Macbookpro can't recognize bootable usb at boot time?

I have an old macbookpro:
Model Name: MacBook Pro
Model Identifier:   MacBookPro6,2
Processor Name: Intel Core i5
Processor Speed:    2.53 GHz
Boot ROM Version:   MBP61.0057.B0F
I created a windows usb with bootcamp assistant, "Create a Windows 7 or later version install disk" with a windows 7 ISO image.
I went through bootcamp's "Install or remove Windows 7" option and partitioned 21GB from my harddisk for my windows partition (it's named "BOOTCAMP", MS-DOS (FAT)).
I plugged in my usb and restarted my laptop. I pressed option during boot to go into the boot menu. Somehow, my usb stick doesn't show up in the boot menu. I only see my normal boot partition and a recover partition. I tried removing the USB stick while I am still in that menu and plugging it back to see if that will fix the problem. It did not.
Strangely, I noticed that my USB stick does not light up when I unplugged it and reinserted it when my mac is in the boot menu. Normally the usb stick will light up when inserted into this usb port.
I thought my ISO is not bootable so I tried another windows 7 ISO and the results remain the same.
Is it possible that my model is too old such that it doesn't allow booting from USB during boot time? Is it possible that older ROMS do not check for USB drives during boot time (hence explaining why my usb doesn't light up)?
I can assure you that my usb port is functioning correctly (at least during Mac OS X run time).

That's correct. The DVD drive is the SuperDrive. Unfortunately, you need the original SuperDrive in your computer in order to install Windows, and it's not possible to upgrade the firmware because only Apple provides updates.
If you haven't got the SuperDrive, you have to buy one and install it again. Fortunately, there's a solution because iFixit sells the original SuperDrive which came with your computer > http://www.ifixit.com/MacBook-Parts/MacBook-Pro-15-Inch-Unibody-Mid-2009-Mid-201 0-Early-2011-8x-SATA-SuperDrive-Used/IF161-033?utm_source=ifixit_guide&utm_mediu m=guide_intro&utm_content=required_items&utm_term=macbook_pro_15%22_unibody_mid_ 2010 It's expensive, but it's the only solution.
To install the SuperDrive, you can follow this how-to > http://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Mid+2010+Optical+Drive+R eplacement/3074/1

Similar Messages

  • TS4517 Macbookpro can't recognize bootable usb at boot time

    I created a windows usb with bootcamp assistant, "Create a Windows 7 or later version install disk" with a windows 7 ISO image.
    I went through bootcamp's "Install or remove Windows 7" option and partitioned 21GB from my harddisk for my windows partition (it's named "BOOTCAMP", MS-DOS (FAT)).
    I plugged in my usb and restarted my laptop. I pressed option during boot to go into the boot menu. Somehow, my usb stick doesn't show up in the boot menu. I only see my normal boot partition and a recover partition. I tried removing the USB stick while I am still in that menu and plugging it back to see if that will fix the problem. It did not.
    Strangely, I noticed that my USB stick does not light up when I unplugged it and reinserted it when my mac is in the boot menu. Normally the usb stick will light up when inserted into this usb port.
    I thought my ISO is not bootable so I tried another windows 7 ISO and the results remain the same.
    Is it possible that my model is too old such that it doesn't allow booting from USB during boot time? Is it possible that older ROMS do not check for USB drives during boot time (hence explaining why my usb doesn't light up)?
    I can assure you that my usb port is functioning correctly

    I have the same issue on a late 2013 Macbook Pro 15inch. I booted into Recovery mode, and selected to install new Mavericks, and chose my USB drive as the target.
    The installer correctly downloads to the USB, and the bootable USB works fine on my old 2010 macbook pro. However, the USB drive does not show when i boot with option pressed. It is as if the Macbook just dont permit booting from USB - eventhough the drive was created on the very same mac.
    Anyone have a clue as to how to boot from USB?

  • HT5634 I already install bootcamp 5 on my Macbook Pro MD101 (Mid 2012). But when I plug the USB, my Mac can not recognize the USB or any Storage device. Pls help

    I already install Bootcamp 5 on my Macbook Pro MD101 (Mid 2012) but when I plug the USB, my Mac can not recognize the USB, also any storage device. Pls help !!! I am using Window 7

    I ran an Apple Hardware Test, says ''No trouble found'.

  • Does not recognize bootable usb

    My HP laptop does not recognize some bootable usb devices in the boot menu.
    I have a HP tower and the laptop in my office and the tower will recognize and boot the a USB device that the laptop will not recognize in the boot menu.
    Laptop: HP Pavilion dm1z-4100, BIOS HP vF.19 2/4/2013, Windows 7 Pro 64bit
    Tower: HP HPE-480t, BIOS American Megatrends v6.10 9/16/2010, Windows 7 Pro 64bit
    Example of non recognized device in laptop (OK in tower): USB HDD WD60 OUE-22 HCTO
    The external HDD reacts the same as some memory sticks. All the boot devices appear to be syslinux bootable
    I have never found a non recognized bootable device in the tower PC boot menu, but several in the laptop PC.
    No problem with laptop using external CD/DVD drive
    The problem appears to be in the BIOS, because the boot menu occurs prior to the operating system.
    Latest BIOS listed in the updates is F.19 (same as installed)
    Any comments?

    Hi lrclost,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion dm1z-4100 Notebook and not recognize some bootable usb devices in the boot menu. Here is a link to secure boot.
    This document will explain the differences in boots.
    Hope this is helpful.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Can i make bootable usb of already made recovery disks?

    i have hp pavillion dv4 series laptop.I have already made its recovery disks,which i need now.But my cd/dvd reader is not working,so i want to make bootable usb of these three disks.Can i do it or is there any other way for me??

    sawsank,
    had it been obvious, I would not have asked the question. In a number of discussions here, people will often mention details that are not relevant to their goal, which is why I’d asked for clarification.
    A Boot Camp partition can only be created in an internal disk, so Boot Camp can be ruled out in pursuit of your goal. (Once created internally, it won’t be bootable if it is subsequently made external.) Short of virtualizing Windows 7 in one of your four bootable OS X partitions, I don’t know the answer for how you can achieve it.

