Macbook won't start up, no chime, nothing even with a full battery

I can plug it in, it'll charge, but when i press the power button, nothing shows up on the screen and the only thing that tells me it's on is the fact the light on the bottom right lights up and stays lit. It will accept a disk when it's turned on, but it won't spit it out.
It's a Core solo, so it's one of the first ones so it's got a few years on it. I've done all the steps leading up to "take it in, dummy" but since I won't be able to do that until tomorrow, I'm brainstorming what it could be.

Did you try holding the power button down for 5 seconds with the battery and the AC power both removed?
Message was edited by: Gregory Mcintire

Similar Messages

Macbook won't start - apple icon turns to circle with diagonal line/slash

My Macbook won't start. When I turn on the power, the apple icon appears but then after a while it changes to a circle with a diagonal line/slash, then it just shows a gray screen.
The last time I used the computer I did several software updates. Could this be causing the problem? Any suggestions for getting my computer operating again?
Thanks for any help/advice.

Yup, i encountered the same experience after a strange failed USB-loading, and a sudden shutdown of my macbook.
Luckily i manage to "safe-boot" (pressing "Shift" key once starting up the mac) my macbook so that i can save the necessary files before will lose them all.
After that i popped-in my SL Installation DVD, and did the reinstallation process. Fortunately, everything works as charm and everything is back to normal after Spotlight has done it's hard work.
Happy Apple user once again.

My MacBook won't start up. Get folder icon with ? In it. Ideas.... Thanks

My MacBook won't start up. I get a folder icon with a "?" in it. Any ideas? Thanks.

The MacBook cannot find a startup disk...could be a corrupted hard drive or failed hard drive. If you have the install disk for your Mac OS X, you show 10.5.8, try booting holding the C key so you startup on the installation disk. If that works, use disk utility to see if you can do a repair of the internal hard drive and fix system files that are bad, or even do a reinstall so you cleanup bad files.
If that does not work, then a trip to the Apple store genius bar to have the hard drive checked out and possibly replaced.

Macbook won't start or charge unless I disconnect and reconnect the battery connector each time .

I have a late 2011 model Macbook Pro, 10.7.5 OS and I've had no issues whatsoever up until a week ago. The night before if stopped working I did everything as usual, did some HW, emailing then I shut it down. I woke up the next morning and it wouldn't turn on so I figured it was dead, so I got my charger plugged it in and got no light, green or orange. What I got was a faint green blinking on the charger light and my battery level indicator wasn't working. I thought it was my charger but it wasn't because worked fine on my girlfriend's Macbook.
I googled and tried PRAM and SMC to no avail. When I tried the SMC I didn't take the battery out I just disconnected the connector (Don't know if it makes a difference) and Voila it worked and I thought I fixed the problem. I turned it off and the next day the same thing, I have to disconnect and reconnect the battery connector each time for it work. Other than this issue I have no problems, mac runs fine while it's on and I shut it down or restart it for awhile after I reconnected the battery but if I try to turn it back on or restart it hours after I've done that then it won't work . One thing I may add is after I reconnect and plug my charger in, the light is green for about 5 seconds (even though it's not fully charged) then turns orange .
I'm guessing I need a new battery or logic board , but I'll keep my fingers crossed .
I won't be able to set up an appointment until next week but I would like to see if I could get any help here in in the meanwhile.
Thanks !

Hi, I dont know if this may be the cause as i too have the same problem. But it only occurs after i disconnect my Iphone from my macbook pro.
The Macbook has worked perfectly and then all of a sudden last week it started to shut down after i would disconnect my Iphone 5.
The mac wouldn't restart, charge or anything.
I tried all the trouble shooting reccommended, Shift Alt command button combinations. ( there were a fair few ) None worked.
Then i found out about disconnecting the connector.
This fixed the problem.
But alas, It done it again after my next sync.
This has done it 4 times now. And only when i disconnect the iphone after using itunes on the mac. I done it all correctly 3 times and the 4th time i just pulled it out with out ejecting from itunes, but still done it.
The iphone Syncs perfectly. I get everything i want onto the iphone. But for some reason as soon as the cord is disconnected from the mac BOOM. Dead mac.
If i leave the cord and the phone plugged in but still eject the phone it doesnt shutdown tho.
I found if i shutdown the macbook, then disconnect the iphone cord once the mac is completely shut down then my mac will start back up again with no problems.
As i said i dont know if this is the cause of your problem and if it will help you or not? But if not, maybe it will help someone else out who finds your post?
Hope you get your problem sorted
Chris

