Macbook won't turn on

I have a macbook that is about 1 year old. I got a message in a black pop up box that said that I needed to restart the computer, it was in several different languages. I restared the computer once, about 2 minutes later the same screen popped up again, this time, when I restarted the computer it wouldn't reboot. it sound like it's going through the normal processes. I can hear it trying to boot but then it just quits. The screen is black during the whole process, I can't even get it to come to the "apple" screen.
I've tried restarting it without the battery
while pressing x
While pressing shift
while pressing cntrl command and p r
I tried taking the battery out and unhooking the power supply and pressing the on button for five seconds. basically I've tried everything the apple website says to do on their trouble shooting page but have gotten no results.
The last time I tried to reset the pram the computer gave me a series of loud tones in a cycle of three and the power on light would flash. I have no idea what is going on

You will find information on your issue in this thread:
http://discussions.apple.com/thread.jspa?threadID=379417

Similar Messages

  • Macbook won't turn on all the way.  Please help.

    Macbook won't turn on all the way.  At first it only showed the grey apple logo, but now it says that I need to restart the computer by holding down the power button for several seconds or pressing the restart button.  I tried this already but it's not doing anything.  Please help. 

    1) Make sure you have Blackberry Desktop Manager installed.
    http://na.blackberry.com/eng/services/desktop/
    2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
    "c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
    3) The Application Loader Wizard will appear -- click "Next."
    4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
    5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
    NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
    http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
    Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How do i transfer data from my old macbook 13" 2008 to my new macbook pro 13" but my old macbook won't turn on

    hello! i went to the Genius Bar and they told me my logic board needed to be replaced on my old white macbook 13". however, i need to get my data and information from my old macbook but my old macbook won't turn on. i was told by Genius Bar that the hard drive could be accessed via the 3 screws when the battery was removed and the hard drive could be turned into a external hard drive once removed. that way i could transfer my music, movies, pictures, etc. they told me that Best Buy could do the data transfer for me. i went to Geek Squad but they told me the hard drive wasn't accessable behind those 3 screws, that the ram was there instead. i just want to transfer my data. please help!

    Your Geek Squad wasn't very geeky. the hard drive is right next to the RAM.
    Here's the three screws
    Here's the hard drive tab that pulls the hard drive out.
    Here's the hard drive out and you can see the RAM in it's slots.

  • My macbook won't turn it on when running by battery

    my 13" macbook won't turn it on when running by battery even the battery is completely charged. Even though plugging by power my macbook still works. What should I do to make sure the battery of the macbook to make it work again.

    You might try to reset the SMC and/or PRAM. If that doesn't help you should contact apple service about getting it replaced.

  • My MacBook won't turn on?? please help

    My MacBook won't turn on, i can't remove the battery, and when i put it to charge the charger light is green which i think indicates it is fully charged? please help i have a report due and its on my computer.

    my computer won't turn on

  • My macbook pro got wet and the battery light is still on but my macbook won't turn on. What's the problem?

    My mabook pro got wet the other night, the battery light still works but my macbook won't turn on and should i just wait for it to completely dry up? Or what should i do to solve this problem?

    Just face facts - if water (or any other liquid) reached you logic board or any other electronic components, you're going to be the victim of corrosion.
    Eventually, you'll need to have the logic board replaced. There are liquid sensors all over your MBP and the techs can tell if these have been activated. I wouldn't turn the computer on at all - if it were me, I would take it to your local Apple Store/AASP and get an estimate for repair. Rice & other desiccates may 'dry up' the liquid, but it won't undo the damage already done.
    Clinton

  • My Magsafe adapter blew while charging and now Macbook won't turn on or charge?

    My macbook was completely dead (we just got back from vacation). I plugged it in to charge it with my Magsafe L adapter (that came with my macbook) and turned my macbook on. Within 20 minutes (it was around 40% charged at that point I believe), I heard a "pop" and the computer shut off. Completely. No warning. I felt the L shape and it was HOT. I immediately unplugged the adapter from the wall and the box was just as hot if not hotter. The 2 pronged plug has burn looking marks on the metal, which leads me to believe it blew and is dead. Now my macbook won't turn on. I tried a few troubleshooting things (control-command-power button for 3 seconds and shift-option-p-r-power button) and there was no response.
    Am I screwed? Will I even be able to get anything off my macbook?
    I purchased it in 2009ish if that helps.

