Macbook Whining issues also is there similar QuietMBP for Vista?

Hi guys I'm just whining about (no pun intended) the macbook cpu whine noise on my newest generation Macbook 13" 2.0GHz.
First of all, I first bought a 13" Macbook back at the end of May, it had the whine so I called up Apple Store and had it swapped for a new one since it was less than a week old. But with this new macbook, the whine has developed and it has been over 30 days and I definitely won't be able to return it for a new one.. first of all can I ask how common is this issue, this is my second Macbook and I'd expect the whine to be acutally rare but looks like it happens on the majority of them?
Also do you guys recommend to get it repaired? What are the success rate of fixing the whine completely? My Macbook is still practically new and I'm worried the service-person might not be very careful with it and damage it comestically.
Lastly If I have to put up with the whine I don't mind using QuietMBP. However do you guys know similar program for Windows Vista? Since it whines on Vista too (due to CPU throttling I guess) as I use Windows often for various programs I use. Thanks in advance.

i would get a new one if it bothers you that much. my macbook does it very rarely, and very quietly. not noticable. get a new one. apple replaced my macbook 5 times...yea 5 lol

Similar Messages

TS4436 hi, when zooming in to capture still images, the image is really blurred and out of focus. is this a hardware issue and is there any solution for this?? or is my device faulty?

hi, when zooming in to capture still images, the image is really blurred and out of focus. is this a hardware issue and is there any solution for this?? or is my device faulty?

If you are using the iPhone camera zoom then remember that this is a digital zoom not an optical zoom. The zoomed in area will have fewer pixels and not appear as clear. The more you zoom the worse it gets. It's like cropping a picture after it has been taken.

The letters and numbers are not forming properly, do I have an compatibility issue? Is there an adjustment for this? My computer programs and explorer are ok.

If i move the curser over the letters or numbers they snap up bright. In about 30 seconds they go back to the blurry state. This only happens on Firefox. not explorer or my regular computer programs.

Hello,
First you have two Shockwave Flash and Adobe Shockwave for Director Netscape installed in your computer:
*Shockwave Flash 12.0 r0
*Shockwave Flash 11.8 r800
*Adobe PDF Plug-In For Firefox and Netscape 11.0.06
*Adobe Shockwave for Director Netscape plug-in, version 11.5
So, try disable the hardwareacceleration:
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Also:
*[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in safe mode]
*[http://www.mozilla.org/en-US/plugincheck/ Plugin check]
*[https://support.mozilla.org/en-US/kb/remove-recent-browsing-search-and-download-history Clear recent history]
*[https://support.mozilla.org/en-US/kb/how-do-i-create-screenshot-my-problem Create a screenshot of the problem]

Some water got into my iPhone4 and now the home button is having issues. Is there a fix for this?

As the title says, my home button is having issues that started after some water got into my iPhone4. It takes about twenty attempts before it will register that I hit the home button. It is not under warranty anymore. Any help or suggestions on how to fix the problem would be appreciated. Thanks

Take to Apple and have then check.
If it is damage you will be charged for the replacement since the warranty does not cover damage.
Allan

Is there a Fix for Vista 64 w/GB RA

Hi,
I see quite a lot of topics on this issue and before I install any I would just like to know is there a fix?
I see the Creative have released a new driver update and also Daniel_K so can someone who has 4GB of RAM please post the best driver!
thanks
Danny

I dont know if my problem is appropriate for this thread, but I will place it here hoping that someone can help me. I have been suffering from the hissing, popping and crackling from my X-Fi Platnum ever since stepping up from 2GB to 4GB RAM. I saw that a new driver was out for my OS so I jumped on it. Now I cannot get my sound card to work at all (other than simple windows sounds). Windows Vista cannot find the drivers I just installed...after I rebooted, for two separate devices (see link to screen shot).
I already tried uninstalling them from the control panel and reinstalling them, but the same error happens.
http://gallery.filefront.com/RampantPiper//790756/ My system:motherboard: ASUS A8N-SLIprocessor: AMD Athlon 64 X2 4400+ 2.2GHzRAM: 4GB Corsair SDRAMVideo: XFX GeForce 8800UltraSound: Creative Sound Blaster X-Fi PlatnumOS: Windows Vista 64-bitPower: 000W

Is there an solution for the wi-fi internet connectivity using a MBP?

