Macbook wont power on with AC power but Will with Battery

when i try to power on my Macbook it shuts off immediatly if i use AC Power but if i unplug the Ac Cord and use the Battery it does power on
Battery has an X on the display
i took it to the genius bar a few days ago and the tech took off the battery,held down the power button for 30 seconds then re-installed the battery
this corrected the X on the display for ONE DAYthen it came back
any idea what the problem is
and are both of the above things related?

sorry wrong post, please ignore. too many threads with similar issues.
Message was edited by: drupii

Similar Messages

  • Macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again

    macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before

    If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
    It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
    Good luck - take the issue as high up the food chain as you can and see what happens.
    Clinton

  • My ipod 4rth generation wont connect to my hom wifi but will connect to others . like when i try to use apps that require wifi it says i dont have wifi . HELP !

    my ipod 4rth generation wont connect to my hom wifi but will connect to others . like when i try to use apps that require wifi it says i dont have wifi . HELP !

    Since you have already isolated it down to your home network, if following Steve's instructions do not fix your issue, contact your Internet Service Provider or Router Manufacturer and make sure your network is set up according to this information: iOS and OS X: Recommended settings for Wi-Fi routers and access points

  • Power , but will not start

    I have an IBM t43.
    Last night left in hibernate and went to sleep.
    Will not start today. 
    When plugged in power light showed yellow, but is now green, but flashing.
    I have remove battery, hard drive, cd and memery and rep-laced. but will not start. no power. no noise
    Please some suggestions
     Steve
    [email protected] 

    Welcome to the forum!
    Let's try this: remove the battery, hard and media drives. Unplug the AC adapter. Press the "power" button 10 times in a row, holding it down for 10 seconds each time and 30 seconds the last time around.
    Plug the AC adapter back in and try to power on.
    Good luck and let us know.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • MacBook Pro Retina says connected to ethernet, but will not connect

    I have a MacBook Pro 13" Retina. It will not connect to my office's network no matter what I do. I've tried different cables, different ports, toggling wifi on and off, inspecting the ports to see if they will recognize other thunderbolt connections and they will. I was able to connect to a Thunderbolt monitor without any issues. It may be the adapter, but there are all kinds of funky-ness going on when I try to assess the network. The thunderbolt heading under System Information claims nothing is connected - even when communicating with the Thunderbolt display. The ethernet connection claims to be working, but will not connect to the internet. It also can't seem to find our router. I've tried to manually enter all the information in using the assistant, but it still can't find it. This is especially frustrating since this computer is under a year old. I can't take it to the Genius Bar because it is owned by my company and contains proprietary info. Any help would be greatly appreciated.

    Hello NotAppleSavy,
    Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • HELP! Macbook wont power up and keeps on ejecting.

    I just updated the software on my new 1.83 Intel Core MacBook by clicking on that link under the apple-about this mac tab... after it installed all the software, a message popped up and said something about quitting all applications, shutting down the computer and holding the power button until the light flashes repeatedly. I've never seen anything like this but I did that and now the computer wont even start! The light on the front comes on, the screen blinks once and the CD slot keeps on ejecting .... over and over again.... There is NO DISC! If I put in a disc it tries to push it out and then takes it in... but you can still hear it ejecting... but this time more quiet, and now you cant actually eject the disc unless you turn off the power, turn it back on, and then quickly hit the eject button. I dont want it to damage itself so I just held the power button again until the whole thing shut off. I feel like punching the computer!
    I also tried the to reset it by taking out the battery and holding the power button for 5 sec... then putting the battery back and starting it up... but that didn't do a got dam thing.
    Does anyone know why my Mac crapped on me out on me?!
    Thanks!
    -Chris
    1.25 PowerPC G4/1.83 Intel Core MacBook   Mac OS X (10.4.8)   768 MB DDR-G4 /512 MB DDR2-MacBook

    I Could Kiss You! That seemed to do the trick! I dont know why it cra pped out on me half way through this process.... but it updated now and all seems well. The only thing is that when I went to Utilities on my PowerMac... Disc Utilities doesn't seem to exist there... so I opened it up using the help tab and when I got to it, the FirmwareRestorationCD.dmg didn't even exist... it doesn't even seem to be in the computer. Have any idea about that one?
    I had to download the dmg off the website.
    Thank You so much for the help too! You Just saved my laptop and turned it back from a Huge Paper weight to a Working MacBook.

