you need to refer to it.
    Netgear Manual

  • Printing wirelessly to MacBook Pro with Airport Extreme Base Station

    I have an Airport Extreme Base Station that I used to use wirelessly until I got Verizon Fios. The Fios technicians said the base station couldn't be used and so it's been sitting unused for a few months. However, I really, really miss printing wirelessly, and was wondering if it was possible to use the Airport Extreme Base Station ONLY to print wirelessly, and not connect it any way to my internet (I don't want to mess with any of the fios stuff at all).
    If it's not possible, is there any other way to print wirelessly without purchasing another product or special printer. I have a HP c4480 printer.
    Thanks!

    If your printer has a USB cable the easy way to go about this in my opinion is to plug that USB cable into your Extreme base station. I have the Extreme ABS that looks like a flying saucer. I plug the usb cable into the port that has the symbol that doe NOT look like this <--> rather it looks like a Saguaro cactus.
    My computer then sends print documents to the Extreme via WiFi and then Extreme sends them to the printer via the USB cable.
    If your Airport status is not showing in the Mac's menubar go to system Prefs/Network/Airport and check a little box so it will show up in the menu bar.
    Now if your Extreme is plugged in the wall and powered up your Mac should be able to find it. Click on that menubar item for Airport and scroll down and select your Airport Extreme. I don't know for sure what its name will be. It should still be the same as it used to be when you used it last.
    Now try printing a simple document. In the print dialog window you should be able to select what printer you want to use. If your new Extreme printer is listed select it. You may need to click on Print & Fax and figure out how to select it from there, and choose it to be the new default printer.
    I think this info will do the job. Whenever you want to print you have to go to the Airport icon in the menubar and change your airport connection from your Verizon stuff to your Extreme. Then of course you have to change back when you are done. That is why it would be great to toss the Verizon WiFi radio out the window and just plug your Verizon modem into your Extreme WiFi radio transceiver (router). But I understand you cannot deal with that at this time.
    If this does not do the job, if I have missed something, I will bet you 5 bucks that you can still figure it out if you just look at any error messages and/or look at the Print&Fax prefs and the Print dialog windows etc. and see what I may have missed. Maybe you have to go to SystemPrefs/Sharing and allow your printer to be shared. I don't think so. The way I figure any of this stuff out is to just look at stuff and think and try things and see what happens.
    Your Verizon setup should be something like this.... a cable comes into your house and goes to a 'modem'. From there and ethernet cable (CAT-5 cable) goes from that modem to your Verizon router (WiFi radio transceiver).
    As for getting rid of the Verizon router, when you are ready to give it a go, simply unplug the ethernet cable (it has a plug on the end that looks like the kind of plug that telephones use to plug into the wall, except it is a bit wider, but still has that same kind of snap-lock tab) that comes from the Verizon modem (the modem has the heavy round cable and probably many blinking lights) and plug it into the Extreme. Mine has an icon on the Extreme that is many dots in a circular pattern.
    At this point you may have to unplug the Verizon modem form the wall AC power and the Extreme also. Then plug them back in, wait a minute, go to your Airport icon on your Mac menubar, Select Extreme and start surfing the web.
    It really is that simple with a Mac. Maybe Verizon has found a way to make things difficult but my guess is no. Any password should be taken care of in your Airport Setup Utility program. It should be the same password(s) as you used before when you used your Extreme.

