Macbookpro 5.1 SSD and RAM

I have a MacBookPro 5.1 and would like to change the disk to ssd and increase the ram. What is the maximum ram can i put and which disk ssd and ram ideal?
2.4 Ghz Intel Core 2 Duo
2GB 1067 MHz DDR3
The ram has to be 1067MHz or can be 1066 or 1333?
Thank you.

You can install up to 8GB of RAM - make certain that it is the correct RAM - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMMs. I would suggest either OWC or Crucial for good Mac RAM.
As for an SSD, most available now are 6.0 Gbps (SATA III) and your machine only has a 3.0 Gbps (SATA II) bus. Nonetheless, SATA III is backwards compatible with SATA II.
See my one and only user tip about upgrading to an SSD -> https://discussions.apple.com/docs/DOC-4741.
Good luck,
Clinton

Similar Messages

Lenovo Yoga 11s SSD and RAM Upgrade - Great Results

Picked up a Lenovo Yoga 11s from Best Buy. I chose Best Buy for price, color, and processor. They had a slightly better deal than Lenovo.com. The clementine color looks great. Quality is great. I'm very happy with the purchase. It has the i5 processor, 4GB RAM, 128GB SSD.
I upgraded the SSD and RAM and found the upgrade relatively easy. Here is a basic step by step and results. (note the parts I chose increased the cost by close to $400. I chose these parts based on quality, performance, and power usage. There are cheaper alternatives, but I wanted an upgrade and money was not my concern.)
Upgraded Parts
RAM - Patriot Memory 8GB PC3-12800 1600MHZ CL11 1.35V - Purchased at Newegg, but could have saved a couple dollars on Amazon.
I chose this part based on previous experience with Patriot and the low voltage RAM. A lot of the RAM is higher voltage and I wanted to make sure I reduced heat and power usage. When you look for 1.35V RAM, there are not a lot of options...
MSata SSD Drive - Intel SSD 525 Series 240GB Drive
Intel SSD Page
I purchased through Newegg
I chose the Intel drive based on previous experience with Intel. They cost more, but I've found their performance to be good and reliability good. There is also a good review on this drive on Tomshardware Tomshardware Intel 525 Review. Toms review shows top performing drive and low power. I also looked at many other manufacturers and Intel had the lower power consumption. This means less heat and longer battery life.
Cloning Software
Intel provides a free cloning software from Acronis
My Digital SSD MSata external case
I purchased through Newegg.
Nice quality device. I used this to help in cloning the OEM SSD to the new Intel drive.
T5 Torx Screw Driver
I purchased this from Home Depot T5 Torx Home Depot
I read all the reviews, posts and issues around cloning the Win8 SSD drives. Many people have/had issues. I was prepared for problems. Another reason I chose Intel, as they have migration software that I felt would be top notch.
You need to have the Hardware Manual handy. I read how to remove keyboard and top cover. This is required to upgrade RAM and SSD. It was very easy. Take your time. Note, this is very different than the Yoga 13 youtube video for part removal. I think it's easier. Here is the link to download manual Yoga 11s Hardware Manual.
How to clone your SSD
I expect if you're doing this project you can learn how to use the Intel software for cloning. Read the web, watch their youtube video. Read the manual...
Remove your factory SSD and insert new Intel SSD (note, you must insert Intel drive in notebook for cloning. Do not try and clone on the USB external drive. Intel software will not detect drive properly). Create a bootable version of the Intel software on a USB drive. Install your factory OEM SSD in the external MSata SSD drive. Go to BIOS and set boot to support legacy, no fast boot, boot to USB.
Boot to the Intel Acronis app on the USB drive. Then connect your OEM SSD via second USB port.
Then follow the wizard on Intel's software. Cloning process took less than 5 minutes.
Unplug your USB devices, go to BIOS and set all all your boot settings back to factory UEFI, fast boot etc.
The PC booted to windows second try. The first time it said it has issues and went through a process to repair. It then said it failed. I rebooted again and it went straight to windows. Did all my windows updates and everything is fine.
Performance
Windows Performance Improvement
Memory - Factory score was 5.9 - Patriot Memory is 8.2 *** Nice Improvement
Hard Drive - Factory score was 6.2 - Intel 525 Drive is 8.2 *** Nice Improvement
This pc is crazy fast booting and shutting down. It boots in 7 seconds. Not sure it's really faster than OEM, but I've never seen a pc boot this fast.
Over all performance is fast. I installed Office 2010 pro from a USB drive in under 5 minutes. Web browsing is crazy fast. I'm super impressed with the speed of this pc. Much faster than I expected.
Size, Shape, Weight, color is great. Performance is great. Happy with upgrades and quality of parts. May be my best notebook purchase to date. I don't have any battery life numbers to report yet. Everything is new and I haven't really spent much time off the charger.
Issues I've experienced during this upgrade of parts
I first tried to clone the SSD drive by putting the Intel drive in the USB enclosure first. The intel software would not work as the PC detects the external SSD drive as a SCSI drive and Intel cloning software could not identify the drive as an Intel Sata drive. I called Intel and they had no advice or help. I also tried a few other cloning softwares that ultimately did not work. As a last resort I switched the drives and everything worked great. Lesson learned, swap the drives first and use Intel software to clone.
Factory restore - doesn't work. Not sure why the factory restore is not working on my new Intel drive. Windows works great! All the partitions are there. I suspect I messed up the OEM restore portion of the drive. At one point I thought I had booted to the Intel drive, and tried the restore (I had about 7 failed cloning tries before the final one worked as I outlined above). It went through the restore process and then failed. However, what I later found was that I had actually booted to the OEM drive in the external USB case and I may have corrupted the restore functionality.
I contacted Lenovo Support and explained I could not restore using the 1 key restore. They walked me through some basic troubleshooting and then opted to mail me factory restore disk. I have the disk and will keep them available for when/if I ever need to restore.
Solved!
Go to Solution.

