Macbook with Snow Leopard compatible with After Affects CS3 or CS4???

I have a white Macbook(2006)2GHz Intel Core Duo with 2GB of ram, my graphic card is a Intel GMA 950, and I have Snow Leopard 10.6.4. After Effects CS5 will not run on my computer because it says it will run only on a 64 bit system.
So my question is with the description of my laptop above will After Effects CS3 or CS4 work on my macbook?
Thanks!

Best to ask this question in the Adobe forums.
Good luck.
x

Similar Messages

MacBook Pro (snow leopard) 2006 will not restart. Getting blank screen with folder (?)

MacBook Pro (snow leopard) 2006 has begun to turn off attached Cinema Display over the last two days. Comes back on on restart. This morning, the MacBook screen also went blank white on restart. Tried to use Snow Leopard CD to restart but it was ejected and folder with ? is only thing that displays. Will not restart. Have replaced hard drive 6 months ago. Help! What's wrong? I need this computer for work.

hawpotr wrote:
1. replace my current internal HD and convert it to external HD for use as secondary boot drive,
No. That has no advantage for you.
leave the internal HD alone and purchase an external HD that I can clone and use as boot drive in case of emergency?
Yes. I use Carbon Copy Cloner to make a boot drive and as a backup (in addition to Time Machine). CCC allows one to make incremental changes as well as creating a copy of the recovery partition. This means that if run on a proper schedule, you data will; be well protected and the MBP can be in operation very quickly if the internal HDD should fail.
A clone should be a 2.5", 9 mm thick SATA HDD so that it will fit inside the MBP. It can be powered from the USB port thus not requiring an AC outlet. In my collection of HDDs, I favor HGST and Seagate products. I principally use OWC enclosures that allow for USB, Firewire and eSATA connections. These are expensive but one can use a more modest one as well of one can tolerate longer data transfer times.
Here is a link showing some available SATA HDDs that will complement your MBP:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
You can look for enclosures on the same web site.
Ciao.

After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". I cannot now access iTunes. How can I resolve

After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". So, now after the upgrade, I cannot access iTunes. How do I resolve this??
Thanks

zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

After updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?

after updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?

Download 9.1 and 9.2.3 updates and install them

Does Apple have a web download of Snow-Leopard compatible QuickTIme 7?

I installed Snow LEopard onto my MacBook Pro 15" on Friday at work. I left the Snow Leopard install disc there, and now at home I realize I did not install QuickTime 7 and I need this to be able to work proficiently in FCP.
I keep reading that you can download QuickTime 7 at Apple bit every time I try and install after download it says that it is not compatible with this OS.
Does Apple have a Snow Leopard compatible version of QuickTime 7 available as a download? Or am I screwed and have to wait until Tuesday to get to wotk and install from the disc? Why does it have to be so difficult?
Dan

There's also an installer on the "Utilities" or "additional components" installer on the Snow Leopard disc.
Steve

HT204382 mpeg video file won't open in quick time player on my macbook running snow leopard. Works fine in iMac running mountain lion. Any ideas

mpeg video file won't open in quick time player on my macbook running snow leopard.
works fine on iMac running mountain lion.
any ideas?

HI,
If iChat is Open and your think Accounts/Screen Names are logged in then go to the Window Menu
This should list the accounts that are logged in with various keystrokes ( Apple/CMD ( or ⌘) and a Number) shown next to them.
Using these should get the Buddy list "back".
It is possible to Hide the Buddy list and then Quit iChat.
iChat will then "remember" where the windows were eve if this was Hidden.
Can you confirm that after reinstalling or restoring from Time Machine with possibly an Earlier Version you have Downloaded the COMBO version of OS X 10.6.8 and "run the COMBO" (Installed it - again) to update iChat ?
It is possible the text chat Window is also Hidden on double clicking a Buddy.
The easiest way for this to happen is to use a second Display and drag some windows to the second Display.
iChat "remembers" where you last had Outgoing Chats so Audio and Video windows will be where you left them as will Text Chats.
Incoming Chat Invites are normally in set places unless there is a chat already open to that Buddy.
With Windowing issue like this is sometimes pays to delete com.apple.ichat.plist itself (on it's own) and restart iChat (this plist holds the window positions amongst other things)
8:49 PM Monday; February 27, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Snow Leopard compatible printers/scanners

Here's a great Apple support document that lists Snow Leopard compatible printers and scanners. Of course it's the drivers that need to be Snow Leopard compatible, not the printers themselves.
http://support.apple.com/kb/HT3669

Not having any luck here with the UFRII drivers on the Canon Australia website here to install the IRC4058i printer in my office (btw the download url is http://www.service.canon.com.au/drivers/files/ir/osxufr2v200.zip). After uninstalling the old version and installing the new one, I can only install Canon ipv6 UFRII and not Canon ip UFRII, which is what I need. Hopefully an update will be released soon!
see also: http://discussions.apple.com/thread.jspa?messageID=10247358
Message was edited by: CVdS

Is it possible to upgrade macbook to snow leopard

is know i cannot simply upgrade to lion...but how do i find snow leopard? i cann't seem to find a download on the apple site. i am currently running 10.5.8 of mac os x. no problems or anything, just want to be able to use icloud as with all my other devices...

