Macbook won't let me enable double sided printing? (Samsung ML-191x252x series)

Hi,
i recently bought a macbook pro (currently running OS 10.8.4). I connected it to my 3 year old Samsung ML-1915 printer yesterday to print something and discovered i cannot enable the double sided printing option... I checked online how to do it from system preferences , only to discover that the option actually isn't available to me. I installed the driver online from Softpedia but i still can't switch on duplex printing when i go to system preferences. This really bugs me since i can't even select even/ uneven pages to print (to do it manually..).
Any ideas/hints how to fix this?
Kind greets,
Laurens

Hello,
so i updated to 10.8.5, then discovered there was an additional Samsung update in App store. I installed that one as well, but it still didn't show in system Preferences. Then i deleted the printer, added it again and it still didn't work... I contacted Samsung chat support, they helped me to get the latest driver, and hooked me up with Smart Panel. Smart panel seems useless though, as it doesn't really allow me to do anything special. It's just a small box that indicates the toner level. Nothing to add about software, or double sided printing. 'm kinda lost by now...

Similar Messages

How do I enable double sided printing on my iPad through the HP ePrint app?

HP Laser jet 1102w
I have Windows 7 64 bit and a original iPad.
I would like to save paper when I am printing from my iPad. Is there a setting to enable double-sided printing when printing from an iPad using the HP ePrint app?

Hi,
Printing a manual duplex printing is not supported by the HP ePrint app or AirPrint as well, it can only be done with printers who provide automatic two-sided printing.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

My macbook won't let me download the new version of itunes and my ipod won't sync without the new version of itunes

My macbook won't let me download the new version of itunes and my ipod won't sync without the new version of itunes. Please help!!!

Are you running Snow Leopard or later?
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.

If my macbook won't let me sign in on facetime what should i do?

if my macbook won't let me sign in on facetime or messages what should i do?

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
           ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
           ▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
           ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
          Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound outputand Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.apsd.plist
Right-click or control-click the highlighted line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 12
Reset the NVRAM.
Step 13
Reset the System Management Controller (SMC).
Step 14
Reinstall OS X.
Step 15
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support. When you set up a support call, select "Apple ID" as the product you need help with, not the hardware model. That way, if you're not under AppleCare, you may be able to talk your way out of being charged for the call.

My macbook won't let me sync music or apps as it says my computer is not authorized, even though when I clicked to authorize it it says that it already is. how do i fix this?

my macbook won't let me sync music or apps as it says my computer is not authorized, even though when I clicked to authorize it it says that it already is. can anybody tell me how i could fix this? iv already tried unarthorising the computer and re authorising it but it still doesnt seem to work

Hey CarlyR_,
Thanks for the question. I understand you are experiencing issues related to iTunes Store authorization. The following resources may help to resolve these issues:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks,
Matt M.

MacBook won't let me let me install mountain lion because i don't have the previous owner's password how do i get around that

MacBook won't let me let me install mountain lion because i don't have the previous owner's password how do i get around that

What model year it the Mac you have? If it is a Late 2011 or newer model then you can first reinstall the Original version of OS X that came on it by using the Online Internet Recovery system. Hold down the Command+Option/Alt+r key at startup and hold them down until you see a Spinning Globe in the center of the screen. From the screen that comes up use Disk Utility to Repartition the drive as one partition aand when that is done close DU and Select Reinstall Mac OS X.
If it is older then a late 2011 model then you will need the Original System disks for that Mac. These can be order from Apple for a small charge.

MacBook won't let me type anything at all

MacBook won't let me type anything at all. It's running Mac OS X 10.6.8 Snowleopard

You have to understand the difference between an Update and an Upgrade.
An Update is a free change to add to the base code or as a bug fix within an existing Operating System. Such as the .8 added to 10.5.
An Upgrade is a complete new Operating System that must be purchased. Such as 10.5 Leopard to 10.6 Snow Leopard.
10.5 Leopard was written for Power PC Macs with code added to allow it to run on Intel processors.
10.6 Snow Leopard has completely rewritten code and only runs on Intel Macs.
10.7 Lion used some 32 bit which allows it to run on Late 2006 through Early 2008 MacBooks and a lot of 64 bit code.
10.8 Mountain Lion is pure 64 bit, which excludes more systems than Lion did. It can only run on the Late 2008 through Mid 2010 MacBooks. It's not something you can add memory to, for example, as it involves the base architecture.

