MacBook won't load past the gray apple screen, what do I do?

A few months ago my cat peed on my computer and despite the battery no longer working the computer its self continued working fine after letting it sit a few days.
A few weeks ago I accidentally unplugged it form the wall forcefully turning it off, when I tried to turn it back on it wouldn't go past the gray apple logo with the spinning pinwheel.
I've tried to troubleshooting it numerous times but even after letting it safe boot all night I came to no avail.
All the suggestions I've gotten on other sites say I sould re-install the OSX server, the problem being I don't know how, or which OSX I have, they also say the memory will probably be erased, I can't have this happen because I have many things I wrote on there that I have no where else. I bought this laptop in the first few days of 2009.
What do I do without erasing the memory?

Hello,
Could someone help me, please? I apologize for the long message but I want to be as detailed as possible.
My MacBook (purchased early 2006, white 13", upgraded to Leopard about a year ago with no problems until now) will not boot past the grey screen and spinning wheel.
Here' are the list of 6 steps I've followed so far and still is not working. Oh, and I do not have any peripherals attached to my MacBook:
1. Reboot in Safe Mode: tried pressing down the Shift key before the powering up sound AND after the sound. Could not get into Safe Mode. Did this several times, holding the Shift key for as much as a minute or two. Nothing but grey screen and spinning wheel.
2. Reset NVRAM/PRAM: CMDR+POption: Computer restarted but still goes into Grey Screen, spinning wheel and stays there forever.
3. CMD +S: I read this online. Gave me a black screen with a lot of information, but I don't know how to read the computer jargon, let alone know what to do with said info.
4. Disk Utility Repair Disk : Inserted my Leopard install disk. Went to Utility Disk. Performed a Repair Disk and I did get two error messages, something related to id 70000452 should be id 70000450 ( I'm sorry to say I cannot remember the exact error messages). But it showed as repaired. When I did a 2nd Repair Disk, I got the message that the volume appears to be OK. Turned off and on again, nothing but grey screen and wheel.
5. Disk Utility Repair Disk Permissions: got several error messages and this time some could not be repaired:
-Permissions differ on system/library/CoreServices/Front Row.app/Contents.... should be -rw-rw-r-- , they are lrw-rw-r--
I got this about 4 times.
-Permissions differ on System/Library/PrivateFrameworks/DiskManagement.framework/Versions/a/Resources/ DiskManagementTool has been modified and will not be repaired.
-Permissions differ on System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Resou rces/Locum has been modified and will not be repaired.
-SIUD file has been modified and cannot be repaired also shows twice.
I've read that these messages can be ignored. Is this true? I verified permissions after that, rebooted and still the same grey screen and wheel.
6. FINALLY: I tried to hook a FireWire from my notebook to my sis, iMac, and see if my HD shows up on hers so I can try to copy and save my pics and music. I was then planning to Erase and Reinstall. But my HD doesn't show up. I turned off both Macs and turned on, pressing T on my Notebook so it acts as a drive, but nothing shows up on my sis iMac. What am I doing wrong here?
And if it cannot be repaired, what do I do?
I'm an amateur photographer and would like to save all my pics, as well as my iTunes music. Much of everything else is just docs, and I think I backed the docs up, but not iTunes or the pics lately (not enough memory available in my flash drive). It also means I do not have a lot of RAM available (I know, I should've bought an external hard drive :o) to perform an Archive and Install.
Can I save my pics and music? Is it all lost? Help please?
Thanks
Andy

Similar Messages

  • My MacBook won't go past the gray startup screen.

    I shut down my MacBook pro during a software update because the update appeared to have frozen. When I tried to reboot my computer afterwards, it would go to the gray startup screen with the spinning gear and not progress any further. I have tried multiple times to restart it, each time getting the same result, I have also tried starting it up holding down shift, another time holding down control option p r, and also holding shift. Each time gave me the same result of freezing at the gray screen. Any idea on what I can do to resolve this problem?

    Hi,
    This article may help. What happened was a kernel panic. They can be caused by either hardware or software. Try the syeps outlined in the article and post back the results.
    John

  • MacBook won't load past the white startup screen.