  • Macbook does not see airport extreme base station

    Hi
    I set up my airport extreme several years ago.  I recently noticed that, under "security," the guest network says "WPA2 secured," but the main network says "none."  Is this a problem; i.e., does the main network lack security?  Further, when I open the airport utility, it cannot find a base station.
    What am I doing wrong?
    Thank you!
    ron

    Bob - Thanks so much for your quick reply. I followed your suggestions and, to go into perhaps unnecessary detail, I'll write what I did. I completely disconnected the Airport Extreme Base Station (AEBS) from my computer. I disabled Windows Firewall, uninstalled my anti-virus program, and uninstalled Airport Utility and Bonjour, recycled by cable modem (took out the battery and unplugged it for about 20 seconds), then restarted my computer. After the computer booted up, I verified that windows firewall was disabled, reinstalled Airport Utility and Bonjour, then reconnected the cable connecting the AEBS to the computer (to one of the three ethernet ports, and I tried each of them in case one was faulty) but not to the cable modem as my firewall was disabled and had no anti-virus software. I also reconnected the AEBS power chord. I opened the newly reinstalled Airport Utility software and it did not find the base station. Only when I used "configure other" was I able to access the AEBS. I recycled the modem again, but that did not help. I turned on the firewall, installed anti-virus software, connected the AEBS to the modem, the light turned green, and I was able to access the internet on the primary computer and the wireless network gave me internet access on my laptops. But I was still not able to have my main computer, the one directly connected to the AEBS able to see it, and configure it, without utilizing "configure other."
    Also, any idea why one of my laptops can only access the "guest" network? When it attempts to connect to the primary network it will stay on "acquiring network address" for what seems a few minutes, then switch to the "guest" network and connect immediately.
    Any help would be greatly appreciated.

  • Configure TC and Airport Extreme Base Stations with different channels

    I had to do some serious workarounds to use the Airport Extreme Base Stations as an access point with the same wireless network name primarily due to channel overlap.  I thought I would post my results here since I didnt' find a good article online.
    Also, I found the Snow Leopard verison (5.4.2) of the Airport Setup Utility far superior to Lion's Airport Utility (6.x) in terms of advanced setup. 
    Setup is a 3 flloor house where the 3 wired network locations have wireless overlap.  The problem was that the access points would not hand off the wireless signal because the channels for each airport/TC were automatically set to the same channel.  In non-apple setups, this is how you force a wireless client to switch access points (since the wireless software on your client/mac/windows can detect which access point is stronger and moves to the alternate channel.
    Using apple's "Extend this wireless network" option removes any ability to manually configure wireless channels.  I am writing this from memory, so feel free to ask questions and I will track this topic:
    Procedure
    Setup time capsule as your base station.  Do all the setup for your wireless and guest networks.  Manually configure the network and change the wireless channel to a specific channel for a/b/g networks (e.g., 3) and n networks (e.g, 167).
    Plug your first airport extreme/access point into your wired network.  Do not plug it into the "internet" ethernet plug, use one of the 3 ethernet switch locations
    Use the airport utility to first configure it to "extend" your wired network. 
    Then, go in and reconfigure it manually in the airport utility.  Choose the option to setup a "new network" and name the network the same as the TC wireless network name, security, etc.
    Change the channel from "auto" to a different channel than the TC (e.g., 6 and 137). 
    Now go to the top tab and click on the "internet" icon
    Go to the DHCP tab and change it to "bridge mode."  This will tell the AE to not give out IP addresses (the TC will do this for you).  If you get an error that the IP ranges conflict, you have not done this
    Note that if you have a guest network setup, you will need to set this up on the AE as well. 
    Now test your airport setup.  Take your client (macbook, iOS device) and connect to your network.  Move to a spot near the TC and pull up a web page.  Keep an eye on the signal strength and beginv moving toward the AE.  Refresh the page as you move around.  You should at some point see the signal strength increase.  Refresh your page again.  You should be now connected to to the AE.  I have found that Macbooks do a better job than iOS devices because you get an extra signal bar to measure strength, and they have larger antennas which allows you to better measure problems with handoff
    Another test you can do is to start backing up on your TC and then test the move.  The handoff will truly show you that the TC is handling the process but the AE is relaying to the TC for backup.
    If you need to setup another AE, simply follow setups 3-10.
    I hope this helps others.  I've done this setup 100 times on Linksys devices and although they are cumbersome, they at least allow me to do this setup much more quickly and easily than the apple products. 

