Macbook wont start and white graysh screen with a folder with question mark

Was on internet, the macbook froze,couldnt do any thing, then pressed to switch botton, but when it turn on again th white screen came up, after a while a folder with questio mark keeps flashing with the white/graysh screen at the back.
Tried to use the mac os cd but seems like there's no harddrive to complete the intalation.
Tried the first aid but also nothing happened..

Sorry to say but your hard drive is officially dead. You can try removing it and putting it back in but I doubt that will work. The same thing happen to me and I lost everything. Your only option to recover your data would be to try a contacting a data recovery business. But I tried that and the estimate was $700 and they couldn't guarantee anything. Best of luck!

Similar Messages

When I start MacBook Pro13 shows gray Screen and flashing file Image with question mark

When I start MacBook Pro13 shows gray Screen and flashing file Image with question mark , it's brand new I just receive it from Apple Store .

Startup Manager to select Startup disk.
http://support.apple.com/kb/HT1310
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836

Macbook wont start and makes ticking noise

The subject line says it all. My macbook wont start and it makes clicking noises from inside the case, kind of like a watch. The display turns on and the chime goes when it starts, but the screen stays white and nothing happens.

You can run diagnostics from the OSX disc. Insert disc one and while it is booting hold down the d key. This should take you into diagnostics.
You might also try to reset PRAM AND PMU first.
SMC/PMU Reset
http://docs.info.apple.com/article.html?artnum=303319
PRAM Reset
http://docs.info.apple.com/article.html?artnum=2238
Mort

Before partition by Boot Camp on Mac Book Pro With Mac OS Lion the computer restarts but not open wizard of Windows 7 and appears the apple with question mark...

Before partition by Boot Camp on Mac Book Pro With Mac OS Lion the computer restarts but not open wizard of Windows 7 install and appears the apple with question mark...don't recognize disk..

Apparently Zoo Tycoon can't be played on anything newer than 10.7.
https://discussions.apple.com/message/21885910#21885910
Roller Coaster Tycoon is available for purchase from the App Store.

My macbook fell and since then a white screen with question mark appears

hey guys!
i really need to know what to do, my macbook fell while it was on. it froze so i restarted it, but the white screen comes in with the apple begining sound and everything but the screen stays blank for about two minutes and then a folde with a question mark appears. i tried putting in the cd that came with it, samething happened but after a while the appe sign appears and the computer started off my installation disc, so i try re installing everything, but when i get to the screen that asks to select a destination, there is nothing available.
i realize that the best thing to do is to go to an apple store and then sort everything out, but i am in haiti where the nearest apple store is in miami, i really need your help and i'm desparate cuz i cannot do anything without my laptop... please send me your help as soon as possible.
thanks in advance

Your hard disk has been damaged. At this point, it will need to be replaced with a new one. You'll need to call AppleCare and they'll have you mail it in for repairs. I'm not sure what the usual turnaround time for that is internationally, but in the United States it's about a week. I'd tack on a few extra days to get the laptop to and from Haiti.
Either way, your computer will need to be repaired and the data that was on your hard disk will be lost. (Unless you take the machine to a 3rd party repair shop that specializes in recovering data from damaged hard disks.)

White battery logo with question mark screen - can't get into usb mode (and now black screen)

I noticed that my hp touchpad was shutting down while in standby. I imagined it was a autoupgrade and so when it booted up and started installing the new webos I panicked and hit the power and home buttons to prevent the upgrade because I have CM7 alpha 3.5.
When I booted it up again I could only see a battery icon with a question mark in the middle. I can't make my win7 pc recognize the tablet and nor does the hp doctor for the same reason.
Does anyone have a clue how I can fix this? I know that some people in the past had this same issue that was caused by faulty usb cable or not having the battery correctly inserted (for other webos devices) but this is not the case. Just before I canceled the upgrade I had 20% battery and I had it plugged in and charging.
After letting the battery empty itself out I charged it overnight and now I have no response from it. Even after pressing the home and power buttons for minutes.
Thanks.
Post relates to: HP TouchPad (WiFi)

I agree on the updates, I wish it wasn't automatic. I completely, totally agree.
Keep in mind, you can't complain about having CM7 messed up from webOS updates. CM7 is not supported on this hardware by HP. CM7 is all on you.
There was no webOS upgrade in your case. The upgrade was stopped midstream, possibly damaging the TouchPad.
I asked 'why did you do that', because I actually want to know why in the world anyone would ever stop a firmware upgrade. It's like teasing a crocodile with chicken meat and wondering why it bit your hand off. You seem to know your way around technology, so I can't understand why you'd stop a firmware upgrade. I'm sure you know how dangerous that is. I did, in fact, provide a constructive suggestion. But not a solution, because I don't know of one. I haven't run across anyone who stopped their TP's upgrade process midstream. I am sure it's happened before somewhere, I just don't know about it.