I upgraded from the Yoga 13 to the 11S and am happy to report that the machines are so identical that apparently you can just yank the SSD from one and drop it in the other. I had upgraded my 13" to 240gB SSD + 8gB RAM and simply plopped the two components into the 11S and after about 30 seconds of Windows alerting me that it was 'setting up devices' the machine booted normally and has been working perfectly since!

Finally got my ssd and ram, any pre/post installition advice?

After having looked at various places on the internet, I finally got 8GBs of 1066mhz ram and 128 gb SSD of Transcend and OCZ make, respectively. I'm going to install it on my MBP 13inch tonight. its 12.40 AM here and I shall be waiting for the final pre and post installition adivce from you fine geeks out there!
What I'm planning to do...
I've made a recovery disk of Lion on a pen drive. After a TM backup i'm gonna install the SSD inside the MBP, clean install Lion using the recovery disk, start a fresh copy of Lion. Then I'm gonna selectively load stuff from my old hdd to the new one that i would want on the SSD, using a USB to Sata 2 cable.
I have still not opened the packing. Just to confirm... Sata has to be sata 2 for the ssd and ram should be 4gb x 2 of 1066 mhz for my machine right?
dont forget to also give ur pre/post installition advice. Like the TRIM enabling etc....
Neerav

AceNeerav wrote:
dont forget to also give ur pre/post installition advice. Like the TRIM enabling etc....
Neerav
MacFixIt Tutorials
MacBook Pro: How to remove or install memory
Do-It-Yourself Laptop Repair
Research YouTube's 'How To' video tutorials

T450s SSD and RAM Upgrade Wont Work

Hey guys, I have a T450s and tried to upgrade the memory from the stock onboard 4gb to a total of 12gb, I disabled the internal battery and seated the RAM. When I went to turn the machine on though, the keyboard lit up as if it were going to start, but then it just gave me a black screen, no chance to enter the bios or anything. When I take the RAM stick out though the machine boots fine.
Now this is my second problem and probably the bigger one. I also tried to install an SSD because my system just has the 500gb hard drive. I had a Samsung 840 Evo, and when I put that in the system didnt recognize it it at all, the bios only showed the 16gb sandisk that was already in the system. I took the SSD out and reinstalled the HDD, but now that isn't showing up in the bios either, so the only working storage I have is the 16gb ssd in the system. Can anyone help me out with this mess?
Here's the RAM I bought:
http://www.amazon.com/gp/product/B006YG8X9Y/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Edit: I also tried my SSD and the HDD in my desktop and both work fine.

