Macbookair keeps restarting every five mins

I have a mid 2012 macbook air that keeps retartedevery 4-5 mins. it will boot up fine and shut down without a problem but if i am working on or even if it is not doing anything it will shutdown without warning after about 4 mins. it makes no difference at all if the power cable is connected or not or whether the battery is at 100% or 20%
i have checked and rechecked the power and battery settings but even if they are set to never switch off, it still restarts after about 4 mins. ive also tried the smc reset (left side shift,control,option and power button held down) but that made no difference either
can anyone help?

Back up all data. Boot in Recovery mode and test. If the same thing happens, the machine has to be repaired. If it doesn't happen, reinstall OS X.

Similar Messages

  • Iphone 4 keeps restarting every 3 min but only when being used

    Iphone 4 keeps restarting every 3 min but only when being used, it doesn't matter what I do with it, it has to restart itself during usage, it's so annoying. I have restored but still no luck, currently trying to update the software once I've finished downloading it but I know it will keep restarting when connected to itunes.
    Anyways when I do decided to bring it to the apple store would I need to bring the receipt with me?
    because i dont have it anymore only the phone, box charger and usb
    thanks

    Anyways when I do decided to bring it to the apple store would I need to bring the receipt with me?
    No. The warranty is tied to the device, not the individual & all iphone 4's are still under warranty.

  • HT4623 my ipad 1 keep restarting every 3 min

    my ipad 1 keep restarting every 3 min

    Hello there, afu7830.
    The following Knowledge Base article provides some good steps for troubleshooting your issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Particularly:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro

  • My ipad 3 keeps crashing and restarting every 2 mins pleaseee help

    can someone give me solutions in how to fix my Ipad3 because it keeps crashing and restarting every 2 mins and it doesn't stop, i tried to hold the lock button and the home button until it restarts but it does work , please help

    Are you have other apps or other things display with strange characters like much of the diagnostic report you posted?
    This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

  • My iPad keeps restarting every 2-5 mins

    my iPad keeps restarting every 2-5 mins

    Hi cdelorenzo,
    Thank you for using Apple Support Communities. 
    I see your iPad keeps restarting. This article addresses this issue. 
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
    Regards,
    Jeff D. 