After 10.4.11 upgrade Macbook won't start can't boot from external HD

Hi guys,
I just suffer as all other that after try ti install the 10.4.11 update my macbook won't start, I have a external HD with a image of my macbook but went I press and hold the option key I only see the bootcamp parttion and my internal HD, I don't see the external HD.
How can I boot from my external HD if I have a bootcamp partition?
Thanks

I follow the robotobi post and solve this issue.
Thanks robotobi

MacBook Pro won't start up after chime, MacBook Pro won't start up after chime

MacBook Pro won't start up after chime, MacBook Pro won't start up after chime

Try resetting the SMC.
Barry

Macbook won't start

Macbook won't start up. Sounds like disc drive is spinning but screen remains dark as though startup file is not booting.

Did you also try reset of NVRAM/PRAM?
http://support.apple.com/kb/HT1379
When you tried the Command + Opt + P + R keys on restart, held almost
immediately and through the time period it should chime on startup, did
you keep holding those keys down, so as to force it to repeat the chime?
You should do this (if possible to tell) through Three chimes, before you
let those keys go; that would be indicative of a NVRAM/PRAM reset.
Aside from the details and troubleshooting processes in the SMC reset
article from Apple Support, that could shed some light on the issue, if
these were done in their subscribed order before finally trying the SMC.
Have you tried System Management Controller (SMC) reset more than once?
http://support.apple.com/kb/HT3964 {and those other troubleshooting bits}
Depending on which MacBook you have, the details may vary; with some
you could try several items not possible with a later model, such as a hard
reset of the computer (remove battery, hold power button, etc) and other
details I am not going into now... Here's something that worked for this one:
•My MacBook won't boot, no start chime, just DVD spinning sound:
http://www.ifixit.com/Answers/View/6271/My+MacBook+won%27t+boot,+no+start+chime, +just+the+DVD+spinning+sound.
There are some ideas there which may help. At least as far as trouble-
shooting. If you have access to an Apple Store with Genius Bar in the
USA or Canada, you could call ahead for an appointment to have one
of their staff genius tech persons diagnose and troubleshoot this issue.
In other locations, there may be fees charged to accommodate services.
Anyway, I an not certain what to suggest next.
Did you try booting from the Snow Leopard DVD?
Good luck & happy computing!

After installing latest update Macbook won't start up.

After installing the latest update my macbook won't start up. Instead of the login screen I get a flashing map icon with a question mark. My uncle says that means it can't find the startup disk and I had to startup from the install disk holding C but it didn't work. I'm quite desperate because I need my macbook for school (writing & producing music). I type this on a friend's computer... How can I fix this? Or do I really have to go to a mac store and part from my macbook for an unknown time...? :'(
I don't exactly know what version I have (can't check it now either) but it's at least 10.6.something and I always install the updates...