  • Can i include external usb drives in Time Machine backups

    Can I include external usb drives and sticks in Time Machine backups?
    This was the question I searched a week for. My machine is a MBAir with Yosemite. I have a bunch of USB HD and sticks. This is a sharing of what it took to solve. I lost a couple of important document revisions lately because of not having differential backups on them, so wanted to include them in Time Machine.
    Yes it can, I found. But it's a wee bit backwards. And apparent inconsistencies drive you crazy. Time Machine is supposed to do this by default, and wants you to tell it what NOT to include. Trouble is, formats create many troubles.
    But the USB sticks and HD's you buy are PC formatted. And you'd like to share, as the Apple does with FAT16, FAT32, and exFAT (to overcome the 4G size limit on the others). Even NTFS can be plugged in and be read-only. Turns out you just can't incorporate into TM backups.
    Open Time Machine Options, and look at the drives listed in the exclusion window. Drives that you know to be plugged in and registered by Finder, may or not be registered in the exclusion window, and if registered and their icons may be bright or dimmed. Bright will NOT be included. Dimmed are excluded. Normally the operation is to use the or to exclude these drives from your next BU operation. (this instruction is lost the next time in manual mode). So if a drive or stick is shown and is bright it WON'T be backed up. If you it from the window, then it will grey out and WILL be backed up. If it's not there to offer you exclusion, you can browse to such a file or device so you can exclude it. TM's exclusion window will show the PC formats: FAT16, FAT32, and exFAT greyed out (as not included). NTFS is bright looking like it might work, but when    doesn't dim, it disappears, and is ignored in the actual BU.
    Sources are supposed to be included in the backup if it isn't shown bright in the exclusion window. In this respect I only use TM manually, and not for programmed BU's, so I cannot speak to that.
    If everything you have is formatted for the Apple disc system (Mac OS Extended) then there are no contradictions or partial equivalences. The mounted disc or stick will show in TM exclusions window, and if you it, you'll see it in the Time Machine pile of calendared directories, with all the files. And of course it will do the differential backups for it that we use TM for in the first place. Just remember to prepare the BU by not excluding.
    BUT NOW THE VARIABLES. It now depends upon the formats. I use the Paragon NTFS program to permit writing NTFS. (Apple can normally read but not write NTFS). Paragon is lovely because for normal computer use, I can read and write both Apple and PC files and disc formats in Finder (for 3 years now). But Time Machine cannot be reached by Paragon so it's NTFS behaviors are outrageous. Paragon reaches Disk Doctor so you can read, write, format and heal both Apple and PC formats. And this really confused things respecting Time Machine. I literally worked through every variable, from stick to disc to prove what did work, and when false appearances of working showed up.
    Respecting that very Time Machine display of Finder windows piled backwards through time there's a confusing bug. When first opened, TM shows NOW as the current setup and works just like a Finder window in present time. And the outboard discs and sticks show as in Finder. BUT working back in time, the left window DOES NOT SHOW THE CONDITIONS AT BACKUP but rather in all left windows shows the present setup. So you need to work from the right hand side dates and times to go back and see when you had that stick or HD plugged in. And then, finally, you will see the files you wanted saved. But if there is a stick on the left than TM doesn't like but Finder likes you'll see it left but nothing will be in the files. Clicking on the pretender just jumps to the root.
    My Disk Doctor provisions (with Paragon) show, Mac OS Extended (Journaled), Mac OS Extended (Case Sensitive Journaled), MS-DOS (FAT), exFAT, Windows NT Filesystem, Windows NT Filesystem (compressed). It's a better utility than in Microsoft and I use it for such maintenance.
    Bottom line, I like TM very much. 2 years ago I lost my air and TM was able to reconstruct my machine many times in the course of the troubleshooting - all the way from the start to the last without ever missing a beat or a file. So I accept this limitation and make copies to another HD formatted in NTFS when I work on PCs.
    Hope's this sorts out being lost in the desert for a few of you.
    Jock
    <Personal Information Edited by Host>

    Storing normal data files on the Time Capsule is unfortunately not as easy as dropping the folder on the Time Capsule.
    Open up Macintosh HD on the Mac
    Look for the SHARED heading on the left
    Click on the Time Capsule icon and a folder named "Data" will appear (unless you have renamed it)
    Double click the "Data" folder to mount the drive on the desktop. You may need to enter the device password for the Time Capsule when you do this the first time
    Once the drive icon is on the desktop, you can drag data to the icon and drop it there. Double click the icon to open up the drive and see the files

  • Can I make a usb to boot up mac from a pc?

    I was trying to delete partitions on my hard drive to get it ready for a clean Yosemite install. All of a sudden the screen went grey and after a considerable amount of time I turned off the MacBook Air and then turned it back on. A grey screen with a folder and '?' showed up. I don't have much experience with Macs, but I know enough that something happened to the Boot files. I don't have any other Macs. Is there a way to make a bootable drive on a PC? I have saved HD images on a portable hard drive along with time machine backup...I was running Lion OS

    You cannot make a bootable drive for the Mac on a PC. You may have lost your OS X partition in whatever your were doing. Connect your Time Machine backup drive to the computer. Boot the computer using OPTION boot:
    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the desired disk icon from which you want to boot.
      5. Click on the arrow button below the icon.
    The Time Machine backup should have a hidden copy of your Recovery HD from which you can boot the computer. When the boot manager screen appears look for a Recovery HD on the Time Machine drive and select it for startup. Once you can startup the computer you can see about what the problem is and repair it using Disk Utility, then restore your Time Machine backup if needed.
    If there is no Recovery HD image on your Time Machine backup drive, then try starting up from the one on your internal drive:
    Boot Using Command+R keys:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "COMMAND" and the "R" keys together.
      3. Release the keys when the Utilities Menu appears.

  • Can't mount /var/lock at boot time [SOLVED]

    I set up my fstab to mount /tmp /var/run and /var/lock to tmpfs. When I boot my computer /var/lock does not mount correctly. If I use mount -a after boot it mounts. How can I fix this?
    Last edited by namelessone (2010-12-05 01:49:30)

    dmesg doesn't show anything out of the ordinary. During boot I get the message along the lines of "failed to mount /var/lock" (it goes by really fast so I don't remember the exact wording)
    fstab says:
    tmpfs /var/lock tmpfs defaults,nodev,nosuid,noexec,mode=1777,size=10m 0 0
    tmpfs /var/run tmpfs defaults,nodev,nosuid,noexec,mode=0755,size=10m 0 0
    /dev/mapper/vol-var /var jfs defaults, noatime 0 1
    Last edited by namelessone (2010-12-04 19:57:18)

  • Can't copy TM usb backup to Time Capsule - "wrong case sensitivity"

    I tried Pondini's tip from here:
    http://discussions.apple.com/thread.jspa?threadID=1964018#18
    "18. How can I copy my TM backups to a different location?"
    "To copy LOCAL BACKUPS to be used on a NETWORK:
    SNOW LEOPARD: First, configure Time Machine to back up to the network location, and start a backup. As soon as the sparse bundle is created, cancel the backup. Then, if possible, connect the new drive directly to your Mac. Use the Finder to mount the new sparse bundle, and delete the Backups.backupdb folder inside it. Then drag the Backups.backupdb folder from the old volume to the new sparse bundle."
    My problem comes when I get to this point. I get an error message...
    "the volume has the wrong case sensitivity for a backup".
    ..and it won't let me drag the Backups.backupdb folder.
    The source is a Western Digital usb MyBook originally set up under Leopard but now being used under Snow Leopard. The target is a new Time Capsule.
    Thanks for any help you can offer.

    Bob Mayo wrote:
    Given this sudden issue, can the Time Machine backup on the MyBook drive be saved -- and is it still a reliable to use as the base for future backups on the Time Capsule?
    I wouldn't waste any more time on it; I'd recommend putting it "on the shelf," in case you find you need something from it, and let Time Machine start fresh on the TC.
    You can always access the old backups, via the +*Browse Other Time Machine Disks+* option, per #17 in the FAQ Tip.
    By the way, I've been working on the copy procedure. Here's a draft of the new version of the part you'd use, if you decide to:
    |
    |
    _*3. To copy LOCAL BACKUPS to be used on a NETWORK_*
    *SNOW LEOPARD only; you cannot convert Local Backups to Network on Leopard.*
    |
    If you're copying to a Time Capsule, configure your Time Capsule for your network. (See the documentation that came with your Time Capsule for information about setting it up on your network.)
    If you're copying to a USB drive to be connected to a Time Capsule, Airport Extreme, or other Mac, connect it directly to your Mac and format it with either the GUID or APM *Partition Map Scheme,* and either +Mac OS Extended (Journaled)+ or +Mac OS Extended Case-sensitive, journaled)+ Format. See item #5 in the Frequently Asked Questions *User Tip* if you need detailed instructions.
    a. Configure Time Machine to back up to the network location, and start a backup.
    b. As soon as the +sparse bundle+ is created, cancel the backup (that may take a few moments).
    c. If possible, connect the new drive directly to your Mac (or a Time Capsule via Ethernet).
    d. Use the Finder to mount the new sparse bundle.
    e. Double-click it to mount the +Time Machine Backups+ partition inside it.
    f. Click the +Time Machine Backups+ partition to open it, and delete the Backups.backupdb folder inside it.
    g. If the old backups are case-ignorant (per the yellow box above), you must change the new sparse bundle to be case-ignorant, too:
    |
    1. Select the +Time Machine Backups+ partition in Disk Utility's sidebar and click Erase.
    2. Select the +Mac OS Extended (Journaled)+ Format, and click the Erase button. That may take a few moments (to unmount, erase, and mount the partition again).
    3. Via the Finder, do a +Get Info+ on the +Time Machine Backups+ partition.
    4. Click the padlock at the lower right and enter your Admin password at the prompt.
    5. Remove the check from the +Ignore ownership on this volume+ box and close the window.
    |
    h. Via the Finder, drag the Backups.backupdb folder from the old volume to the new +Time Machine Backups+ partition. Enter your Admin password when prompted. After a few moments, you may also get a prompt saying that you'll need to enter it again later: click Continue.