I have frustration while trying to stay connected to the internet. I bought this MacBook Pro thinking the technology was far superior to other notebooks. Now I have realized the wireless connectivity issue is something tech support has been unable to solve. This is a basic option on most new notebooks and none of the other brands in my home have this issue. Is there any help for me or am I stuck?

Can you connect to public wifi? Have you tried updating your router's firmware? Have you tried using a different channel? What security are you using? What model router do you have?
I don't have and I am not aware of any systemic wifi connectivety issue.

Can someone please help. I have a really old MacBook that is running really slow. I want to wipe everything and reinstall the latest software but don't know how to do this. Also is there a way of keeping Microsoft Office when doing this? Thanks in advance

Can someone please help. I have a really old MacBook that is running really slow. I want to wipe everything and reinstall the latest software but don't know how to do this. Also is there a way of keeping Microsoft Office when doing this? Thanks in advance

You do realise that wiping the disk means that everything on the disk is erased. Everything. Photos, music, emails, ...
So the first piece of advice is to make sure you have a back up of everything.
You need the OS disk to reintsall the operating system. You will use that disk first to erase the drive, then to reinstall the OS.
Here's the link for the US. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
As for MS Office, you will need the original disk that it came on to reinstall it.

Hi, my Macbook Pro isn't charging when I plug in my charger and the light on the charger thing isn't lighting up. How can I tell if the charger or the computer is broken? Also, is there a way to fix it? Thanks.

Hi, my Macbook Pro isn't charging when I plug in my charger and the light on the charger thing isn't lighting up. How can I tell if the charger or the computer is broken? Also, is there a way to fix it? Thanks.

Not sure how I would tell if the contacts are stuck, but they look normal. The other stuff:
Battery Information:
Model Information:
Serial Number:    W0046Q08UBX0A
Manufacturer:    SMP
Device name:    bq20z451
Pack Lot Code:    0000
PCB Lot Code:    0000
Firmware Version:    0201
Hardware Revision:    000a
Cell Revision:    0157
Charge Information:
Charge remaining (mAh):    3211
Fully charged:    No
Charging:    No
Full charge capacity (mAh):    5845
Health Information:
Cycle count:    943
Condition:    Normal
Battery Installed:    Yes
Amperage (mA):    -1354
Voltage (mV):    11210
System Power Settings:
AC Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    10
Wake On AC Change:    No
Wake On Clamshell Open:    Yes
Wake On LAN:    Yes
Display Sleep Uses Dim:    Yes
GPUSwitch:    2
Battery Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    2
Wake On AC Change:    No
Wake On Clamshell Open:    Yes
Current Power Source:    Yes
Display Sleep Uses Dim:    Yes
GPUSwitch:    2
Reduce Brightness:    Yes
Hardware Configuration:
UPS Installed:    No
AC Charger Information:
Connected:    No
Charging:    No

Can not take a screenshot with Maverick and track pad. can not use apple chat to talk with a tech. there are other issues also like I used to be able to go back a page with the delete button. No Maverick PDF to instruct on how to use Maverick

Can not take a screenshot with Maverick and track pad. can not use apple chat to talk with a tech. there are other issues also like I used to be able to go back a page with the delete button. No Maverick PDF to instruct on how to use Maverick
THE use of the apple support is a mess also.
I want to be able to use my MAC fully and easily like I used to with Snow Leopard.
What is wrong with this maverick OS?

The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

My macbook has no sound when i go to system preferences there is a tick on mute and i cant take it off and it also says there is no input device do you know what to do.

