Macbook won't load past white screen, tried everything.

Hi all,
I've tried everything I've come across to get my Macbook running again. Tried booting into safe mode, didnt work, tried fixing using fsck in single-user mode, fsck said it worked but still wouldn't boot! Even tried verbose mode but came across disk0s2 I/O error.
Can anyone help me out, it loads up to the white screen with the grey apple logo and the loading wheel goes round and round but goes no where.
Working on Mac OS X but forget exactly which one.

Hi, I had a similar problem a couple of years ago, the problem ended up being my hard drive had crashed on my macbook. You should take it to your nearest Genius Bar, they will check and see if thats the problem for free, fixing however if it is that can get expensive, of course thats according to a very poor college student, It was about 220 or so. but if you do find out its the HDD you could always just go buy one and instal it yourself, I hear it not that hard to do acutally. Good luck!

Similar Messages

  • Help! Won't load past white screen!!

    I need help please! My curve won't load past the white loading blackberry screen. I downloaded an app from the app store and it crashed my phone.  I called my carriers tech support but they are backed up and it might be a days before they can get back to me.

    Jenn, If your BlackBerry stays powered off with a white or black screen, follow the instructions below. The only indication of life might be the blinking red LED light in the top corner. Nothing seems to wake it up and Desktop Manager doesn't recognize any device is connected.
    1) Make sure you have Blackberry Desktop Manager installed.
    http://na.blackberry.com/eng/services/desktop/
    2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
    "c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
    3) The Application Loader Wizard will appear -- click "Next."
    4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
    5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Just don't disconnect anything and let the lengthy process finish completely.
    NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
    http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
    Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Macbook won't boot past white screen

    My girlfirend's 2009 macbook aluminum unibody ((Leopard 10.5.x) is having a problem booting up. Initially I ran Onyx on it and it said it needed a disk repair. I ran a quick hardware test and it came back ok. I ran Disk Utility off of the cd and it said the repair failed. I believe the message was "invalid node, repair or verify failed." I tried it 3 times. When I went to quit disk utility and restart, it stayed on the white screen with the spinning wheel for a few minutes then the screen went blank. I tried to restart several times, always the same. I have tried resetting PRAM. I tried starting in Safe Mode but it wouldn't. I finally went to reinstall the OS but when it gets to the screen where I have to choose a drive, there is no drive in the screen to select. I don't have Disk Warrior, so can't try that. I'm thinking to remove the hard drive and get the data off of it onto my computer, then to erase her drive and start from scratch. Does anyone have another idea before I go through this?Thanks for the help.

    If your OS X installer disc is no longer usable then you can arrange to purchase a replacement by calling AppleCare Customer Service.
    Have you tried reformatting the hard drive? If may not require replacement unless the drive has truly failed.
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • NAND script and won't load past apple screen

    My I phone 5 has crashed won't load past apple screen and has a list of NAND scripts can anyone help or had this happen

    Standard troubleshooting...
    1. Remove apps from the Recently Used (multi-tasking) list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.
    2. Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    3. Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    4. Restore with your backup.
    5. Restore as new, i.e. without your backup. See how it runs with nothing synced to it.    You may need to try DFU mode (Google for it).
    6. If still a problem, it's likely a hardware issue.

  • MacBook won't go past startup screen

    My MacBook won't go past the startup screen.
    This happened after I tried reseting my battery because it was not being recognized since it was drained completely. After removing the battery and re-inserting it was still not being recognized. So the support website advised to try downloading the latest update. However, before downloading the last item, it showed a message saying that there had been an error in the download, to go ahead and erase the current download and try again. However, when i clicked "ok" on the error box, it automatically went to re-start and I have not been able to go past the gray screen with the apple...the waiting circle just keeps going round and round.
    I have tried to start it pressing the c key and the shift key but it did nothing. I then tried to start it with disk 1 and it does nothing either, plus the disk will not eject either.
    Please help!!! what should I do???
    Thank you so much for your time to help me with this.
    MacBook 1,1   Mac OS X (10.4.9)  

    To eject the disk, hold the trackpad button down as the machine restarts.
    Is your data backed up?

  • Iphone 4 won't load past logo screen

    While on vacation, my phone went black. I thought the phone had gotten too hot, so when I got back to our room, I plugged it into the charger and after a few minutes it said "activation required", then brought me to the "connect to itunes" screen. Of course, on vacation, I didn't bring my computer! So after a week gone without my phone, I am connecting it to itunes and it won't load past the silver apple logo screen and itunes won't recognize it!! Help!! Is my phone trash or can it be saved???

    My solution: I opened the phone, removed the battery, cleaned out the battery connector and reattached the battery. The phone turned back on and showed the low battery sign.  I had done this before and it didn't work. Apparently the problem was I hadn't properly connected them. You need to make sure it's locked on tight so when you close your phone slides on easily.