Hi
Anything unusual happen during the 10.5.3 update installation phase?
What type of iMac are you using? Your tag says G5 but also Intel core processors - it can't be both.
Try this:
-First unplug your computer and wait 10 minutes
-Next, simultaneously reinsert the power cord while pressing the power button for 5 seconds then release
-Press the power button again to start the computer - this resets the computer's system management unit (SMU) which controls your machines power functions.
-Next, press/hold down the P/R/option/command keys for 3 Apple chimes. This clears the machine's PRAM. After the 3rd chime release those keys and immediately hold down the Shift key to put the machine into Safe User Mode
-If you get to a log-in screen (may take several minutes as repair functions are occurring on the boot), log-in. When the login is complete, restart the computer as usual.
If no go, I suggest taking the machine to a certified Apple tech, or if you live near an Apple store to the Genius Bar.
Post back
Message was edited by: Hawaiian_Starman

MacBook won't start at all - dead

My MacBook won't start AT ALL - nothing, nada, zip.
I press the power button and nothing happens at all - no sound, no lights, no movement.
I have tried taking out battery and unplugging it, then pressing power button for 5 seconds, then inserting battery and plugging back in (as per Apple's kb note). This doesn't help.
[OK I was trying to upgrade the hard drive - original hard drive is now back in the MacBook]
Any ideas?

OK I took my MacBook to the guys at Streetwise in Glenferrie Road, Hawthorn (we are talking Melbourne Australia here).
Incredibly helpful - the genius there diagnosed a dislodged cable between the top board (keyboard and housing) and the main body. He thought I had dislodged it trying to change over the hard drive.
In any case, he straightened things out, reseated the cable and voila, its all working.
Hard drive upgraded too using Carbon Copy Cloner.

MacBook won't start on battery/shuts down when power adapter is removed

Help & advice needed please.
My MacBook won't start without external power, it gives a whir then a click then nothing. Once started up, if I remove the external power it just shuts off.
The battery shows at 98% & charging. Coconut Battery shows the following:
Current battery charge 4126 (& increasing as I type)
Maximum battery charge 4200
Current battery capacity 4200
Original battery capacity 5200
80%
Battery loadcycles 111
Age of your Mac 6 months
Charger connected yes
Battery is charging yes
Does anyone have a clue why the Mac won't power itself on the battery when everything else seems like it works?
Cheers!

As of today, my MacBook and I have been together for 40 days. Yesterday, while I was happily surfing (on battery), it powered down with no warning. Okay, these things happen. I plugged it in, restarted, and all seemed to be fine. Battery was about 70%. I did other things on my other machines and when it was about 90%, unplugged it and everything was good. This morning after using it unplugged for 1.5 hours it did the same thing, but decided to only work with the power adapter, not on battery alone. When trying to boot without AC, it would try to spin the CD and then fall back into off. When on AC, if I pulled the adapter, it would last two seconds and go blank. I made an appt. with the Apple store (Fashion Show Mall, Las Vegas) for 3:20pm. I got there right at 3:20pm and the monitors showed I was 5th in line. Store was fairly packed, at least one patron at every display item. Monitors also said the next MacGenius appt. was "approx. 8:30pm." Glad I made an appt! I was served about 15 min. later, during which time the monitors had changed to "No more MacGenius appts. available today, please try tomorrow." However, one guy came by without an appt. and was told he would be put on standby and to come back in 30 min.
Once I explained my issue with my MacBook battery, my Genius tried one of his batteries. "I just want to make sure it's your battery and not your motherboard." My machine worked fine, so he said "No problem, I'll have you out of here in 10 minutes." He got me a brand new battery, tested it, and put my old one in a box on the rear counter with four others. He pulled the serial number from the "About this Mac" area, didn't need my receipt for purchase date or anything. I had even printed this page: http://www.apple.com/support/macbook_macbookpro/batteryupdate/ to use as ammunition, but didn't need it. He did approve highly of my dashboard widget "iStat pro", available here: http://islayer.com/.
So the battery issue is a very common problem, and one that Apple has tried to deal with as painlessly as possible for the consumer. My Genius did ask if the battery showed an "X" in the icon bar, and I said no. Just wouldn't run on battery. On the way out of the store, one of the 3 MacBooks, in fact the one closest to the door, had an "X" on the battery icon. When I unplugged the power, it shut down immediately! The moral of the story is to contact Apple immediately with problems and give them a chance to fix them. Hope this helps others.