    I'm going to start off by saying I'm a huge idiot.
    My MacBook was being sluggish last night, so I (impatiently) force-turned it off. Whenever I turn it back on, I get stuck at the white screen for about 10 minutes and the Apple logo never loads. I must've made the harddrive corrupt by turning it off while it was doing some important background work.
    Is there any way I can fix this? The data on there isn't important as I have my course work backed up, I just need it up and running for class tomorrow. Can I wipe the harddrive and do a clean install somehow?
    Hopefully someone can help.
    Edit: I managed to open Disc Utility with my Mac OS X 10.6 disc, and I can't even see my harddrive located anywhere.

    Sorry for the double post, but I can no longer edit the main one.
    I heard the most gut-wrenching sound when I held "Alt" to get to my partition, so I opened my MacBook up, removed the harddrive and reinserted it. I'm not sure if it was the harddrive that produced the noise, or the installation disc.
    Now I can see my Harddrive located in Disk Utility
    http://i.imgur.com/aQdBU.jpg
    http://i.imgur.com/qR38u.jpg
    After hitting Verify Disk I saw this:
    http://i.imgur.com/vhRIt.jpg
    So I hit repair and...
    http://i.imgur.com/eBLNH.jpg
    I try erase:
    http://i.imgur.com/Tp8bA.jpg
    And repair again:
    http://i.imgur.com/jrM3x.jpg
    I'm given so many errors, but they all point to the same conclusion...
    My Harddrive is fried and I need to look for a replacement. Could anyone point me in the right direction? My Macbook is really old I've even forgotten the type! It's a Black MacBook from around 2006 or 7 is my best guess. What harddrive would fit?

  • My macbook air won't get past the white apple screen.  I've tried power cycling the batter but won't help

    my macbook air won't get past the white apple screen.  I've tried power cycling the batter but won't help

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • My powerbook won't load past the grey apple logo screen

    I had been away on business for a few weeks and yesterday I decided to run the latest updates for my powerbook. In the middle of it the computer froze for what I think is the first time since I bought it 2 years ago. I ended up having to shut the computer down with the power button. When I turned it on it wouldn't and still won't advance past the grey apple logo screen with the progress indicator. It just sits there for hours on end if I let it.
    So far I've tried the following, all to no avail.
    Booting in safe mode I get the same result.
    Zapping the Ram
    Resetting the PMU
    Reinstalling OS X, during which the computer either randomly shuts down or goes to sleep and then shuts down and requires me to reset the PMU in order to start again.
    Running the hardware diagnosis. I did this once and it froze during the logic board test, 1 minute 6 seconds in to it.
    Anyone have any ideas that don't involve spending 900 dollars on a logic board? Thanks a lot for any help.

    joeuu, thanks for the reply. i checked the airport and the ram and both seem to be seated properly.
    i ran the quick hardware diagnosis and it came back showing everything was fine.
    when i ran the extended one i got more progress than i did the first time. it got to the RAM diagnosis (about 6:45 seconds in) and then froze - i let it sit like this for an hour and a half to make sure it was actually frozen.
    i also tried to run the disc utility from the installation disc and it just sits there with the progress wheel spinning, but nothing else is going on.

  • My Powerbook doesn't load past the grey apple screen

    my powerbook doesnt load past the grey apple strart up screen, after that it sais I need to reboot my computer.
    I've tried to boot from my install disk to get disk utillity to run, but the computer will crash again at the gray screen, before it starts running from the cd.
    I've also tried to reset PRAM and NVRAM and PMU, it all won't work, and crash on the gray screen.
    I dont care about loosing stuff, cause its just been formatted 3 days ago, it started crashing first when my laptop was in the middle of its software (maybe firmware) update.
    help! is there any way to get life back to my laptop?
    thank you.

    sorry, a correction
    my computer does start up from the instal disk (finally), and the Disk Utility program sais there are no errors, (in green).