    I had to do some serious workarounds to use the Airport Extreme Base Stations as an access point with the same wireless network name primarily due to channel overlap.  I thought I would post my results here since I didnt' find a good article online.
    Also, I found the Snow Leopard verison (5.4.2) of the Airport Setup Utility far superior to Lion's Airport Utility (6.x) in terms of advanced setup. 
    Setup is a 3 flloor house where the 3 wired network locations have wireless overlap.  The problem was that the access points would not hand off the wireless signal because the channels for each airport/TC were automatically set to the same channel.  In non-apple setups, this is how you force a wireless client to switch access points (since the wireless software on your client/mac/windows can detect which access point is stronger and moves to the alternate channel.
    Using apple's "Extend this wireless network" option removes any ability to manually configure wireless channels.  I am writing this from memory, so feel free to ask questions and I will track this topic:
    Procedure
    Setup time capsule as your base station.  Do all the setup for your wireless and guest networks.  Manually configure the network and change the wireless channel to a specific channel for a/b/g networks (e.g., 3) and n networks (e.g, 167).
    Plug your first airport extreme/access point into your wired network.  Do not plug it into the "internet" ethernet plug, use one of the 3 ethernet switch locations
    Use the airport utility to first configure it to "extend" your wired network. 
    Then, go in and reconfigure it manually in the airport utility.  Choose the option to setup a "new network" and name the network the same as the TC wireless network name, security, etc.
    Change the channel from "auto" to a different channel than the TC (e.g., 6 and 137). 
    Now go to the top tab and click on the "internet" icon
    Go to the DHCP tab and change it to "bridge mode."  This will tell the AE to not give out IP addresses (the TC will do this for you).  If you get an error that the IP ranges conflict, you have not done this
    Note that if you have a guest network setup, you will need to set this up on the AE as well. 
    Now test your airport setup.  Take your client (macbook, iOS device) and connect to your network.  Move to a spot near the TC and pull up a web page.  Keep an eye on the signal strength and beginv moving toward the AE.  Refresh the page as you move around.  You should at some point see the signal strength increase.  Refresh your page again.  You should be now connected to to the AE.  I have found that Macbooks do a better job than iOS devices because you get an extra signal bar to measure strength, and they have larger antennas which allows you to better measure problems with handoff
    Another test you can do is to start backing up on your TC and then test the move.  The handoff will truly show you that the TC is handling the process but the AE is relaying to the TC for backup.
    If you need to setup another AE, simply follow setups 3-10.
    I hope this helps others.  I've done this setup 100 times on Linksys devices and although they are cumbersome, they at least allow me to do this setup much more quickly and easily than the apple products. 

  • Problem consistently printing via new (summer 2011) AIRPORT EXTREME BASE STATION and Brother wireless printer (model HL5370DW). What am I doing wrong?