  • Can I access multiple USB printers through Time Capsule?

    I just bought a Time Capsule, and I'm loving having my USB laser printer available on my Airport Network. In fact, I'm loving it so much that I'd like to have my USB photo printer available as well.
    Is it possible to have multiple printers available through the Time Capsule connected to a USB hub?

    Bingo! It worked, many thanks!
    I wish I could remember which associate at my Apple Store said it wasn't possible; that he'd tried every way he could think of short of hacking the Time Capsule.
    You've really helped increase the utility of my network, and I appreciate it.
    Happy Holidays!

  • Sudden restarts while using bootable USB installer (mid-2011 iMac) - evidence of hardware problem?

    Greetings:
    For a couple of years I've been suffering from an issue reported in many threads:  seemingly random shutdowns and restarts of my mid-2011 iMac.  These can happen several times a day, or there can be a gap of weeks between occurences.  I've searched the web and discussions.apple.com endlessly, and tried every conceivable solution.  I've observed no consistent pre-restart pattern in Console.  I've tried removing all unnecessary extensions and start-up programs.  Fixed permissions, repaired HDD, many of the diagnostic procedures described by LINC (superuser on this forum).  I would sometimes get temporary relief from periodic restart loops, by unplugging the computer and resetting PRAM, but this would not last long. I couldn't discern whether it is a software/conflict issue, or a hardware issue.  Have run AHT in extended looping mode, several times, and found nothing wrong.  Which caused me to keep thinking it must be a software issue.  The last thing I've tried is a clean install of Yosemite, with full HDD erase, from bootable USB.
    I did this successfully, restored files from Time Machine...but then a few hours later, a series of sudden restarts began, with 4 or 5 within a couple of hours. I decided to shutdown and restart using the bootable USB installer again, and run Disk Utility from it to check the HDD for errors.
    But then, while booted up from the USB (and after running Disk Utility with a normal result):  the computer suddenly turned off and restarted!  And then it rebooted again into installer mode (i.e. running off the bootable USB), and I ran Disk Utility again and ...it happened again!
    So what does this tell me?  I am asking all of you for confirmation please.  I am thinking this is a strong indication that whatever the issue is causing the restarts, it is hardware based, as the system was running off the bootable USB at the time, NOT using installed operating system or software.  AND this reminded me of one other instance where the system had rebooted randomly, while I was in SAFE mode.
    Would you agree that this is likely now pointing to a hardware issue?  Is power supply the likely culprit?  Or??  (and recalling that repeated AHT have showed nothing...).  Is it worth trying to fix (out of warranty)?
    thanks for any insights,
    Warren

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CSeq 'n Cause: -' | tail | awk '/:/{$4=""; print}' | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • Mac Pro can't recognize 1GB Pen Drives... How to fix it?

    Recently I keeps encountered the same annoying problem...
    My Mac Pro can't recognize the USB pen drives when I or my co-worker plug into Mac Pro's USB port.
    For a few times, if we are lucky, Mac Pro shows the pen drive on the desk top, but sometimes it can't read or write the data from/to the pen drive, many times, it simply freeze over.
    Does anyone knows how to fix such problem? It seems to me that the new Mac Pro still has some bugs needs to be sort out...
    Thanks in advance.
    KC

    Hi, Malcolm:
    Thanks for the post.
    No, my new Mac Pro system does not have USB port on the Keyboard, cause I've opted for Apple's wireless blue tooth mouse and keyboard.
    I do have 2 USB ports on the Apple's 23" LCD display, and Two USB ports on front side and two available USB ports on the back of the Mac itself.
    During the Thanksgiving long weekend, I think I might accidentally singled out the cause of my problem.
    I have my HP printer and one multi-card reader constantly pluged into the two USB ports at the back of my Mac, and always tried to use the front side USB ports for the 1GB USB Pen Drives, and that's where the problem lays!
    When I unplug the Multi Card Reader from the back USB port, and suddenly all USB ports on my Mac works just fine with the Pen Drives!!!
    So, for now, I plug the Multi Card Reader in one the the front USB port, and the rest of the USB ports on the Mac work with Pen Drives flawlessly, it seems that I sloved my problem for the time being...
    As for those two USB ports on the back of my 23" Apple Display, They can not take my USB Pen Drives, as you've mentioned that it does not have enough power for the USB Pen Drives.
    K C
    Mac Pro 2x3GHz Dual-Core Xeon, Power Mac G4 dual 1G MDD, 5G iPod 60G   Mac OS X (10.4.8)  

  • I want to "burn" a .dmg (windows 7 file) to a bootable usb stick

    I have a late 2008 Macbook Pro and the superdrive doesn't read or write any disks (a common problem with this type of syperdrive)
    I want to install the dvd with Windows 7 on my Mac and of course i can't because of my superdrive problem.
    I have converted the dvd to a .dmg file so that I can make a bootable usb stick.
    But I can't "burn" the .dmg image to a usb. I've tried many ways to copy it but unsuccessful.
    Can someone please help me?

    Welcome to Apple Communities
    If you use Lion, you can use Windows 7 Home Premium, Professional or Ultimate, 32 or 64 bit. You can't upgrade to a 64 bit Windows from a 32 bit, and to downgrade (Ultimate to Home Premium)