  • My Macbook won't get past the start up screen

    Hey everyone
    I have a Macbook that's about 3 years old. I did an software update yesterday and since doing it the computer won't get past the start up screen. There's just the Apple logo and the rolling ball thing. It's been stuck there for around 30mins and nothing changes. I'm not really sure what has happened but I was wondering if there is any way I can fix it.
    Thanks for your time.
    Bevan

    Hey Lyssa
    I don't have a back up but I'm not to worried about that as it's my traveling computer and I only use it for the web and some word processing.
    I don't have the disks with me right now as I'm away from home. I'm not sure what I had updated, I think there was a lot because I hadn't don't it in a long time.
    If I can start it in safe mode what should I do?
    Thanks.
    Bevan

  • Won't go pass the gray apple screen

    I just signed out an apple computer at work and I guess I should of checked it before I left but when I got home and tried to turn it on nothing happened. So I plugged in the power cord and tried again. This time the gray apple screen came up but that was it. I was hoping to work on it this weekend since it had word and pages I was going to convert some files. Any suggestions? Worse comes to worse I can just return it on Monday but really wanted to see if there was a fix I could do.

    You can try resetting the SMC. Is the MacBook yours? If so, why don't you take it to the Genius Bar to see if the laptop could get fixed?
    Regards,
    bettyfromcalifornia

  • My laptop won't load past the main blue screen

    Hi, I went to restore my laptop to a previous point, it did the usual things, it switched it's self off to then restart again but won't load past the main blue windows 7 home premium page, it it keeps flickering as well, I've tried switching on and off and taking the battery out, nothing works, never had this happen before :-S

    Hello again, sorry that the steps that I we have attempted have not resolved the issue. I have a tool that you can try. It's called the HP Support Assistant. If you have any computer issues, the Support Assistant will find them and give you solutions to the issues or resolve them for you. Please click on the link that I have provided.   http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110990-1&cc=us&dlc=en&lc=en...
    Thanks again.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • My mac won''t go past the gray startup screen

    I was using my ibook g4 (1.33GHz) yesterday to rip a dvd, safari was also running. the computer froze and black writing appeared on the screen at the left hand side. It said something about 'kernel', but as i don't speak computer language i just held the power button to turn off the computer, hoping it would be fine once i restarted.
    I waited about a minute then i restarted but it wont go past the gray startup screen with the gray apple logo and the spinning progress wheel. I have tried to restart in safe mode and have also reset the PMU(power management unit) but still the same. I can't figure out what to do, and i really need to access files stored on my HD urgently. please if anybody can help me i''d really apprecite it,
    thanks.
    iBook G4   Mac OS X (10.4.9)  

    Hi,
    This article may help. What happened was a kernel panic. They can be caused by either hardware or software. Try the syeps outlined in the article and post back the results.
    John

  • My G5 shut down + when it restarted it won't go past the grey apple screen

    here's a general rundown of how I got to this point...
    last yr the hard drive on my '05 G5 went, so i had it replaced (6-7 months ago) and for the last 2-3 months i've had problems with involuntary shut downs (cut to black) it started happening once a day and then there were days where it would happen more often and then less often and eventually got to a point where it was happening every 5-20 minutes, so i brought it in to get looked at and was told that it was the power supply that was malfunctioning. I mentioned that I would likely be buying a new mac in the coming weeks ( i did yesterday) and was told that I should be ok between now and then without having it fixed and then when i did get my new computer they would transfer all of my old data onto the new computer and would be installing the new power supply before selling it to a local school. then, 3 days before I was going to get my new mac, it shut off yet again, but when it rebooted it never went past the grey apple screen. after 4 or 5 minutes the fan comes on and is amazingly loud and this is where it stays until i shut it off. i'm not sure if this is simply the power supply finally going going gone or if this has something to do with the very new hard drive or who knows what else; i just want to get my info from the old computer onto the new and hopefully get the couple hundred dollars that i was told my g5 was worth. is there something i can do to get past the grey screen before i bring it in?
    thanks in advance,
    Jeremiah

    I doubt that your data have been lost, the hard drive should be fine. Too bad that you're going to sell it, you could have used the hard drive in an enclosure to back up your new computer to. Please remember to make frequent backups/clones, I use SuperDuper! and it works perfectly. I have used it to re-clone a drive from the external when things have gone bad, you can also boot from a SuperDuper! clone.
    Anyway, let us know how things go, I'm pretty sure your drive will be fine.