  • Incomng and Outgoing calls are stop routing every five min

    Dear Team,
    Please find the attached running config and logs.Incoming and outgoing calls are landing on the gateway properly. But call stop working every five min.PRI is up and no error on controller E1.
    Please advise how to identify the issue?
    CUCM version 4.2
    debug isdn q921
    *Sep  2 08:48:21.874: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=2 nr=34
    *Sep  2 08:48:21.890: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=3
    *Sep  2 08:48:21.942: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=34 nr=3
    *Sep  2 08:48:21.942: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=35
    *Sep  2 08:48:27.866: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=35 nr=3
    *Sep  2 08:48:27.866: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=36
    *Sep  2 08:48:34.322: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=36 nr=3
    *Sep  2 08:48:34.322: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=37
    *Sep  2 08:48:34.326: %ISDN-6-CONNECT: Interface Serial0/0/1:27 is now connected to 0503726912 N/A
    *Sep  2 08:48:34.326: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=3 nr=37
    *Sep  2 08:48:34.342: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=4
    *Sep  2 08:48:39.694: %ISDN-6-DISCONNECT: Interface Serial0/0/1:29  disconnected from 0094777382372 , call lasted 181 seconds
    *Sep  2 08:48:39.698: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=4 nr=37
    *Sep  2 08:48:39.706: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=5
    *Sep  2 08:48:39.730: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=37 nr=5
    *Sep  2 08:48:39.730: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=38
    *Sep  2 08:48:39.734: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=5 nr=38
    *Sep  2 08:48:39.746: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 voice-port 0/1/2
    *Sep  2 08:48:49.746: ISDN Se0/0/1:15 Q921: User TX -> RRp sapi=0 tei=0 nr=38
    *Sep  2 08:48:49.758: ISDN Se0/0/1:15 Q921: User RX <- RRf sapi=0 tei=0 nrsh
    *Sep  2 08:48:59.762: ISDN Se0/0/1:15 Q921: User TX -> RRp sapi=0 tei=0 nr=38
    *Sep  2 08:48:59.766: ISDN Se0/0/1:15 Q921: User RX <- RRf sapi=0 tei=0 nr
    *Sep  2 08:49:01.946: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=38 nr=6
    *Sep  2 08:49:01.950: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=39
    *Sep  2 08:49:01.950: %ISDN-6-DISCONNECT: Interface Serial0/0/1:27  disconnected from 0503726912 , call lasted 27 seconds
    Voice-Gw#
    Voice-Gw#
    Voice-Gw#
    Voice-Gw#
    *Sep  2 08:49:01.954: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=6 nr=39
    *Sep  2 08:49:01.962: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=7
    *Sep  2 08:49:02.034: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=39 nr=7
    *Sep  2 08:49:02.034: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=40
    controller E1 0/0/1
     pri-group timeslots 1-31
    interface Serial0/0/1:15
     no ip address
     encapsulation hdlc
     isdn switch-type primary-net5
     isdn incoming-voice voice
     no cdp enable
    =======================
    Voice-Gw#
    *Sep  2 08:55:25.214: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=71 nr=27
    *Sep  2 08:55:25.214: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=72
    *Sep  2 08:55:25.234: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=27 nr=72
    *Sep  2 08:55:25.246: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=28 nr=72
    *Sep  2 08:55:25.250: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=28
    *Sep  2 08:55:25.258: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=29
    *Sep  2 08:55:27.518: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=72 nr=29
    *Sep  2 08:55:27.518: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=73
    *Sep  2 08:55:27.522: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=29 nr=73
    *Sep  2 08:55:27.534: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=30
    *Sep  2 08:55:27.546: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=73 nr=30
    *Sep  2 08:55:27.546: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=74
    *Sep  2 08:55:33.318: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=30 nr=74
    *Sep  2 08:55:33.330: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=31
    *Sep  2 08:55:33.390: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=74 nr=31
    *Sep  2 08:55:33.394: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=75
    *Sep  2 08:55:37.190: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=75 nr=31
    *Sep  2 08:55:37.194: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=76
    *Sep  2 08:55:38.534: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=76 nr=31
    *Sep  2 08:55:38.534: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=77
    *Sep  2 08:55:38.538: %ISDN-6-CONNECT: Interface Serial0/0/1:27 is now connected to 0504312690 N/A
    *Sep  2 08:55:38.538: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=31 nr=77
    *Sep  2 08:55:38.554: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=32
    *Sep  2 08:55:42.542: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=32 nr=77
    *Sep  2 08:55:42.554: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=33
    *Sep  2 08:55:42.606: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=77 nr=33
    *Sep  2 08:55:42.606: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=78
    *Sep  2 08:55:46.766: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=78 nr=3
    % Invalid input detected at '^' marker.
    Voice-Gw#sh controllers e1 0/0/1
    E1 0/0/1 is up.
      Applique type is Channelized E1 - balanced
      No alarms detected.
      alarm-trigger is not set
      Version info Firmware: 20060711, FPGA: 13, spm_count = 0
      Framing is CRC4, Line Code is HDB3, Clock Source is Line.
      CRC Threshold is 320. Reported from firmware  is 320.
      Data in current interval (99 seconds elapsed):
         0 Line Code Violations, 0 Path Code Violations
         0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
         0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
    Voice-Gw#
    Voice-Gw(config)#do sh isdn statu
    Global ISDN Switchtype = primary-net5
    ISDN Serial0/0/0:15 interface
            dsl 0, interface ISDN Switchtype = primary-net5
        Layer 1 Status:
            DEACTIVATED
        Layer 2 Status:
            TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
        Layer 3 Status:
            0 Active Layer 3 Call(s)
        Active dsl 0 CCBs = 0
        The Free Channel Mask:  0x00000000
        Number of L2 Discards = 0, L2 Session ID = 0
    ISDN Serial0/0/1:15 interface
            dsl 1, interface ISDN Switchtype = primary-net5
        Layer 1 Status:
            ACTIVE
        Layer 2 Status:
            TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
        Layer 3 Status:
            3 Active Layer 3 Call(s)
            CCB:callid=E3C0, sapi=0, ces=0, B-chan=30, calltype=VOICE
            CCB:callid=E3C6, sapi=0, ces=0, B-chan=31, calltype=VOICE
            CCB:callid=E3CB, sapi=0, ces=0, B-chan=29, calltype=VOICE
        Active dsl 1 CCBs = 3
        The Free Channel Mask:  0x8FFF7FFF
        Number of L2 Discards = 0, L2 Session ID = 2
        Total Allocated ISDN CCBs = 3

    Hi.
    Can you please also attach a CUCM trace during a disconnected call?
    Thanks
    Regards
    Carlo

  • HT4623 My iphone5 keep restarting every hour after i update it with the new ios 7.1.1.Do u know why?