Hi nickoarg,
I'm not disputing your experience at all. However, SSDs get installed in ThinkPads all the time, and legacy mode just isn't necessary to get them to show up.
More likely it's some kind of incompatibility that's masked by legacy mode. Or just random coincidence...
I've noticed with several of my SSD installs (Crucial, mostly) that the drives are invisible until they finish some kind of internal housekeeping. In fact that just happened with the T450s and a CrucialM500. First it didn't show up in the boot menu, then threw a 2100 error, then showed up and is behaving fine just now.
Again, I believe what you're saying about your situation but it should not be necessary to use legacy mode for an SSD.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

What kinda SSD and RAM do I need to upgrade on my MBP 15" i7, Mid 2010

Hi I need help to upgrade to SSD and stronger RAM on my MBP 15" i7, mid 2010.
I like to know where to buy about 500GB SSD and I wanna 8 GB RAM(I think that is the max) on my MBP.
What is the best of Samsung or Crucial?
Hope somebody can help me out.
Thanks a lot
Best regards
Hay Duong

Look at the owc or crucial website for all you need.
http://www.macsales.com/
http://www.crucial.com/

Macbook upgrade ssd and ram

hello i have macbook early 2011 15 inch can i upgrade the ram from 4 gb to 16 or i can't and which kind of ram can i use like 1333 mhz or 1600 mhz and which ssd work with my macbook i forget say my presser is 2.0

Memory can be:
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
You can install any SATA SSD you want and can afford. Visit OWC and DataMem for memory and drives as well as Crucial.com for memory.

Upgrade of my T400 with SSD and RAM

Hi guys,I have Lenovo T400, Model type: 6473-58G (NM758MC) and I am thinking about upgade of the laptop (if possible): 1) SSD disk - is it possible? If yes, should it be SATA, SATA II or SATA III SSD? If possible, can I use both, i.e. the old HDD as a data disk and a new one SSD with OS installed on it? Can you recommend some type? 2) RAM - I have currently 2GB - is it possible to upgrade? If yes, what is the maximum RAM? Can you recommend some type? Thanks a milion!

Perfect! 1) Maybe it is not the newest piece, but please remember that my T400 works only with SATA I maybe SATA II, so I guess I don`t need any new arrival. What do you think? I can get this Kingston for 65 USD (120 GB). 2) Is this caddy fine for me? http://www.ebay.com/itm/For-Lenovo-ThinkPad-T400-T500Ultrabay-Slim-SATA-2nd-Hdd-Hard-Drive-Caddy-Module-/281671637457?pt=LH_DefaultDomain_0&hash=item4194f019d1.
= my question, can I put the current HDD into the caddy and run it as a second disk? 3) I have troubles with finding DDR3 1066 MhZ non-ECC. Can you find some for example on amazon? Or what do you think about this one? http://www.ebay.com/itm/NEW-Samsung-4GB-DDR3-1066MHz-204Pin-PC3-8500-Laptop-Memory-SO-DIMM-RAM-NON-ECC-/161643111699?hash=item25a2ae2513 Is is safe to buy such stuff on ebay? Thanks a milion!

