Macbook won't read my EZquest firewire external hard drive.

I need this hard drive to back up stuff for school. I only have one firewire port in my Macbook. It's not reading it when I plug it in though. Not even on disk utility. What am I doing wrong? Thanks.

I have a similar problem. Bought an external drive to store music and pictures, followed the instructions on several threads here on how to transfer these from my D drive (the back up drive on the computer itself) to the L drive (the Buffalo Linkstation); changed the location of the library to the correct address where all the music files are (I can see them there) having consolidated them there. It could not find any of them unless I individually located them (there are over 9000 tracks so I have not got time to do that). I changed the location back to the original and it found them again. Next I tried following the thread on the .itl file - using shift and selecting the library on the L drive, but it only found 300 tracks, some bought, some transferred, some full albums, some only part of the album, an apparently random selection. I tried going back to the original .itl file and the same happened - it only found the same small selection of tracks. I know the files are still there - I can see them, but I have no idea how to connect itunes to them. Please help!

Similar Messages

My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2. USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head. The fastest speeds you can typically get are about 300 Mbps. Firewire, on the other hand, has very little overhead. The fastest speeds you can get are very nearly 800 Mbps. You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus. Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it.
Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance. A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
USB 2 will work perfectly fine... just not as fast.
Also... it's much safer to move the entire Aperture library than to "relocate masters". Your images must be managed. You can Aperture manage them, or you can manage them. But someone has to manage them. If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge. If you do, you'll break the links to your masters and start having problems with missing masters. If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.) There are only two kinds of hard drives in the world: (1) those that have failed and (2) those that are going to fail. There are no exceptions to this rule. Hard drives are cheap. Backup software is built into Aperture and into your Mac.

I just upgraded my operating system on my MacBook Air and now my laptop won't detect my Toshiba 1T external hard drive

I just upgraded my operating system on my MacBook Air and now my laptop won't detect my Toshiba 1T external hard drive, how to solve this problem?

Try some of the troubleshooting steps outlined below:
Troubleshooting an external hard drive
> Unplug the hard drive, wait a few seconds, and then plug it back in
> Restart the computer
> Unplug any other peripherals from the computer
> Plug it into a different USB port
If none of those steps work, see if it is recognized in Disk Utility.
Checking a disk with Disk Utility
To check a disk using Disk Utility, launch the Disk Utility application in any of the following ways:
> Type the first few letters of its name into Spotlight. Select it from the results.
> Go Launchpad > Utilities > Disk Utility
> Go Applications > Utilities > Disk Utility
Once Disk Utility is opened, check to see if your external HD appears on the sidebar. If it doesn't appear at first, try the troubleshooting steps above again while leaving Disk Utility open, each time checking to see if the external HD appears.
Austin

My macbook won't copying anything to any external hard disk drivers same time can copying to any flash memory

my macbook won't copying anything to any external hard disk drivers same time can copying to any flash memory
my macbook with ratina display the newest virsion

my macbook won't copying anything to any external hard disk drivers same time can copying to any flash memory
my macbook with ratina display the newest virsion

FireWire External Hard Drive Workaround

Scenario:
1.) AirPort Extreme connected to Mac Mini via ethernet.
2.) Mac Mini connected to a FireWire External Hard Drive.
3.) MacBook Pro connected to AirPort Extreme via 802.11n (wireless).
4.) AirPort Utility is administered from the MacBook Pro.
Problem:
Considering that the AirPort Extreme does not support a FireWire External Hard Drive, I was hoping to find a work around. Is there any way to indirectly access the FireWire External Hard Drive connected to my Mac Mini from my AirPort Utility administered from my MacBook Pro? Essentially I want to access files from the External Hard Drive on my MacBook Pro without being physically tethered to my Mac Mini or the External Hard Drive. That is, I would like to define the External Hard Drive as an Airport Disk in Airport Utility so I can utilize the Back To My Mac feature.
Solution:
Your solution goes here...

That is, I would like to define the External Hard Drive as an Airport Disk in Airport Utility so I can utilize the Back To My Mac feature.
No that won't work.
If your Mac mini simply has File Sharing enabled you can get to the drive using Back To My Mac with no involvement of the AirPort Extreme base station (AEBS).

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. i have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done?

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. I have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done? or is it possible?

