Macbook WI-FI Slow down after Screensaver kicks in
I just got this new macbook a few days ago. Everything is been working great except for this problem. I am experiencing an internet slow down after the screensaver Flurry kicks in. as long as the screen saver doesnt kick in, the internet still works fine.
Does anyone has a solution to it or experienced something similar to my problem?
Any help is appreciated. thanks in advance.
I encounter a similar problem using my girlfriends new Macbook (Intel Core 2 duo). Out of the box, i remember it working well and it was fast on my network using a Linksys WRT54G router (firmware v8.00.2). However, over the course of a few days, WiFi speeds deteriorated quickly.
This solution worked for me:
-Set the router to channel 3, 6 or 11
-Enable WEP encryption (mine is set to WEP 128bit)
-When entering the Key (key 1) into Airport prefix it with a *"$"* ie. "*$19C7B8C383489.....*" would be your key.
This is prior to adjusting settings on the router.
http://img37.picoodle.com/img/img37/5/12/15/t_macbook1m_b852f94.jpg
This is after adjusting settings on the router.
http://img27.picoodle.com/img/img27/5/12/15/t_macbook2m_7e443da.jpg
Similar Messages
-
MacBook Pro (2011) slowed down after Yosemite installed
I ran Etrecheck and got the following. Is this a memory problem or a software problem? Thanks!
Problem description:
Computer has slowed down immensely since installing Yosemite.
EtreCheck version: 2.1.8 (121)
Report generated February 22, 2015 at 12:14:43 PM MST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Late 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 173
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
AMD Radeon HD 6750M - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 86 days 1:38:58
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (302.21 GB free)
Core Storage: disk0s2 499.25 GB Online
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.leapfrog.codeless.kext (2) [Click for support]
[not loaded] com.leapfrog.driver.LfConnectDriver (1.9.8 - SDK 10.8) [Click for support]
[not loaded] com.microsoft.driver.MicrosoftMouse (6.2.1) [Click for support]
[loaded] jp.co.toshiba.driver.ToExtCmd (1.0.2) [Click for support]
/System/Library/Extensions/MicrosoftMouse.kext/Contents/PlugIns
[not loaded] com.microsoft.driver.MicrosoftMouseBluetooth (6.2.1) [Click for support]
[not loaded] com.microsoft.driver.MicrosoftMouseUSB (6.2.1) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.cmfsyncagent.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.gamed.plist
[killed] com.apple.lookupd.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.rcd.plist
[killed] com.apple.sbd.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[running] jp.co.Toshiba.autorun.plist [Click for support]
9 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.GSSCred.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nesessionmanager.plist
[killed] com.apple.periodic-monthly.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.systemstats.analysis.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
11 processes killed due to memory pressure
Launch Agents: ℹ️
[running] com.wyse.MacCompanion.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.leapfrog.connect.authdaemon.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[running] com.wyse.PocketCloud.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.leapfrog.connect.monitor.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
SpeechSynthesisServer Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
MicrosoftMouseHelper Application (/Library/PreferencePanes/Microsoft Mouse.prefPane/Contents/Resources/MicrosoftMouseHelper.app)
Google Drive Application (/Applications/Google Drive.app)
Google Chrome Application Hidden (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
CitrixICAClientPlugIn: Version: 11.4.3 - SDK 10.0 [Click for support]
SharePointBrowserPlugin: Version: 14.1.4 - SDK 10.6 [Click for support]
Safari Extensions: ℹ️
GMail Counter
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Microsoft Mouse [Click for support]
Time Machine: ℹ️
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 196.67 GB
Destinations:
TOSHIBA EXT [Local]
Total size: 999.86 GB
Total number of backups: 12
Oldest backup: 2014-09-10 22:13:49 +0000
Last backup: 2015-02-16 22:27:12 +0000
Size of backup disk: Adequate
Backup size 999.86 GB > (Disk used 196.67 GB X 3)
Top Processes by CPU: ℹ️
8% WindowServer
2% mds_stores
0% AppleSpell
0% MicrosoftMouseHelper
0% DashboardClient
Top Processes by Memory: ℹ️
107 MB discoveryd
73 MB Safari
56 MB Google Chrome
52 MB com.apple.WebKit.WebContent
39 MB mds
Virtual Memory Information: ℹ️
36 MB Free RAM
706 MB Active RAM
688 MB Inactive RAM
1.29 GB Wired RAM
300.27 GB Page-ins
9.64 GB Page-outsYou need more ram. But has it really been 3 months since you rebooted this computer? Restart it once in awhile and some of that slowness might go away.