Problems after SSD and RAM install

Model Name: Mac mini
Model Identifier: Macmini6,2
Processor Name: Intel Core i7
Processor Speed: 2.3 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 16 GB
Boot ROM Version: MM61.0106.B03
SMC Version (system): 2.8f0
     I just recently installed 16GB of Kingston RAM rated for Mac use. (MACMEM 2x8G|KST KTA-MB1600LK2/16G R) and SSD (Crucial MX100 CT512MX100SSD1 2.5" 512GB SATA III MLC Internal Solid State Drive) I used Carbon Copy to back it up at first, then I tried Time Machine.
     What it seems to be doing is hanging at the startup loading screen (until I zap the PRAM or restart it several times with the button) it also won't wake from sleep every few times. It has been a super intermittent problem. I put all the hardware into my Macbook Pro late 2011 and it ran just fine with no hickups. Also tried putting the hardware back to stock in the Mini and it was still doing this. This morning it restarted itself from an error which I will post down below.
     I would greatly appreciate any input to what could be going on here. Thank you.
Anonymous UUID:       9DC0979B-7323-105C-AF5D-421B430E010E
Thu Nov 13 08:26:18 2014
*** Panic Report ***
panic(cpu 0 caller 0xffffff8005fc4594): "launchd died\nState at Last Exception:\n\n"@/SourceCache/xnu/xnu-2782.1.97/bsd/kern/kern_exit.c:361
Backtrace (CPU 0), Frame : Return Address
0xffffff81efc3be50 : 0xffffff8005b3a811
0xffffff81efc3bed0 : 0xffffff8005fc4594
0xffffff81efc3bf40 : 0xffffff8005fc425c
0xffffff81efc3bf50 : 0xffffff800604dcb2
0xffffff81efc3bfb0 : 0xffffff8005c3ac46
BSD process name corresponding to current thread: launchd
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:     0x0000000005800000
Kernel text base: 0xffffff8005a00000
__HIB text base: 0xffffff8005900000
System model name: Macmini6,2 (Mac-F65AE981FFA204ED)
System uptime in nanoseconds: 868200991526
last loaded kext at 9570241423: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7f86711000, size 69632)
last unloaded kext at 143412312469: com.apple.driver.AirPort.Brcm4331 800.20.24 (addr 0xffffff7f8766a000, size 2043904)
loaded kexts:
com.apple.filesystems.msdosfs 1.10
com.apple.driver.AppleBluetoothMultitouch 85.3
com.apple.driver.AudioAUUC 1.70
com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.14.37
com.apple.driver.ApplePlatformEnabler 2.1.0d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.driver.AppleMikeyDriver 266.5
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleIntelHD4000Graphics 10.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleIntelFramebufferCapri 10.0.0
com.apple.driver.AppleIRController 327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleSDXC 1.6.5
com.apple.driver.AppleUSBHub 705.4.1
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AirPort.Brcm4360 900.19.8
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBXHCI 705.4.14
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 175.5
com.apple.driver.AppleHIDKeyboard 175.5
com.apple.driver.IOBluetoothHIDDriver 4.3.0f10
com.apple.driver.AppleMultitouchDriver 260.30
com.apple.iokit.IOSerialFamily 11
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 266.5
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOSurface 97
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.driver.AppleHDAController 266.5
com.apple.iokit.IOHDAFamily 266.5
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: Macmini6,2, BootROM MM61.0106.B03, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, SMC 2.8f0
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0198, 0x393930353432382D3038372E4130304C4620
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0198, 0x393930353432382D3038372E4130304C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x10E), Broadcom BCM43xx 1.0 (7.15.124.12.8)
Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Crucial_CT512MX100SSD1, 512.11 GB
Serial ATA Device: APPLE HDD HTS541010A9E662, 1 TB
USB Device: USB3.0 Hub
USB Device: Hub
USB Device: Hub
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: IR Receiver
USB Device: USB2.0 Hub
Thunderbolt Bus: Mac mini, Apple Inc., 23.4

No. almost all 2012 Mini come with the rotting HD installed in the lower bay, the one nearest the top when you flip the Mini over to do the replacement. Some users have reported problems with installing an SSD in the normally empty upper bay for which you have to use a third-party cable. No one is sure why some do not work.
I have a 2012 Mini and moved the original HD to the upper bay and installed the SSD in the lower bay and only has a problem with loose cable connection to logic board after I moved the Mini some time after the installation.
LexSchellings wrote:
I am not 100% sure but I seem to remember that you better install it in the upper bay.

New SSD and RAM, fan running fast/hot.