  • MAcbook wont power up

    Hi, when i push the power button on my white macbook it will show the apple logo, and the little loading thing below then a like circle with a line through it pops up...
    i dont know whats wrong. can anyone help?

    I finally got my computer in to the genius bar. The hard drive is fried. I was told that they are using the same parts as pcs except for the Air. Since I am still under warranty, they are replacing the HD and fixing the chipped case but if I want to save my data I have to pay $50, even though its Apple's fault I'm losing my data. I saved a few pics to a flash drive but did lose some data. Now I'll purchase the extended warranty. I have only owned Apples. I had one of the first, the LCII. I still have 2 working computers, one about 12 years old and another about 6. I don't know if I'll get another 6 years out of this one.

  • Macbook wont power on (2008)

    I just purchsed a nice Macbook off ebay.  Its the white 2008 version.  The seller swears it was working when he shipped it and is offering a refund if I cant get it to work (which leads me to believe he isnt lying)  UPS dropped it off today.  I hit the power button and absolutely nothing happens.  By pressing the button on the battery it shows a full charge.  He said he did a fresh install of OSX 10.5, and then shut it down when it started asking for personal info and then boxed it up and shipped it off!
    I have already tried:
    -Removing battery, power cable, holding down power button for 5 seconds, putting battery back in and plugging it in and got nothing.  I also tried this without putting the battery in and running off AC power and also only using the battery with no AC power.   Nothing worked.
    -Found another article that said hold down command, option, P, and R and press power (didnt work)
    -Also tried removing both sticks of ram and re-seating them and that didnt work either.
    I will probably have to take it to the genius bar this weekend if I cant get it running.  Just wondering if there was anything else i've missed I could try??

    Please make a Genius Appointment and take it in for service.

  • IBook G3 800 GHz will work on battery power but will not turn on with AC pl

    This iBook will function with a battery, but when the AC is plugged in it does nothing. It will not turn on. Is this a logic board problem or maybe a short or something not connected inside for the AC plug?

    It's a rather complicated repair:
    http://www.ifixit.com/Guide/Repair/iBook-G3-12-Inch-DC-In-Board/134/1
    Apple doesn't consider it a do-it-yourself job.
    Expect to pay $115-$145 for the repair (plus shipping if you have to send it away). The iBook may not be worth the repair, so some people are trying to do it themselves.

  • MacBook wont power up , plugged in or unplugged

    Anyone have these issues before  worked fine last night

    Have you tried resetting the System Management Controller? That is a good first step for power related issues such as this.
    Best of luck.

  • My new iphone 4  wont power on does the battery have to charge first? It was shipped thru mail and took 7days to get here.I managed to turn it on once and shut it of because i had to put sim card in.Now it wont power on.

    I tried holding down both buttons like everyone said and this doesnt work. My phone was shipped new from Ontario to Sask and took about a week to get here,Could it be because my battery is so low? And shouldnt it power on when it's plugged in or show a phone charging icon or have some lite on? My laptop won't even discover it when I plug it in. When I first took it out of the box i called virgin mobile.The lady told me to put sim card in because it did turn on at first and was asking for sim card so i put it in and all kinds of languages were displayed so i clicked on english and then then somehow shut the phone off because i wasnt familiar with it yet i have no idea how i shut it off.Anyway, I read a bit further and saw where the power button was and tried to turn it back on. No luck the apple logo appears with what looks like a hairline crack on the apple itself and a very thin blue bar no thicker than a pen stroke its about halfway right behind the apple logo like its going to power on but it doesnt, it just goes black.Then when I hold the 2 buttons down, the home button and the power button at the same time, the apple logo flahes on about every 3or4 seconds as tho its going to turn on but it doesnt, occasionally the bar comes up with the logo but not every time.What can I do? Will it work if I let it charge for a couple hours? Does it need a couple hrs and shud there at least be a charging icon showing me its charging?? I have it hooked up by USB to my laptop charging.My computer and Itunes doesnt even acknowledge its even there. PLEASE HELP? Thanks so much!

    Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

  • Pavilion dv6 - laptop receiving power but will not power on

    Pavilion dv6-6c53cl
    Windows 7
    As of earlier tonight, I can no longer power on my laptop. (I powered it successfully earlier today.) When the power adapter is plugged in, the indicator light on the laptop next to the power connector socket turns on, so at least the laptop is receiving power. I've tried removing the battery and disconnecting the adapter, draining the power, and reconnecting the adapter with and without the battery in, and in various orders. I've also tried removing and reseating both RAM sticks and the hard drive, all to no avail. Any suggestions?
    This is the fourth major failure of this system---the first three were a fan problem just weeks after purchase, a hard drive failure, and another fan problem---since I purchased it 22 months ago, and I feel I've bought a lemon.
    I'd like to avoid taking this in for repair if possible, because the local repair contractor (I live in Australia) badly bungled the previous repair: They took several weeks even to start on the repair, failed to fix one problem, and introduced a second, more severe problem (a keyboard failure, which somehow they didn't test despite apparently removing and reseating it when fixing a fan problem). I asked HP support about this, and the rep said there were no other shops near where I live that do in-warranty repairs. Please help!

    Can you post the different things you have tried and Current version of OS on this notebook?
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • System has power but will not load up to bios.

    system will not load to bios after i just installed the mother board. power and ever thing else seems to be working, but it still will not boot; even to bios. i have a neo pt8 can any one help me give me hints of what might be worng once i get it to bios i can take it from their. my aim is caperneoignis
    my system specs are
    p4 1.6ghz 256 cache 400mhz 478 pin
    samsung 512 ram ddr 266
    singel IDE 100 7,000 rpm westren digtal hd
    nvida geforce 4 128mb couldnt rember the exat make
    sound blaster auidgy gamer
    450 watt turbolink switching power supply
    +3.3/28A +5/40A +12/18A
    mother board is a pt8 neo
    if you need any more info let me know

    Read and post all the info asked for in this  Moan Guide

  • Adobe CC Apps wont launch on my Admin account but will on a guest account on my Macbook Pro

    Hi,
    My company owns an Adobe CC lisence. I've downloaded Prem Pro, AE, Photoshop and Bridge on to my brand new retine Macbook Pro running Mavericks, and none of the apps will launch properly on my main administrator account.
    Prem Pro just crashes at the splash screen, Photoshop loads to a new project screen then crashes, AE says its can't load because of an error, each them a different reason.
    However, I can get them to work when switching user accounts to a guest account. Both the Macbook and Adobe CC subscriptions are new, so I can't understand why it's working on one account and not another?
    It's useless to me that it doesn't work on my admin account, as the laptop is both my work and personal computer, so everything is on the main admin account, a guest account is literally just for a guest to login.
    Any help?
    Cheers,
    Phil

    Phil please see Troubleshoot unexpected behavior | User account-specific | Adobe software | Mac OS - http://helpx.adobe.com/x-productkb/global/troubleshoot-unexpected-behavior-user-account.ht ml for information on how to resolve the errors you are receiving under your current User account.

  • My ipod touch 3g displays logo and low power but will not turn on

    My Ipod 3g displays the apple logo and the low battery screen but it will not turn on.
    Help please?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    Also maybe here:
    See:
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • Account requires an assignment to a CO object in MIRO

    Dear Experts,                   Can anyone tell me why in OKb9 the Cost Element (small price diff) is not picking up the Profit center even though it is assigned in the default settings. In OKB9 I have assigned 3 i,e, prf Centre is mandatory. The cos

  • JVM help

    hello, I am trying to get the hang of this JNI and JVM stuff...killing me. I am trying to get a C++ application to interrupt a java program that is in idle or just have it interrupt a certain thread then I can have the java application do something.

  • AA3 can't read BWF from Reaper -Looks like a bug to me

    wav files made in Reaper (ver 3.11) can have the bext BWF timestamp. These files read just fine in AA (v1.5, ), Sound devices Wave Agent, Widget Pro, SSL ProConvert, Nuendo, Samplitude & Reaper itself. AA3 sees them as being BWF files & there is some

  • Fan working all the time

    My fan starts working non stop a few minutes after I turn on my computer. I use the same surface as always did. Thank you

  • Imexpire utility problem

    Hello, I am trying to release disk space running: imexpire utility. I have configured store.expire like documentation indicates, but in logs always appear: [22/May/2005:17:41:49 -0500] delta imexpire[296]: Store Notice: user/usuario/INBOX: expired 0