-
Has anyone noticed MacBook Air slowing down after installing Maverick
Has anyone noticed MacBook Air slowing down after installing Maverick?
Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy -
Slow down after installing Lion OS
My Macbook pro later than 2009 model slowed down after installing the new OS Lion
any suggestions to speed it upFirst suggestion ,there have been a number of identical user questions like yours, in the Lion Community. If you want to talk to other MacBook Pro owners, try the forum they have.
http://www.apple.com/support/macbookpro
What you do not need is some gizmo to "speed up" or clean caches etc.
Maybe you need to make more room on your hard drive, or add more RAM.
For now, hold down Command-R and run Disk Utility to check the health of your system drive (Lion Recovery Mode)
http://www.apple.com/support/lion -
System Slow-Down After Printing
I recently installed Mountain Lion. Over the last couple of weeks I have noticed a significant operating system (10.8.2) slow down after printing with my Epson R3000 printer. This happens after every printing session. When I say slow-down I mean significant delays and dreading "beachballs" when opening applications, selecting menu items or anything else I should choose to do. I'm left with re-starting the computer to get going normally again.After re-atarting I have gone to "verify permissions" and I get approx "5" pages of permission errors, all associated with the printer library in some fashion or another. I then repair all those permissions and re-start my MacPro. The operating system then works as normal and I can use the computer with no problems (until I start printing again). I mainly use the computer for photo editing with Adobe Photoshop CS6, Adobe Lightroom 4 and Aperture 3.2.
I did not have this problem before upgrading to Mountain Lion (and then to 10.8.2). I did not get "significant" permission errors before upgrading. Since all printer drivers for this printer are handled now by Apple via the "new" Software Update process I can't even re-download the Epson printer driver and start over. I'm completely at a loss as to what, associated with the printer function, is causing these "significant" permission errors and subsequent operating system slow down. My printer is almost brand new and was working flawlessly before Mountain Lion. Let me be clear though, I can print fine. My problem is the system slow down after using the print function which I am only guessing has something to do with the "5" pages of permission errors after printting photos (with CS6/Lightroom/Aperture).
Incidently, I am not in any way a computer expert. Verifying and repairing permissions is about all I know how to do that's why I need help. I also just thought I would try the forums first before going to technical support to see what people thought about this.
Again, I repair the permission errors, re-start my system and all is fine. Any further suggestions would be deeply appreciated.When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Compleat system slow down after current updates
Has anyone learned why we all seem to have a compleat system slow down after the current set of updates? Everything works, but is VERY slow to respond. Even iTunes 7.1.1 plays video choppy now. Audio track plays fine however. Odd.
-Apple //GSFirst of all, try repairing your permissions with Applications> Utilities> Disk Utility. Select the hard drive you're running off of and then click the Repair Permissions button.
If that doesn't work I'd do an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
Then run the combo update(s) instead of the consecutive ones. That seems to be working for a lot of people, but it will probably take a while. -
System slow down after lion update 8/18/11
Has anyone else had a problem with their system slowing down after downloading the system update for Lion on 8/18? My system is not nearly as responsive and is only about two weeks old and have not installed any software other than Microsoft Office 2011 when I bought the machine. Any ideas?
Ok my system is booting and shutting down faster now.. This method worked for me:
First, I repaired the permissions:
1) Open up Disk Utility
2) Select your hard drive
3) Now select Repair Disk Permissions.