As I said, I don't use Time Machine, so it'd be best to wait for an "expert" answer, but, with my very limited knowledge, I'd say: probably not - so, for now, I'd suggest you read up on Time Machine:
http://web.me.com/pondini/Time_Machine/Home.html
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=time%20machine
And, you might be attracting more knowledgeable answers if you were to post this question in the Time Machine Forum (part of the Snow Leopard forums).

After I installed Lion, my MacBook Pro can no longer detect my external hard drives or my USB flash drives. What should I do?

After I installed Lion, my MacBook Pro can no longer detect my external hard drives or my USB flash drives. What should I do?

And me -- My Mac at work running Snow Leopard reads the drive normally. My home Mac (on Lion) can't even find it....
Yet another Leo let-down.....

My MacBook Pro no longer "sees" my LACie external hard drive

Hello,
I need you help with this one. My MacBook Pro no longer "sees" my LACie external hard drive. In the System Profiler (under FireWire) the drive is listed as:
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
Unknown Device:
Manufacturer: Unknown
Model: Unknown
Maximum Speed: Up to 800 Mb/sec
Connection Speed: Unknown
Can anyone help me to correct this issue? Thank you in advance for your help!!
Nat

I was finally able to resolve this issue. I went to LaCie's site and went to the support area to find troubleshooting steps for my particular drive. It turns out that the problem was corrected when I swapped the power supply cord of the "troubled" drive with another LaCie drive that I have and that seemed to resolve the problem. Thank you Tony for your help. I appreciate you guys!
Thanks,
Nat

Connect macbook pro to macbook air as if it were an external hard drive?

can i connect my macbook pro to my macbook air as if it were an external hard drive?
i tried using migration assistant, which will work, but i want to look through my stuff as if it were an available external harddrive, then click and drag stuff onto my new computer.

If you are using Ethernet to connect the two computers, then enable File Sharing on the MBP. Select the MBP's Desktop drive icon. Press COMMAND-I to open the Get Info window, check the box labeled "Shared Folder." You should then be able to mount the MBP's shared drive on the MBA's Desktop and browse to your heart's content.

New Firewire external hard drive freezes

I have an external USB hard drive, and it works fine if I test it by copying and pasting 10 .jpg files (total ~ 2Meg) to the external USB hard drive from the internal hard drive. I got a new external firewire hard drive and if I try the same test, it freezes mid-copy. (It just sits there forever and I actually have to power down to get it to un-freeze).
It's a brand new Acomdata 250GB firewire external hard drive.
What could be wrong?
Thanks!

Welcome to Apple Discussions!
I'd return the drive. Get a drive from
Otherworld Computing
Granite Digital (they make cases to go around internal drives)
LaCie
Cooldrives
These are the only ones I know to reliably work under Mac OS X 10.3 or higher.
See my FAQ:
http://www.macmaps.com/firewirebug2.html
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

I want to keep my music on my macbook pro and my movies on my external hard drive.

I want to keep my music on my macbook pro and my movies on my external hard drive how do i get itunes to recogonise my external hard drive.? so i can drag more movies across later. i am able to plug my external into my Apple Express to stream to my apple TV arent i..???

michols wrote:
I want to keep my music on my macbook pro and my movies on my external hard drive how do i get itunes to recogonise my external hard drive.?
iTunes > preferences > advanced.
point iTunes media folder location to the external
on the same tab, ensure the copy files ... when adding option is checkmarked
okay out of preferences
highlight the content to be moved (i.e. the movies) in iTunes and right-click
select consolidate files from the pop-up menu
wait for the process to finish
when done, you may delete the original files from your boot drive. you may also want to point iTunes media folder location back to your local iTunes folder.
i am able to plug my external into my Apple Express to stream to my apple TV arent i..???
no. airport express does not support the airdisk feature. you'd need an airport extreme (or time capsule) for that.

