Macbook won't boot after time machine backup

I installed a program on my Mac that was causing some problems so I decided to do a time machine restore. I booted into recovery mode, selected restore from time machine backup and let it run. It finished completely but it gets stuck at the startup screen. I get halfway on the loading bar and it does not progress past there. I've waited up to an hour.
I am running Yosemite on a mid 2009 macbook. I am using a SSD and I know with trim enabled it sometimes won't boot up but I disabled it via terminal.
I've also ran disk utility on my HD and on my external HD. I'm getting no errors on both.
Anyone have any ideas?

If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Similar Messages

Macbook won't boot after ime Machine restore

I powered my laptop on last night and it would not boot. It just sits at the Apple log and spinning disc. I tried the usual recovery options fsck, disk utility, verify disk, etc. They all failed with different errors.
I tried restoring my Mac by booting with the Install DVD and pressing C. When it came up I tried restoring from Time Machine backup (not sure the exact name) It allowed me to select my Time Machine backup drive and proceeded to restore. It said the restore was successful and I needed to reboot.
After reboot it does the same thing. It won't boot.
Additional information: I have also tried a fresh install and it works fine, but then it won't see my Time Machine data to restore from. I figure this eliminates the hard drive as a suspect, and points to Time Machine being hosed up.
The laptop had not been restarted for about two weeks and I know there has been at least one Update since that time. Is it possible that the update broke it and as soon as I restarted it loaded the new broken files? And is it possible that my Time Machine restore is just restoring these broken files?

Yes, thanks this is all helpful information.
I tried restoring to older restore points and the TM restores work fine and the Mac boots up ok. I had to restore three more times to find the most recent backup that would still boot up ok.
Lesson learned here is to make a mental note of when updates are applied as well as when the laptop has been rebooted.
Now I still have two problems.
1. The backup drive only has 11GB free space so I can't really archive the old backup in case something was missed. Any unless I am missing something I can't search the TM backup for ALL files modified after a certain date and then copy them over. This means that I have to browse folder by folder looking for new files and copy them over BEFORE wiping out the old backup and starting a new backup again.
2. TM over WiFi is VERY slow and it will take 3-4 days to get the new backup completed. This makes me nervous knowing I have to delete my existing good backup to make room for the new backup to begin. What if TM fails or some other bad luck happens before the backup is complete.
I guess my big question here is whether there is an easy way of backing up TM connected via USB then move the drive to my APE and continue using WiFi. Last time I looked into this you had to make a copy of the sparse file and modify it. Once again this does not work because there is not enough space for TWO full backups of a 300GB drive with about 200GB of data. I have over 1TB of drives being used for backups of other computers so it's not like I am being cheap and just don't have the space. I have a 500GB for my desktop backup, a 320 for my laptop backup and a 120 for my other laptop backup. guess I could just go throw more money at it and get two 1TB drives so one could be the local backup of all these computers and have the other at an off site location using CrashPlan to also backup all the drives.

White screen & won't boot after Time Machine restore 10.8.2

Hello,
I know someone posted a similar issue but that it was related to a hardware failure. Mine was not a hardware failure.
Just wanted to give an FYI to anyone who may run into this issue. I recently restored my Macbook Pro from a Time Machine backup (10.8.2)
and I was getting a blank white screen at startup where the spinning line "|" would appear and then go away, and then come back, and then disappear... Over and over. Booting into single user mode resulted in the same issue.
I ended up re-installing Mountain Lion over itself and my machine booted sucessfully. Did all the software updates and I'm back at 10.8.2 again.
This is just an FYI, something for you to try if you get the same error, hope this helps someone.

Startup command-s and at the prompt type reboot
Then press return.

The disk won't eject after Time Machine backup

Each time im doing a time machine backup, the external drive does not eject, the icon becomes pale, but remains on the desktop. But when I did not just make a backup I can eject it normaly.
My disc contains two partitions, one with the backups. When my problem occurs the first partition is ejected but not the Time Machine one.
I tried to reformat the partition but the problem persists.
My hard drive is a GDrive mobile usb 1 TO purchased at the apple store.
Did someone has a solution?
Thank you !
PS; sorry for my bad english

Actually i found a potential solution, in majority of time it solved my problem, but some times (less frequently then before) it doesn't work And the disk still not eject. In the timemachine Settings, did the principal switch button is on "yes" or "no" ?
I was backing up manually, and I had put the switch to NO, and i think that was what cause the problem... When I Switched to YES, my disk ejected correctly for 95 % of time.
Try to turn this switch ON , if she is OFF.
I dont think that the problem is the age of the drive, mine is a 2014 one and i had this problem too.