  • Boot time goes from seconds to minutes with udev and systemd

    A few weeks ago updated and saw that on reboot I was getting messages from systemd that it was waiting for all my LVM partitions, and then finally that:
    'A start job is running for udev Wait for Complete Device Initialization'
    This has never happened before and I can't find any information about it in dmesg.
    Here is my fstab:
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    # UUID=f9f12b36-2333-4c46-949a-0bd86e1ab254
    /dev/mapper/Linux-Arch / ext4 rw,relatime,data=ordered 0 1
    # UUID=21ee7aa4-234e-463d-af2a-6c4cb3551ea8
    /dev/mapper/Linux-Home /home ext4 rw,relatime,data=ordered 0 2
    # UUID=E421-470F LABEL=SYSTEM_DRV
    /dev/sda2 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
    # UUID=11bf5a3f-86a5-48b7-93da-994e39463f0d
    /dev/mapper/Linux-Swap none swap defaults 0 0
    # Windows
    # /dev/sda5 /mnt/Windows ntfs-3g defaults,ro,noauto 0 0
    I've been digging around for a few weeks and I can't find anything and my boot time is really slow.
    systemd-analyze blame:
    1min 1.644s systemd-udev-settle.service
    10.079s systemd-udev-trigger.service
    9.999s systemd-remount-fs.service
    1.003s lvm2-pvscan@8:8.service
    795ms systemd-timesyncd.service
    700ms systemd-update-utmp.service
    583ms systemd-sysctl.service
    560ms rtkit-daemon.service
    469ms udisks2.service
    449ms NetworkManager.service
    438ms kmod-static-nodes.service
    363ms systemd-vconsole-setup.service
    214ms tmp.mount
    184ms sys-kernel-debug.mount
    144ms sys-kernel-config.mount
    123ms systemd-tmpfiles-clean.service
    116ms dev-mqueue.mount
    90ms [email protected]
    85ms systemd-logind.service
    82ms dev-hugepages.mount
    79ms bluetooth.service
    57ms [email protected]
    42ms polkit.service
    31ms accounts-daemon.service
    31ms wpa_supplicant.service
    24ms systemd-fsck@dev-mapper-Linux\x2dHome.service
    20ms colord.service
    20ms gdm.service
    20ms upower.service
    19ms [email protected]
    18ms [email protected]
    17ms [email protected]
    15ms boot.mount
    12ms systemd-tmpfiles-setup-dev.service
    8ms dev-mapper-Linux\x2dSwap.swap
    8ms systemd-tmpfiles-setup.service
    8ms systemd-journal-flush.service
    5ms home.mount
    5ms systemd-user-sessions.service
    4ms systemd-backlight@backlight:intel_backlight.service
    3ms systemd-random-seed.service
    2ms systemd-udevd.service
    1ms sys-fs-fuse-connections.mount
    EDIT 2: Dmesg output:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.14.23-1-lts (nobody@home-andyrtr-arch64-chroots-testing-x86_64-andyrtr) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP Thu Oct 30 19:41:12 CET 2014
    [ 0.000000] Command line: initrd=\initramfs-linux-lts.img root=/dev/mapper/Linux-Arch rw resume=/dev/mapper/Linux-Swap pcie_aspm=force i915.i915_enable_rc6=1
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c4daffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c4db0000-0x00000000c61affff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c61b0000-0x00000000ca7befff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ca7bf000-0x00000000caebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000caebf000-0x00000000cafbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cafbf000-0x00000000caffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed98000-0x00000000fed9ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffcc0000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] e820: update [mem 0xc3217018-0xc3227057] usable ==> usable
    [ 0.000000] extended physical RAM map:
    [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000040005000-0x00000000c3217017] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000c3217018-0x00000000c3227057] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000c3227058-0x00000000c4daffff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000c4db0000-0x00000000c61affff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000c61b0000-0x00000000ca7befff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000ca7bf000-0x00000000caebefff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000caebf000-0x00000000cafbefff] ACPI NVS
    [ 0.000000] reserve setup_data: [mem 0x00000000cafbf000-0x00000000caffefff] ACPI data
    [ 0.000000] reserve setup_data: [mem 0x00000000cafff000-0x00000000caffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed98000-0x00000000fed9ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000ffcc0000-0x00000000ffffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000022f5fffff] usable
    [ 0.000000] efi: EFI v2.31 by INSYDE Corp.
    [ 0.000000] efi: ACPI=0xcaffe000 ACPI 2.0=0xcaffe014 SMBIOS=0xcaebef98
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
    [ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
    [ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000006f000) (0MB)
    [ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
    [ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
    [ 0.000000] efi: mem05: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
    [ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f62000) (15MB)
    [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001f62000-0x0000000020000000) (480MB)
    [ 0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x0000000040004000) (510MB)
    [ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000040005000-0x000000007fba4000) (1019MB)
    [ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x000000007fba4000-0x0000000080000000) (4MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000080000000-0x00000000c31c0000) (1073MB)
    [ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000c31c0000-0x00000000c31e0000) (0MB)
    [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000c31e0000-0x00000000c3217000) (0MB)
    [ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x00000000c3217000-0x00000000c3228000) (0MB)
    [ 0.000000] efi: mem18: type=1, attr=0xf, range=[0x00000000c3228000-0x00000000c418a000) (15MB)
    [ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000c418a000-0x00000000c4db0000) (12MB)
    [ 0.000000] efi: mem20: type=0, attr=0xf, range=[0x00000000c4db0000-0x00000000c61b0000) (20MB)
    [ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000c61b0000-0x00000000c61b8000) (0MB)
    [ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000c61b8000-0x00000000c61bb000) (0MB)
    [ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000c61bb000-0x00000000c61bc000) (0MB)
    [ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x00000000c61bc000-0x00000000c61bf000) (0MB)
    [ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000c61bf000-0x00000000c63a8000) (1MB)
    [ 0.000000] efi: mem26: type=1, attr=0xf, range=[0x00000000c63a8000-0x00000000c63bf000) (0MB)
    [ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000c63bf000-0x00000000c76e6000) (19MB)
    [ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000c76e6000-0x00000000c864a000) (15MB)
    [ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000c864a000-0x00000000c864c000) (0MB)
    [ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000c864c000-0x00000000c864e000) (0MB)
    [ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000c864e000-0x00000000c8650000) (0MB)
    [ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000c8650000-0x00000000c8697000) (0MB)
    [ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000c8697000-0x00000000c8699000) (0MB)
    [ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000c8699000-0x00000000c86cb000) (0MB)
    [ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000c86cb000-0x00000000c86cc000) (0MB)
    [ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000c86cc000-0x00000000c87ff000) (1MB)
    [ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000c87ff000-0x00000000c8803000) (0MB)
    [ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000c8803000-0x00000000c8806000) (0MB)
    [ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000c8806000-0x00000000c8807000) (0MB)
    [ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000c8807000-0x00000000c885a000) (0MB)
    [ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000c885a000-0x00000000c8882000) (0MB)
    [ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000c8882000-0x00000000c88b0000) (0MB)
    [ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000c88b0000-0x00000000c88b1000) (0MB)
    [ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000c88b1000-0x00000000c8c65000) (3MB)
    [ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x00000000c8c65000-0x00000000c8c67000) (0MB)
    [ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000c8c67000-0x00000000c8c78000) (0MB)
    [ 0.000000] efi: mem47: type=7, attr=0xf, range=[0x00000000c8c78000-0x00000000c8c7a000) (0MB)
    [ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x00000000c8c7a000-0x00000000ca3bf000) (23MB)
    [ 0.000000] efi: mem49: type=7, attr=0xf, range=[0x00000000ca3bf000-0x00000000ca435000) (0MB)
    [ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x00000000ca435000-0x00000000ca7bf000) (3MB)
    [ 0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x00000000ca7bf000-0x00000000ca865000) (0MB)
    [ 0.000000] efi: mem52: type=6, attr=0x800000000000000f, range=[0x00000000ca865000-0x00000000ca866000) (0MB)
    [ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000ca866000-0x00000000ca868000) (0MB)
