MacBook won't even turn on after installing new ram

I am using the 2010 MacBook (white 13 inch) I bought ram (two 2gb modules) and was going to install it. I removed my Original ram, but accidentally powered it on it the process (no ram was inside). I got a longed beep. I held the power button and shut it off. I then put the ram back in and it won't turn on. I don't hear any parts moving, no power, nothing. Yes I put the ram in right, an it's tight as can be. Its pushed in well. Help! I never put the new ram in!

The new ram doesn't fit. The laptop won't turn on with old ram. It worked before I removed it now it doesn't. It's I'm there tight so don't tell me to put it in with pressure because I did

Similar Messages

  • MacBook won't even turn on after attempting to Install Windows XP with Bootcamp

    Help?!

    The new ram doesn't fit. The laptop won't turn on with old ram. It worked before I removed it now it doesn't. It's I'm there tight so don't tell me to put it in with pressure because I did

  • Mac crashes regularly after installing new RAM

    My laptop crashes at least once a day ever since installing new RAM. It seems to be triggered by quitting programs, usually Firefox, Logic or Spotify. There was nothing else connected to the Mac that brought about the latest crash but I do use an Mbox 2 on a regular basis.
    Below is the last crash report and also the RAM profile. It's Kingston brand if that means anything.
    *_Crash Report:_*
    Interval Since Last Panic Report: 55868 sec
    Panics Since Last Report: 1
    Anonymous UUID: AEEF5666-4C4E-4FC1-AC7A-5A500F952BF9
    Sat Jan 22 00:00:25 2011
    panic(cpu 1 caller 0x2aab55): Kernel trap at 0x8b042474, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x8b042474, CR3: 0x00100000, CR4: 0x00000660
    EAX: 0x09947100, EBX: 0x09ad4a00, ECX: 0xe15f0000, EDX: 0x0a133800
    CR2: 0x8b042474, EBP: 0x5294bb68, ESI: 0x08bd7f40, EDI: 0x0085f838
    EFL: 0x00010246, EIP: 0x8b042474, CS: 0x00000008, DS: 0x03450010
    Error code: 0x00000010
    Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
    0x5294b968 : 0x21b50c (0x5d42fc 0x5294b99c 0x223974 0x0)
    0x5294b9b8 : 0x2aab55 (0x59616c 0x8b042474 0xe 0x596336)
    0x5294ba98 : 0x2a09a8 (0x5294bab0 0x246 0x5294bb68 0x8b042474)
    0x5294baa8 : 0x8b042474 (0xe 0x48 0x52940010 0x230010)
    0x5294bb68 : 0x1854f8f (0x9ad4a00 0x0 0x5294bbf8 0x60)
    0x5294bb88 : 0x4ff5ae (0x9ad4b00 0x85f838 0x1 0x0)
    0x5294bba8 : 0x50f6e0 (0x9ad4b00 0x85f838 0x5294bbd8 0x4ff931)
    0x5294bbd8 : 0x50f854 (0x8bd7f40 0x0 0x1 0x0)
    0x5294bbf8 : 0x4ff5ae (0x8bd7f40 0x0 0x1 0x1)
    0x5294bc18 : 0x4ff5c9 (0x8bd7f40 0x0 0x5294bc48 0x4ff5ae)
    0x5294bc38 : 0x531e12 (0x8bd7f40 0xffff 0x8bd4f84 0x4ff5c9)
    0x5294bc58 : 0x531e45 (0x8bd4f80 0x246 0x5294bc98 0xb18e540)
    0x5294bc78 : 0x4ff5ae (0x8bd4f80 0x0 0x1 0x1e)
    0x5294bc98 : 0x4ff5c9 (0x8bd4f80 0x0 0x5294bce8 0x0)
    0x5294bcb8 : 0x2844eb (0x8bd4f80 0xb18e540 0x1e 0x5294bce8)
    0x5294bd08 : 0x21d8d1 (0xa088398 0xb2555a0 0x997aa24 0x1)
    0x5294bd48 : 0x210a3a (0xa088300 0x12 0x5294bda8 0x20f45c)
    0x5294bda8 : 0x21dda0 (0xa088300 0x10000 0x0 0x2107c2)
    0x5294bdd8 : 0x23f567 (0x5294bdfc 0x24 0xa4289e4 0x0)
    0x5294be28 : 0x214f6f (0xb18e540 0x1 0x1 0x221bb4)