  • Satellite M40 won't load past BIOS screen

    when i turn my Satellite M40 on sadly it won't load past about 7/8ths of the blue bar going across the screen.
    this has left me completely baffled as what to do.
    apparently it could be repaired by removing the battery cables on my CMOS?
    would anyone know how i would go about doing this? or have any other ideas?
    thanks xx

    Hi Dec,
    The scrolling blue bars indicate that the Wondiows operating system is being loaded from the hard drive. If this process stalls during the load then it is likely that either the hard drive itself is defetive or the files which are being loaded are corrupt and cannot be loaded.
    Interfering with the CMOS chip will not correct this problem since the BIOS has already been loaded at this stage.
    If you have access to a bootable CD/DVD (such as Norton Disk Doctor) then I siggest you try booting from it and running a scan of your hard drive. Alternatively you could try re-installing your operating system from the Toshiba recovery CDs but this will over-write any of your own data on your hard drive.
    regards

  • MacBook won't load past the white startup screen.

    I'm going to start off by saying I'm a huge idiot.
    My MacBook was being sluggish last night, so I (impatiently) force-turned it off. Whenever I turn it back on, I get stuck at the white screen for about 10 minutes and the Apple logo never loads. I must've made the harddrive corrupt by turning it off while it was doing some important background work.
    Is there any way I can fix this? The data on there isn't important as I have my course work backed up, I just need it up and running for class tomorrow. Can I wipe the harddrive and do a clean install somehow?
    Hopefully someone can help.
    Edit: I managed to open Disc Utility with my Mac OS X 10.6 disc, and I can't even see my harddrive located anywhere.

    Sorry for the double post, but I can no longer edit the main one.
    I heard the most gut-wrenching sound when I held "Alt" to get to my partition, so I opened my MacBook up, removed the harddrive and reinserted it. I'm not sure if it was the harddrive that produced the noise, or the installation disc.
    Now I can see my Harddrive located in Disk Utility
    http://i.imgur.com/aQdBU.jpg
    http://i.imgur.com/qR38u.jpg
    After hitting Verify Disk I saw this:
    http://i.imgur.com/vhRIt.jpg
    So I hit repair and...
    http://i.imgur.com/eBLNH.jpg
    I try erase:
    http://i.imgur.com/Tp8bA.jpg
    And repair again:
    http://i.imgur.com/jrM3x.jpg
    I'm given so many errors, but they all point to the same conclusion...
    My Harddrive is fried and I need to look for a replacement. Could anyone point me in the right direction? My Macbook is really old I've even forgotten the type! It's a Black MacBook from around 2006 or 7 is my best guess. What harddrive would fit?

  • Macbook not loading past white screen. DU not finding HDD, works externaly

    Hello,
    My Macbook stopped working recently, it crashed, so I held down power button for it to turn on again.
    I did this the next morning and it just would not load past the white screen, I tried turning off and on again with no joy.
    I had the circle with a line through it at one point. I tried safe mode and reseting whist holding cmd S, then option cmd P R.
    I loaded with the disk in and Disk utility could not find the disk.
    I plugged the HDD into a USB adapter and the HDD works fine, I am using it to write this.
    What would stop the mac from loading the HDD and cause Disk utility to not find the disk?
    Macbook Pro 13.3" 2009. I recently put in 8GB RAM to replace the 4GB. Using Lion since it came out.
    Any help guys?
    Sorry if this problem has been posted else where already.

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • MacBook won't load past the gray apple screen, what do I do?

    A few months ago my cat peed on my computer and despite the battery no longer working the computer its self continued working fine after letting it sit a few days.
    A few weeks ago I accidentally unplugged it form the wall forcefully turning it off, when I tried to turn it back on it wouldn't go past the gray apple logo with the spinning pinwheel.
    I've tried to troubleshooting it numerous times but even after letting it safe boot all night I came to no avail.
    All the suggestions I've gotten on other sites say I sould re-install the OSX server, the problem being I don't know how, or which OSX I have, they also say the memory will probably be erased, I can't have this happen because I have many things I wrote on there that I have no where else. I bought this laptop in the first few days of 2009.
    What do I do without erasing the memory?