    [ 0.000000] efi: mem54: type=6, attr=0x800000000000000f, range=[0x00000000ca868000-0x00000000ca869000) (0MB)
    [ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000ca869000-0x00000000ca86f000) (0MB)
    [ 0.000000] efi: mem56: type=6, attr=0x800000000000000f, range=[0x00000000ca86f000-0x00000000ca870000) (0MB)
    [ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000ca870000-0x00000000ca883000) (0MB)
    [ 0.000000] efi: mem58: type=6, attr=0x800000000000000f, range=[0x00000000ca883000-0x00000000ca884000) (0MB)
    [ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000ca884000-0x00000000ca894000) (0MB)
    [ 0.000000] efi: mem60: type=6, attr=0x800000000000000f, range=[0x00000000ca894000-0x00000000ca895000) (0MB)
    [ 0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ca895000-0x00000000ca8a9000) (0MB)
    [ 0.000000] efi: mem62: type=6, attr=0x800000000000000f, range=[0x00000000ca8a9000-0x00000000ca8aa000) (0MB)
    [ 0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000ca8aa000-0x00000000ca8e3000) (0MB)
    [ 0.000000] efi: mem64: type=6, attr=0x800000000000000f, range=[0x00000000ca8e3000-0x00000000ca935000) (0MB)
    [ 0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000ca935000-0x00000000ca9bf000) (0MB)
    [ 0.000000] efi: mem66: type=6, attr=0x800000000000000f, range=[0x00000000ca9bf000-0x00000000caabf000) (1MB)
    [ 0.000000] efi: mem67: type=0, attr=0xf, range=[0x00000000caabf000-0x00000000caebf000) (4MB)
    [ 0.000000] efi: mem68: type=10, attr=0xf, range=[0x00000000caebf000-0x00000000cafbf000) (1MB)
    [ 0.000000] efi: mem69: type=9, attr=0xf, range=[0x00000000cafbf000-0x00000000cafff000) (0MB)
    [ 0.000000] efi: mem70: type=4, attr=0xf, range=[0x00000000cafff000-0x00000000cb000000) (0MB)
    [ 0.000000] efi: mem71: type=7, attr=0xf, range=[0x0000000100000000-0x000000022f600000) (4854MB)
    [ 0.000000] efi: mem72: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem73: type=0, attr=0x0, range=[0x00000000cb000000-0x00000000cfa00000) (74MB)
    [ 0.000000] efi: mem74: type=11, attr=0x8000000000000001, range=[0x00000000f0000000-0x00000000f4000000) (64MB)
    [ 0.000000] efi: mem75: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
    [ 0.000000] efi: mem76: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem77: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
    [ 0.000000] efi: mem78: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem79: type=0, attr=0x0, range=[0x00000000fed98000-0x00000000feda0000) (0MB)
    [ 0.000000] efi: mem80: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem81: type=11, attr=0x8000000000000000, range=[0x00000000ffcc0000-0x0000000100000000) (3MB)
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: LENOVO 20175/INVALID, BIOS 66CN54WW 01/21/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x22f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
    [ 0.000000] 3 base 0C8000000 mask FFE000000 write-back
    [ 0.000000] 4 base 0CA000000 mask FFF000000 write-back
    [ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 6 base 100000000 mask F00000000 write-back
    [ 0.000000] 7 base 200000000 mask FC0000000 write-back
    [ 0.000000] 8 base 22F600000 mask FFFE00000 uncachable
    [ 0.000000] 9 base 22F800000 mask FFF800000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
    [ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
    [ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x22f400000-0x22f5fffff]
    [ 0.000000] [mem 0x22f400000-0x22f5fffff] page 2M
    [ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22f3fffff]
    [ 0.000000] [mem 0x22c000000-0x22f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
    [ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
    [ 0.000000] BRK [0x01b45000, 0x01b45fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0xc4daffff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0xc4bfffff] page 2M
    [ 0.000000] [mem 0xc4c00000-0xc4daffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xc61b0000-0xca7befff]
    [ 0.000000] [mem 0xc61b0000-0xc61fffff] page 4k
    [ 0.000000] [mem 0xc6200000-0xca5fffff] page 2M
    [ 0.000000] [mem 0xca600000-0xca7befff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
    [ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x7fba4000-0x7fffffff]
    [ 0.000000] ACPI: RSDP 00000000caffe014 000024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 00000000caffe210 0000DC (v01 LENOVO CB-01 00000001 01000013)
    [ 0.000000] ACPI: FACP 00000000caff5000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DSDT 00000000cafe9000 008814 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FACS 00000000cafbb000 000040
    [ 0.000000] ACPI: SLIC 00000000caffd000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: UEFI 00000000caffc000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caffb000 000662 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caffa000 000A39 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caff9000 000098 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caff8000 000058 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caff7000 000757 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASF! 00000000caff6000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: HPET 00000000caff4000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: APIC 00000000caff3000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MCFG 00000000caff2000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: WDAT 00000000cafe8000 000224 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000cafe6000 001068 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 00000000cafe4000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASPT 00000000cafe2000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DBGP 00000000cafe1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FPDT 00000000cafdf000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MSDM 00000000cafde000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000cafdd000 0009AA (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000cafdc000 000B22 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DMAR 00000000cafdb000 0000B8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BGRT 00000000cafda000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22f5fffff]
    [ 0.000000] NODE_DATA [mem 0x22f5f1000-0x22f5f5fff]
    [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226c00000-ffff88022ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x22f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00087fff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0xc4daffff]
    [ 0.000000] node 0: [mem 0xc61b0000-0xca7befff]
    [ 0.000000] node 0: [mem 0xcafff000-0xcaffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x22f5fffff]
    [ 0.000000] On node 0 totalpages: 2066246
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 22 pages reserved
    [ 0.000000] DMA zone: 3975 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12807 pages used for memmap
    [ 0.000000] DMA32 zone: 819647 pages, LIFO batch:31
    [ 0.000000] Normal zone: 19416 pages used for memmap
    [ 0.000000] Normal zone: 1242624 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc3217000-0xc3217fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc3227000-0xc3227fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc4db0000-0xc61affff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xca7bf000-0xcaebefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcaebf000-0xcafbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcafbf000-0xcaffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed97fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed98000-0xfed9ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcbffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffcc0000-0xffffffff]
    [ 0.000000] e820: [mem 0xcfa00000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022f200000 s86656 r8192 d23936 u262144
    [ 0.000000] pcpu-alloc: s86656 r8192 d23936 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2033937
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: initrd=\initramfs-linux-lts.img root=/dev/mapper/Linux-Arch rw resume=/dev/mapper/Linux-Swap pcie_aspm=force i915.i915_enable_rc6=1
    [ 0.000000] PCIe ASPM is forcibly enabled
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7988560K/8264984K available (5187K kernel code, 858K rwdata, 1640K rodata, 1136K init, 1300K bss, 276424K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2494.263 MHz processor
    [ 0.000042] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.52 BogoMIPS (lpj=24942630)
    [ 0.000045] pid_max: default: 32768 minimum: 301
    [ 0.000053] ACPI: Core revision 20131218
    [ 0.008110] ACPI: All ACPI Tables successfully acquired
    [ 0.034617] Security Framework initialized
    [ 0.034625] Yama: becoming mindful.
    [ 0.035238] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.037855] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.039006] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.039017] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.039253] Initializing cgroup subsys memory
    [ 0.039259] Initializing cgroup subsys devices
    [ 0.039260] Initializing cgroup subsys freezer
    [ 0.039262] Initializing cgroup subsys net_cls
    [ 0.039264] Initializing cgroup subsys blkio
    [ 0.039291] CPU: Physical Processor ID: 0
    [ 0.039293] CPU: Processor Core ID: 0
    [ 0.039298] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.039769] mce: CPU supports 7 MCE banks
    [ 0.039782] CPU0: Thermal monitoring enabled (TM1)