I updated my wives MBP w/ 8GB of ram and an EVO 840 SSD. All is working fine but the fan is non stop and running hot. Does anyone see any issues?
treCheck version: 1.9.15 (52)
Report generated September 27, 2014 at 7:30:47 PM CDT
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
8 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 0:5:16
Disk Information: ?
Samsung SSD 840 EVO 250GB disk0 : (250.06 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Samsung EVO SSD (disk0s2) / [Startup]: 249.07 GB (155.83 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.devguru.driver.SamsungACMControl (1.2.63 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.2.63 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungComposite (1.2.63 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.2.63 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.2.63 - SDK 10.6) Support
Startup Items: ?
HP IO: Path: /Library/StartupItems/HP IO
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.bombich.ccc.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[running] com.genieo.completer.download.plist Support
[loaded] com.genieo.completer.update.plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ?
None
Internet Plug-ins: ?
LogitechHarmony: Version: 2.0 - SDK 10.7 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.1.0 Support
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
CouponPrinter-FireFox_v2: Version: Version 1.1.6 Support
JavaAppletPlugin: Version: Java 7 Update 51 Check version
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins ?
npBcsMcTcIO: Version: (null) Support
3rd Party Preference Panes: ?
Flash Player Support
Flip4Mac WMV Support
Time Machine: ?
Auto backup: YES
Volumes being backed up:
Destinations:
My Passport [Local] (Last used)
Total size: 297.74 GB
Total number of backups: 9
Oldest backup: 2011-11-02 04:14:14 +0000
Last backup: 2014-09-27 20:14:14 +0000
Size of backup disk: Excellent
Backup size 297.74 GB > (Disk size 0 B X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
99% Installer
66% mds_stores
31% mds
25% mdworker32
2% WindowServer
Top Processes by Memory: ?
475 MB Installer
202 MB mds_stores
131 MB com.apple.IconServicesAgent
90 MB softwareupdated
62 MB com.apple.WebKit.WebContent
Virtual Memory Information: ?
3.19 GB Free RAM
2.27 GB Active RAM
1.19 GB Inactive RAM
1.35 GB Wired RAM
1.44 GB Page-ins
0 B Page-outs

The RAM is definitely wrong, remove the newer DIMM's that you installed and replace with old ones, how the iMac recognises that there is 64GB blows me as it only supports half of that!
I don't know whether you got them from Crucial.com or a 3rd party retailer, but this time make sure you get the correct RAM, the Crucial site has a scanner to help you purchase the right RAM.
Here is the page to get your RAM from - http://www.crucial.com/usa/en/compatible-upgrade-for/Apple/imac-%2821*5-and-27-i nch%2C-mid-2010%29#memoryResults
Good Luck

Early 2008 MacBook SSD and RAM Upgrade Compatability

I have an early 2008 macbook running OS X 10.5.8. It has a 2.1 GHz Core 2 Duo, 1 GB 667 MHz DDR2, and a 120GB 5400 RPM drive. It’s model MacBook 4,1. Obviously, it could use some upgrades. It still works fine, but is just slow. I can’t afford a new one, and think I can still get some life out of this one. I am thinking about the following upgrades:
Samsung 840 EVO 120GB SSD - http://www.newegg.com/Product/Product.aspx?Item=N82E16820147247
OWC 4GB (2x2) Memory Upgrade - http://eshop.macsales.com/item/Other%20World%20Computing/5300DDR2S4GP/
Transcend USB 2.0 Enclosure for the old hard drive currently in it - http://www.newegg.com/Product/Product.aspx?Item=N82E16817349001
I also plan on putting OS X 10.7 (lion) on the new SSD, unless anybody thinks keeping it at Leopard or Snow Leopard would be a better choice, performance wise.
Does anybody see any compatibility issue with any of these upgrades, or have any suggestions as to better upgrades? I realize the MacBook can only support SATA I, so it won’t get the full SATA III benefit of the SSD, but it should still be a huge performance upgrade. Thank you for any help!

have you completed the upgrade yet? I also wanted to know. Someone is trying to trade me their 2008 MB Pro as well (for my Canon L lens), I think it's the 4GB already one and I also have a crucial SSD from my Dell that I can put in. I need to have the MB to run smoothly on PS CS6 & LR5 Please let us know what the results are. What do you guys thinkg? is it enough to run those smoothly?
Thank you

MacBook Pro 17" Hard Drive and RAM suggestions

Hi, I want to but the new 17" MacBook Pro with 3.06GHz processor.
I am still unsure whether to choose 4GB or 8GB RAM as well as whether to choose SSD or HDD.
This MacBook will be used to develop iPhone apps, so I would want to have it speedy. On the other hand, I do not want to pay very much extra to get a slight noticeable improvement in speed. What I mean by this is that if 4GB of RAM is more than enough to develop apps then I will most likely not see a huge difference between having 8GB or 4GB of RAM.
I would appreciate to hear some opinions about both SSD and RAM size and whether it is wise to upgrade considering current prices.
Thanks in advance,
P.S. I want to order Antiglare film. Does anyone know about any of its disadvantages, or is it a pure benefit?