Macbook failed to boot after time machine restore

I changed my macbook HDD, inserted the Snow Loepard DVD and do a time machine full restore.
After the Restore OK message my macbook reboot, have the black screen with the spinning thing, then a blue screen, then i see in a flash the Snow Leopard wallpaper and then back to the blue screen with the spinning thing and it stays there.
Dont really know what to do now.
Thanks
Cristian

Erase the drive and reinstall Snow Leopard, then restore the Home folder, third-party applications, etc. from your TM backup. For more help with TM I suggest reading the user tips: User Tips for Time Machine. You can also select Mac Help from the Finder's Help menu and search for "time machine" to get the online help.
Message was edited by: Kappy

IMac 27" won't boot (after Time Machine bug?)

Hi everyone,
Firstly, I don't know if my iMac is an Intel machine or not.
I recently had my failing hard drive (seagate, I think) replaced by Apple.
I had backed up using a hard drive using Time Machine.
I attempted to restore my back up to my now fixed iMac. It failed after about 3%. I ran 'verify' in disk utility and it told me the hard drive with the back up was fine.
I tried again to get my back up onto my iMac. It failed again. Again after about 3%
Now, this is when I think I made my big mistake - I asked my computer to boot from the Mac harddrive. Does this mean I told my computer to boot from something that was only 3% installed?
Anyway, it will not boot. Lots of text pops up on the screen, it goes round and round in circles for a while. Then an icon resembling a no entry road sign pops up and it gives up.
I have tried holding down command and r both with the Mac OS X Install DVD in the optical drive and not in.
I have tried holding down 'c' with the Mac OS X Install DVD in the optical drive.
No luck.
Can anyone help please? Please tell me how I can provide further information. Take a video of what happens, perhaps?
Thank you.

Please make a Genius Appointment and take it in for service.

Just bought a Macbook Pro. I want a clean install so won't use a Time Machine backup but how can I install the software I bought from Apple Store? can I just delete it from the old machine that is going to someone else?

Just bought a Macbook Pro. I want a clean install so won't use a Time Machine backup but how can I install the software I bought from Apple Store? can I just delete it from the old machine that is going to someone else?

The ne
The new machine has Mavericks which is fine. And I will leave it as is. I don’t want anything from my old machine other than 2 apps that I will need on the new one. I want to be able to install those apps that I bought from the App Store onto my new computer. I assume Apple doesn’t want me to have the apps installed on 2 machines at the same time so I wonder if just uninstalling them from my old machine will release them for re-install on the new one.

I am out of space on my Macbook Air and have a Time Machine Backup. I want to complete reset my mac, but wonder if I can pick and choose what I restore to my computer? Can I also use my time machine backup and external storage as well?

I am out of space on my Macbook Air and have a Time Machine Backup. I want to complete reset my mac, but wonder if I can pick and choose what I restore to my computer? Can I also use my time machine backup as external storage as well for the files I don't need everyday?

If you are using "Restore from Time Machine Backup" option from OS X Recovery, you can only choose from the broad categories presented.
... Can I also use my time machine backup as external storage as well for the files I don't need everyday?
To be clear, if you are asking if you can use the volume containing your Time Machine backup to store additional, non-Time Machine files, the short answer is yes.
It's not a good idea though, since the Time Machine backup will eventually fill all available space, after which it begins to remove old, "expired" backups to make room for newer ones. The presence of additional files doesn't change that fact, and Time Machine will not erase them, but you will encounter a dilemma should you want to store additional files on that volume when there is no remaining space. You will have to make room for them on your own, by deleting existing files. Furthermore, since Time Machine cannot back up its own volume, those additional files will not be backed up by Time Machine.
The easy solution for what you describe is to purchase additional external storage. External USB hard disk drives have become very inexpensive; about $55 will buy a perfectly suitable 1 TB drive.
You can also choose to replace your MacBook Air's internal storage with a larger capacity one. Look for a suitable replacement from OWC / MacSales:
http://eshop.macsales.com/shop/SSD/OWC/Air-Retina
That gets a little more expensive but it is the optimum solution.