Firewire external hard drives no longer mount

I had 2 firewire external hard drives connected, not always at the same time and not running all the time. Suddenly they won't mount. I have run System Profiler and it shows "No information Found". The drives themselves mount on my other Mac laptop.
An external DVD writer, when mounted, shows up in profiler though not on the desktop. I have set the finder preferences to -show all mounted drives. System profiler lists all my USB devices. It's just the 2 Firewire hard drives that show no information found. The DVD writer works in either Firewire port.The hard drives are each made by a different manufacturer.
I have re-started with everything off. I have hot swapped.
Help-I need these drives to store photo files and print publications.
Fairview
iMac Mac OS X (10.3.9) G4
iMac Mac OS X (10.3.9) G4

fairview:
The next step is to see if it is directory related and Repair Disk:
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
Good luck.
cornelius

HT5149 Final Cut Pro x won't recognise any of my external hard drives

Hi, I am sorry to start a new thread on this topic as I am aware there are already numerous threads. I have been searching through them for a solution to my problem and nothing appears to be working.
As stated in the title, Final cut X won't recognise any of my external hard drives. When I open Final cut x all I see is an "Untitled" event in the library and not even a mention of my internal drive.
I have checked that all my hard drives are formatted to Mac OS Extended (Journaled) which I can confirm they all are. I have a spare hard drive which currently has no content on it and I have just reformatted it using disk utility to Mac OS Extended (Journaled). This hard drive is not showing up in the library either. I mention this as some of the suggested solutions appear to be that an external hard drive not showing up might be because of folders within the hard drive labeled something such as "Video" "Audio" or "DCIM," as this may cause Final cut x to see it as a camera device and not a hard drive. This hard drive has absolutely nothing on it and has been reformatted just 10 minutes ago, yet it still does not show up in my final cut x library. The weird thing is... all the hard drives show up in Motion 5.
I am really stuck and I don't know what to do. I am currently in the process of re-installing final cut x to see if that will change anything. I will post what happens as soon as it has been reinstalled. I can provide screenshots as soon as it has been reinstalled.
Does anyone have a solution to this? Has anyone had the same problem and found out what I must be doing wrong? I would greatly appreciate any comments or feedback which might provide some insight into what I am doing wrong. I feel like this must be an error on my part as I am not that adept at using final cut x.
Thanks,
Chris

I am using the latest version. Currently re-installing final cut x which will bring me up to date.
Thank you for taking the time to reply. That makes a lot of sense.
However I still can't understand something... I only have 100gb free on my internal drive and I want to optimize a large amount of footage for my video projects. How do I save my projects to this hard drive if it is not showing up in my library?
I appreciate I am probably being very stupid and am very grateful of any insight!
Thanks,
Chris

Editing using a firewire external hard drive and a NTSC television monitor

I have Final Cut Express 2 and use it with a firewire external hard drive and a NTSC television monitor.
I have started to use iMovie with this same set up. I save my iMovie projects to an external hard drive and also have my miniDV deck connected via firewire with the composite outputs going into a 27 inch television so that I can get a better idea of what my colors and title safe framing, etc. look like.
I have had some minor problems with this set up. Like stuttering video, audio tracks playing back when thay are "unchecked" and the "unexpectedly quit" deal.
Thanks in advance!!!
Frank

iM uses a lot of harddrive space on the "start up"/internal disk, even when the project itself is located on some external drive.. make sure, you have at last 10 - 15GB free...
.. and the goo' ol' stutter-problem, in detail discribed by Mastermind Karl Petersen: Stutter in iM5/6, causes and workarounds <<click

My MacBook Pro won't let me mount my external Hard Drive. Just trying to restore my iTunes library.

My MacBook Pro, less than a year old, started acting weird. I backed everything up, took it in to Best Buy, who sent it out to Apple Repair and they put in a new motherboard.
It's running on Mac OS X Version 10.7.4
Now I am trying to put everything back on the computer from my external Maxtor 80GB Hard Drive. MacBook Pro won't recognize the external drive.
I tried Disk Utility. I can see the external drive, and did a repair disk and verify disk. Several times. Each time it says "This partition map seems to be ok."
However, I am not able to mount it, as that option is greyed out and i can't select it.
Also, under the Icon for the external hard drive, it has the Macintosh HD Icon (essentially my computer). I tried to restore this way, didn't work.
I need this to mount, as it has all of my itunes stuff on it; dozens of my sons movies, and my entire iTunes library.
PLEASE HEEEEELP!! HOW CAN I MOUNT THIS EXTERNAL HARD DRIVE? Thank you in advance

Try things in this USB/Firewire faq.
DALE

Macbook won't read my EZquest firewire external hard drive.

Similar Messages

Maybe you are looking for