MacBookPro and iPad connect to internet, but not iPod Touch

I have a MacBook Pro running 10.8.2
and a 3G iPad running 6.0.1
Both of these are connecting to WiFi and working correctly.
Also have 4G iPod Touch running 6.0.1
It used to connect with no problems, but no longer does.
I tried this, with no solution:
- Reset the iOS device. Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
Suggestions, please?
I want my iPod Touch back in use!

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe this problem. You are not giving much information.
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

Similar Messages

  • Hi i use the hp lap in connecting for internet but not open the bro

    hi 
      i have some problam in my laptop in connecting for internet but not open for broswer and not update for software  tell the solution

    Hi @jerry3 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Notebook and not getting to the Internet. First try just to reset the router. Unplug from the power wait a few moments and plug back in.
    Can get to safe mode with command prompt? F11 upon startup choose safe mode with Networking.
    Can you get to the Internet in safe mode?
    Please note remove any and all USB devices, and remove memory cards from the card reader slot. Disconnect all non-essential devices.
    You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
    I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
    Please let me know.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • How can I sync my iPhone and iPad to my computer but not have notifications on my computer?

    I want to be able to back up my ihpone and ipad to the cloud but not have any notifications on my computer. The reason being is that it is my husbands computer that I synced it to and now he is getting all of my pop up notification/reminders on his imac. Can this setting be turned off somewhere?
    Thanks!
    Courtney

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Airport express connects to internet, but not print server

    hello all. i hope someone can help me with this. 2 days ago, my wife was able to print using her ibook/airport expess setup. today, the network diagnostics has this message: "network diagnostics was able to connect to the internet but not to the server EPSON Stylus CX3800.pdldatastream.tcp.local. this could be caused by problems with the server, or an internet problem between this computer and the server." she says this happened when she turned it on. what could be causing this? any and all help welcome. mcrat

    You can reset the AirPort Express (AX) following the directions in Resetting an AirPort Base Station or Time Capsule FAQ.
    Then you can use AirPort Utility on your computer to configure the AX.

  • Bought an album on iPad, showing on iPhone but not iPod

    Bought an album on iPad, showing on iPhone but not iPod

    Missb12 wrote:
    It's an iPod 5th generation-is that why ?. No Internet on it so no option for iCloud.
    That is correct. If it is an iPod Classic 5th generation it doesn't connect to the Internet it can't download anything.

  • AE ppoe mode in AE only allows macbook pro and iMac to connect to internet but not ipad

    I just upgraded to  20MB DSL line and got a new Qwest Q1000 modem connected to an A Extreme.
    Since Qwest now has PPPoE, I set the Q1000 modem to bridge mode and turned off Wifi.
    Then I Set the AEx router to ppoe mode, entered my username and password from Qwest and all is well with all lights green.
    But... only my imac and macbook pro connect to the internet.  My ipad, my wife's macbook and an ipod touch cannot connect.
    According the Airport Utility, all these devices are detected by the wifi network and they have their own  unique IPs provided by the AEx router (in pppoe mode)   10.0.1.7,   10.0.1.9 and so forth, no ip conflicts detected, all the lights green with full access to the internet. Again, only  my iMac and my macbook pro actually connect to the internet at full speed.
    Does any one know why some devices connect to the internet while others are not able to...
    Again, no errors detected anywhere, all modem and router lights green.
    Any help is welcomed.
    Janickk

    Thanks for the reply.  Your suggestion did not work.  Apparently there is an issue with DNS addresses.
    The Airport Extreme in pppoe mode  sets the router and DNS addresses to be the same 10.0.1.1.  Some devices (like my macbook pro and iMac) ignore this DNS value or use a different  (unknown) and then they connect to the internet perfectly.  But the devices (ipads and ipods) aquire and set both values (Router and DNS) to be the same, (10.0.1.1 and 10,0.1.1) wont connect to the internet until I manually  changed the DNS address in the DNS field.
    Question: are these two values supposed to be the same/different/ in both fields in the AExt in pppoe mode?
    Thanks
    Janickk

  • IPad connects to network, but not internet, and it was working fine yesterday

    So yesterday it was working fine, conecting to the internet and the router, then all of a sudden 'Safari cannot load the page because it is not connected to the internet', it was the same for all the apps that needed internet.
    My 4th generation iPod touch connects fine and so do other wireless devices on my network, what went wrong and how can I get  my internet back!??
    I have tried resetting the connectivity settings, resetting the router, adding the MAC address of the iPad to my routers 'Safe List' (which it wasnt on before it stopped working), and tried turning on and off the iPad.
    So what can be done to fix this?
    Thanks in advance

    seananners wrote:
    Ok. So after tweaking my IP settings no luck.
    Then I set up a Static route then put it into the settings on the ipad under 'static' and finally it works!
    A lot of hassle for such an annoying problem but I still have no idea why it didn't connect in the first place!?
    You found a work-around. Can't argue with success but you have not solved your problem. You should continue trying to get it to work via dhcp and dynamic addressing.