No internet after time machine backup

I sit here on a new computer under a different user name from my old backup. I can't get internet on my old user name. I realized my internet was working fine when I logged into my old computer at the same time to see if it was an internet issue or a computer issue. I'd hate to have to transfer all of my old info from my old user name if there is an easy fix for this that I'm not seeing.
I've rebooted the modem several times, I've run disk utility, and run all of the maintenance scripts for ONYX. I haven't deleted any preferences and I guess that should be my next step.
What's odd is that my old user name gets literally 1kbps internet, the new user name gets 1.5mbps, the usual for my internet. I've turned off the old computer to see if maybe there was a conflict with that as well, but the issue still happens.

it's all the same as far as I can tell. No sharing, and I only use airport and one network.
I went ahead and deleted a bunch of the preferences in the users>library>prefs. It reset all of the network options, but the lag still exists.
One thing I forgot to mention was that on my first attempt at the time machine backup, it got hung up at the very end when it said "transferring network preferences". This makes me think the time machine backup has some corrupted file in the network prefs. I wish when I had made my second and successful attempt at the backup was that I unchecked the network prefs to be tranferred.
I opened up terminal to see if there's some extraneous process running, and there's a lot of stuff running and I can't really decifer if the root processes are supposed to be running or not.
Anyway, I'm giving up and just starting over on a new account. I've searched around the web, and this seems to not be an uncommon problem (no internet after time machine backup), and there's no apparent solution either.
At least I don't have to reinstall the programs, just move a bunch of stuff. It's a pretty odd bug and I hope Apple picks up on this one to fix.

My 2008 MacBook Pro Stop Recognizing my Time Machine Backup Disk "HELP"

My 2008 MacBook Pro Stop Recognizing my Time Machine Backup Disk & without it my MBP Run's Slow like a "I Hate to say it Windows OS" Is my USB Drives? (2.0) Or is it Time to UPGRAIDE to a Unibody MBP? Please Help ASAP

Take it to an Apple store or AASP.

Imac won't restore from time machine backup after HD (hard drive) recall replacement

I have an imac bought in 2011, running Snow Leopard. It required an HD replacement due to the 1 TB Seagate recall - the replacement was done by a certified Apple repair station yesterday. Before the guy left he started a backup/restore from my latest time machine backup set. It failed. I attempted it two times and got error messages that it failed and the computer needed to be restarted to try it again. No luck. I called the guy back and he told me to call Apple Care. Not thrilled about that response since the guy had just left my house I did what he told me to do. (A quick sideline here: I recognize that a time machine backup should be no big deal and SHOULD work everytime, but it doesn't. It irks me that Apple is replacing my HD through no fault of mine and yet they don't allow the restore of data to be a "covered" expense in this process - this isn't just because this was an authorized repair guy - the Apple store would have done the same).
Back to the issue. When I called apple care they pretty much had me try the same thing again with an earlier back up set. To my knowledge, it didn't work. I say this because it looked like it was working and when I came back to the imac later, it had restarted and once again booted to the OSX install. (The boot disc is still in the imac). When I tried to boot from another location, one did not show up to boot from so I assumed that the data didn't transfer and it forced another restart. So, I tried something else. I tried to re-install the snow leopard OSX without using the restore function. That appeared to work and then when the machine restarted it asked if I had another mac and I chose the option to get the files/apps/etc. from my time machine backup. The computer chose what I can only assume is the most recent backup set (It chose what I know to be a subfolder that appears under the dated backup folder - Macintosh HD--which btw is confusing seeing as that's always the name of the HD on the imac). I again stepped away from the computer so it could do its thing for two hours. When I returned, I was back to the MAC OSX screen that asks you to choose a language. There were no more options to choose DISK UTILITY or RESTORE FROM BACKUP, etc. When I clicked on English it took me right back into the screen where you say whether you have another Apple that you want to transfer data from. I realized that the imac must have restarted and I assumed maybe it was because the boot disk was still in - except how do you get the disc to eject? I also initially assumed that the backup had somehow failed again and triggered a restart. I tried to choose the option to just set up the machine without transferring data and when I got to the choose a name for your HOME folder message I tried to enter the same name I had it as before and it wouldn't allow me to do so, saying that that name was already in use. I also tried a different name and that didn't work either - got the same message (I assume if it is not the same name that it won't sync up with the time machine data from the backup set). So, I almost tried the "select time machine backup" option again until I looked at my HD space. Clearly, there is space that has been used. HD space was 997 at the start and now it's 636. My initial thought is to somehow get back into the setup area where I can use disc utility and erase the whole thing and then start over but 1) I don't think it's going to work even if I could get back there 2) I have no idea how to get this thing to reboot into that mode 3) I can't get the boot CD out to even try to restart to see if this thing did what it was supposed to, SO NOW I AM TOTALLY STUCK! I have not called Apple Care back because quite frankly they were useless the first time. I have a call into the repair guy but who knows how much help he will be. In the mean time, I have a million things to do and a computer that isn't working - Whoever said Apples never have issues needs to be seriously censored!
A few other notes: I use Time Machine Editor to run my backups weekly. It was set up that way from the get go by an Apple rep who came to my house to get us up and running. Editor should not effect the way that time machine does its work, so I doubt there is relevance but thought it worth mentioning.
One other note is that the Apple Care agent tried to have me do something called a "Source" something or other from the disk utility screen but when she realized that my backup file (shown by date) contained many other sub files (11-27-12/MacintoshHD/MyNamesIMAC/etc.), it was not possible to run this operation - thus we aborted. Sorry I don't remember the name of the process and unfortunately now can't access that option to go find it.
If you can help me, I would be eternally grateful! I am open to having a phone conversation if you are willing to give me your email to mail you my number. I have so much work to do this week and this was the last thing I needed. Did I mention this was supposed to be EASY?
I used to be quite the geek with my PC - still on the learning curve with the mac but not enjoying it. I am fairly tech savvy and I can follow instructions for a step by step solution if you've got one.