    If you are in the US or Canada, you could make a Genius appointment
    at an Apple Store for a diagnostic check of the computer to see if the
    DC-in board (or magsafe board) is still OK.
    Or if it was toasted from the power surge or failure of the adapter. If
    so, then it would need a service for replacement. Troubleshooting
    the charging system may well extend to checking the rest of the
    computer hardware, as so much is integrated.
    There may be some ideas on repair questions in an appropriate
    iFixit guide for MacBooks, online at their site. Not sure if there is
    a guide for those power adapters, but had read where repairs had
    been attempted by individuals several years ago, posted online.
    Hopefully you can reconcile your differences with the MacBook.
    Good luck & happy computing!

  • My Macbook won't turn on and I have a lot of stuff id like to keep

    Macbook won't turn on need information

    If the green light flickers on your charger should you leave it plugged in or is that an indicator that the macbook is still not ready to turn on? Do I leave the charger in after I attempt to drain the battery? This has happened to me and I've left it unplugged for 2 days with no response when I try to turn it on.

  • My MacBook won't turn on ? It's on an updating screen then shuts off when I turn it back on the same things happens again over and over

    My MacBook won't turn on ? It's on an updating screen then shuts off when I turn it back on the same things happens again over and over

    On the bottom of your MBP is the serial number.  Enter it here and post back the model/year information:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    What OSX do you have installed?
    Ciao.

  • My MacBook won't turn on completely

    My MacBook won't turn on completely. It will be fully charged, with the indicator light on the charger green and everything. When I turn it on, the screen lights up and the start-up noise happends, but that's as far as it goes. It stays with the light blue screen with the apple and loading wheel for an hour or so, then it turns itself off. I've tried this a few times over the last week, and nothing has changed.

    For Mountain Lion v10.8  > OS X Mountain Lion: If you see a blue screen at startup
    For Lion v10.7  OS X Lion: If you see a blue screen at startup
    Snow Leopard v10.6 >  Mac OS X 10.6: If you see a blue screen at startup
    Tip ...
    Helps to state which OS X is installed.
    Click the Apple () menu top left in your screen. From the drop down menu click About This Mac. The version is noted there.
    Troubleshooting advice can depend on that information.

  • Macbook won't turn on, won't charge either (no green/amber light)

    So I was cleaning my keyboard today (just with water and a towel) and after cleaning, the screen shut off but my macbook was still turned on (could hear the fans). It wouldn't respond to anything and I tried a hard shut down but this did not work either. I was forced to take the battery out to shut it down.
    Now it won't turn on. I tried plugging it into my magsafe power adapter but it won't charge. There is no light (neither green or amber). My battery still has 2 green dots when I test it.
    I've tried resetting the power settings by removing the charger, battery, and then holding the power down for 5 seconds. This did not work.
    Any help would be greatly appreciated.

    I've had a very similar problem. My battery died about nine months ago and I've been going off AC since then. It recently started not turning on though.. I closed the lid one day and went for a walk and when I came back about an hour later it was like it was in a constant sleep mode. Since then it turned on once successfully. But I am getting the same dim green light for about three seconds and then it goes full. When I try to turn it on the fan or hard drive (not sure) starts spinning and the screen flashes but then it just sits with the sleep light on. When I read your thread though I realized I may have gotten it wet when carrying it to and from my car. I no longer have a warranty or care plan or whatever so apple won't help me one bit. SO yeah I thought I'd share that and maybe it can help you somehow..
    J

  • TS1365 Macbook won't turn on, I read the troubleshooting article

    I have a macbook pro that started shutting down on it's on last night while it was plugged in.  After shutting it down for the night, this morning it won't turn on at all.  The battery has a charge, I used the indicator on the battery itself and 3 lights light up so even if the charger is damaged it shouldn't matter since the battery has a charge right?
    My guess is whatever sends the charge to the computer isn't sending or receiving it.  I have a damaged headphone port so I was planning on swapping out a new logicboard anyway but my question is could the logic board have anything to do with this problem?  If so then the swap I was going to do will solve it anyway but if not then I guess I have to repair another part. 
    Any ideas?
    Thank you,
    Rene

    I just can't believe that small amount of liquid could ruin my macbook
    The traces (copper connections) on the logic boards are pretty close together.  It wouldn't take much to short two critical points out.
    I  hope putting it away for a few days (maybe in the warm sun) works for you.  Because that is all I would have suggested.