Then, I deleted the caches folder:
1) From the Finder's Go menu, select Go To Folder, and go to this folder: /Library
2) Delete everything inside the Caches folder (This might require the Admin Username & Password)
Finally, go to System Preferences and click on Startup Disc then click on your boot drive (In my case I've selected my HD labeled "Macintosh HD Mac OS X, 10.7.1". Now do a restart by clicking on the Restart button. If you don't have a Startup drive selected your mac will waste time at boot searching for a suitable boot drive !
I Hope this works for you as well.
Cheers! -
System slow down after upgrade to 10.10.2
Still have a slow down after updating to 10.10.2
Tried everything I can think of.
Get spinning color wheel for a long time when opening even small files. Scrolling through folders, cursor hangs for a moment. opening and saving takes much longer.
Used HD repair and repaired permissions and diagnosed HD. No problems.
Looking at Activity Monitor, I don't see anything that stand out-
-CWhen you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Lightroom workflow slows down after modifying an image
Hi fellow users,
Lightroom 4.3 runs smoothly if I work on unmodified images.
However, if I apply modifications on an image, retouching it afterwards becomes much slower, even if I render a preview AFTER I made modifications on the image.
I tell you an example: I import a raw file to the program and I render it`s preview. Then I retouch the image - it works very fast, no waiting time, no Loading overlay.
Where the problem starts: I import a raw file, I apply some modifications on it (for example a preset), then I render it`s preview - then I want to do more modifications on the image, which becomes very slow.
I was monitoring the cpu usage of the computer. In the first case, the cpu usage during modifying the image is normal.
In the second case, it goes up to 100%.
It seems that applying modifications on an image makes working on it slow, no matter if you have the most up-to-date preview or not.
Anyone knows if it is normal or not?
Is there any solution to this?
Thanks,
Tamas
My configuration:
Windows 7 64 bit (up to date)
Lightroom 4.3 64 bit
Fast PC
lightroom settings:
camera raw cache: 20gb
video cache: 10gbFirst of all, you can forget about the preview rendering, that's irrelevant. Previews are only used by the Library module, not the Develop module. In Develop, it's handled by the ACR cache.
Now, as for slowing down after initial adjustments, that's a variable I haven't looked out for. But it could well be correct (it would explain some weird results I got across two machines recently).
In general, Lightroom 4 performs well below expected standards on some systems, while others fly along, and it seems nobody can explain why. Long story, do a search on this forum and you'll come up with several lengthy threads. The problem is that there are so many variables in this that it's almost impossible to even define what "slow" means. And now you've added another (interesting) one... -
my macbook pro is slowing down!i was looking for drive cleaning applications bau i couldn't decide which one is more useful!
There are NO applications that will make your MBP run faster. At best they will have no effect, at worst they will create more problems.
Start with this comprehensive trouble shooting document.
https://discussions.apple.com/docs/DOC-3521
Pay particular attention to the Hard Drive and third party applications.
Ciao. -
I have Windows 8.1 Pro (x64) installed on Alienware M17x. The slowdown mostly appears as slow response in the situation such as open a folder/window, open/close/switch tabs in IE, drag window, and there's also cursor lag. It gradually
slows down after system boot, noticeable after 3-4 hours, really slow after 8-9 hours.
I have thought about many possible processes which can cause this issue, and then I found out that it's caused by "explorer.exe". If I kill "explorer.exe", the speed suddenly becomes normal. Then, I restart explorer.exe
again, it stays normal, and then it still gradually slows down again after hours.
I have checked driver or software compatibility. Also, CPU usage and Disk usage is normal.
Please give some advises, reasoning, or solutions.SaccoSVD
The process that is causing the problem is called sidebar.exe and I am curious why it is running on a win 8 machine as I dont believe it is built in. (It seems to have over 22,000 instances launched so I suspect either malware or a broken app)
It is usually associated with a Vista machine, or updated win 7 machine. Did you do do a clean install? Have you run a malwarebytes scan?
Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.
http://www.malwarebytes.org/products
Wanikiya and Dyami--Team Zigzag -
Illustrator begins to slow down after 10 to 15 minutes
Illustrator begins to slow down after 10 to 15 minutes, my system exceeds the minimum requirements. What gives?