    0x5294be78 : 0x215581 (0x7fc7420 0x33303 0x43dfe330 0x8f1e1f4)
    0x5294beb8 : 0x22c521 (0x7fc7420 0xc971640 0x5294bf08 0x47a0f3)
    0x5294bf08 : 0x47ab28 (0x8f1e1f4 0x0 0x0 0x2ea2)
    0x5294bf58 : 0x47ab56 (0x8f20000 0x0 0xc971684 0x0)
    0x5294bf78 : 0x4f0f7d (0x8f20000 0xc971640 0xc971684 0x0)
    0x5294bfc8 : 0x2a0ef8 (0xa1916c0 0x1 0x10 0xa194964)
    Kernel Extensions in backtrace (with dependencies):
    com.digidesign.mbox2.driver(8.0.0f1)@0x184e000->0x1871fff
    dependency: com.apple.iokit.IOAudioFamily(1.7.9fc4)@0x90c000
    dependency: com.apple.iokit.IOUSBFamily(4.1.7)@0x1232000
    dependency: com.apple.driver.AppleUSBMergeNub(4.1.5)@0x1292000
    dependency: com.apple.kext.OSvKernDSPLib(1.3)@0x908000
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x948000
    dependency: com.apple.driver.AppleUSBComposite(3.9.0)@0x1266000
    BSD process name corresponding to current thread: Spotify
    Mac OS version:
    10H574
    Kernel version:
    Darwin Kernel Version 10.5.0: Fri Nov 5 23:20:39 PDT 2010; root:xnu-1504.9.17~1/RELEASE_I386
    System model name: MacBook7,1 (Mac-F22C89C8)
    System uptime in nanoseconds: 10016535514139
    unloaded kexts:
    com.apple.driver.AppleMCP89RootPortPM 1.11 (addr 0x11cd000, size 0x20480) - last unloaded 250987080117
    loaded kexts:
    com.digidesign.mbox2.driver 8.0.0f1 - last loaded 49888220612
    com.rogueamoeba.hermes 2.0.2
    com.paceap.kext.pacesupport.snowleopard 5.7.2
    com.Cycling74.driver.Soundflower 1.5.1
    tc.tctechnologies.driver.PaeFireStudio 8028
    com.digidesign.iokit.DigiIO 8.0.0f1
    com.digidesign.iokit.DigiDal 8.0.0f1
    com.apple.driver.AppleHWSensor 1.9.3d0
    com.apple.filesystems.autofs 2.1.0
    com.apple.driver.AGPM 100.12.19
    com.apple.driver.AppleMikeyHIDDriver 1.2.0
    com.apple.driver.AppleMikeyDriver 1.9.9f12
    com.apple.driver.AudioAUUC 1.13
    com.apple.driver.AppleUpstreamUserClient 3.4.5
    com.apple.driver.AppleMCCSControl 1.0.17
    com.apple.driver.SMCMotionSensor 3.0.0d4
    com.apple.driver.AppleHDA 1.9.9f12
    com.apple.DontSteal_Mac_OSX 7.0.0
    com.apple.driver.AudioIPCDriver 1.1.6
    com.apple.driver.AppleIntelPenrynProfile 17
    com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
    com.apple.driver.AppleLPC 1.4.12
    com.apple.driver.AppleBacklight 170.0.34
    com.apple.GeForce 6.2.4
    com.apple.driver.AppleUSBTCButtons 200.3.2
    com.apple.driver.AppleUSBTCKeyboard 200.3.2
    com.apple.iokit.SCSITaskUserClient 2.6.5
    com.apple.BootCache 31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.iokit.IOAHCIBlockStorage 1.6.3
    com.apple.driver.AppleHPET 1.5
    com.apple.driver.AirPortBrcm43224 426.36.1
    com.apple.driver.AppleAHCIPort 2.1.5
    com.apple.driver.AppleUSBHub 4.1.7
    com.apple.nvenet 2.0.15
    com.apple.driver.AppleUSBEHCI 4.1.7
    com.apple.driver.AppleUSBOHCI 4.1.5
    com.apple.driver.AppleSmartBatteryManager 160.0.0
    com.apple.driver.AppleEFINVRAM 1.4.0
    com.apple.driver.AppleRTC 1.3.1
    com.apple.driver.AppleACPIButtons 1.3.5
    com.apple.driver.AppleSMBIOS 1.6
    com.apple.driver.AppleACPIEC 1.3.5
    com.apple.driver.AppleAPIC 1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