    Hello,
    Could someone help me, please? I apologize for the long message but I want to be as detailed as possible.
    My MacBook (purchased early 2006, white 13", upgraded to Leopard about a year ago with no problems until now) will not boot past the grey screen and spinning wheel.
    Here' are the list of 6 steps I've followed so far and still is not working. Oh, and I do not have any peripherals attached to my MacBook:
    1. Reboot in Safe Mode: tried pressing down the Shift key before the powering up sound AND after the sound. Could not get into Safe Mode. Did this several times, holding the Shift key for as much as a minute or two. Nothing but grey screen and spinning wheel.
    2. Reset NVRAM/PRAM: CMDR+POption: Computer restarted but still goes into Grey Screen, spinning wheel and stays there forever.
    3. CMD +S: I read this online. Gave me a black screen with a lot of information, but I don't know how to read the computer jargon, let alone know what to do with said info.
    4. Disk Utility Repair Disk : Inserted my Leopard install disk. Went to Utility Disk. Performed a Repair Disk and I did get two error messages, something related to id 70000452 should be id 70000450 ( I'm sorry to say I cannot remember the exact error messages). But it showed as repaired. When I did a 2nd Repair Disk, I got the message that the volume appears to be OK. Turned off and on again, nothing but grey screen and wheel.
    5. Disk Utility Repair Disk Permissions: got several error messages and this time some could not be repaired:
    -Permissions differ on system/library/CoreServices/Front Row.app/Contents.... should be -rw-rw-r-- , they are lrw-rw-r--
    I got this about 4 times.
    -Permissions differ on System/Library/PrivateFrameworks/DiskManagement.framework/Versions/a/Resources/ DiskManagementTool has been modified and will not be repaired.
    -Permissions differ on System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Resou rces/Locum has been modified and will not be repaired.
    -SIUD file has been modified and cannot be repaired also shows twice.
    I've read that these messages can be ignored. Is this true? I verified permissions after that, rebooted and still the same grey screen and wheel.
    6. FINALLY: I tried to hook a FireWire from my notebook to my sis, iMac, and see if my HD shows up on hers so I can try to copy and save my pics and music. I was then planning to Erase and Reinstall. But my HD doesn't show up. I turned off both Macs and turned on, pressing T on my Notebook so it acts as a drive, but nothing shows up on my sis iMac. What am I doing wrong here?
    And if it cannot be repaired, what do I do?
    I'm an amateur photographer and would like to save all my pics, as well as my iTunes music. Much of everything else is just docs, and I think I backed the docs up, but not iTunes or the pics lately (not enough memory available in my flash drive). It also means I do not have a lot of RAM available (I know, I should've bought an external hard drive :o) to perform an Archive and Install.
    Can I save my pics and music? Is it all lost? Help please?
    Thanks
    Andy

  • My Macbook Pro won't get past white screen....

    My Macbook Pro is stuck on the white screen with the gray apple logo and loading gear spinning below---for hours now. Restarted multiple time without any change. Agh!

    Boot in safe mode. First, disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable, and remove all aftermarket expansion cards. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal.
    If you can boot in safe mode, try rebooting as usual (i.e., not in safe mode.)

  • Macbook not loading past white screen with logo and spinnning wheel?

    ok, so basically i have a macbook 10.6.4 Snow Lepoard that is making me want to literally bash its brains out but, unfortunatly i cant because it is owened by the school...
    As mentioned in previous posts, my school It dept are incredibly slow and their idea of fixing something is to wipe everthing and reinstall all the programs once again. if that dosent work their other way of fixing something is to send it off to apple. for obveous reasons i want to avoid that.
    it ONLY started today, (last night i was happily doing last minuite homework) when its was lagging so much that i did the inevitable, i quit tetris and restarted my computer...
    This led to me sitting infront of a white screen and a spinning wheel for the whole lesson. The next lesson i got fed up with waiting and restarted. nothing. I have also notied that my macbook seems to heat up REALLY FAST toward the bottom of the screen (where is says macbook).
    Any suggestions?
    Thanks in advance,
    Favvi

    well i went to hand it in today but the fails that we call 'the qualified IT deptarment' (even though they are only two), decided to take the day off. they were supposed to be there recess and lunch but the room was pitch black.
    When you say that "you do not need admin rights to perform the different solution", i actually am the admin of the laptop but there is another hidden admin so that they can change any settings in the computer without our passwords.
    i have previously tried that whole command letter thing for various other things such as safe mode and starting from the disk and have had no sucess. i dont know if my timing is off or something but it never works. however, i have been able to retrive a disk from the disk drive by pressing the mouse button when it turns on.
    this is an exerpt from a previous post:
    favvi wrote:
    so im really starting to get annoyed now. I have tried that single user mode start up thing (command + s) after the chime, before the chime, hold it down for a second, hold it down forever BUT IT ALWAYS JUST GOES INTO MY LOGIN SCREEN!!! i cant seem to get around this. I cant get into the 'utilities' from my install disk because it asks for an admin name and password. i am literally tearing my hair out…
    Barney-15E:
    That doesn't make any sense. When it boots to the install disk, there is no user to authenticate.
    Does it have an Open Firmware password set?
    i assumed that this was set. but to be honest i have no freaking idea.
    also i was talking to a friend today and she said that she had the same issue and they had to replace the battery. although i have no idead on how the battery could be affecting this?