Xeon Processor 3ghz
20gigs of ram
Win7 64bit
200gigs of storageSorry I forgot to mention that it's the Creative Cloud version.
-
Why do my loops slow down after many iterations
My Vi seems to freeze up or slow down after several iterations of the loop. This is an Analog Input Capture VI.
Attachments:
Final_Main_VI_with_working_amp.vi 456 KBFirst of all, thank you for your contribution. You are right to say that I have no need in changing the AI Config every time that the loop runs. But as this is supposed to be a soft-scope, I need to be able to update the parameters associated with AI Start while the loop is running (e.g. trigger level).
I have tried to move the AI Config subVI out of both loops but the error as a result is: "No transfer in progress for the specified source."
I also need a sampling rate of exactly 96kHz. I realize that the laptop clock cannot attain this value. Do you know how I could get exactly 96kHz.
Attachments:
Final_Main_VI_with_working_amp.vi 498 KB -
AME CS4 Batch - Slow Down After First File
I've been using AME to batch timelines from various different Premiere Pro projects. Problem is the first one in the batch will take the normal amount of time around 2 hours. Then everyone in the batch after that takes 5 hours.
If I stop the encode once it gets to the second file and slows. And then restart the program and put that one as first it renders in a fraction of the time....
Why does AME drastically slow down after the first file in the queue?Where do you close the ResultSet?
Where do you close the Statement?
Presumably you only create one connection for all users or you close it somewhere. -
Why does my data logging program slow down after a while?
A data logging program created with Labview 5.1. Slows down after a few weeks and creates files in the Temp. directory.Computer is Siemens Scenic pro 124 MB ram and AT-MIO-16XE50 Data acquisition board. Also using Solartron Dig. probes and Fieldpoint units.
Any chance that you are using Win 95/88/ME? Those OS's have well documented
memory leaks which will consume all your available memory if an application
is run long enough. Also there are some issues of memory management within
LabView in the allocation of memory.
The solution to the first is to switch to WinNT/2K. The second will be much
more difficult.
On Thu, 22 Feb 2001 03:19:12 -0800 (PST), Freek wrote:
>A data logging program created with Labview 5.1. Slows down after a
>few weeks and creates files in the Temp. directory.Computer is Siemens
>Scenic pro 124 MB ram and AT-MIO-16XE50 Data acquisition board. Also
>using Solartron Dig. probes and Fieldpoint units.
===========================================================================
SolidW
orks Research Partner National Instruments Alliance Member
Christopher Dubea Phone: (504) 847-2280
Vice President of Engineering Fax: (504) 847-2282
Moving Parts L.L.C. email: [email protected]
P. O. Box 6117 URL: http://www.movingpart.com
Slidell, LA 70469-6117
Maybe you are looking for
-
ITunes keeps changing id3 tags automatically
Seems to happen after being in the store. consistently changes certain information. Windows 8.1. Ive removed media player and media center so that is not the issue.....
-
$300 /month for 4 conecutive months in BEx Query Designer
Hello. Iu2019ve a business requirement to monitor customer spending habit. The report should display all customers who have spent more then $300 per month for 4 months consecutively. Please help Thanks in advance
-
2LIS_02_ITM not feting correct records.
For the datasource 2LIS_02_ITM , In RSA7 , Delta queue .- Its showing one entry for 2LIS_02_ITM with total - 73 , Is total shows the no. of records in Delta queue ? When i run the infopackage then in PSA it showing only 32 records get updated. I thin
-
I was working on a project recently (music video) where I had about 75 clips to cut up and edit, but my HD was too full to import all of the clips. The clips still added to an event and I was still able to drag them into the project and cut them up l
-
Vi analyser doesn't recognise the FPGa target
When analysing a VI, The VI analyser report some error about nodes in the VI and report broken arrow in FPGA VI. So Does it any way to make VI analyser to recognise FPGA target? B. Benoit Séguin Software Designer