My macbook has no sound when i go to system preferences there is a tick on mute and i cant take it off and it also says there is no input device do you know what to do.

Might be corruped sound preferences ..
Type or copy paste the following;
/Library/Preferences/Audio
Click Go the move both .plist files from the Audio folder to the Trash.
com.apple.audioDeviceSettings.pllist
com.apple.audio.SystemSettings.plist
Restart your Mac. See if that made a difference ...

We have an "old school" DVD player (Sony dvp-nc80v) that plays music throughout our home. Is there a connector that we can purchase to hook-up our iPhone or MacBook Air to also play music until we buy some new equipment?

We have an "old school" DVD player (Sony dvp-nc80v) that plays music throughout our home via connection to multiple embedded speakers. Is there a connector/piece of hardware that we can purchase to hook-up our iPhone or MacBook Air to also play music until we buy some new equipment?

A crude but effective way would ,assuming the Sony has an AUX in ,
is a stereo bluetooth receiver
plugs into aux and recives music over B/T from
the iPhone etc ,as used by many in vehicle
For instance as an example
http://www.amazon.co.uk/Belkin-F8Z492cw-Bluetooth-Music-Receiver/dp/B0037LHUSE

Is there a fix for the MBP wireless dropping issue?

I began to experience the Macbook Pro dropping wireless connectivity on my very 1st Apple in 2008. At the end of the day my machine was replaced with a new Macbook Pro mid 2010. It appeared to be working just fine until about 2-3 months ago when I started dropping my wireless printer connection. I searched the internet hoping for a driver update from HP or something from Apple and each time I found something, the problem still existed. I even thought that by upgrading to Lion would resolve any issues that I have with my MBP wireless connectivity issue. After upgrading to buying a new router, new printer and upgrading to Lion; the wireless dropping issue still remains unresolved! I know there are several hundred in not thousands of people who are having the same problem so what are we supposed to do?
When my 1st MBP was replaced in 2010 I had to stop working because I was diagnosed with "Failed Back Surgical Syndrome" and was in the process of applying for disability. Something in the back of my mind said that I needed to purchase Apple Care for this new replacement however I had used all of my savings & retirement to sustain life for me and my family that there was nothing for Apple Care. If it weren't for my church and family I am not sure what I would do during the 18 months of no income while waiting for a decision only to receive an appeal until I findly stood in front of an Administrative Law Judge who heard my case and granted me disability. Besides there was no way I could ask anyone for money to purchase a warranty for a top of the line laptop while the country was falling off an economical cliff.
I broke down and called Apple Support and was told that I qualified for technical assistance regarding the upgrade to Lion a few weeks ago. The tech on the phone had me run some disk utility tests and had me repair permissions which she said could be the cause of the problem. I willingly went along with her in hopes that this was indeed the fix. However, within 10 minutes of hanging up the phone my MBP began to drop it's wireless connection to my new HP printer and also the Internet. Hence my question above is what I am really looking to have answered! What is the fix to this problem that so many people are having issues with? I couldn't afford to purchase Apple Care back in 2010 and I can't afford to purchase a new 2011 machine today if that truly is the fix!
I will be disabled for the remainder of my life and I have grown dependent upon my computer to stay in touch with friends and colleges from work. I worked for the IT Group at Wynn Resorts and I can say that the type of service Appple is providing it's customers is not what I learned over the past 25 years with Mr. Wynn. Why can't Apple get the simple concept that it's customers are it's life line and keeps them in business. I need help and I don't know what to do nor where to turn. It would be different if Apple acknowledged the issue and said they were working on it however they aren't. I plead to Apple to help me fix my notebook so I can stay connected to the outside world vs. couped up inside my home.
Best Regards,
Scott Leavitt