    com.apple.security.sandbox 1
    com.apple.security.quarantine 0
    com.apple.nke.applicationfirewall 2.1.11
    com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
    com.apple.driver.AppleProfileReadCounterAction 17
    com.apple.driver.AppleProfileTimestampAction 10
    com.apple.driver.AppleProfileThreadInfoAction 14
    com.apple.driver.AppleProfileRegisterStateAction 10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction 20
    com.apple.driver.AppleSMBusController 1.0.8d0
    com.apple.driver.DspFuncLib 1.9.9f12
    com.apple.iokit.IOFireWireFamily 4.2.6
    com.apple.iokit.IOSurface 74.2
    com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
    com.apple.iokit.IOSerialFamily 10.0.3
    com.apple.iokit.IOAudioFamily 1.7.9fc4
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.driver.AppleHDAController 1.9.9f12
    com.apple.iokit.IOHDAFamily 1.9.9f12
    com.apple.driver.AppleSMBusPCI 1.0.8d0
    com.apple.iokit.AppleProfileFamily 41
    com.apple.driver.AppleSMC 3.1.0d3
    com.apple.driver.IOPlatformPluginFamily 4.5.0d5
    com.apple.nvidia.nv50hal 6.2.4
    com.apple.NVDAResman 6.2.4
    com.apple.iokit.IONDRVSupport 2.2
    com.apple.iokit.IOGraphicsFamily 2.2
    com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
    com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
    com.apple.iokit.IOBluetoothFamily 2.3.8f7
    com.apple.driver.AppleUSBMultitouch 206.6
    com.apple.iokit.IOUSBHIDDriver 4.1.5
    com.apple.driver.AppleUSBMergeNub 4.1.5
    com.apple.driver.AppleUSBComposite 3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily 1.6
    com.apple.driver.XsanFilter 402.1
    com.apple.iokit.IOAHCISerialATAPI 1.2.5
    com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
    com.apple.iokit.IO80211Family 312
    com.apple.iokit.IOAHCIFamily 2.0.4
    com.apple.iokit.IOUSBUserClient 4.1.5
    com.apple.iokit.IONetworkingFamily 1.10
    com.apple.driver.NVSMU 2.2.7
    com.apple.iokit.IOUSBFamily 4.1.7
    com.apple.driver.AppleEFIRuntime 1.4.0
    com.apple.iokit.IOHIDFamily 1.6.5
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages 289
    com.apple.iokit.IOStorageFamily 1.6.2
    com.apple.driver.AppleACPIPlatform 1.3.5
    com.apple.iokit.IOPCIFamily 2.6
    com.apple.iokit.IOACPIFamily 1.3.0
    Model: MacBook7,1, BootROM MB71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.60f5
    Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.1)
    Bluetooth: Version 2.3.8f7, 2 service, 12 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: TOSHIBA MK2555GSXF, 232.89 GB
    Serial ATA Device: MATSHITADVD-R UJ-898
    USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0x06630000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0x06300000
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24600000
    *_Memory Profile_*
    Memory Slots:
    ECC: Disabled
    BANK 0/DIMM0:
    Size: 2 GB
    Type: DDR3
    Speed: 1067 MHz
    Status: OK
    Manufacturer: 0x0000
    Part Number: 0x000000000000000000000000000000000000
    Serial Number: 0x00000000
    BANK 1/DIMM0:
    Size: 2 GB
    Type: DDR3
    Speed: 1067 MHz
    Status: OK
    Manufacturer: 0x0000
    Part Number: 0x000000000000000000000000000000000000
    Serial Number: 0x00000000