TS3423 my start drive not responding. getting grey screen with question mark in a folder. when i use disk utility drive wont mount

When I turn on my Mac I get a grey screen with a folder with a question mark . Have tried the disk utility to no avail as the disk has apparently dismounted and will not mount even though the mount option is available. I have recently upgraded from snow leopard go os x maverick

This could be a software/state problem or a hardware problem. In your case it sounds like the latter but you should try the steps below in case it might help.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570

White Screen with Question Mark Flashing

Hi
All the sudden I have the white screen with the flashing question mark. I have a macbook pro 2010. I unscrewed the bottom of my Mac and wiggled a couple of wires around and it actually booted up and ran for a while. Then it started to freeze on me. I put in the Mac disk, and I went to the disk Utitlity and it says disk 2 Mac OS X Base System. So it looks like it is reading the Hard Drive, but I don't know because I do not know that much about computers. The thing is it will not let me erase or repair that drive. Does anybody have any idea on what this is? I used my computer around 1:30 in the afternoon and then came home to do homework around 5 and in a matter of 4 hours my computer does not work. I am guessing that it is probably something serious and I will not be buying mac again.
Any Help??
Thanks,
Matt

Hi
All the sudden I have the white screen with the flashing question mark. I have a macbook pro 2010. I unscrewed the bottom of my Mac and wiggled a couple of wires around and it actually booted up and ran for a while. Then it started to freeze on me. I put in the Mac disk, and I went to the disk Utitlity and it says disk 2 Mac OS X Base System. So it looks like it is reading the Hard Drive, but I don't know because I do not know that much about computers. The thing is it will not let me erase or repair that drive. Does anybody have any idea on what this is? I used my computer around 1:30 in the afternoon and then came home to do homework around 5 and in a matter of 4 hours my computer does not work. I am guessing that it is probably something serious and I will not be buying mac again.
Any Help??
Thanks,
Matt

White screen with question mark

I tried to update my mac book air, to the new operating system, in the middle of the operation, I got the white screen, with blinking question mark in a middle of a file

Go step by step and test.
http://support.apple.com/kb/ts1440
Startup Manager to select Startup disk.
http://support.apple.com/kb/HT1310
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
Reset PRAM.
http://support.apple.com/kb/PH4405
Reinstall OS X
http://support.apple.com/kb/PH10763?viewlocale=en_US

White screen with question mark on iMac

I have a white screen with a file folder icon and a question mark. Anyone know what's wrong? The iMac will not load.

Besides checking out the possible solutions over in the "More Like This" thread over here----------------------->
Check out KB Article:
http://support.apple.com/kb/PH11046 OS X Mountain Lion: If a flashing question mark appears

MBP has gray screen with question mark folder on start up

Hi Mac Experts,
I have a MBP that won't start up. I get a gray screen with the question mark folder. Nothing else. I tried starting without the battery and also while holding the shift key but still get the same result. Any idea what happened and what I should try next? Thanks!

Need a Vacation:
Use the Leopard disk.
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior

Grey screen with question mark on boot up.

My son's 2011-12 Macbook Pro displays a grey screen with a question mark and will not boot. I pulled that first drive, put that first drive in a USB cage and connected the USB cage through a USB port and could boot a different machine with the first drive. I put a brand new second drive with a formatted and journaled OSX drive in place of the original first drive in my son's macbook pro machine tand got the same grey screen and question mark. Do I need a new electronics board? If so that is a $500 repair and not worth it on a 3 year old machine. Thoughts?

It could be anything at this point - most likely, it seems, is that you've a faulty SATA cable. If you go to www.ifixit.com you can find the Apple part number for the cable (or buy the cable at ifixit, even) and search eBay for the part number (much less expensive on eBay and I've yet to hear of one from eBay having failed).
I'm betting that's the problem.
Clinton

Grey screen with question mark on folder?

Just turned on my MacBook and it opened up with a grey screen with a folder in the middle with a question mark, what does this mean? I am also hearing a clicking sound from inside the computer.

frederic, with due respect: this solution is good if the disk is good, if the disk is dying, therefore ? is not due to a corrupt system, but a dying disk, then this solution may impede later recovery of data, which is still possible, if need be and if the disk is not entirely dead. Usually they do not not die over night.

Mac OS X Leopard not working (grey screen with question mark appearing)

Hello. I have a Desktop Mac Running on Leopard (not Snow Leopard) and it gives me the grey screen with a question mark. It has been doing this for a month now, and i had to restart it holding the C key every time, and now it has stopped working. I am using a Logitech mouse and keyboard, and had a disk inserted so i cant insert the installation disk. What should i do?

You will have to reinstall OS X. Connect the original keyboard and mouse. Restart the computer and hold down the mouse button immediately after the chime. This should force the optical drive to eject the disc. Otherwise see the following:
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this:
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject.
If this fails then try this:
Boot the computer into single-user mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
Once the disc has been removed you can try to do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Missing Plug-In and Getting Blue Squares with Question Mark

I am on a brand new pc, 64-bit Windows 7, all programs downloaded in the last week. I have used safari for years on my mac and want to keep using it on the pc but video and images are not displaying. For video content it says "missing plug-in" but doesn't tell me what plug-in I need. Some images do not display and I get the blue square with a question mark.
I downloaded a plug-in from apple but it seems to be for Firefox. I installed the 64-bit beta Flash player and it didn't help. The next site I tried to access told me I needed the Flash player so I tried downloading the regular Flash player even though I knew it wouldn't work. It didn't download and seems to have taken the beta with it, wherever it went (have searched computer). Things that don't display in safari work just fine when I switch to Chrome.
I have the latest version of Quicktime which came with iTunes. I messed with some of the default program settings, trying to get QuickTime to take over whenever possible but it doesn't seem to have made any difference.
On my mac I had used Flip4Mac to take care of similar issues. I didn't think I would have similar problems on the pc. Help anyone?

Blue box with a question mark means that images are not available now.
Servers storing those images may be down.
Best.

Macbook wont start and white graysh screen with a folder with question mark

Similar Messages

Maybe you are looking for