    [ 0.039792] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    tlb_flushall_shift: 2
    [ 0.039910] Freeing SMP alternatives memory: 20K (ffffffff819f4000 - ffffffff819f9000)
    [ 0.043468] ftrace: allocating 20111 entries in 79 pages
    [ 0.054896] dmar: Host address width 36
    [ 0.054899] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.054906] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [ 0.054908] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.054912] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.054914] dmar: RMRR base: 0x000000cae8c000 end: 0x000000caeabfff
    [ 0.054915] dmar: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff
    [ 0.054992] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
    [ 0.054994] HPET id 0 under DRHD base 0xfed91000
    [ 0.054995] Queued invalidation will be enabled to support x2apic and Intr-remapping.
    [ 0.055169] Enabled IRQ remapping in x2apic mode
    [ 0.055170] Enabling x2apic
    [ 0.055172] Enabled x2apic
    [ 0.055180] Switched APIC routing to cluster x2apic.
    [ 0.055649] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.155770] smpboot: CPU0: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.155781] TSC deadline timer enabled
    [ 0.155793] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.155800] ... version: 3
    [ 0.155802] ... bit width: 48
    [ 0.155803] ... generic registers: 4
    [ 0.155804] ... value mask: 0000ffffffffffff
    [ 0.155805] ... max period: 0000ffffffffffff
    [ 0.155806] ... fixed-purpose events: 3
    [ 0.155807] ... event mask: 000000070000000f
    [ 0.157083] x86: Booting SMP configuration:
    [ 0.157086] .... node #0, CPUs: #1 #2 #3
    [ 0.198397] x86: Booted up 1 node, 4 CPUs
    [ 0.198401] smpboot: Total of 4 processors activated (19954.10 BogoMIPS)
    [ 0.202933] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.203185] devtmpfs: initialized
    [ 0.206444] PM: Registering ACPI NVS region [mem 0xcaebf000-0xcafbefff] (1048576 bytes)
    [ 0.207361] pinctrl core: initialized pinctrl subsystem
    [ 0.207403] RTC time: 18:04:53, date: 11/03/14
    [ 0.207440] NET: Registered protocol family 16
    [ 0.207534] cpuidle: using governor ladder
    [ 0.207535] cpuidle: using governor menu
    [ 0.207568] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.207570] ACPI: bus type PCI registered
    [ 0.207572] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.207648] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.207651] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.207745] PCI: Using configuration type 1 for base access
    [ 0.208531] bio: create slab <bio-0> at 0
    [ 0.208645] ACPI: Added _OSI(Module Device)
    [ 0.208647] ACPI: Added _OSI(Processor Device)
    [ 0.208648] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.208649] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.211733] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.236410] ACPI: SSDT 00000000cae17018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
    [ 0.236803] ACPI: Dynamic OEM Table Load:
    [ 0.236805] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
    [ 0.266214] ACPI: SSDT 00000000cae18a98 000303 (v01 PmRef ApIst 00003000 INTL 20121220)
    [ 0.266634] ACPI: Dynamic OEM Table Load:
    [ 0.266636] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20121220)
    [ 0.296118] ACPI: SSDT 00000000cae16d98 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
    [ 0.296501] ACPI: Dynamic OEM Table Load:
    [ 0.296503] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
    [ 0.773800] ACPI: Interpreter enabled
    [ 0.773808] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
    [ 0.773813] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
    [ 0.773829] ACPI: (supports S0 S3 S4 S5)
    [ 0.773831] ACPI: Using IOAPIC for interrupt routing
    [ 0.773864] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.774030] ACPI: No dock devices found.
    [ 0.780437] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.780443] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.780579] \_SB_.PCI0:_OSC invalid UUID
    [ 0.780581] _OSC request data:1 1f 0
    [ 0.780585] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 0.781130] PCI host bridge to bus 0000:00
    [ 0.781133] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.781136] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.781137] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.781139] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.781141] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.781143] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.781145] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.781147] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [ 0.781148] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.781150] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.781152] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.781154] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.781156] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.781157] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.781159] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.781161] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.781163] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
    [ 0.781171] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.781277] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.781291] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
    [ 0.781299] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.781305] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
    [ 0.781403] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
    [ 0.781415] pci 0000:00:04.0: reg 0x10: [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.781541] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.781567] pci 0000:00:14.0: reg 0x10: [mem 0xe0400000-0xe040ffff 64bit]
    [ 0.781646] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.781694] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.781745] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.781772] pci 0000:00:16.0: reg 0x10: [mem 0xe041c000-0xe041c00f 64bit]
    [ 0.781856] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.781955] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.781980] pci 0000:00:1a.0: reg 0x10: [mem 0xe0421000-0xe04213ff]
    [ 0.782080] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.782144] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.782193] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.782212] pci 0000:00:1b.0: reg 0x10: [mem 0xe0418000-0xe041bfff 64bit]
    [ 0.782296] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.782345] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.782396] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.782420] pci 0000:00:1d.0: reg 0x10: [mem 0xe0420000-0xe04203ff]
    [ 0.782520] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.782583] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.782634] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
    [ 0.782828] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.782850] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f]
    [ 0.782859] pci 0000:00:1f.2: reg 0x14: [io 0x2094-0x2097]
    [ 0.782869] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087]
    [ 0.782877] pci 0000:00:1f.2: reg 0x1c: [io 0x2090-0x2093]
    [ 0.782887] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f]
    [ 0.782897] pci 0000:00:1f.2: reg 0x24: [mem 0xe041f000-0xe041f7ff]
    [ 0.782948] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.783031] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.783050] pci 0000:00:1f.3: reg 0x10: [mem 0xe041d000-0xe041d0ff 64bit]
    [ 0.783074] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f]
    [ 0.783173] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
    [ 0.783198] pci 0000:00:1f.6: reg 0x10: [mem 0xe041e000-0xe041efff 64bit]
    [ 0.783553] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783614] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783672] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783732] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783790] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783848] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783908] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783966] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.784076] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 0.784121] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.784209] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.784212] vgaarb: loaded
    [ 0.784213] vgaarb: bridge control possible 0000:00:02.0
    [ 0.784333] PCI: Using ACPI for IRQ routing
    [ 0.786165] PCI: pci_cache_line_size set to 64 bytes
    [ 0.786172] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.786212] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
    [ 0.786214] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 0.786216] e820: reserve RAM buffer [mem 0xc3217018-0xc3ffffff]
    [ 0.786217] e820: reserve RAM buffer [mem 0xc4db0000-0xc7ffffff]
    [ 0.786219] e820: reserve RAM buffer [mem 0xca7bf000-0xcbffffff]
    [ 0.786221] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
    [ 0.786222] e820: reserve RAM buffer [mem 0x22f600000-0x22fffffff]
    [ 0.786315] NetLabel: Initializing
    [ 0.786317] NetLabel: domain hash size = 128