I am simply lookig for some help not an argument. I am not an RF specialist however have setup a few wireless networks in my tenure at Wynn Resorts. I fully agree that wireless networking is an art and a science however the powers that be in Network Land have toughted wireless networking is the easiest and quickest way to get two computers to talk with one another. As I previously said I have already turned one (1) MBP in for this problem and Apple decided to replace it because they could not fix the problem with my particular MBP. This MBP was running Leopard when the problems started
I am having a hard time believeing that there are several other devicces in my home that depend on a wireless network to operate and my MBP is the only one having an issue. I took this a step further and decided to see what would happen if I tried to connect wirelessly via Fusion. In Windows 7 I am able to print and scan to my hearts content without any issues. I am able to browse the internet as much as I want. I close Fusion and try to connect to my printer via wireless and nothing.
In order to get Apple to help do I need to get a Network Analyzer and capture packets when I have these problems? Out of the 1000 + posts is there a consolidation of which answer is the best? BTW I am accessing the internet via a wireless connection using Fusion and Windows 7.
In response to Linc's comments, I will look at the router specifications however I did not qualify that these devices are not using the wireless connection at the same time. Right now I would guess there are maybe two (2) or three (3) at the most that are actively transmitting / receiving information. -- Thanks

HT5487 So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "inte

So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.

A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert

Before I updated today to Lion OS, my multiple monitors worked fine. Now my macbook will not detect them. Is there a solution for this?

I've been running multiple monitors for over a year on my Macbook. Updated today to Lion OSx and well Steve, it didn't just work. My macbook will not detect my three external monitors, and after scouring the last hour on Google of how to remedy this and trying the basic suggestions of restarting, unplugging, replugging, to no avail. Anyone else have a similar problem since they've upgraded to Lion OSx?

karl219 wrote:
1-Time machine seems to be coming up often in the discussions.If my backup is on my external hard drive, why would space be taken up on my macbook hard drive?
Read the first extract for the definition of backup snapshots and how they are handled by the OS.
2-Shoud I delete older backups? If for example, all I need from Time Machine is the latest backup done today, can I get rid of the 2+ yeras of backups, or do they not take up that much space?
No. Time Machine should be on a separate HDD and will take care of deleting backups when necessary on that drive.
3-Back to the issue, considering I don't have access to a an apple store for the next few months, what is my best plan of action?
I would consider installing a larger internal HDD. Capacities to 1 TB are now available.
4-I am considering buying a new macbook 15inch, and get more space, however, I'm scared that the same problem will happen again. Is this common on all macs? Will using Time Machine to "Restore" my backups bring along the issues as well?
All Macs using Time Machine will experience the same conditions. The problem is that many users do not under stand what 'Other' is and that leads to confusion. There are many essential OS files in that category that should not be touched as well as some user files. The issue is not to reduce 'Other' as such, but reduce the total amount of data on the HDD if space is becoming a premium.
Please read these two extracts:
http://pondini.org/OSX/LionStorage.html
http://pondini.org/OSX/DiskSpace.html
Ciao.

Is there a way for my macbook air (running Lion) to access an external hard drive on my Imac (running snow leopard) specifically for Iphoto and itunes?

Is there a way for my macbook air (running Lion 10.7.2) to access an external hard drive on my Imac (running snow leopard 10.6.8) specifically for Iphoto and itunes?

Yes. For those two applications specifically there is sharing. This presumes both computers are on and connected to the same network.
In iPhoto, enable sharing by (on the iMac) going to the iPhoto menu > Preferences > Sharing > check Share my photos. You can either share the entire library or only selected albums. Now on your MacBook Air, in iPhoto, go to the same preference pane and select Look for shared photos.
iTunes has something similar. In the iTunes menu > Preferences > Sharing > check Share my library on my local network. On the other computer, look in the left column for SHARED and select the iMac. You can now play that music on the MacBook Air.
There are other ways to share files but for those two applications this is the simplest way.
Best of luck.

Macbook Whining issues also is there similar QuietMBP for Vista?

Similar Messages

Maybe you are looking for