I got a recall and had the drive replaced. I have retored 3 timesa dn even had apple do the job and it is still not right. I still can't get a simple ghost of the data from time machineback tot he new drive.
This is Apple's explaination as taken from their web page.:
Restoring your entire system from a backup
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Recovery system (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility.
Note: If "You can't restore this backup because it was created by a different model of Mac" appears when restoring a backup that was made on a different Mac, follow the onscreen instructions.
I even posted this information on the community and apple removed it... because they don't like the:
Off-topic or non-technical posts
Non-constructive rants or complaints
But here is my experieince:
Take in 27iMac running 10.6.8, 5-7 days, what a joke, my boss will be happy to pay for a week without working. Finally get, "if you have TM back up, 3 days." Get machine back with 10.6.3, hit the R recovery, click TM back up, runs for 2 hours, reboots, looks great. Box up take back to office... update to install - OH NO, still running 10.6.3. Updates crash with no specific error on install, BUG PROBELM, nothing runs.
Call Apple... after hours, tells me to boot using 10.6.2 disk, wipe, reinstall OS, udate to 10.6.8, THEN do the restore. GREAT! Only thing 10.6.2 DVD won't read... now back on phone... take back to the store, Genius says, he'll ix it just like it was. PROMISES it'll be fixed.
Pick up next day, supposedly, booted to disk, wiped drive, reinstalled, updated to 10.6.8 and THEN did the RIGHT restore... Looks GREAT... apps run and 10.6.8 OS. Back to the office... NOT RUNNING right!!!... fonts messed up, drop box app needs new install, cocktail needs upgrade, Fetch not working, memorized paths gone... back ups locked out of permissions... ***!!
4 hours on phone with apple and still no rsolution - to missing "settings". Seems there are THREE WAYS TO RESTORE (according to apply tech)... Running MIGRATE ASSISTANT and being able to choose your files, including settings, "R" RESTORE after they load a new OS... or NOW WAITING for them to send me a bootable 10.6.3 disk and then boot from disk, w/o installing OS and doing a restore from TM. I think this is done via the disk Utilties application.
So now can't back up without doing a full 400 GB back up since permissons are screwed and possibly destroying any good back ups... can't work, like having hands tied behind back. WAITING for solution! Very upset!!!
I did my first restore just like they said and now an 10 days without proper machine. Just FYI. I thnk I am going to make the store do the tech work so I have somthing to fall back on.

MacBook Pro won't book after Time Machine restore

I have a late 2010 MacBook Pro that had 4 bad blocks on the hard drive. I reformatted and zeroed out the drive and then restored from a Time Machine backup which was Mac OS 10.6.6. Now the MBP won't boot. I get the Apple logo and the spinning gear, and that's it. I gave it as long as 20 minutes but no boot. Starting from the DVD shows I have that system on the drive in Startup Disk. I've run myriad utilities including Disk Utility and Disk Warrior and everything is fine.
Before I reinstall 10.6, I thought I'd poke my head in here and tap the collective wisdom.