    Thanks in advance for any help you folks can offer. I'm a newb here and will try to offer as much detail as I can about the dilemma at hand.
    Scenario: Home network has been recently set up for wireless internet access via NEW Airport Extreme Base Station (purchased September 2011). Units accessing the network include: 2011 Macbook Pro, 2011 Macbook Air, 2007 Macbook, 2009 Macbook Pro, 2 iPhone 3GSs, and a 1st-gen iPad (and a partridge in a pear tree AEBS is configured to run WPA2 encrypted network, as well as a WPA2 guest network. I am attempting to yoke a BROTHER HL5370DW wireless B or G/ ethernet / usb-capable printer to the main network such that any and all units can print wirelessly or its equivalent (i.e., via printer hooked to AEBS through USB hub)
    Problem: Despite configuring the Brother printer to recognize the main WPA2 network I created, I am unable to get wireless printing to work. My workaround was to physically connect Brother printer to AEBS via USB, specifically using a Belkin USB hub (after all, I wanted access to usb drives, as well as the printer). This workaround works ONLY SOME OF THE TIME. Generally, after a fresh boot of any computer or after a restart of the AEBS, any given computer will be able to print (i.e., any computer wirelessly connected to the main WPA2 network recognizes the printer). HOWEVER, at random times, printer access is gone (as is access to USB drives connected to AEBS's usb hub). Wireless networks are still up and running when that happens. IS THERE A WAY TO GET THE USB HUB's devices (i.e., printer and usb drives) to ALWAYS REMAIN AVAILABLE AS LONG AS THEY STAY CONNECTED TO THE AEBS? In other words, what accounts for the intermittent loss of the usb peripherals?
    Sometimes, I just shut the airport off on whatever computer is having this problem, and the problem goes away. Sometimes, the problem is present across all computers in the house, sometimes only a few are affected. I can ALWAYS see the AEBS in the Airport Utility if the AEBS is connected to the particular computer via ETHERNET CABLE.
    My theories:
    - true wireless printing (i.e., without usb hub workaround) doesn't work because the N network somehow isn't backwards compatible with the Brother printer, which, i believe, is B/G. Although...isn't Wireless N networking supposed to work with BG devices? I did find a thread (https://discussions.apple.com/thread/2570774?start=0&tstart=0 ) that explains some of the particulars of WPA2 encryption and Wireless B/G issues, but it was beyond my level of comprehension (I'm a psychologist, but not an Apple Genius
    - The usb workaround is only intermittently viable because of some flaw in the Airport or Airport Utility that causes dropouts to happen when a Macbook Pro or Air's lid gets closed or one gets opened after having been at a different network (e.g., at my office).
    QUESTIONS:
    - Should I try to use my old router (7 year old Linksys WRT54G) as an access point and connect the Brother printer to that G-router? How do I do that?
    - I wouldn't mind just relying on the usb hub method if I could just insure more consistency (i.e., no random dropouts of peripherals). How could I do this?
    Rule out:
    - wireless printing works on my printer - it was being recognized back before the AEBS. I had the Linksys router running a WEP network and had the wireless printer talking with no cables to the router and the computers. (I just don't want to revert to using WEP encryption given its lack of security and my trying to protect HiPAA related health information on behalf of patients)
    Any help will be greatly appreciated.
    Thanks in advance!

    13 ASCII characters = 104 (aka 128)-bit WEP
    encryption
    If turning off WEP works, then you just need to
    provide the cameras with the "Equivalent Network Password".
    One of the problems with WEP is that the actual
    standard relies on a 10 character HEX key for 40bit
    WEP and a 26 character HEX key for 128bit WEP.
    In order to make things easier, vendors use certain
    algorithms to convert simple alphanumeric passwords
    (or passphrases) into HEX keys, thus enabling the use
    of simple easy to remember WEP password rather than
    lengthy HEX keys. The problem is that different
    vendors use different algorithms to generate the HEX
    key and therefore a ASCII password on an AEBS will be
    hashed differently on a non-Apple client and vice
    versa.
    You may find the following article helpful:
    - Apple article, especially the part about
    "Third-party client to Airport".
    Brilliant idea about trying the system with No encryption on... that DID solve the problem... almost.. once I turned off the encryption option, and restarted the Airport, I got a dialog box showing that the "Base station needs attention" but it didn't indicate WHAT kind of "assistance" it needed. Nonetheless, I closed out of the Airport program only to find that the indicator light, which had been Green, was now, flashing Yellow and I could not connect anything, including my computer. I opened the Airport program again and found the ONLY way I could get the Green light on was to select some sort of encryption option... then the light would go Green again but my cameras would not hook up again, and when I went back in and ONLY changed the option to NO encryption, I got the yellow flashing light and the "this base unit needs attention" warning...
    I think your suggestions are almost on the mark... is there any way of reconciling the WEP coding between the cameras and the Airport??? Or turning off the encryption option and STILL have Airport work?
    Thanks again for your help and suggestions... I really appreciate it.
    geoff

  • Mac Book pro can't connect to Internet through Apple airport extreme base station