My new MacBook won't let me join a network or cancel out . The buttons won't respond..

My new MacBook won't let me join a network or cancel out . The buttons won't respond..now I can't even close the message page!! Just got it.. Sick

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Double sided printing with Adobe XI

I have asked many times but don't get an answer. Do you have any staff or "experts", as you put it, who will answer my question?

It appears we are simply screwed by HP who designed this printer to use up as much ink as possible and not allow you to use black only no matter what is said. Tons of complaints and no anwers. Better do some research before buying next time and do not consider HP, they apparently lie about capabilities and blame the consumer when questioned. My 6500 is the worst printer I have ever had. I had to take color photos to CVS to get good copies at 4 bucks each and it simply won't print double sided with black only anymore. Scanner never worked, well it did once and wireless doesn't work either.
If there is a way to make double sided print in black only on a PC, 64 bit with Windows 7 Home Edition, let me know.
Jim

HP Laserjet 1300 Manual Double Sided Printing with Windows 7

I just purchased a new laptop with windows 7, love the interface but have some hiccups here and there. And the one that is the biggest pain is printing. I have a HP Laserjet 1300 connected via a linksys print server. Single sided printing works just fine, but I used to be able to (and still can from my work laptop running XP and from my wifes Laptop running Vista Home) print double sided manually. But now even though it says duplex, it will not work and I think the Windows Driver believes that it is a duplexer attached to the printer verses a manual feature. Any ideas on how to get my manual double sided printing back?

Nice one...
I found you can also modify the "Manual Duplex Help" section to provide instructions to the user while duplex printing :
The following prn_grp displays pictures similar to the Laserjet 1300 and has the right procedure (take the printed pages and place them in the same orientation in the tray) :
<prn_grp models="HP LaserJet 1300;HP LASERJET 1300N;c5c5f890996e5fc5d7ffd96f8c759f2d ;555a2593970cf8b77ec5e1c722373e36 ;065e3643626aa153eb624120e21031cc ;5541b14acbc6bb39fefc0967181142e0 ;e6885ab28dbc6e127ae4963acf4d8ccc ;8f6b80f605bb593212acd699c0516d06 ;1d9e0f01c72b2d0001e58751826b42ac ;f77381023eb218bd6c75fbb5cd55337e ;8da5efe243e316c3fbd7ccd09d330f48 ;60caa8832f86a2502a3e4f31c6aa82f5 ;d1eb75d092f98ee058366d6d32b1c5d1 ;acb248ba464fba4feeac598ee070e4da;25b289c5a1af52c4c30c70e60d6a5486;
5ad2ab06ec3d7c97c5236b04e461072d;a25c6f53a65697130a90c0bf48622fa1;835a8e29c28829102fb4dcccacf6c3dd;dc488b59d678f119ca11d4425e31bf36;b868c723ee9270bd0d70e96293adacf7;2a51e03acc06b149b4460fda9c7d4560;bb95bf471925e96c47a6a05d3252c357">
<fname name="HPManualDuplexDialogItems">
<option name="InstructionID_01_FACEDOWN-NOROTATE" value="BitmapID_227_StringID_3313"/>
<option name="InstructionID_02_FACEDOWN-NOROTATE" value="BitmapID_505_StringID_3070"/>
<option name="InstructionID_03_FACEDOWN-NOROTATE" value="BitmapID_231_StringID_3065"/>
</fname>
</prn_grp>
More importantly, I was also able to modify the hpcu1306.xml file to enable full 1200 dpi support, by adding the following prn_grp at the end of the "Print Quality" section (after the hp LaserJet 9040 prn_grp and before the closing "</feature>")
<prn_grp models="HP LaserJet 1300;HP LASERJET 1300N;">
<fname name="PrintQualityGroup" default="PQGroup_4">
<option name="PQGroup_2"/>
<option name="PQGroup_4"/>
<option name="PQGroup_5"/>
</fname>
</prn_grp>
NB : PQGroup_2 is for 600 dpi, PQGroup_4 is for FastRes 1200 dpi (fast) and PQGroup_5 is for ProRes 1200 dpi (finer, slower, more memory used).
The modified hpcu1306.xml file is available here : http://pastebin.com/6UxtcSaZ

How do I get my Canon ip400 to do double sided printing on my Mac?

i have a canon pixma ip4000 printer that can do duplex or double sided printing. it works fine on my pc but my mac wont let me choose the two sided option... ant ideas how to get this to work??