Your situation sounds a bit similar to mine except you had the gray screen before you did anything, which to me means you had a problem that already surfaced, where I did not. I don't know if the Windoze partition has anything to do with it, but if you are running SN 10.6 you can try the same solution I did. Boot from the SN DVD and install a new version of SN over you old. Don't worry, all your files will be there. The installer is intelligent enough to realize you already have SN and will do the install over your old system files only. This is the 'new' Archive and Install scenario that existed on previous versions of Mac OS X install DVDs.
You will then have to run updates to get the system back to whatever version you were running previously.
This is what I did and it worked fine, altho it was more time consuming than I wanted.
J D Thomas
ThomaStudios

Macbook pro won't restart after time machine install on new hard drive

I installed a new 500 GB HD on my 13-inch mid 2010 Macbook Pro (since the original crashed). I successfully connected to the Disk Utility via the internet connection and started recovery from a recent Time Machine backup....but, the computer will not restart. It's been stuck in the grey screen with the Apple logo and rotating status bar all night. I shut it down and restarted, but it won't go past the grey screen state. I can't find any answers on the Support Page. Help. Any one else have this issue? Should I have first installed the Lion OS X first and then restored from the Time Machine backup?
Also, wondering if all my programs (2011 ILife & IWork and Microsoft Office) will be reinstalled with the back up? (I can't find my installation disks for ILife and IWork :-()

Time machine is easy to set up and theoreticaly recover from. There have been reports of problems when a different disk or computer is used.
https://discussions.apple.com/search.jspa?peopleEnabled=true&userID=&containerTy pe=&container=&spotlight=true&q=time+machine
For future reference you may wish to learn about and use cloning of the HDD. I use both CCC and SD to do this and consider it to be the most reliable way to back up and recover.
Carbon Copy Cloner - Home
www.bombich.com/
SuperDuper!
www.shirt-pocket.com/SuperDuper/
added a good reference
http://Pondini.org/TM/Home.html

2 user folders after time machine backup. Macbook Pro 13", Mac OS X 10.6.8

After a time machine backup my macbook pro runs fine, however the backup has created a 2nd user file. my new user file is now named like my old one, just with " 1" added. I have 2 user folders, can I delete the old one?
After a random check of the content in both user folders I found out that it's not identical. Some files that weren't backed up with the time machine before the re-setup are in the original folder, while the new uder folder obviously only backup what it could find on the time machine disc. (Time machine backed up my whole hdd about 2 days before the crash & re-setup)
Due to this situation my local HDD is almost full now. The original user folder has 205 GB, the new one user 1 has 210 GB, plus applications with a 500GB HDD, I now have only 44GB left.
Can I delete the old user folder?
Can I then re-name the new one (user 1) back to "user"?
Thanks
J.

I've never heard of a 'problem' as you're having - and I searched Pondoni's Time Machine Troubleshooting FAQs and couldn't fine anythig similar.
I would be wary of deleting anything manually from your TM backup - the sparsebundles are rather sensitive. If you like, however, you could always erase your TM backups and start anew... that's the only way I would know to 'fix' the problem.
Good luck,
Clinton