    I had problems connecting to the internet in the past with my macbook pro.  One day it suddenly started working again but then I bought a second apple TV I lost connectivity.  I have tried changing the IP address manually and while it shows me connected to the wifi I am still with out internet.  When I hooked up the new Apple TV that I bought it booted my computer from it's ip address.  The apple TV though wouldn't work and now nor would my computer.  I ended up setting the Apple TV's ip address manually and now it works fine. My computer on the other hand does not no matter if I set it manually or not.  Even if I plug in the ethernet cable from the base station it doesn't work.  It show that it has a self assigned IP address.  After I set it manually it shows that I am connected both via wifi and the ethernet cable but I can't connect to the internet.  If I plug the modem directly into the computer bypassing the base station I get internet and it is using the IP address that worked originally.
    It has something to do with the connection from the base station to my computer but this is odd considering every other device I have: iPhone 4, apple tv, apple tv, apple mini with retina display all work perfectly via wifi (newest apple tv had to be set manually as I stated above but now works fine).  When I check the ip of the base station itself it seems to be different from the ip of the computer when the computer was connected directly to the router.  I don't understand why my computer now can't connect to the internet via the base station whether it be wifi or by ethernet.  Can you please help me trouble shoot this?
    I have an AirPort Extreme base station which allows up to 50 users and a 30 meg connection speed.
    I have a MacBook Pro (17-inch Early 2009), OS X Mavericks (10.9.2)

    It has something to do with the connection from the base station to my computer
    I don't think so..
    I just posted a reply which totally vanished.. strange strange website now.
    Please post some screenshots of your AE setup from the airport utility.. I want to see the summary page, then the network and internet tab.
    Please tell us what modem you use.. is it a router??
    If you have satellite or 3G wimax etc service they often are limited to 5 IP addresses... the AE takes one and then 4 more devices can join .. no more.
    You need to also give us the screenshot of the IP you are getting in a computer that works.
    EDIT
    Sorry this is half double post.. the previous page refused to display.. now it has returned..

  • Hi I have an airport extreme base station And trying to dial on windows

    Ok I have a airport extreme base station the one with dial-up modem and power over ethernet. Well i have people PC as my provider, and can dial the connection on my macbook by using internet connect. but on my hp i can not. I have tried to create a connection type on it and cant figure out how to have it connect like on internet connect. tho i can go the admin utility and click automatically connect and click OK and it dials the connection to disconnect i re click it and click OK and it disconnects but i do not like it that way. So what am i to do and is their a internet connect app for windows. I have also contacted apple and hp and that did not help. Feedback welcome and is needed.
    Thanks to all that leave feedback

    If you are using dial-up.
    Jon Sevy has a Java Utility for this purpose.
    You will need Java in order to run the utility
    http://www.java.com

  • How can I extend a wireless network with my AirPort Extreme Base Station?

    Today I purchased a brand new, dual-band base station to replace my Belkin N router, as I have had a handful of firewall, coverage, and other networking problems in my house lately. First off, I really like this router and it was very easy to setup. My MacBook Pro could use both bands and established a 300 Mbit/s link very quickly. After tweaking various settings to my liking, I was also able to maximize the connections on many of my non-Apple machines and devices. I noticed that the range of its network was better than my Belkin's, but unfortunately, it failed to completely saturate the area sufficiently. Since the Belkin still works well enough, I was hoping I could bridge them together one way or the other.
    The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct? I would like to place them at opposite ends of my home so I can get strong WiFi signals everywhere inside. However, when I try to get the base station to connect to my preexisting WiFi connection, it tells me that I can't extend the network and fails to join.
    So is this possible? And if it is, how would I go about setting it up? I know it would probably be easier if I had a simple range booster such as an AirPort Express, but I didn't buy one while I was at Fry's since I hoped I could make use of the older Belkin. This is its product page, if needed. Thanks for any suggestions.
    -MacUser

    The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct?
    Sorry, but no. The AirPort Extreme Base Station cannot "join" a network like the AirPort Express or Time Capsule, but you wouldn't want to do this anyway because in this configuration these devices will only perform as wireless clients ... not routers.
    Instead, the AirPort Extreme can either be extended or can extend another 802.11g or 802.11n AirPort ... or a very very few non-AirPort devices.
    One option for your Belkin would be to connect it to the AirPort Extreme by Ethernet but this may not meet your requirements or be a desirable situation. Otherwise, you would need to get another AirPort to extend your current one.