MacBook won't start up (mainboard)

Hi to everybody!
My MacBook won't start up anymore.
I know since several week that the mainboard has problems: when I pressed on the bottem around the battery, it restarted randomly.
I didn't send it in yet because I needed it and could live with this flaw.
But now it doesn't start again. I just hear one single click from the disc-drive and then nothing happens. I'd just need to reboot it ONCE to backuo my data before sending it in.
Do you have any ideas how I could make it work?
Thanks,
Bensch

You will need another mac to do this, but if you follow this article it will show you how to mount your drive as an external harddrive on another computer.
Or else you could just remove your harddrive.
but give this a try first.
http://docs.info.apple.com/article.html?artnum=58583

Macbook won't start, just a flashing folder w/ "?" appears

macbook won't start, just a flashing folder w/ "?" appears
this happens after it hanged-up and I turned off the power

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Macbook won't start up while firewire audio interface is plugged up

I have a m-audio firewire solo and a presonus firebox, both firewire interfaces. My macbook won't start up when either is plugged up. If I restart with it plugged up I just get a grey screen. When I disconnect it I boot up fine. Is this normal or is something wrong here?

Wire Bus:
Maximum Speed: Up to 400 Mb/sec
FW Solo:
Manufacturer: M-Audio
Model: 0x10062
GUID: 0xD6C0B007E03B7
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
FW Solo Unit:
Unit Software Version: 0x10001
Unit Spec ID: 0xA02D

My MacBook won't start up. After turn it on I get a grey screen with an apple in center and a circle below with lines around it and a blank bar below that. How can I get it to get beyond this screen?

MacBook won't start. After I power up, I get a light grey screen with an apple in the middle, a circle with lines moving around it and a blank grey bar below that. It won,t get beyond this. Please offer suggestions.

I have the exact same problem and waited it out and got to my homescreen. Whateve the problem is fried my bluetooth and my trackpad. I tried starting it again and couldn't even get to homescreen, it stayed on the bluescreen with the wheel of death. So, I took it to genius bar today. I was informed that my logic board is fried and it needs to be replaced. $300 repair that I'm looking at...

How do I backup all my files if my Macbook won't start up?

So a few days ago, my dad and I got into a fight - he reacted by pouring coffee all over my macbook, then continuously slammed it on the floor. There wasn't really much I could do for my macbook then, except the basic procedure of powering it off, turning it upside down, then waiting for a couple of days to use it. Luckily enough, my macbook was able to turn on, but it got stuck on the logo screen and couldn't go any further than that.
I had already planned to diagnose my macbook after an earlier water spill, and spent over $500 on tools/replacements. I bought an external hard drive to backup my computer files with before diagnosing it - but now I can't really do that since my macbook won't start up. Is there any way I can boot it up just to back up my files before they get lost forever?

yes, the HD contains all you data, SEE PIC BELOW of macbook
Do you have 2 HD in your macbook? Some macbooks are modified and have removed DVD/Superdrives and contain a second hard drive (if you didnt do that, it isnt in there)
The HD itself is sealed, however the internal armature and heads are fragile, these are like records and needle.
obviously torturing these HD heads is like shaking an old record player with its needle and arm (bad idea)
The HD is like a metal sealed box (in simple explanation)....which is GOOD.....since liquid doesnt get in there...
what is BAD is what is inside that box is fragile
also what is bad is that the underside of that "BOX" contains a control board which CAN get ruined by nasty liquids.
if this was also possible to do with the hard drive.
No, dont think of putting any liquid ON / IN the HD, ..as said the HD is sealed, but it does have a circuit board on it (controller board) you cant see in this pic above,.....nasty liquid on it can of course fry the ability to access the data ON the HD platters inside......data recovery experts can get around this,....so can I, but its costly and very "painful" to do.
see picture of that control board here> http://www.irisvista.com/tech/laptops/Toshiba-Portege-R500/small/remove-hard-dri ve-10sm.jpg
inside of a HD:

Macbook won't start up, no chime, nothing even with a full battery

Similar Messages

Maybe you are looking for