    [ 0.786318] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.786331] NetLabel: unlabeled traffic allowed by default
    [ 0.786356] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.786361] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.788395] Switched to clocksource hpet
    [ 0.793449] pnp: PnP ACPI init
    [ 0.793466] ACPI: bus type PNP registered
    [ 0.793581] pnp 00:00: [dma 4]
    [ 0.793609] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.793633] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.793732] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.793773] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.793820] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 0.793822] system 00:04: [io 0x1000-0x100f] has been reserved
    [ 0.793824] system 00:04: [io 0xffff] has been reserved
    [ 0.793826] system 00:04: [io 0xffff] has been reserved
    [ 0.793829] system 00:04: [io 0x0400-0x0453] could not be reserved
    [ 0.793831] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 0.793833] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 0.793835] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 0.793838] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.793870] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.793919] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.793922] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.793963] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.794001] pnp 00:08: Plug and Play ACPI device, IDs SYN2b01 SYN2b00 SYN0002 PNP0f13 (active)
    [ 0.794134] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.794137] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.794139] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.794141] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.794143] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.794145] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.794148] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 0.794150] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.794152] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.794154] system 00:09: [mem 0xcfa00000-0xcfa00fff] has been reserved
    [ 0.794157] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.794451] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.794453] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
    [ 0.794456] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.794473] pnp: PnP ACPI: found 11 devices
    [ 0.794475] ACPI: bus type PNP unregistered
    [ 0.801229] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfa08000-0xcfa0ffff 64bit]
    [ 0.801237] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.801239] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.801241] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.801243] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.801245] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.801247] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.801249] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    [ 0.801251] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    [ 0.801253] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    [ 0.801254] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    [ 0.801256] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    [ 0.801258] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
    [ 0.801260] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
    [ 0.801262] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
    [ 0.801264] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
    [ 0.801266] pci_bus 0000:00: resource 19 [mem 0xcfa00000-0xfeafffff]
    [ 0.801299] NET: Registered protocol family 2
    [ 0.801504] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.801681] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.801864] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.801881] TCP: reno registered
    [ 0.801894] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.801927] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.802001] NET: Registered protocol family 1
    [ 0.802012] pci 0000:00:02.0: Boot video device
    [ 0.838581] PCI: CLS 64 bytes, default 64
    [ 0.838623] Unpacking initramfs...
    [ 0.931743] Freeing initrd memory: 4464K (ffff88007fba4000 - ffff880080000000)
    [ 0.931755] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.931757] software IO TLB [mem 0xbf1c0000-0xc31c0000] (64MB) mapped at [ffff8800bf1c0000-ffff8800c31bffff]
    [ 0.931789] Simple Boot Flag at 0x44 set to 0x1
    [ 0.932025] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
    [ 0.932033] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
    [ 0.932042] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
    [ 0.932051] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
    [ 0.932111] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.932127] Scanning for low memory corruption every 60 seconds
    [ 0.932408] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [ 0.948267] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.949675] zbud: loaded
    [ 0.949848] VFS: Disk quotas dquot_6.5.2
    [ 0.949897] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.950024] msgmni has been set to 15732
    [ 0.950080] Key type big_key registered
    [ 0.950224] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.950262] io scheduler noop registered
    [ 0.950265] io scheduler deadline registered (default)
    [ 0.950296] io scheduler cfq registered
    [ 0.950355] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.950370] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.950401] efifb: probing for efifb
    [ 0.950423] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 5628k, total 5625k
    [ 0.950425] efifb: mode is 1600x900x32, linelength=6400, pages=1
    [ 0.950426] efifb: scrolling: redraw
    [ 0.950428] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.955222] Console: switching to colour frame buffer device 200x56
    [ 0.959939] fb0: EFI VGA frame buffer device
    [ 0.959947] intel_idle: MWAIT substates: 0x21120
    [ 0.959948] intel_idle: v0.4 model 0x3A
    [ 0.959949] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.960140] GHES: HEST is not enabled!
    [ 0.960192] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.960674] Linux agpgart interface v0.103
    [ 0.960719] rtc_cmos 00:05: RTC can wake from S4
    [ 0.960854] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.960891] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.960901] Intel P-state driver initializing.
    [ 0.960913] Intel pstate controlling: cpu 0
    [ 0.960933] Intel pstate controlling: cpu 1
    [ 0.960948] Intel pstate controlling: cpu 2
    [ 0.960965] Intel pstate controlling: cpu 3
    [ 0.960993] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.961133] TCP: cubic registered
    [ 0.961239] NET: Registered protocol family 10
    [ 0.961427] NET: Registered protocol family 17
    [ 0.961965] registered taskstats version 1
    [ 0.962642] Magic number: 6:677:88
    [ 0.962705] acpi INT3F0D:00: hash matches
    [ 0.962828] rtc_cmos 00:05: setting system clock to 2014-11-03 18:04:54 UTC (1415037894)
    [ 0.963002] PM: Checking hibernation image partition /dev/mapper/Linux-Swap
    [ 0.963010] PM: Hibernation image not present or could not be loaded.
    [ 0.964972] Freeing unused kernel memory: 1136K (ffffffff818d8000 - ffffffff819f4000)
    [ 0.964975] Write protecting the kernel read-only data: 8192k
    [ 0.970240] Freeing unused kernel memory: 944K (ffff880001514000 - ffff880001600000)
    [ 0.971926] Freeing unused kernel memory: 408K (ffff88000179a000 - ffff880001800000)
    [ 0.980028] random: systemd-tmpfile urandom read with 3 bits of entropy available
    [ 0.981987] systemd-udevd[57]: starting version 216
    [ 0.993396] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.999168] ACPI: bus type USB registered
    [ 0.999188] usbcore: registered new interface driver usbfs
    [ 0.999195] usbcore: registered new interface driver hub
    [ 0.999618] SCSI subsystem initialized
    [ 0.999671] usbcore: registered new device driver usb
    [ 1.000171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.000324] ehci-pci: EHCI PCI platform driver
    [ 1.000472] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 1.000479] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.000498] ehci-pci 0000:00:1a.0: debug port 2
    [ 1.001114] libata version 3.00 loaded.
    [ 1.004412] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.004425] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe0421000
    [ 1.005570] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.005576] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.018706] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.018976] hub 1-0:1.0: USB hub found
    [ 1.018989] hub 1-0:1.0: 2 ports detected
    [ 1.019277] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 1.019281] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.019293] ehci-pci 0000:00:1d.0: debug port 2
    [ 1.023202] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.023218] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe0420000
    [ 1.028001] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.038738] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.039375] hub 2-0:1.0: USB hub found
    [ 1.039401] hub 2-0:1.0: 2 ports detected
    [ 1.039970] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.039984] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 1.040112] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 1.040137] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