  • How to add Ethernet ports to an Airport Extreme Base Station?

    I have successfully connected an HP Office Jet 6310 to the Airport Extreme Base Station, after downloading the latest software from HP. It is printing wirelessly, and it is great so far.
    The only problem is that the cable modem connected to ADSL has only one Ethernet port, and the Airport Extreme Base Station also has one Ethernet port. However, I need one more port to connect a phone (Vonage Telephone Adapter = VTA).
    What is the easiest way to achieve this? I saw several other messages discussing hubs and routers, but the answer is not clear yet. If I purchase an additional router, should it be connected between the cable modem and the Airport Extreme Base Station, or the other way round?
    Any help or advice would be appreciated!
    Thank you in advance for your time.
    MacBook Pro with 1.83 GHz Intel Core Duo   Mac OS X (10.4.7)  

    One final vital piece of information, which should be my conclusion on this topic.
    Following the advice received, I purchased a Switch from Linksys. Since the device didn't work for my purpose (dividing the Ethernet connexion into an Ethernet line for the HP printer and the Vonage phone), I called the Linksys support.
    I was told that what I needed was not a switch, but a router. I thus had to get reimbursed for the switch and hunt for the proper router.
    Finally, today, I have been able to find the item corresponding to my needs:
    A Belkin Wireless G Router F5D7230-4
    It costs less than 50 US$ and has all the necessary Ethernet ports. The setup is very simple, and I got it operational within a couple of minutes, despite some small problems getting the setup Wizard to work. It is Mac OS X compatible.
    Thus, at the end, I have got the HP 6310 Office printer and the Vonage VTA phone working together, with a robust Wireless network including WPA security. I would recommend this type of setting.
    The only trouble is that the AirMac Extreme Base Station has become completely useless! I will perhaps keep it as a souvenir, or as a decoration in the living room... This wouldn't have happened if the creators of this nice object, which is extremely expensive for what it provides, would have thought of including at least two Ethernet ports!
    The unexpected reply to my query could thus be ironically formulated by saying: "replace the Airport Extreme Base Station with a cheaper an more efficient device." Sorry for that!
    With my best regards to those who took the trouble to read this thread to the end.
    Yours, Hotaru

  • Printer and AirPort Extreme Base Station with Gigabit Ethernet

    Hello!
    I own a macbook, one windows xp pc, and two windows vista notebooks. I bought a airport extreme base station. I set it up with my macbook at first and I do a print and it works. I do the same with the others. I install the printers drives to all notebooks. Then tried to print and only one of them worked. They all have bonjour download for windows. So i restarted all the pc's and mac and tried to print and never prints. On the pc's i get a error message. On the mac i get an its busy and never prints. All of them connect to the internet, but no printing. I have the printer connected to the base station. I did two prints and then I couldnt print after that. Internet works. Please i need some help to fix this. Thanks in advance

    Hi
    Maybe you already have fixed your printing problem. I'm no expert but I sometimes have had printing problems and I feel for you. However, first of all. What sort of printer do you have? It sounds to me that one of the pc printing documents got stuck somewhere on its way to the printer and now it is taking up space on the network (figuratively speaking ofcourse). I can recall something happening to my network/printer some years ago. Unfortunately I can not remember what I did to fix the problem but if I were you I would do the following: First I would disconnect the pc from the network and then try to reset the printer clearing its print memory. Then I would try to get the mac to print again. If succesfull I would take the mac off the network and connect one of the pc's and get that to print. If I succeded I would repeat the procedure with the other pc's. If I wasn't succesfull I would clear the memory again and then try with one of the other pc's. But I would only try one computer at the time to try to isolate the problem. Maybe you have already tried this and since pc's are a mystery to me I dont't know how to help you in that department. However using bonjour on the pc's I would not expect to have problems (though I use Windowc XP print menu on my vertual pc - works fine).
    Hope that you will solve your problem soon.
    Berit