  • Newest Macbook won't turn on after sleep mode

    I have the 17" Macbook Pro I guess the base model (?), bought in september of 2012. I turned it on today perfectly fine for about a half an hour. I closed the screen just like I would any other time normally but just now when I opened it back up it won't turn back on. I tried the power button several times but nothing, the power is fine since it's plugged in with the green light on. I don't understand what is going on... help!

    http://support.apple.com/kb/PH11080
    http://support.apple.com/kb/PH11096
    maybe there is some help here

  • Macbook Won't Turn on, Battery Problems

    My 13 inch macbook was on late afternoon it shutdown once i tried to boot an application, it had been on all day. I have done everything apple has requested and this is not the first time the battery has failed on me, This time the computer won't turn on and i believe that i was given a defective battery with my macbook
    Who do i email to get a new macbook 13 inch battery?
    Any tips at all that will help me with turning it on?

    You can't e-mail. You either phone apple support or go by an apple store or service center. Have you done this. Troubleshooting a MacBook that won't turn on

  • TS1367 MY 11 INCH MACBOOK WON'T TURN ON AT ALL

    My 11 inch MacBook Air is from my school. They ordered a lease with apple and got over 50 kids the brand new MacBook airs and it is almost the end of the term and it ain't working. On the bus home it was working and 20 mins later I try to do work on it it just won't turn on. I left it on sleep and it just won't turn on no matter how long I hold the power button for. the charger is working fine and I tryed resetting the PRAM and the SMC or whatever that second thing is and it's not doing crap. I don't want to bring it to an apple genius because it will cost me big time. PLEASE HElP ME IM IN ****

    Try resetting the SMC. This page has the instructions - you have to scroll down about a thrd of the way through the page:
    http://support.apple.com/kb/HT3964

  • Macbook won't turn on after trying to install windows

    Guys, I'm really desperate here.. I was installing Windows XP on my friend's macbook pro and it suddenly turned off (it didn't have much battery left).. then we tried to turn the macbook on again it just won't turn of.. we press the power button and nothing happens
    can someone help me here please?

    Did you re-charge it fully? How do you go about installing software or doing something else important and not being connected to live power?

Maybe you are looking for

  • Why do I get a program error when changing colors?

    I get a 'Could not complete your request because of a program error' when I try to change colors on both the forground/background palette or from the color picker palette.  Is there a patch for this? I am using Photoshop CS6 version 13.0.1.x64

  • Svet's Fermi/Kepler VBIOS/EC Tuner - [ver: 3.00u]

    VBIOS Flashing and Safety Procedures: Always make a VBIOS backup, before start messing with your VBIOS!! You can do this with GPU-Z: http://www.techpowerup.com/downloads/SysInfo/GPU-Z/ or with Nvidia Flash Tool[under windows]: http://www.techpowerup.

  • Ipod 160g does not appear on itunes but it appears on windows when in disk mode

    my ipod 160 g does not appear in itune (disk mode or not) but it appears in windows as IPOD (F:) only when it's in disk mode. I tried reseting it by holding the menu and center button it stop but then it goes back to the apple logo screen and stay on

  • Automatic reply settings cannot be displayed (O365 -Exchange 2013)

    Good afternoon, I am currently having a problem with one employee who uses the automatic replys when he is away from work. The error I get when trying to turn his replies on or off from outlook 2013 is "your automatic reply settings cannot be display

  • Replacing hubs with switches help needed

    I'm new at this so bear with me. I have two LANs, 10.0.0.x and 10.1.0.x, connected via firewall/router with 10.0.0.245 and 10.1.0.5 address. Clients and servers are connected to hubs on both networks. I want to replace the hubs with 2960TT switches a