  • New Ipad Connecting to WiFi but NOT the internet

    I have the new iPad (3) and had it set up fine to connect through WiFi.  Recently I activated the Verizon LTE account and used it while on a trip.  Since then, my iPad will not connect to Wifi any longer.   I have tried the following:
    -Forgotten the network and tried to log in again fresh...Will connect to my airport extreme but will not connect to internet (Airport utility shows green lights everywhere except for internet, I show a full signal but the wheel just keeps spinning)
    -Reset the network settings, same effect
    -Reset the entire iPad, same effect
    now I am to the point where I have to setup the iPad again via iTunes because it will not connect to the internet via WiFi
    I have reset all modems and routers to factory settings and it still doesn't help.
    Throughout all of this I am still able to connect to the internet via my airport extreme AND internet using two iphones, apple TV, my mac, and my pc. 
    Hoping for a solution on here, otherwise it looks like a day at the "genius" bar.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • Apple AirPort WiFi connects to MacBook Air and iPad but not iPod Touch

    I got my iPod touch 4th Gen in December for xmas and the wifi has worked perfectly fine until about a week ago only on my ipod, it just says 'Unable to Connect' everytime I try and connect but works on my MacBook Air and iPad
    It's a WPA2 Personal security
    I've tried all the suggestions on the Apple Support page, including resetting the network settings

    Does the iPod connect to other networks?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • IPad connect to internet but nothing works

    I bought an IPad 2  in USA as a gift for my parents who live in Peru, they took it there and now they have a problem. The only app they can use is Skype, everything else does not work, not safari emails, app , nothing, it is conected to internet, it has strong signal  but when they try to use safari or emails or other apps it says is not conected to internet. we use Skype webcam without a problem, but thats it.  We have tried everything, connect and disconnect, reset it twice, but nothing . please help!

    What did they reset, the ipad or the router?
    What iOS version is installed? (Settings, General, About, Version) 5.1.1 is the latest. Updating it to this, if not already done might help!

  • Connects to internet but not local network

    My AX worked fine for the past year. While traveling I disconnected the AX and set the wireless mode in Airport Admin Utility to 'Wireless disabled' and then connected an iMac by ethernet wire for our housesitter. All worked well. On my return I plugged in the AX and reset the Wireless Mode to 'Create a Wireless Network (home router)'. All appeared to work well for the past week. Until today.... when I tried to print wirelessly to a printer connected to my server in the office outside our home. The MacBook Pro was unable to find the printer or the server. It was formerly able to this with no problem.
    The MacBook Pro can connect to the internet by the AX but not to my local network.
    When I choose 'connect to server' from the Go menu I'm unable to locate the server. I determined that if I enter the local address in the 'server address' window I am able to connect but remain unable to print. My former protocol was to choose the 'browse' button and choose from a list of possible computers (their are a number of Macs possibly on the network).
    If I take the MacBook Pro across the driveway to the office and plug into my network the computer finds the server and the printer with no problem.
    I've done a hard-reset twice - to no avail. And attempted a factory default re-set 3x but don't believe it worked since the green light didn't flash 4x as expected - it came on briefly and then turned amber while it re-started, but when I used Airport Set up Assistant all my former settings were there and the same password I had entered so I don't believe it reset to factory defaults.
    Yow!
    I'll really appreciate any assistance.
    paul sokal

    Thank you for sharing your experience. I am sure linksys will take care of bug(if any) you mentioned.

  • MacBook can connect to Internet, but not iMac

    Using two Airport Expresses as a WDS network. Had to reset network. Now Network is back up. MacBook can see it just fine and connect to the internet. iMac see's it, but can't connect to internet. I also opened up Airport Utility on iMac and it can't see either airport express...
    Any idea's?

    Also, in network preferences, it shows Airport "Not Connected". But I can see my MacBook on the network.

  • IMac Connects to Internet, but not File Server

    Got one iMac (Core 2 Duo, OS X 10.5.8) that has a network issue. It can always connect to the internet, but sometimes it stops seeing a file server on the network (Tiger server). The server connection will drop out on this computer, but not on any of the other computers on the network. Things I've tried that don't work:
    - restarting computer
    - re-seating ethernet cable
    - trying new ethernet cable
    - zapping PRAM on computer
    The connection to the server just comes and goes randomly, but only on this computer. Suggestions? Thanks!

    Same here with an iMac 27" connecting to a windows server.

  • WiFi Direct to Officejet or connect to Internet, but not both

    My PC is running Windows 7 Professional. I have  HP 7610 that includes the WiFi Direct feature allowing for a PC or other device to establish a WiFi connection to the printer without using a router. Pretty nice feature, however, the software setup establishes a separate "network" for the PC-to-printer connection from that used to connect to the Internet. So, in order to print I have to disconnect from the Internet and connect to the printer's network connection, then reverse that when done. It's akin to virtually plugging and unplugging phone lines!
    I have attempted using Win 7's Microsoft Virtual WiFi Miniport Adapter via CMD line instructions, see  http://community.spiceworks.com/how_to/show/897-how-to-set-up-virtual-wifi-in-windows-7, and though that does enable the virtual WiFi connector and create a secure network connection to the printer, it does not seem to allow me to access the Internet and use the printer at the same time.
    Any ideas, or am I stuck until a router enters the fray?

    This will work for you.
    Connect wireless printer anywhere, convert from wired, bypass failed radio, add WPA2 security.
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Connect-your-wireless-printer-when-away...
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Mac Pro will connect to internet but not network with other systems

    I have an iMac in my studio reception and a Mac pro and Macbook in my office. All three systems can connect to the internet but the Mac Pro has stopped networking with the iMac. However the iMac can network with the Pro. I have an ethernet cable connection to the Pro (no wi fi card) and I have a wireless router on the iMac which has enabled me to connect the Pro to other systems through wi fi. I also have a PC laptop and the Pro can connect to it via wi fi. Everything was networking properly several weeks ago and as far as I am aware I have not changed any settings. Does anyone have any suggestions on how to resolve this annoying little problem.

    Hello there, WoodenToy.
    The following Knowledge Base article offers extensive troubleshooting steps for troubleshooting your issue:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Although the entire article is a great resource you may want to focus on the section entitled: "Symptom: My Mac does not connect to the Internet".
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for