    It's almost impossible to trace back the panic report to a specific cause, but it's highly suspicious that you started experiencing problems after installing new RAM.
    It's also strange that your RAM has no stated VendorID, Part Number or Serial Number.
    I would return this memory poste haste.
    Alternatively, if the DIMMs are from Kingston's ValueRAM range, just dump them in the garbage because that's where they belong. While you're there, look for any other RAM that someone else has thrown away - chances are its ValueRAM, too (hint: I have never seen a single ValueRAM DIMM work in any of my systems, so I avoid them like the plague - shame, since Kingston used to have such a good reputation).

  • Laptop freezes after installing new ram card.

    Hi,
    i recently upgraded my ram card on my toshiba c650d laptop. after installing the ram card the laptop began to freeze while in the desktop and then it could be resumed when Alt+Ctrl+Del was pressed.
    and the laptop wouldn't wake from the sleep mode.... 
    please help me this is urgent...as for im leaving my home country for studies.
    thanks for the help in advance
    Malith Ratnayake.

    Hello Malith Ratnayake,
    After changing the old RAM by the new one, this issue occurs?
    If the issue doesn’t occur when you change back to use old ram, I think it is the RAM hardware issue.
    Please contact the hardware manufacturer for better support.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • 4 hrs later - Computer shut down after installing new RAM (mid 2007 Imac)

    Mid 2007 imac and I installed new Ram. It worked for 4 hrs then the Imac shutdown. The pressed power button but no power. Unplugged and replugged the power cord and 3 beeps sounded. I am wondering if it worked for 4 hrs or so, then why did it would it fail 4 hrs later?
    I am running the correct ram because in system profiler under memory - it said that everything was ok.
    Any ideas?

    or maybe the back tray wasn't tight enough?
    I re-installed it now and so far so good.... I pressed tight and in an upwards motion. We'll see what happens

  • Light will not turn off after installing new cyano cartridge

    Light will not turn off after new cyano cartridge installed

    I suspect that the ones that say they will work with Windows 8 on the box.  If it does not say that, check the maunfacturer's website.  They eventually will have to give Windows 8 support for the new cards or loose out to the competitors cards.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • After installing new RAM module macbook will not wake without re-start

    Im having a little problem with my macbook. It operates normally and the new RAM appears to function as normal except when the computer is in sleep mode, it appears to sleep as normal but when the lid is raised or the power button depressed to wake the system up it will not do so without a full re-start. Any help is much appreciated. I have tried re-setting the PRAM and performing the usual maintenance functions from OnyX.
    Thank you.

    Did replacing the RAM fix the problem? I am also experiencing the same issue. The RAM works great when the computer is running but occasionally I cannot get the computer out of sleep mode and must reset the entire machine. Is the only cause of this a bad stick of RAM?

  • Problem after installing new ram

    Just installed 1 MB of new ram. Everything appears to work with one very annoying problem that never existed prior to installation of ram. The problem is that the window moves slightly with any movement of the mouse. Not a great deal but enough to hide the menu at top of screen. I ran an Apple Hardware Test and all hardware passed. I changed the mouse but no cure. This happens with nothing running so I assume it is not software. It doesn't appear to affect the operation but it tends to make one sea sick with the up and down and side to side motion anytime the mouse is moved.
    Shure would appreciate any help with this.
    Doug

    Open the Universal Access pane of System Preferences and turn off the Zoom option in the Seeing tab.
    (27764)

  • The display on my MacBook won't always turn on after coming out of sleep

    Just 10 min ago i had to use the bathroom. I closed the lid of my MacBook. When I came back I opened it up. The disk drive made the usual noise, the fan turned on, and keyboard lit up, but the screen didn't turn on. So then I held down the power button until I heard the fans go off. Then I hit it again and the macbook started up like when it would after hot swapping the battery. The MacBook was also charging during the entire time.
    What is wrong?
    Any suggestions?

    Yes my issue is that, for any extended period, the display won't turn on at all - a hard reboot is required. And it went away if the total number of ram is 3gb or similar (not matter what bar of 2gb ram I used) so possibly the ram is not the cause - i also have test with memtest & apple hardware test (extended / loop-mode)
    I'm thinking of installing windows 7 / vista in bootcamp to see if the problem occurs to figure out if this's drivers / software issue with mac osx. I will come back and update on this later.
    I have rung apple support and they tell me that only apple certified ram will ensure compatibility and the said that ram is the issue - I used OWC ram (which never had any compatibility issue before).
    Stayed tune!

  • My phone won't even turn on after ios7

    I downloaded the new software and now my phone keeps telling me to plug it into itunes. When I do that it wants me to restore to factory settings because there was a problem with the download, but then itunes gives me an error. I have tried rebooting my phone and everything but nothing works. I don't know what to do. Can anyone shed light on my situation?

    Try following the steps in this article: http://support.apple.com/kb/HT1808

  • NB505-N500 Won't Start After Installing New RAM

    I just watched a YouTube video showing how to replace RAM in a Toshiba netbook, but now my computer won't start even after I put back in the original RAM. On the parts label, it shows D3. I bought Crucial CT25664BC1067 2GB 204-PIN PC3-8500 SODIMM DDR3 Memory Module. Can someone provide some guida...
    Thank you.
    Solved!
    Go to Solution.