Finder not responding after time machine backup

I just updated my MacBook (mid 2011) to OS X 10.10.2, and now I'm having issues with my time machine backups. I have been having problems with Finder ever since upgrading to Yosemite (Finder freezing and requiring relaunch, or even rebooting the whole machine), but this is new - after a backup is complete, Time Machine can no longer find the backup disk (my OS X server), and so it never completes a second backup. Has anyone else had this problem? And has anyone found an answer to the Finder problem in general?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1217 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1000 80 40 500 300 85 25 20480 262144 20 2000 524288 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays CFBundleIdentifier 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' 'com\\.apple\\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n'"${k[22]}"'%s\n' {Privacy,Mode}': %s\n' '\n   ...and %s more line(s)\n' 'RSSI: %s\nNoise: %s\nTx rate: %s\n' '\nContents of %s\n   '"${k[22]}"'mod date: %s\n   '"${k[22]}"'checksum: %s\n%s\n' '%d MB: %s\n' );b=(com.adobe.{AAM.Updater-1.0{,},AdobeCreativeCloud,CS{4,5}ServiceManager,fpsaud,SwitchBoard{,}} ${k[21]}{aelwriter,{AirPortBaseSt,SafariNotific}ationAgent,FolderActions.enabled,installer.osmessagetracing,mrt.uiagent,ReportCrash.Self,{rp,usb}muxd} com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.daemon{,} com.microsoft.office.licensing.helper com.oracle.java.{Helper-Tool,JavaUpdateHelper{,}} com.teamviewer.{Helper,teamviewer{,_desktop,_service}} org.macosforge.xquartz.{privileged_{,},}startx );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS=":";if(system("sw_vers -productVersion|grep -q ^10\.1")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' { sub(/ :/,"");print|"tail -n'${p[10]}'";} ' ' NR==2&&$4<='${p[7]}' { print $4;} ' ' ($1~"wir"&&$2>'${p[22]}')||($1~"uts"&&$2>'${p[19]}') { print $1" "int($2);} ' '|grep DYLD' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q":"$0":"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/ /{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { if(NR<'{${p[14]},${p[21]}}') printf("^/[Sp]|'${k[21]}'");} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print;} END { split("'"${b[*]}"'",b);split("'"${c[*]}"'",c);for(i in b) print b[i]".plist\t"c[i];} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' $2=="=" { gsub(/[()"]/,"",$3);print $3;} ' ' /^\// { sub("/dev/","",$1);printf("%s: %s\n",$1,$9);} ' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1=="op" {m=$3};$1~"lN" {N=$2};$1~"lR" {S=$2};$1~"Tx" {T=$2};$1~/^st/ {s=$2};$1~"li"&&$3!~"wpa2" {printf("'"${f[5]}"'",toupper($3))};END { if(S*N*T&&(S-N<'${p[5]}'||T<'${p[20]}')) printf("'"${f[8]}"'",S,N,T);if(s~/^r/&&m!~/^st/) printf("'"${f[6]}"'",m);} ' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS=":";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n   "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n   "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n   "$5" => "$3" UID ("$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n   "$3" (UID "$4", error "$5"): "$2;} END { u1="Mb/s";u2="per sec";u3="ms/s";u4="KiB/s";u5="%";u6="total";u7="MB";u8="ports";u[1]=u1;u[2]=u1;u[3]=u3;u[4]=u4;u[5]=u5;u[6]=u6;u[7]=u7;u[8]=u8;u[9]=u2;u[10]=u2;u[11]=u2;u[12]=u2;l[1]="Net in";l[2]="Net out";l[3]="I/O wait time";l[4]="I/O requests";l[5]="CPU usage";l[6]="Open files";l[7]="Memory";l[8]="Mach ports";l[9]="File opens";l[10]="Forks";l[11]="Failed forks";l[12]="System errors";for(i in o) print "\n"l[i]" ("u[i]")\n"o[i];} ' ' END{if($3~/[0-9]/)print$3} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[18]}"' "F|getline g) { l++;if(l<=L) f=f"\n   "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n   '"${k[22]}"'"T;printf("'"${f[9]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[18]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[19]}"'\\ :'"${k[16]}"' \""$0"\"/*/'${k[20]}'";p|getline b;close(p);if(b~/ /||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[20]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/:/;s/(\n)c/\1:/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;p;' ' s/^.+ |\(.+$$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/:(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}':/;s/ *: */:/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS=":"} { printf("'"${f[10]}"'",$1/1048576,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[17]}}'/ { getline d;if(d~"t") D=D"\n"$1;} END { print D;} ' ' NR>1&&$3!