For what you described you want to do, 4GB RAM is plenty, and a fast 7200 RPM drive is fine. As for the anti-glare, if you don't want the distraction of sometimes having to see light sources behind you or reflections, get the anti-glare. The glass/glossy screen has more vibrant colors and deeper blacks, but you will get some reflection some time. Your eyes learn to ignore that quite quickly, but some people don't like it.
Unless you're doing heavily intensive app development, and maybe doing video/audio, 8GB is not worth it, and the SSD is even more not worth it. iPhone apps are not that demanding in terms of pure power.
Bryan

Aspire R11 (R3-131T): Locating the SSD and other general upgrading questions

So, I managed to find the RAM with no problem, but I can't find the SSD. I'm starting to think it is just integrated into the motherboard, but at the same time, I'm told I can upgrade it.

Questions:
1) how do I upgrade the size of the SSD?
2) there is this small area next to the motherboard. The void is filled with a metal brace. Can a SSD be placed there? And if so, how would I connect it to the motherboard?
3) can the CPU or GPU be overclocked? I understand that there is no fans, so it would have to be minor overclocking.
4) is there a way to increase cooling, whether that be via fan or heat sink?
5) aside from the SSD and RAM, is there anything else that can be upgraded?

Super Slow MacBook Pro Running SSD (& 6Gb/ram)

I bought my Macbook Pro used, It is a 2009 model and it is 13 inches large. When I purchased this MacBook, the seller asked if I wanted his SSD installed and I have always been tought that SSD's are fast, so he took the Macbook pro into the back and installed the SSD and also he installed 6Gb of ram. I said thank you and never thought about it until about 3 months later and I am wondering why my Macintosh is being so, so, so, so, so slow. It takes about 10 minutes for Google Chrome to open and like 15 minutes for my Macbook to just boot. I have searched the internet about tweaking the SSD ever so often, but nothing comes up, but the person that I bought the Mac from said to Tweak the operating system for the SSD and I am not sure how to Tweak or even what he means by tweak the operating system
I called Apple and they didn't even know, either. So that is why I am here. Should I open my Macbook Pro and see what type of SSD it is and what kind of Ram it is and then contact the manufacture and say that it is not working proberly? Because my computer is ******* me off when I had an original macbook running 4Gb of Ram and a 250 HDD that worked like magic and it was brand new, but my friends insisted that i get a Macbook Pro, because a developer like me deserves more than a crappy peice of Sh*t, but I gave up Gold for a peice of Sh*t. So Please help I am in need.

You can get some information on the SSD and RAM if you open SYSTEM PROFILER>HARDWARE and look at 'Serial-ATA' and 'Memory'. I would still open the MBP and check out the components. Sorry but I know nothing about 'tweaking' a SSD.
Ciao.

Early 2013 Macbook Pro Retina 2.7 i7 512GB SSD and 16gb Ram with Serious Cuda Problems! Trying to teach Apple their Macbook Pro Retina isn't a Pro Jan. 11. 2015.

