MacBook won't turn on even though fully charged

i have a 13inch MacBook pro that I bought in September 2011. It has been on my desk for a couple of days whilst I was away and when I came to turn it on it wouldn't. I have fully charged it (the lights on the side say so anyway) and the charger seems to be working. the sleep light at the front is flashing once every now and then, I've also tried a different plug adapter for my charger and tried a few different sockets in my house.
Any help or suggestions would be great! I rely on my MacBook to do my illustrations so it's important! Thanks

So did resetting the SMC as griff w suggested help?
"the sleep light at the front is flashing once every now and then"
That's probably an SMC issue. Try forcing it to shut down. Hold the power button down for 15 seconds until you hear the computer shut down. Then reset SMC and restart.

Similar Messages

  • IPad Air won't turn on even after fully charging overnight and won't reset using the power and home button.

    I have tried charging the ipad over night and no matter what I do it won't turn on. I did try plugging it into my computer and itunes recognized it once, but I wasn't able to restore it. Please help. It's only 3 months past warranty.

    If you have owned the device, as in purchased from Apple, less than a year then there will be no charge to repair, or most likely, replace the device. If you have had the device more than a year you will be charged an out of warranty cost for replacement ($219 I think) and that is much cheaper than a new device. If you have Applecare+ then you have an additional year of coverage and the replacement will be $49 or $79 depending on when you got the Applecare.

  • This morning, my macbook pro won't turn on even though the battery is charged and power cord is working. it worked fine last night. what can i do?

    This morning, my macbook pro laptop won't turn on even though the battery is charged and power cord is working. it worked fine last night. what can i do?

    Try the suggestions in this support article:
    http://support.apple.com/kb/TS1367
    Ciao.

  • How do i turn off iTunes match, it won't turn off even though it says it's off?

    how do i turn off iTunes match, it won't turn off even though it says it's off?

    On what device and why, exactly, do you think iTunes Match is not turned off?

  • My iPhone4 won't turn on even after being charged for 1 hour and when I plug it into my computer nothing happens

    My iPhone4 won't turn on even after being charged for 1 hour and when I plug it into my computer nothing happens. PLEASE HELP

    I have a similar (if not the exact same) problem! Here are some more details if they are helpful.
    My iPhone 4 died earlier today and will not turn back on. It seemed that the battery died while it was not in use. I attempted to charge it on one charging cord in multiple wall outlets and none worked. Assuming it was a malfunction in the cord, I took my phone home to try charging it there.
    Again, I attempted charging it in multiple outlets with a different cord than previously used. None of these seemed to work, though they would flash the Connect to Power screen for a brief moment before returning to a black screen. I assumed that my phone was simply so depleted of battery that it needed a long charge.
    I charged it for 30+ minutes without any success, then attempted to charge it through my MacBook instead of through a wall outlet. iTunes did not even recognize that my phone plugged in (and still hasn't). I've attempted charging it for an extended period of time (1+ hour) with no luck. Sometimes when I press the Power button it will flash the Connect to Power screen once more before returning to black.
    The Apple logo never appears, nor does any apparent progress on charging. I have attempted holding down the Power and Home buttons simultaneously for 10 - 30 second increments. Still no luck. There is no reason anything should be happening with this phone that I can identify.
    I have no warranty and just recently replaced my previous phone which had had similar problems before completely crashing. This is a phone new to me that was previously used but in almost new conditions and factory reset by Apple prior to my purchase.
    Does this mean that my phone battery is dead?
    Is there anything else I can do??

  • My MacBook pro won't turn on, even though it's fully charged. I can hear a disk chime but nothing on the display. Help?

    I'm having an issue with turning my MacBook pro on. It's fully charged and when I press the power button I hear a disk chime but nothing happens on the display. Can anyone help please?

    Tried connecting the cable?  Still won't start?
    If you are still under warranty and/or have AC, call them & let them deal w/it.
    OOW:  Take the MBP to your local AS or an AASP.  Diagnostic testing is FREE!
    http://support.apple.com/kb/TS1365 Intel-Based Apple Portables: Troubleshooting a computer that will not power on

  • My Macbook Pro won't turn on even though the batt seems fully charged?

    My Macbook seems fully charged but nothing happens when I press the on button. All the lights on the battery are illuminated...
    Any help would be appreciated!
    Cheers,
    ET

    Try the suggestions in this support article:
    http://support.apple.com/kb/TS1367
    Ciao.