I have the same printer and this is what you do. Say your in Safari, go to Print and under Orientation there is a box which says Safari and has a drop down arrow. Click on this arrow and from the drop down list select Duplex Printing & Margin, check the box against Automatic Duplex Printing and select any further options as you want. Click Print.
Joe

Cannot turn off double sided printing on HP 8600 OSX v 10.8.4

Hello! I cannot figure out how to turn off double sided printing. I do not see an option in the system print dialogue or on the printing settings itself. When I remove the double sided attachment from the back of the printer - it won't feed the paper properly. Help!

Hi,
Please follow the steps below in order to disable two-sided printing:
On the File menu, select Print. The Print window appears.
NOTE: The Print window might be minimized. Click the blue triangle next to the printer name to see all available settings.
In the expanded Print window you will find next to Copies the checkbox for Two-Sided. Uncheck that box.
NOTE: If the checkbox does not appear within the specific application print dialog, skip this step.
Click the lowest selection box, listed as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
Select Layout from the drop-down menu.
Set the Two-Sided option as Off.
You may save the settings for future use by clicking Presets > Save Current Settings as Preset... Any used preset will remain default till another preset will be used.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Double sided printing

Hi everyone,
I've been reading posts by others regarding problems with double sided printing on mac. Since I changed to a mac, I havent been able to print double sided from my epson sx425w printer. This can be quite annoying if you a lot of pages to print. The double sided print option is just disabled so I cant even select it and I dont have the option of "Duplexer" or "Duplex Printing" as suggested in other posts. Besides, I've not been able to use my scanner since upgrading to Mavericks-I know others have had similar problems too.
Anyone come across similar problems?
Thanks

The sx425w is not listed on:
http://support.apple.com/kb/HT3669
which means you are totally dependent on the Epson drivers. There are sx420w drivers, which may work for it, or may not. Contact Epson for details.
The sx425w drivers for Print and Scan has not been updated since 2010:
http://esupport.epson-europe.com/FileDetails.aspx?lng=en-IE&data=FCFfEfoyEiHIEHY ej3fxPyCU002F5lk7kA7sM98zHIPBYkwU003D&id=327010
(print)
http://esupport.epson-europe.com/FileDetails.aspx?lng=en-IE&data=FCFfEfoyEiHIEHY ej3fxPyCU002F5lk7kA7sM98zHIPBYkwU003D&id=326327
(scan)
And as such may still have elements to try to maintain compatibility with applications requiring old PowerPC code, which won't work with Mac OS X 10.7 or later.
The good news is that they mention the sx420w driver. So that suggests after applying it, and the update from Apple:
Epson Printer Drivers v2.17 for OS X
It may work. Repairing permissions with Disk Utility may help after all is said and done. Otherwise at least for scanning you may be forced to use open source drivers on my FAQs*:
http://www.macmaps.com/printersx.html
http://www.macmaps.com/macosxnative.html#SCANNER
Alternatively for duplex printing, you could print just even pages at one time, and then rotate the pages 180 degrees and flip them upside down and print odd pages to achieve duplex printing. Test first with only a couple pages in the tray until you get the sequence right.
* Links to my macmaps pages may give me compensation.

How do I disable my double sided printing?

I have an HP Office Jet PRO 8600 N911a printer and a MacBook Pro (OSX 10.9.2). I can't seem to disable the double sided printing. I do not have a copy doublesided box to check or uncheck when I use the drop down menu to print.
Can you tell me how to go back to single copy printing.
Thx
Debbie

When you start a print job with File> Print (or command-P), click the Show Details button at the bottom of the print dialog box. Then, click the lowest pull-down and choose Layout. The two sided option is toward the bottom of the box.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Need help with doing double sided printing!!!

i have a Epson XP-100 priniter and also MacBook pro laptop
i am having serious trouble with doing double side printing
can somebody assist me through please
thanks

Read the user manual that came w/the printer. It will tell you if double sided printing is compatible w/your current OS which you did not mention. If not, you will need to contact Epson tech support and/or post in their forums if they have one.

Macbook won't let me enable double sided printing? (Samsung ML-191x252x series)

Similar Messages

Maybe you are looking for