MacBook won't click

I have have a 5 year old MacBook and the trackpad buttons stopped working. I thought I'd put on an external mouse' however, it also will not let me click on anything. The pointer moves but I can not select. I'm running Snow Leopard OS. Any tips?

Try removing the battery and running from the AC adapter......the battery might have begun to swell and put pressure on the track pad from the back side.....

Similar Messages

My macbook won't let me sync music or apps as it says my computer is not authorized, even though when I clicked to authorize it it says that it already is. how do i fix this?

my macbook won't let me sync music or apps as it says my computer is not authorized, even though when I clicked to authorize it it says that it already is. can anybody tell me how i could fix this? iv already tried unarthorising the computer and re authorising it but it still doesnt seem to work

Hey CarlyR_,
Thanks for the question. I understand you are experiencing issues related to iTunes Store authorization. The following resources may help to resolve these issues:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks,
Matt M.

Macbook won't turn on all the way. Please help.

Macbook won't turn on all the way. At first it only showed the grey apple logo, but now it says that I need to restart the computer by holding down the power button for several seconds or pressing the restart button. I tried this already but it's not doing anything. Please help.

1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Macbook won't get past the grey start up screen

I purchased my Macbook in 2008, roughly July.
My fiance unknowingly shut down my macbook in the middle of start up. Before that it was running perfectly fine, I had no issues.
After my fiance stopped the start up, the macbook won't turn on. It'll load up to the grey loading screen (example here)... It doesn't make much noise as it starts up either. I have all original discs that came with the macbook, if that helps any.
I'm frustrated, as I can't afford to replace my mac at this point.
Any idea what I can do?
Thanks..

Hopefully, nothing permanent. Do the following:
If you have Snow Leopard installed:
Reinstall Snow Leopard without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
If you have Lion installed:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
If you have Leopard installed:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

MacBook won't go past startup screen

My MacBook won't go past the startup screen.
This happened after I tried reseting my battery because it was not being recognized since it was drained completely. After removing the battery and re-inserting it was still not being recognized. So the support website advised to try downloading the latest update. However, before downloading the last item, it showed a message saying that there had been an error in the download, to go ahead and erase the current download and try again. However, when i clicked "ok" on the error box, it automatically went to re-start and I have not been able to go past the gray screen with the apple...the waiting circle just keeps going round and round.
I have tried to start it pressing the c key and the shift key but it did nothing. I then tried to start it with disk 1 and it does nothing either, plus the disk will not eject either.
Please help!!! what should I do???
Thank you so much for your time to help me with this.
MacBook 1,1 Mac OS X (10.4.9)

To eject the disk, hold the trackpad button down as the machine restarts.
Is your data backed up?

My macbook won't update anymore

Macbook won't update anything, from the mac applications to firefox .
Can someone help me ?

Make sure there's enough free space on the startup disk.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.
The startup disk may need repairing.
Using Disk Utility to Verify or Repair Disks

MacBook won't automatically sleep

My MacBook won't automatically sleep anymore. If I close the lid or command it to sleep, it will. But it will no longer automatically sleep. I've tried tons of fixes and searched for hours on the internet, but still have not found a solution. I seem to have noticed that this starting happening after I installed Windows XP via Bootcamp, so I'm guessing that the problem is related to that. Any ideas?

This is for a Mac that won't sleep.
Here is KB article HT1776 with their tips.
Mine follow;
USB devices and hubs often cause Macs to not sleep or wake quickly from sleep (notably HP printers and scanners, HP all in ones, and Cannon scanners). Disconnect all USB except for keyboard and mouse and try. If it sleeps, add one back at a time testing after each one to find the culprit.If you've set your Mac to receive faxes, it may not be able to sleep. It might also have a damaged preferences file.
If you use your Mac for faxing, open System Preferences. click Print & Fax, click the Faxing tab, and uncheck the Receive Faxes On This Computer box.
If that doesn't work or you've never faxed on your Mac, go to Finder/Hard Drive /Library/Preferences/SystemConfiguration and delete the com.apple.PowerManagement.plist and com..apple.AutoWake.plist files (if your Mac asks, type your admin. password).
If the latter file isn't present in the folder, go to user name(probably your name)/Library/Preferences, delete the com.apple.systemuiserver.plist file, and reboot your Mac.
Hope this helps!
P.S. One member here reported this (Michael Gleason);
"I have had this problem with my IMac G5. It is surprisingly irritating. LaCie's Silverkeeper backup software was the cause. By default it gave itself permission to wake up the computer to check if a backup was needed. Do you have this or a similar program installed which has scheduled activities including wake-up permissions as an option?"
Dave Hamilton provided this link, xlr8yourmac.com, to a member, which addresses failure of deep sleep with some users that updated and added new FireWire and USB card.
Also, here is Apple KB article TA2469 about PCI cards and sleep.
tomhorvat adds this; After few days of messing around I found out that I had desktop background (wallpaper) set to change every 1 minute.
After unchecking "Change picture..." in system preferences (under Desktop/Screen saver), my powerbook went to sleep all by itself.
Tristan Currier noticed this; "I have a Canon printer(shared) and my imac would not sleep. I opened up printer/fax in system prefs and noticed it said the printer was in use when it was off. Opened up the printer queue and noticed about 7 pending documents. Deleted them all and now it sleeps.
Check the printer queue!"
Allan Jones says "sometimes there is Network activity: launch System Preferences > Energy Saver > "Options" tab and uncheck "Wake for Ethernet network administrator access."
Good Luck!  DALE