    My iphone5 keep restarting every hour after i update it with the new ios 7.1.1.Do u know why?

    have you ever tried itunes on your friends pc or someone if you have trusted that pc in your iphone then you can

  • Iphone keeps rebooting every 2 mins..help

    iphone keeps rebooting every 2 mins..help
    tried holding down on and home buttons ..not working

    See Here
    http://support.apple.com/kb/HT1808

  • Why firefox keep crashing every 5 min on my android tablet?

    why firefox keep crashing every 5 min on my android tablet?

    What website you are you trying to visit? What is the brand and model of the device?

  • My phone keeps restarting every 5 minutes. how do i make it stop

    my phone keeps restarting every 5 minutes. how do i make it stop

    Try to sync you phone with iTunes to create a new backup before it restarts.  Also try to import your photos (see http://support.apple.com/kb/HT4083) and back up your contacts if you can (sync them to iCloud in Settings>iCloud>Contacts>On or use an app like My Contact Backup).  When done, force you phone into recovery mode and restore it, as explained here: http://support.apple.com/kb/ht1808.

  • IPHONE 5 keeps restarting every 5 minutes

    Iphone 5 keeps restarting every 5 minutes. the screen turns black and then the apple logo shows up. does anyone know how to fix this?

    Hello jonah910,
    Thanks for using Apple Support Communities.
    I'm sorry to hear about the issue you're having with your iPhone, I definitely see how it is a frustrating experience!
    I'd like you to follow the troubleshooting in the following article to help resolve the issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Specifically the section under power & battery:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Take care,
    Alex H.

  • My Iphone 5 keeps restarting every 2-3 minutes

    My iphone 5 keeps restarting every 2-3 minutes. its never been dropped or water damaged. I can hardly use it at all. The phone is only 4 months old bought brand new. Has this happened to anyone else? how can i fix this?

    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • GTalk keeps disconnecting every 5 mins

    Hi,
    I bought a new MacBook Pro running Lion and am having problem using GTalk on iChat. I configured GTalk using both Jabber and Google Talk drop down but have had the same problem.
    I keep getting disconnected every 5 mins and would need to login again. Are there any settings that I am missing?

    Hi,
    Do you have any other Accounts set up in iChat ?
    Bonjour might be easiest if you have another Mac to "Chat" with as we might be talking about Wifi Drops rather than a Server end issue.
    Have you tried creating a Second Mac User Account for testing and trying it there ?
    10:38 PM      Friday; October 14, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • My i phone 5 keeps restarting every 5 minutes, why?

    Hi,
    I just bought my new iphone yesterday, for some reason, it keep restarting it self every few minutes. i dont know why? please some body tell me what could be the cause of this?
    shall i return it back to Apple disributer?
    thanks

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download
         Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
         Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • My iPod touch keeps stopping every 45 min's when listening to the radio via an app. What to do?

    I listen to the radio via an app on my iPod touch, but every 45 min's or so the whole program stops and I have to reactivate the app, which is difficult in the middle of the night! Wifi connections is ok, iPod also fully charged. Please can anyone help me to sort this out? thanks!

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Restore from backup. See:
    iOS: How to back up
    Restore to factory settings/new iPod

Maybe you are looking for

  • Integration w/ Mac OS & MobileMe when using Referenced Library?

    I have perused the threads that get into the Managed vs Reference debate. My question: If I switch to referenced system and move my original files off my MBPro, what do I give up in integration with Mac OS and MobileMe? I love being able to use the "

  • Business Scenario on EBP,ROS and SUS

    Hi friends can any one send me a business scenario document so that EBP, ROS and SUS exist Please mail to vinaykrishna007 at gmail Regards Krishna

  • NullPointerException When trying to Get Session Scoped Bean data in another ManagedBean

    hello i wont to access to some data in my session scoped bean from a request bean so when i try to get this data all i get is  com.sun.faces.mgbean.ManagedBeanCreationException: An error occurred performing resource injection on managed bean «discuss

  • Need details for SAP USER-ID

    Dear All, I am Chartered Accountant and having 2 years of domain experience. I have completed my training from a small institute that is not SAP partner. I have very good hold on SAP FI and CO modules and want to appear for SAP FI certification. I DI

  • JTable - Can't add a TableModelListener

    Hi: I have created an Abstract jTable. When I add the line pointed out by this (<----)[near the middle], it won't compile and says that it cannot be applied here. I'd like to monitor the table for changes so I can programmatically adjust values in th