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $3":"$2;} ' '|tail -n'${p[6]} ' $1>1 { $NF=$NF" x"$1;} /\*/ { if(!f) f="\n\t* Code injection";} { $1="";} 1;END { print f;} ' ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;1s/:/ tree/;/^ +[MPSV].+:../d;s/:$//;p;' 's/,.+"//p' '|grep -q e:/' '/[^ .]/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[18]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' env pluginkit scutil 'dtrace -q -x aggsortrev -n' profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls route egrep 'dscl . -read' );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[20]} '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|calling|(complet|enabl)ed|ry HD' -k Message CReq 'bad |corru|dead|fail|GPU |hfs: Ru|inval|v_c|NVDA\(|pagin|error|TCON|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0 < 0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno != 0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1:%@d:%s:%d\n\",@a);printa(\"2:%@d:%s:%d\n\",@b);printa(\"9:%@d:%s:%d:%s:%d\n\",@c);printa(\"10:%@d:%s:%d:%d\n\",@d);printa(\"11:%@d:%s:%d:%d\n\",@e);printa(\"12:%@d:%s:%d:%d\n\",@f);printa(\"3:%@d:%s:%d\n\",@g);printa(\"4:%@d:%s:%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag $ -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{aut*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/{Lau,Sec}*/*t .launchd.conf" list '-F "" -k Sender hidd -k Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' -I --dns -get{dnsservers,info} -P -m\ / '' -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:'}'"' -name\ kMDItem${k[16]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[16]} :CFBundleDisplayName $EUID {,'/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s $TMPDIR../C -type f -size +'${p[11]}'M -exec stat -f'%z:%N' {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' "-o ',\"name\":\"[^\"]+' L*/A*/Fi*/P*/*/a*.json" users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$Sender \$(RefProc): \$Message" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "sandbox ex" ' );N1=${#c2[@]};for j in {0..15};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console}\ log Activity SMC Login\ hook 'I/O per process' 'High file counts' UID Daemons Agents XPC\ cache Startup\ items {Admin,Root}\ access Bundles {,Inserted\ }dylibs Stylesheet Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ {caches/logs,overrides} Shutdown\ codes Heat Diagnostic\ reports Bad\ plists Free\ space VM );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D${i}0'(){ A'$i' $@;C0;};';for j in 2 3;do eval D$i$j'(){ local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D10 0 N1+1 2;D10 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D12 22 15 63;D10 0 N1+2 3;D10 0 N1+15 17;D13 3 0 N1+3 4;D13 4 0 N1+4 5;D13 N3+4 0 N1+9 59;for i in 0 1 2;do D13 N3+i 0 N1+5+i 6;done;D13 N3+3 0 N1+8 71;D13 62 1 10 7;D13 10 1 11 8;B2&&D13 18 19 53 67;D12 11 2 12 9;D12 12 3 13 10;D12 13 42 70 101 25;D12 65 6 36 13;D12 45 20 52 66;D13 66 7 37 14;D13 17 8 15 38;D10 9 16 16 77 45;C4;B2&&D10 35 49 61 75 76 78 45;B2&&{ D10 28 17 45;C4;};D10 12 40 54 16 79 45;D10 12 39 54 16 80 45;D13 31 25 37 15;B2&&D13 19 21 0;B2&&D13 40 10 42;B2&&D12 2 29 35 46;D12 44 34 43 53;D12 25 22 20 32;D12 33 0 N1+14 51;D12 34 21 28 35;D13 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D13 50 38 5 68;B4 19 0;D23 37 33 34 42;B2&&D13 46 35 45 55;D13 38 32 31 43;B2&&D13 59 4 65 76 91;D13 63 4 19 44 75 95 96;B1&&{ D13 53 5 55 75 69&&D13 51 6 58 31;D13 56 5 56 97 75 98&&D10 0 N1+7 99;D12 55 5 27 84;D13 61 5 54 75 70;D13 14 5 14 12;D13 15 5 72 12;C4;};D13 16 5 73 12;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 20;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 6 6 73 102;B2&&{ A1 18 26 94;B7 6;B4 0 0 11;C3 23;};A1 18 26 94;B7 6;B4 0 0 11;C3 24;D13 60 14 66 92;D13 58 14 67 93;D13 26 4 21 24;D13 42 14 1 62;D13 43 37 2 90 48;D13 41 10 42;D12 48 36 47 25;A1 4 3 60&&{ B3 5;A2 14 61;B4 0 6 21;B4 5 0;A2 14 62;B4 0 0 21;B6 0 6 4;C3 5;};D13 9 41 69 100;D12 32 21 68 35;D12 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D13 54 5 7 75 76 69;D13 52 5 8 75 76 69;D13 57 4 64 76 91;D12 0 4 4 84;D12 1 4 51 84;D13 21 22 9 37;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D20 31 47;D13 64 4 71 41;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 29;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 16;A1 26 50 64;B7 16;C3 6;D13 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it. Then go to the next step.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Macbook won't boot after time machine backup

Similar Messages

Maybe you are looking for