  • Vision M - 30 GB, won't turn on even though it's fully char

    When I hook up my mp3 player to my pc via usb it tells me that the battery is really low (red single line in bar is displayed on the top right hand side), I had it connect for a half hour and there was no change in charge status.
    Thinking it may have been the wire or something I tried the wall charger. When I hooked it up to the wall charger the player indicates that it's fully charged (full green bar with an icon in the middle of the green).
    So I'm not sure what the deal is... but now it won't turn on. When I try there is a quick flash of blue where the switch is but other than that no activity from my Vision M.
    Help please?

    hello to everyone, i seem to have a similar problem.. - bought my zen vision: m 5 months ago- used it for 4 months perfectly- then havent touched it for a month- when i took it back, the battery was empty, so tried to charge it all day long throuh my pc with a usb cable- it blinked all day long blue, and the batter icon indicated a blinking flash which meant it was being charged- but somehow the battery icon always stood red, and immediatley went off when i detached it from the cable- is the battery dead is it so cheap what can i do, please help me best regards, goktug / t rkiye / istanbul

  • My screen won't turn on even though i recieve calls, can charge it...

    It seems kinda weird but things happened this way:
    I bought my iphone5c 3 days ago and everything seemed right. Today I was playing some ****** game on it when i suddenly decided to lock it and keep it in my pocket since i was in school. I did. When i tried using it again, the screen won't turn on. The thing is: everytime I try changing it from loud to silent and viceversa, it does vibrate. I called my number from another phone and it does ring and vibrate, but the screen won't turn on. I connected it to the computer and to the charger, and both make that little sound when they're connected to something. The screen didn't turn on in any of those actions...
    As i told you, my phone is 3 days old. Hasn't been ever hit, exposed to water or anything like that...
    What the **** can I do? I feel kinda betrayed with Apple, since i bought this device 3 days ago.
    Someone help me !!!

    i have tried this and nothing happens. did my phone turn into a brick in my hand this morning? it was working fine and the screen turned funny colors and faded to black and havent got anything but a apple logo once since. i have tried everything i could find on the support site to no avail. i did get a screen with a picture of a cord, and arrow to the itunes logo. but it will not connect to itunes. please help!!

  • My MacBook Pro won't turn on and is fully charged

    I watched a Dvd this morning on my Mac book pro it was plugged in and fully charged when I shut it down. I unplugged it and put it up. When I got home it will not turn on. It shows green light (for fully charged) but nothing when you touch the power switch. Any advice?

    Steps 6 and 8
    http://support.apple.com/kb/TS1365
    Hope this helps.

  • My iMac won't turn on, even though it turned on at the store...

    I have a 24" iMac (white), that I bought around 2008. I haven't had any issues with it until recently. It's been really finnicky. At times it would just not turn on, and after waiting patiently for a day or so, it would then turn on. Being too busy to take it in, I ignored the issue. This was a few months ago.
    I recently moved, and I tried to turn it on and it wouldn't. I ignored it for a week and it still wouldn't turn on. I had my brother take it in to see what was wrong and it apparently turned on at the store. I was told that there was nothing actually damaged and it's probably due to me leaving it on sleep mode for extended periods of time and that if it happens again to just leave it unplugged for 24hrs and then try again.
    A week later, my brother brought it back and I had it set back up and yet, IT STILL WON'T TURN ON.
    It hasn't left the box since it left the Apple store.
    I know nothing is wrong with the outlet, because I've plugged other things into it without issue.
    Any ideas?

    Reset the SMC:
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    If that doesn't do anything, you can reset the PRAM, however, that really shouldn't affect power on:
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Display won't turn on even though my Macbook Pro detects the display

    I've had a long running issue with this but now rather than intermittantly, it just won't work at all. I have a 17" Mackbook Pro running Lion and an older style aluminium 23-24" cinema display (the boxy one). The problem also exited under snow leopard. I used to arrive home, pull my MBP out of my bag, place it on a stand, plug the power, USB for my keyboard and mouse and display cable (inculing the USB and firewire) and hit the keyboard and my display turned on and off I went. But now when I try to do that, I get the light on the display flash once and then the display appears to be dead. I'll go into detect displays and it's there and detected but I can't for the life of me figure out why I get no response from my monitor other than one flash from the little power light. Anyone know how I can fix this? Is there a fix or is it a hardware problem? I've zapped the PRAM and done an SMC reset. No dice.