Apple replaced the logic board, wiped the computer, did a fresh instal of the OS, and also a fresh instal of all the programs during the beginning of 2015. The GeekBench scores are the highest of any of the similar computers (at least on the day of my testing). But here's what's happening. The Macbook Pro Retina has a GeForce GT 650m with Cuda Technology and it can't handle editing in Premiere Pro with Cuda Acceleration turned on. Open CL, a second form of graphic acceleration on the Macbook Pro, appears to be functioning properly.
At the Apple Store on 1-10-2015, I was told that since the logic board and the graphic cards have been replaced that there is nothing they can do and they recommend contacting Corporate. This comes after they told me to buy a new logic board and that that would solve the problem. This comes after Apple did not listen, for over a month, about the possibility that they didn't properly build a professional notebook computer.
The computer displays a black program monitor screen, at random times, when the user edits footage with Cuda Acceleration enabled. It used to lead to an entire system crash and/or a Premiere Pro crash before the operating system was completely re-installed. My solution, since I bought the computer, was to edit in Open CL... However, I've come to learn that there is a major difference in performance between Open CL and Cuda Acceleration.
For the Macbook Pro Retina, Adobe Media Encoder render times are about 20% faster with Cuda Acceleration than Open CL. The 2013 Macbook Pro Retina appears to be able to handle Cuda Acceleration in Media Encoder, but I have had a number of issues leading to program crashes on every project before the new logic board and operating system were installed. For over a year and a half, I actually never used Cuda Acceleration. Having sent every crash report and user data to Apple over that time, I truly expected an update of some sorts and it never came.
FYI: The latest Macbook Pro Retina uses the GeForce GT 750m... This is essentially the same graphic card that performs about 10 - 20% faster due to a new "boost mode." More importantly, it actually has the exact same number of Cuda cores. Having the same number of Cuda Cores means that the Cuda Acceleration is essentially the same when exporting or viewing video. To prove a point to Apple that their 2013 Macbook Pro Retina isn't functioning properly, I bought the latest computer with the 2.5 i7, 16gb Ram, 512gb SSD and I can honestly say that the 2014 model works perfectly fine with Cuda Acceleration turned on while editing in Premiere. I can also say that a proper render test proved the 2013 and 2014 model to be the exact same.
I'm new to this whole pay $2700 for a computer that your manufacturer didn't / can't test properly, so I will be contacting Apple and speaking with Senior Advisors, their Customer Support division, and will soon speak with their Corporate branch. I'm confident that the Early 2013 Macbook Pro Retina with a 2.7 i7 16gb Ram and a 512 SSD is nearly the same at rendering video and editing video, provided the Cuda Acceleration works, as their latest 2014 Macbook Pro Retina with the 2.5 i7 processor 16gb Ram, and a 512 SSD. It's truly a great computer and a great build, minus their current inability to properly test / diagnose their computer.
Knowing that the latest graphic card in the Macbook Pro lineup is essentially the same model, I feel that Apple is not directly looking into the viability and life span of their current Macbook Pro Retina product line. They can't test for performance issues relating to their graphic cards, so why consider buying from them when the end user is actually in a position to experience up to a 20% decrease in certain professional programs.
For future reference, I'd strongly urge other individuals to avoid purchasing Apple products if they offer Cuda Technology. In my opinion, Apple is an Open CL organization, at best, who is not responsibly manufacturing / producing computers that fit their organization's strengths. For a fact, they can't test their Cuda Technology and won't even attempt to address Cuda Acceleration errors for Apple owners (01-11-2015). I say this having walked out of the Apple Store on 1-10-2015 with virtually no support other than to contact Corporate.

Looks like a RAM issue.
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x000000000000000000000000000000000000
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x000000000000000000000000000000000000

HT201364 Hi I have just bought a new Mac Book Pro 15" Retina display with 256 SSD and 8G RAM. I had my info transferred form my Previous Mac Book Pro late 2011 to this machine. When trying to download Mavericks it says it cannot be loaded onto this machin

Hi I have just bought a new Mac Book Pro 15" Retina display with 256 SSD and 8G RAM. I had my info transferred form my Previous Mac Book Pro late 2011 to this machine. When trying to download Mavericks it says it cannot be loaded onto this machine? Strange as I have just downloaded Pages, Numbers and Keynote...free? Thanks and Regards
Brian

Welcome to Apple Support Communities
You already have got OS X Mavericks installed (the Keynote, Pages and Numbers versions available in the Mac App Store are only compatible with OS X Mavericks).
You have got a Late 2013 MacBook Pro, which uses a special OS X Mavericks version that is not available in the Mac App Store. This is the reason why the Mac App Store is not compatible with OS X Mavericks even if you are using it. This will be fixed in OS X 10.9.1, when your Mac uses the same Mavericks version as all other Macs.
Until then, you can reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718

Macbookpro 5.1 SSD and RAM

Similar Messages

Maybe you are looking for