Macbook won't restart while updating 10.6.0 - 10.6.8

Hello all,
I'm having trouble updating my Macbook Pro 13 inch from 2009.
Yesterday I turned my Macbook Pro on for the first time in 2 years and I want to bring some life in it.
It still had the version 10.5.8 which I updated with a usb to 10.6.
Now I want to update my OS X version from 10.6.0 to 10.6.8. I've downloaded the files by clicking on ''software update'' through ''about my mac''.
It now asks for a reboot, so it will install the updates. However, the macbook won't restart.
I click on restart and all it does is show very short a blue screen and then I see my background with only my mouse cursor which I can still move around. All of the applications and toolbars are gone and I can wait an hour and it will still be in the same position. So I have to force the shutdown by holding the power button... And when I turn it back on, it didn't install anything.
Can someone please help me out?
Kind regards!

Edit

MacBook won't boot up

My MacBook takes about 7 mins to start up and when it does all I see is my background and cursor and that's it, if it try click the cursor turns into the spinning rainbow and that's as far as she goes, help please, I started it up in recovery but my trackpad moves but won't click so I can't do anything, I've done a VRAM reset, I've taken out the battery and booted it up but still the issue with booting and mouse still moves but won't click, I actually don't know what to do anymore someone please help

If you do not have a current backup then your first priority should be to backup your data. Your drive may be failing, it could be your disk is almost full, or there are other causes.
I’ll assume you have not updated OS X or installed any 3rd-party software lately. If you have, there may be a different set of fixes than the trajectory listed below.
Start with an SMC Reset.
http://support.apple.com/kb/HT3964
Will it boot in Safe Mode?
http://support.apple.com/kb/HT1564
When in Safe Mode does it operate normally?
After booting in Safe Mode will it boot in normal mode?
If it will boot in Safe Mode then backup your data onto and external disk drive using Time Machine or some other method.
If you can get it to boot in either mode, how much disk space is used out of what capacity?
If it will not boot in Safe Mode, try repairing the disk.
See Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
When in Disk Utility you will see an entry for the S.M.A.R.T. status of your internal hard drive. If it does not say "Verified" then the hard drive is failing or has failed and needs to be replaced. If it is “Verified” then run and re-run Repair Disk until it reports it fixed no errors and it finished normally. If it continues to report errors proceed to the fsck section.
Boot normally and see if the system is healthy.
Reinstall OS X.
If the disk is healthy and your system is not, reinstall OS X.
http://support.apple.com/kb/PH10763
Hope to hear from you soon on your progress.

My Macbook won't allow me to delete files that's in my trash! ㅠㅠ

Info about my MaBook
OS X Yosemite (Version 10.10)
MacBook Pro (Retina, 13-inch, Mid 2014)
Processor 2.6 GHz Intel Core i5
Memory 8 GB 1600 MHz DDR3
So basically my Macbook won't let me delete things off my hard drive. I'm quite new to MacBook (I got it a week ago) and I've just realised that when you have a hard drive, when you delete things off it, you have to drag it to trash and then "secure empty trash it." Whenever I do that "The operation can’t be completed because you don’t have permission to access some of the items" pops up and I don't know what to do!
I haven't broken it right?
I don't know if this is useful but the hard drive I am using is "G-Technology G-DRIVE Mobile USB 3.0 1 TB External Drive - Special Edition," I got it from Apple... err here's the link - http://store.apple.com/uk/product/HF113ZM/A/g-technology-g-drive-mobile-usb-30-1 -tb-external-drive-special-edition?fnode…
I don't know if this is helpful either but I also re-formated the hard drive into ExFAT

You really don't need to do "secure Empty Trash." Just empty the Trash. If you don't have permission to access some items that means you shouldn't be trying to delete them or you are trying to delete a file you don't own.
If your external drive is used only on your Mac, then it should not be formatted ExFAT. It should be prepared as follows:
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Try restarting the computer. Then again try to Empty the Trash. Do you still get the error? What are you trying to delete?

If my macbook won't let me sign in on facetime what should i do?

if my macbook won't let me sign in on facetime or messages what should i do?