  • Recognizing a printer attached to an Airport Extreme Base Station

    I have attached a printer to the usb port of my airport extreme base station. The printer is recognized by two of my MacBook Pros running Mac OS X version 10.4.11. However, it is not recognized by my latest MacBook Pro running 10.5.2. Is this a problem with the new system, or is there another reason? I have, of course, made sure that the printer drivers are installed, and the printer attached to the Airport works with the new MacBook Pro when connected directly through a usb port on the laptop. Any help will be gratefully received!!

    samandlily wrote:
    I have something related to this topic going on. I have an Epson printer on my Airport Extreme via a USB. Just recently when I try to print from my iMac, I get a message saying that "the Airport Network is busy, and it will try again in 10-20 seconds". Then nothing happens and the document will not print. Any ideas what is going on?
    Please do not pollute the OP's thread by posting here. You are clearly experiencing a different problem - different symptoms, different version of OS X, different printer - and will get much better help if you start your own thread because your problem will get lots more attention that way.
    - cfr

  • Airport Extreme Base Station and 2wire Modem / Router

    I have Yahoo DSL with a 2wire modem / wireless router combo. I have an iMac and a MacBook both running Leopard. I can't seem to get the Back to my Mac feature to work. I'm currently running the trial version of .Mac. I'd like to get a full .Mac account but I want to be sure I can utilize the Back to my Mac feature. If I were to bridge an Airport Extreme Base Station to the 2wire would that solve my issue with Back to my Mac. Additionally I like the idea of being able to plug a printer of external hard drive into the Airport Extreme.
    Any advice is greatly appreciated.

    I got it to work. I purchased the Airport Extreme Base Station and took the following steps which I found here http://forums.macosxhints.com/archive/index.php/t-68141.html
    First connect directly to the 2Wire with the Ethernet cable.
    Instructions from 2Wire:
    1. Clear the HomePortal to Factory State –can be accomplished two ways
    2. Go to http://homeportal/management
    3. Click on Resets
    4. Click on Reset to Factory State
    5. Click Continue
    6. Have customer press Hardware Reset button with paperclip (HG products only and BellSouth HWs)
    7. Have customer unbend a paperclip
    8. Have customer insert paperclip into recess for Hardware Reset button (outlined with Red circle) on back of HomePortal.
    9. Hold paper clip in for ten (10) full seconds
    Next steps:
    1. Go to http://homeportal/management again
    2. Click on Configure under Broadband Link
    3. Enter VPI 0 and VCI 35
    4. Click on Disable PVC Search
    5. Set Connection Type to Direct IP
    6. Click Submit/Save
    7. Have cu go to http://homeportal/management
    8. Click on Configure Services
    9. Have cu Uncheck Enable Routing
    10. Click Submit
    Airport configuration:
    1. Open the AirPort Admin Utility and select your Base Station.
    2. Click Configure and enter your password.
    3. Click the Internet tab.
    4. Choose PPP over Ethernet (PPPoE) from the Connect using pop-up menu.
    5. If required by your ISP, enter your user name, password and service name in the appropriate fields. ( Your name and password is you full email including the @sbcglobal.net part and your email password)
    6. Click Update.
    7. After the base station restarts itself, quit the AirPort Admin Utility.
    If that doesn’t work call apple and they should be able to help with the airport configuration.
    Back to My Mac now works. Hope this helps someone else.
    Message was edited by: WalrusBoy

Maybe you are looking for