    This is a long-standing problem we've all been waiting on a fix from.  I was rooting for the EFI update this morning to fix it, but no love.
    I have a MBP 15" early 2011, with a 27" Cinema Display (the last pre-Thunderbolt one)... and periodically, when returning from somewhere and plugging the Mac back in, it acts like it's seeing the monitor, but just doesn't display.
    I've found, after a year of this, that the following all helps:
    1) leaving nothing else plugged in while first plugging in the display.  Don't hook up the power or USB, don't have anything plugged into the USB hub on the back of the monitor, or it won't ever detect.
    2) Just keep trying... leave the MBP open, plug in the display port and nothing else... if the big monitor doesn't turn on, but the MBP display flips to "I'm an extra display" mode, unplug, wait for it to go back to "MBP is solo display" mode, then repeat... eventually, for me at least, the big monitor will turn on for real, then I can close the MBP and all is well.
    This is sucky, but it does eventually get the 27" to show something. 
    The other symptoms are all the same... when it's doing this, the computer thinks it's displaying to the 27", USB and power are being sent to the MBP just fine, audio's working... just nothing is actually on the display.
    Oh, and for me, it also does it sometimes when the 27" goes to sleep, so I have the syspref set to "never sleep"... it goes black from the screen saver, but never turns off, 'cause then it's iffy if it'll come back on.
    I'd LOVE for them to eventually fix this... it's something in either the MBP firmware, the monitor firmware, or just something wrong with one or the other that isn't fixable... but it'd be nice to know.
    In the meantime, I rarely use my MBP as anything other than a desktop nowadays, so I leave it plugged in, don't let the monitor sleep, and all is well.

  • My MacBook Air won't turn on, despite being fully charged, and plugged into the power jack.  What should I try?

    I double checked the power connection, it's good.  The charge light is green, so it should be charged and turn on, right?  When I push the power button--nothing no startup sounds, nothing on the screen, keys don't light up.  It's completely dead, as if it is powered off.  I don't know if this could be having an effect on it...I upgraded to the latest operating system (Yosemite) a couple of days ago. After that, it wouldn't recognized our Epson WIFI printer.  The printer was visible as an option under print, but when selected there was a message saying it wasn't connected.  Even after going through the steps to add it agaiIn, after printing one document, then trying to print the next, the "printer was not connected" again. I gave up and shut it down for the day. Used it last night without any issues (except for being unable to print.). Now, this morning, nothing.

    Try a SMC reset:
    http://support.apple.com/en-us/HT201295
    Ciao.

  • My MacBook Pro shuts down when unplugged, even though fully charged. why?

    I keep my computer plugged in 99% of the time, but when I use it unplugged, it only works for a couple of minutes before it shuts down & won't come back on until I plug it back in. When I do, the battery is above 90% charged. Why does it shut down?

    Intel-based Macs: Resetting the System Management Controller (SMC)

  • My MacBook Pro 13" won't turn on 90% of the time I try to get it running, and when it does turn on, even on a charger, it shuts down if I stop using it for 2  seconds and it won't turn back on. Should I replace the battery?

    My MacBook Pro 13" won't turn on 90% of the time I try to get it running, and when it does turn on, even on a charger, it shuts down if I stop using it for 2+ seconds and it won't turn back on. Should I replace the battery?  It doesn't hold a charge either...

    EmadJamal,
    the battery won’t melt because of long connection to the AC charger, although that has the potential of reducing the battery’s life.
    Do you have access to a second 60 W AC charger to test with your MacBook Pro, or access to a second 13-inch MacBook Pro against which your AC charger could be tested?

Maybe you are looking for

  • Home sharing dropping on MacBookPro Retina

    Dear Forum, Ever since Mac OSX 10.9 and iTunes 11 I've found home sharing to stutter, and then halt unexpectedly for my laptop. My files are all on a 2011 iMac, connected to an Apple Airport Extreme via 1Gb ethernet.  The Airport then connects to my

  • Acrobat 9 Pro crash

    Every time I view separations in Adobe Acrobat Pro 9.3.0 on my 2 GHzIntel iMac - version 10.5.8 and click on separations (particularly Magenta) on any file Acrobat crashes. I have tried a re-install but to no avail. Has anyone else had this problem -

  • A movie I ment to download stopped near the end of the download I want to know what I can do

    A movie I ment to download stopped towards the end of the download

  • Adjustment layers not opening mask anymore

    On my laptop I choose an adjustment option and it creates a new layer and layer mask.  On the imac it only creates the layer with the adjustment.   I have to manually add the mask. I can't find a preference or setting or anything to get the two to be

  • How do I solve low memory ?

    My ipad screen keeps bouncing back to homescreen . Low memory ? How do I restore it ?