  • Macbook won't start past grey screen/apple; won't start OS disc

    I know this issue has probably been talked about a million times, but I still can't seem to find a working answer... and what better to make my first post than this problem?
    Anyway, I was streaming a movie online on my 13 inch black Macbook (OS: Leopard; Bought: 2007), when I suddenly had to leave... so I closed my computer and left.  A while later when I came back, the computer was off.  I tried to turn it on, but it only got to the grey screen with the Apple and spinning wheel, which I've let sit for upwards of an hour before giving up.  Anyway, I reset the PRAM, and of course even tried to start from the OS disc (Leaopard Disc, original OS dvd that came with it, and even a Snow Leopard disc), but the disc never loads.  I have rebooted while pressing Option, and the disc shows up but when I click on the arrow it just goes back to the grey screen/apple logo/spinning wheel for a while before I get frustrated and turn it off.
    Anyway, if anyone has any suggestions or can help me out I would be eternally grateful.  I don't want to have to take it to the Apple store (I'm a pretty broke college student), and I have backups of everything on my HD so reinstalling the OS is no issue to me.  I'm just willing to do whatever I can to get it working.  Thank you, and again sorry for probably repeating what millions have before me.

    Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
    Startup - Gray Screen
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • Macbook won't boot past grey screen with Apple logo and spinning wheel.

    For some reason, after about 1 year and 10 months of owning my Macbook, it decided this morning not to load past the grey screen with the Apple logo and spinning cog/wheel.
    I used it for a couple of hours beforehand, and it was working fine. Software Update prompted me of about about 4 or 5 updates; I can't remember exactly what was downloaded, but I think there was a Security Update and iTunes among them. I restarted, left it to install with no errors, but when I logged in, Safari and iTunes were running incredibly slowly. I also noticed that the volume keys weren't responding, as well as the power key to bring up the "Sleep, Restart, Shutdown, etc" dialog box. I forced shutdown, hoping a restart would solve my problem, and that's when my troubles started. I originally just left it, but after about an hour the wretched thing was still spinning.
    So far, I have done a number of troubleshooting tips on a variety of websites. I have tried taking the battery out and holding down power for 5 seconds, resetting the PRAM with option, cmd, p & r, and holding down power until the sleep light flashes rapidly and the computer lets out a large "BOOOP".
    I have booted off my Leopard install disk with both option and c, repaired the hard drive a number of times, with there being no errors whatsoever. I have tried repairing permissions, but everything seems to freeze up, except the mouse.
    For some reason my computer will not boot into safe mode, either, and holding cmd & s at startup doesn't get me to the stage where I can enter commands with the keyboard.
    Unfortunately, because of my puny 60GB hard drive, I only have 1GB of free space left and cannot reinstall Leopard without wiping my hard drive.
    I would greatly appreciate it if anyone could assist me with this unfortunate dilemma. It's such a shame that my computer has been fantastic for so long and now decides to play up. (Maybe it's just Apple trying to get me to buy a new 2.4Ghz aluminium Macbook sooner than I was planning...)
    Thanks very much.

    Hi ds,
    Sorry to hear you're having such trouble!
    Unfortunately, the best thing you can do at this point is reinstall Leopard (and then attempt to install the combo updater, too). If you don't have a backup of your machine, you could boot it into Target Disk Mode (by holding down T at startup) and then attach it via FireWire to another computer to salvage your files.
    I recently had to repair a machine with this exact same problem, and after messing around with that for several hours, I'd have to say that I think that an Erase and Install is the way to go. If you then migrate over your user data and start having troubles, you at least know where the problem lies. I suspect, though, that having a clean machine with all of the new updates applied will be the end of the issue.
    Sorry to be the bearer of bad news. There are a few other things you could try first; you could, for example, manually download the relevant combo updater from Apple's website and attempt to install it to your damaged machine while it's in Target Disk Mode. If you have a copy of Disk Warrior, that too is certainly worth a shot (and in some cases may be the saving grace). In my experience, though, a failure of this magnitude isn't easy to resolve.
    Hope that helps.
    —Hazy

  • IBook G4 won't boot past white screen gray apple.

    I'm having problems with my iBook G4 booting up. It won't get past the white screen with gray Apple and clock thing turning. I successfully hooked the iBook to my G4 tower via firewire and can get files off of it as well as run a series of TechTool Pro tests and repair procedures. However, I still have the same startup problem. It never gets past the white screen with gray apple. It's stuck there with the clock continually turning. Is there anything else I could try before getting everything off and wiping the drive clean and starting over? I don't know if it's a hardware or software issue at this point. Thanks for any help you could suggest.
    LW

    You should at the very least backup your Home folder from it before attempting this, but it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
    http://docs.info.apple.com/article.html?artnum=107120

Maybe you are looking for