If you need to purchase Snow Leopard you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
Note that iCloud requires 10.7.4 or later.
Snow Leopard General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.

Hi, i forgot my macbook pro(snow leopard) password and i tried to reset it through single user mode, but whenever i type, everything comes out in CAPs instead of lower case. Each time i press the minus(-), it always comes out as an underscore(_).Pls help.

Hi, i forgot my macbook pro(snow leopard) password and i tried to reset it through single user mode, but whenever i type, everything comes out in CAPs instead of lower case. Each time i press the minus(-), it always comes out as an underscore(_).Pls help.

Well, you can try easing the shift key up with something thin but flexible (credit card sort of thing) but if the contacts below are stuck you may need to get it seen to by an authorised repairer.
If you can borrow a keyboard (a PC one will probably work as long as the password is alpha-numeric with no special characters) you can at least get in to backup your HD before going for repair.

I have a macbook white (Snow leopard), just started using mac, Is there anyway we can use the Iphone Apps( downloaded from ITune) on Mac

I have a macbook white (Snow leopard), just started using mac, Is there anyway we can use the Iphone Apps( downloaded from ITune) on Mac, they are getting saved in Mobile applications and have ipa extension

The operating systems for iOS devices and for Macs are completely different. Applications written for iOS won't run on a Mac no matter what fiddles you try with it. You can sometime extract data by opening the package, but it still won't do you any good. Look in the Mac App Store in your Applications folder to see if there are Mac versions or similar programs (iTunes login required).

Error installing Windows 7 on Macbook running snow leopard

I've been trying to install Windows 7 on Macbook running snow leopard. During the windows install, it goes through expanding the files and then fails with errors saying the installation files are corrupted. I've gone back to boot camp assistant, and removed the partition, and then re-partitioned and still see the same issue. Has anyone seen this problem?

Read the Boot Camp Instructions located here: http://www.apple.com/support/bootcamp/. You must use the same drive that contains OSX to install Windows using Boot Camp Assistant.
The Boot Camp community is located here: https://discussions.apple.com/community/windows_software/boot_camp
I've asked the moderators to move your post.

Upgraded macbook to snow leopard & ipod does not connect

I recently upgraded my macbook to snow leopard, now my ipod touch will not come up in itunes or on the desktop. I have tried the troubleshooting suggestions, but nothing has worked.
How do I fix this?

It would be very helpful if you told use what troubleshooting you have tried. Have you tried:
http://support.apple.com/kb/TS3540
(Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart)

PowerPC G5 crashing with After Effects CS3

I have been having "catastrophic" crashes, that is a crash in Mac OSX where the screen goes dark and I have to hold the power key to reset the system when using After Effects CS3 on my PowerPC G5. Also if I am listening to music in iTunes it just goes into a looping drone, (not a nice sound I can tell you).
I was wondering if anyone else has had similar problems. I have been simply editing text in an AE comp and bang the system hangs. This only seems to happen when I am using After Effects. I have Gridiron Nucleo installed but I don't have it switched on, since it hasn't been playing too well. I also have a Blackmagic card and an internal raid system.
I am running the latest version of Tiger on the G5 and have all software up to date. I might have to upgrade to Leopard as I just don't trust it anymore. This has happened enough times for me to now be totally on edge when I am using the system with After Effects CS3. I have a Mac Pro and this just works beautifully when running AE CS3
Any thoughts would be welcome
all the best
richard

Actually it has happened before and I don't think I was editing text. So I am not entirely sure that was the culprit. Put it this way I can run Photoshop, Illustrator, Cinema 4D, even After Effects 7 without these problems. However I have started to steer clear of the machine and use the Intel Mac solely as I don't really have time for crashes if you know what I mean. Also it is slow in comparison which isn't surprising but it really seems like treacle compared to the quad core mac.

Macbook Pro Snow Leopard; WiFi keeps dropping, no IP Address

Macbook Pro Snow Leopard; WiFi keeps dropping. Issue is Macbook is not getting an IP address from the wireless routers DHCP Server. Tried all options in the forums. Reboot, changing security, PRAM reset .. nothing. Problem keeps happening. No issues on XP laptops and Nokia phones.
Even the iPhone, iPod and iPad seems to be fine. It is just the dang gam it Macbook pro and it is driving me crazy.
All fixes tried, changing wireless mode, security, PRAM ... only thing left is to rebuild the mac which i was hoping I can avoid somehow.
Any ideas to fix this would be great!
RK

Change your router channel. Sometimes this all you will have to do.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
How to diagnose and resolve Wi-Fi slow-downs

Printer says "sending data..." and doesn't print (photosmart c440 & macbook pro snow leopard)

Hi, my photosmart C440 printer suddenly stopped working and wont print. The message says "Sending data..." forever but never prints. The printer is on but doesn't respond to what my computer says. I have a macbook pro snow leopard OS. This has never happened before, I didn't make any changes to the system. When the problem first appeared, I reinstalled the driver and was able to print once, then it stopped working. Then I installed snow leopard and it stil doesn't work.
Thank you!
This question was solved.
View Solution.

Let's reset the printing system:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Macbook with Snow Leopard compatible with After Affects CS3 or CS4???

Similar Messages

Maybe you are looking for