    You may want to contact Crucial.
    There's a lot of talk of incompatibility in the one-star reviews on Amazon, which are about 14% of the reviews.
    - Peter

  • Macbook dead after installing new ram (1gb in each slot)

    After upgrading my MB ram to 2gb (1gb each slot) my MB would not start, no lights or action. I replaced the old ram and still nothing. I then went to a genius bar and they tested it out and even replaced the ram with ones they had and still nothing. I was then told that the logic board was dead. Has anyone had this problem? Since it is out of warranty I have to pay $280 to have them repair it which is a flat fee and they will fix it no matter what is wrong which I find is better then some rates I have seen posted online for $600 just for the logic board itself.
    My MB is the 1.83, could 2gb be too much? I have had the MB since July 2006 and recently had battery problems before I replaced the ram. Could this have fried the logic board?
    having a mac nightmare right now!

    Improperly seated RAM is fairly common... but I haven't seen many comments about inserting RAM actually damaging the logic board... but you do have to use quite a bit of force to get them in there. The good thing is the price that they are charging you for the repair... as you mentioned, I've never seen them charge that little for replacing a logic board. I wonder if that is something new.

  • HP Deskjet F4200: Won't Print In Black After Installing New HP Black Ink Cartridge (XL)

    I am reading on this board that this problem exists on a lot of other HP injet printers.
    One post is a detailed post on how to dis-assemble a F4620 to access the clogged print heads so that you can unclog it by running it under hot (tap) water.
    It seems that these products were designed poorly, or with planned obsolescence so when this problem occurs (usually outside of warranty) and you call you tech support, HP will try to get more money of you by having you subscribe to post-warranty tech support, or better, have you end up buying another HP injet, and have the same issue again down the road.
    It the print heads could be accessed and removed for sevice more readily, this problem would be more easily dealt with by most users.
    Does anyone know if the dis-assembly instructions for the F4620 are the same for the F4200?  Or better still, is there a U-tube out there on how to access/dis-assemble the F4200 to remove the print head for servicing (unclogging)?

    The Officejet 4620 has an entirely different design from your printer.  It has permanent printheads with separate ink supplies.  [I strongly discourage folks from disassembling the printhead on the Officejet 4620 to clean it, the likely result will be a damaged printer.  It would be much better for these folks to call HP support regardless of warranty as described in the post here.  If they are in the US call 1-800-HPINVENt, elsewhere see the contact information here.]  This does not apply to your printer.
    The Deskjet F4200 series printer you have is an entirely different design.  Your printheads are integrated into the print cartridges, and replaced with each cartridge replacement.  In your other post I gave a link for troubleshooting steps for your printer, which would lead to this document.  If the steps there do not resolve the issue I would suggest removing the black cartridge and gently blotting the printhead on a damp tissue.  This should result in a strong black blot.  If there is no ink at all it is possible the protective tape was not removed (sometimes the pull tab can separate from the tape. leaving the tape on the cartridge).   If there is just a weak smudge of ink it is possible the cartridge is defective.  In this case you could contact your dealer or HP for a replacement.  If you want to take a more immediate action you could try soaking the printhead as follows:  put about 1" of very hot (but not boiling) water in a teacup.  Put the cartridge in the teacup with its nozzles pointing down and let it soak for ten minutes.  After soaking remove the cartridge and gently dry the electrical contacts with a lint free tissue.  Replace the cartridge in the printer and print a test page.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Phone will not turn on after installing new updates?, phone will not turn on after installing new updates?

    my iphone asked if i wanted to update it. i selected yes.. then about 10 mins later it shut off. thats been 3 hours ago and now it wont turn on. ive only had it for a week. what do i do??
    ive tried charging it and i pluged it in to my computer.. i help down the power button. nothing seems to work.

    1. Charge with the AC adapotor for at least 30 minutes.
    2. Reset the phone: press both the home and power buttons for up t0 1 minutes, releasing when the Apple logo appears

  • Blank screen after installing new RAM

    I have a 1.5 Ghz, 512 DDR SDRAM and it's starting to get sluggish so I bought 1GB DDR 333MHz RAM and replaced the samsung card inside. When I start up you can hear the chime but the screen is blank. When I put the old card back in it works again.
    Anyone any ideas how to resolve or have I bought dodgy/cheap/wrong RAM?

    Welcome to the Apple discussions.
    Does the Samsung memory have the same label or BNO number on it as http://eshop.macsales.com/item/Samsung/27SAMSO1GB/ ?
    Samsung is one of several brands that generally work fine in our Powerbooks.

Maybe you are looking for