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
           ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
           ▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
           ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
          Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound outputand Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.apsd.plist
Right-click or control-click the highlighted line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 12
Reset the NVRAM.
Step 13
Reset the System Management Controller (SMC).
Step 14
Reinstall OS X.
Step 15
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support. When you set up a support call, select "Apple ID" as the product you need help with, not the hardware model. That way, if you're not under AppleCare, you may be able to talk your way out of being charged for the call.

MacBook won't start on battery/shuts down when power adapter is removed

Help & advice needed please.
My MacBook won't start without external power, it gives a whir then a click then nothing. Once started up, if I remove the external power it just shuts off.
The battery shows at 98% & charging. Coconut Battery shows the following:
Current battery charge 4126 (& increasing as I type)
Maximum battery charge 4200
Current battery capacity 4200
Original battery capacity 5200
80%
Battery loadcycles 111
Age of your Mac 6 months
Charger connected yes
Battery is charging yes
Does anyone have a clue why the Mac won't power itself on the battery when everything else seems like it works?
Cheers!

As of today, my MacBook and I have been together for 40 days. Yesterday, while I was happily surfing (on battery), it powered down with no warning. Okay, these things happen. I plugged it in, restarted, and all seemed to be fine. Battery was about 70%. I did other things on my other machines and when it was about 90%, unplugged it and everything was good. This morning after using it unplugged for 1.5 hours it did the same thing, but decided to only work with the power adapter, not on battery alone. When trying to boot without AC, it would try to spin the CD and then fall back into off. When on AC, if I pulled the adapter, it would last two seconds and go blank. I made an appt. with the Apple store (Fashion Show Mall, Las Vegas) for 3:20pm. I got there right at 3:20pm and the monitors showed I was 5th in line. Store was fairly packed, at least one patron at every display item. Monitors also said the next MacGenius appt. was "approx. 8:30pm." Glad I made an appt! I was served about 15 min. later, during which time the monitors had changed to "No more MacGenius appts. available today, please try tomorrow." However, one guy came by without an appt. and was told he would be put on standby and to come back in 30 min.
Once I explained my issue with my MacBook battery, my Genius tried one of his batteries. "I just want to make sure it's your battery and not your motherboard." My machine worked fine, so he said "No problem, I'll have you out of here in 10 minutes." He got me a brand new battery, tested it, and put my old one in a box on the rear counter with four others. He pulled the serial number from the "About this Mac" area, didn't need my receipt for purchase date or anything. I had even printed this page: http://www.apple.com/support/macbook_macbookpro/batteryupdate/ to use as ammunition, but didn't need it. He did approve highly of my dashboard widget "iStat pro", available here: http://islayer.com/.
So the battery issue is a very common problem, and one that Apple has tried to deal with as painlessly as possible for the consumer. My Genius did ask if the battery showed an "X" in the icon bar, and I said no. Just wouldn't run on battery. On the way out of the store, one of the 3 MacBooks, in fact the one closest to the door, had an "X" on the battery icon. When I unplugged the power, it shut down immediately! The moral of the story is to contact Apple immediately with problems and give them a chance to fix them. Hope this helps others.

My macbook won't start up, it gets stuck on the blue screen. can it be fixed? i suspect a hacking due to a strange phone call earlier which i thought was a scam.

my macbook won't start up, it gets stuck on the blue screen. can it be fixed? i suspect a hacking due to a strange phone call earlier which i thought was a scam.

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

MacBook won't start up (mainboard)

Hi to everybody!
My MacBook won't start up anymore.
I know since several week that the mainboard has problems: when I pressed on the bottem around the battery, it restarted randomly.
I didn't send it in yet because I needed it and could live with this flaw.
But now it doesn't start again. I just hear one single click from the disc-drive and then nothing happens. I'd just need to reboot it ONCE to backuo my data before sending it in.
Do you have any ideas how I could make it work?
Thanks,
Bensch

You will need another mac to do this, but if you follow this article it will show you how to mount your drive as an external harddrive on another computer.
Or else you could just remove your harddrive.
but give this a try first.
http://docs.info.apple.com/article.html?artnum=58583

Macbook won't start after recent update

Hi Guys,
Got a problem with a month old Macbook. Clicked for the recent updates and after it restarting the Macbook won't start up past the Apple logo and the rotating symbol beneath it.
Any ideas ? Thanks in advance
Nick

Hi Nick,
Check out these two articles:
http://support.apple.com/kb/TS1541 (Mac OS X 10.5: Troubleshooting installation, startup, and login issues)
http://support.apple.com/kb/HT2956 (Troubleshooting Mac OS X installation from CD or DVD)
Running Disk Utility and trying to verify the startup volume or starting up in Safe Mode would probably be the next best course of action.

MacBook won't click

Similar Messages

Maybe you are looking for