  • Powerbook won't get past OSX gray apple screen

    powerbook pismo running OSX for years...much joy and happiness,
    up to this point.
    Upon starting up my powerbook, I get the good chime and then the gray screen with the apple but no spinning wheel at the bottom, it will go no further.
    It just sits there with the gray screen and the apple. I've tried the following:
    Safe mode
    Reset pram
    target mode from another mac shows the pismo hard disk. I can run disk utility on it and the drive is ok.
    Still no startup.
    Reinstalled the OS from the other mac using target mode and it installed ok. Still no further than the gray apple screen.
    It will not start from DVD or from a firewire drive with the OS installed on it
    It does see the system folder when I tell it to let me choose a system at startup. I choose it and we are back at the gray screen.
    Is this a pram or firmware issue maybe a internal battery
    I have other macs, and I can move on, but still would like to solve this puzzle.
    Thank you very much.

    zydeco,
    I am not sure if I can help, but here are a few suggestions...
    1. If you have the original software, you may still have the Apple Hardware Test CD. Disconnect all peripherals including a USB mouse, then see if you can boot to the CD.
    http://docs.info.apple.com/article.html?artnum=112433
    2. If you have the internal original AirPort card, remove this card and try starting. A bad card can prevent startup.
    http://docs.info.apple.com/article.html?artnum=50028
    If neither of the two suggestions help, please post back.

  • My G-5 Won't go past the Grey Apple Screen......HELP HELP HELP

    I have a G-5 PowerMac.
    Its about a year old.
    I have used it more than sparingly. I bought it for video editing and have no other programs installed on it that didn't come with the computer besides Final Cut Pro
    I tried to turn it on this morning to edit a project i'm working on and the thing just wont get past the Grey Apple Screen.
    I really need help here. My hardware warranty runs out on December 31st and I dont have money for the Applecare $250 is really steep.
    Help me turn the thing back on and get my editing going please
    Email me at [email protected] if you can help me out
    thanks
    Chris
    Power Mac G5 Dual Processor   Mac OS X (10.4)  

    Hey Cris
    I just got thru the same problem. My G5 was only 30 days old. I contacted Apple and after many phone calls I ended up purchasing the Applecare.
    The parts were on back order for two weeks and they ended up replacing the logic board and the processor.
    Good Luck!!!

  • MacBook won't go past the boot-up screen?

    Okay, so I had about 3,008 of other peoples' pictures on my MacBook that I didn't want. I sent them all to the Trash in iPhoto to get rid of them. I then two-finger clicked on the Trash in iPhoto and told it to empty trash. It asked me if I was sure I wanted to delete all 3,008 photos and I clicked yes. (in retrospect, I should have clicked no.) After the program had sat doing nothing except turning my mouse pointer into a spinning rainbow-wheel for about 15 minutes, I decided something must be wrong. I two-finger clicked the iPhoto application in my dock to try and tell it to Force Quit, but it just froze. the application didn't even shrink back to normal when I pulled the mouse pointer away from it. My friend said to just turn it off and try turning it back on, and held the power button down so the computer shut off. I waited a few minutes, tried to turn it back on, and all I got was the boot up screen (white with the gray apple logo and a spinning wheel thing underneath it) for about five minutes and then it shut itself off. It has been doing this every time I've tried to turn it on since yesterday afternoon. PLEASE help me!!

    I should also mention that I kind of just guessed on which operating system I'm running... I don't know, and I assume it's whatever they originally put on the MacBooks in 2008.

  • Mac mini wont get past the gray apple screen

    recently i bought a mac mini with intel i5 processor and os lion installed, it was perfectly running until today it wont start or rather get past the initial apple sreen with the spinning gear. yesterday i connected an external usb drive 1tb to use as backup disk and store my songs for itunes. today i cant use it , ihave tried safe mode booting , pressing command, option , p and r keys during startup, removing the power cord then reattaching it. anybody have a solution.

    i have tried removing the external drive but still problem persists

Maybe you are looking for