    [ 1.040384] hub 3-0:1.0: USB hub found
    [ 1.040404] hub 3-0:1.0: 4 ports detected
    [ 1.040970] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.040975] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 1.041377] hub 4-0:1.0: USB hub found
    [ 1.041406] hub 4-0:1.0: 4 ports detected
    [ 1.041933] ahci 0000:00:1f.2: version 3.0
    [ 1.042141] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 1.042189] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1 impl SATA mode
    [ 1.042192] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 1.042951] scsi0 : ahci
    [ 1.043089] scsi1 : ahci
    [ 1.043205] scsi2 : ahci
    [ 1.043321] scsi3 : ahci
    [ 1.043443] scsi4 : ahci
    [ 1.043605] scsi5 : ahci
    [ 1.043699] ata1: SATA max UDMA/133 abar m2048@0xe041f000 port 0xe041f100 irq 43
    [ 1.043704] ata2: DUMMY
    [ 1.043707] ata3: DUMMY
    [ 1.043709] ata4: DUMMY
    [ 1.043711] ata5: DUMMY
    [ 1.043713] ata6: DUMMY
    [ 1.339195] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 1.389168] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.390125] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 1.390134] ata1.00: ATA-9: SAMSUNG MZMTD256HAGM-000L1, DXT42L0Q, max UDMA/133
    [ 1.390139] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.390821] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 1.390986] ata1.00: configured for UDMA/133
    [ 1.391372] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMTD256 DXT4 PQ: 0 ANSI: 5
    [ 1.401296] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 1.401579] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.401588] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.401790] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.404906] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
    [ 1.406850] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.490272] hub 1-1:1.0: USB hub found
    [ 1.490465] hub 1-1:1.0: 6 ports detected
    [ 1.512747] device-mapper: uevent: version 1.0.3
    [ 1.512926] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
    [ 1.519284] bio: create slab <bio-1> at 1
    [ 1.545404] PM: Starting manual resume from disk
    [ 1.545409] PM: Hibernation image partition 254:0 present
    [ 1.545411] PM: Looking for hibernation image.
    [ 1.545576] PM: Image not found (code -22)
    [ 1.545578] PM: Hibernation image not present or could not be loaded.
    [ 1.579429] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
    [ 1.579432] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
    [ 1.583409] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.584558] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
    [ 1.584561] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
    [ 1.609376] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 1.665486] systemd[1]: Mounting cgroup to /sys/fs/cgroup/cpuset of type cgroup with options cpuset.
    [ 1.665742] systemd[1]: Mounting cgroup to /sys/fs/cgroup/cpu,cpuacct of type cgroup with options cpu,cpuacct.
    [ 1.665813] systemd[1]: Mounting cgroup to /sys/fs/cgroup/memory of type cgroup with options memory.
    [ 1.665853] systemd[1]: Mounting cgroup to /sys/fs/cgroup/devices of type cgroup with options devices.
    [ 1.665880] systemd[1]: Mounting cgroup to /sys/fs/cgroup/freezer of type cgroup with options freezer.
    [ 1.665906] systemd[1]: Mounting cgroup to /sys/fs/cgroup/net_cls of type cgroup with options net_cls.
    [ 1.665932] systemd[1]: Mounting cgroup to /sys/fs/cgroup/blkio of type cgroup with options blkio.
    [ 1.665987] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
    [ 1.666093] systemd[1]: Detected architecture 'x86-64'.
    [ 1.667499] systemd[1]: Set hostname to <arch-yogi>.
    [ 1.668059] systemd[1]: Using cgroup controller name=systemd. File system hierarchy is at /sys/fs/cgroup/systemd.
    [ 1.668094] systemd[1]: Installed release agent.
    [ 1.668133] systemd[1]: Set up TFD_TIMER_CANCEL_ON_SET timerfd.
    [ 1.669521] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-getty-generator as 147.
    [ 1.669581] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-gpt-auto-generator as 148.
    [ 1.669637] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-fstab-generator as 149.
    [ 1.669689] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-system-update-generator as 150.
    [ 1.669743] systemd[146]: Spawned /usr/lib/systemd/system-generators/lvm2-activation-generator as 151.
    [ 1.669826] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-efi-boot-generator as 152.
    [ 1.669899] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-debug-generator as 153.
    [ 1.669992] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-cryptsetup-generator as 154.
    [ 1.671020] systemd[146]: /usr/lib/systemd/system-generators/systemd-getty-generator succeeded.
    [ 1.677317] systemd[146]: /usr/lib/systemd/system-generators/systemd-gpt-auto-generator succeeded.
    [ 1.678493] systemd[146]: /usr/lib/systemd/system-generators/systemd-fstab-generator succeeded.
    [ 1.678499] systemd[146]: /usr/lib/systemd/system-generators/systemd-system-update-generator succeeded.
    [ 1.689210] systemd[146]: /usr/lib/systemd/system-generators/lvm2-activation-generator succeeded.
    [ 1.689216] systemd[146]: /usr/lib/systemd/system-generators/systemd-efi-boot-generator succeeded.
    [ 1.689220] systemd[146]: /usr/lib/systemd/system-generators/systemd-debug-generator succeeded.
    [ 1.689223] systemd[146]: /usr/lib/systemd/system-generators/systemd-cryptsetup-generator succeeded.
    [ 1.689278] systemd[1]: /usr/lib/systemd/system-generators succeeded.
    [ 1.689509] systemd[1]: Looking for unit files in (higher priority first):
    [ 1.689512] systemd[1]: /etc/systemd/system
    [ 1.689513] systemd[1]: /run/systemd/system
    [ 1.689514] systemd[1]: /run/systemd/generator
    [ 1.689516] systemd[1]: /usr/local/lib/systemd/system
    [ 1.689517] systemd[1]: /usr/lib/systemd/system
    [ 1.689518] systemd[1]: /run/systemd/generator.late
    [ 1.689520] systemd[1]: SysV init scripts and rcN.d links support disabled
    [ 1.696010] systemd[1]: Failed to load configuration for auditd.service: No such file or directory
    [ 1.699470] systemd[1]: Failed to load configuration for plymouth-start.service: No such file or directory
    [ 1.704745] systemd[1]: Failed to load configuration for syslog.service: No such file or directory
    [ 1.711661] systemd[1]: Failed to load configuration for plymouth-quit.service: No such file or directory
    [ 1.712238] systemd[1]: Failed to load configuration for plymouth-quit-wait.service: No such file or directory
    [ 1.720811] systemd[1]: Using notification socket /run/systemd/notify
    [ 1.720824] systemd[1]: Successfully created private D-Bus server.
    [ 1.720829] systemd[1]: -.mount changed dead -> mounted
    [ 1.720856] systemd[1]: Activating default unit: default.target
    [ 1.720860] systemd[1]: Trying to enqueue job graphical.target/start/isolate
    [ 1.720991] systemd[1]: Looking at job [email protected]/stop conflicted_by=yes
    [ 1.720993] systemd[1]: Looking at job [email protected]/start conflicted_by=no
    [ 1.720996] systemd[1]: Fixing conflicting jobs [email protected]/stop,[email protected]/start by deleting job [email protected]/start
    [ 1.720998] systemd[1]: Looking at job gdm.service/start conflicted_by=no
    [ 1.721000] systemd[1]: Looking at job gdm.service/stop conflicted_by=no
    [ 1.721002] systemd[1]: Fixing conflicting jobs gdm.service/start,gdm.service/stop by deleting job gdm.service/stop
    [ 1.721036] systemd[1]: Installed new job graphical.target/start as 1
    [ 1.721044] systemd[1]: Installed new job multi-user.target/start as 2
    [ 1.721048] systemd[1]: Installed new job basic.target/start as 3
    [ 1.721052] systemd[1]: Installed new job sysinit.target/start as 4
    [ 1.721056] systemd[1]: Installed new job local-fs.target/start as 5
    [ 1.721059] systemd[1]: Installed new job boot.mount/start as 6
    [ 1.721063] systemd[1]: Installed new job system.slice/start as 8
    [ 1.721067] systemd[1]: Installed new job -.slice/start as 9
    [ 1.721070] systemd[1]: Installed new job dev-sda2.device/start as 10
    [ 1.721077] systemd[1]: Installed new job [email protected]/start as 11
    [ 1.721082] systemd[1]: Installed new job system-systemd\x2dfsck.slice/start as 12
    [ 1.721085] systemd[1]: Installed new job home.mount/start as 15
    [ 1.721089] systemd[1]: Installed new job dev-mapper-Linux\x2dHome.device/start as 16
    [ 1.721093] systemd[1]: Installed new job systemd-fsck@dev-mapper-Linux\x2dHome.service/start as 17
    [ 1.721097] systemd[1]: Installed new job systemd-fsck-root.service/start as 18
    [ 1.721100] systemd[1]: Installed new job tmp.mount/start as 19
    [ 1.721104] systemd[1]: Installed new job systemd-remount-fs.service/start as 20
    [ 1.721107] systemd[1]: Installed new job local-fs-pre.target/start as 21
    [ 1.721110] systemd[1]: Installed new job boot.automount/start as 22
    [ 1.721114] systemd[1]: Installed new job swap.target/start as 23
    [ 1.721117] systemd[1]: Installed new job dev-mapper-Linux\x2dSwap.swap/start as 24
    [ 1.721121] systemd[1]: Installed new job dev-mapper-Linux\x2dSwap.device/start as 25
    [ 1.721124] systemd[1]: Installed new job systemd-timesyncd.service/start as 26
    [ 1.721127] systemd[1]: Installed new job time-sync.target/start as 27
    [ 1.721131] systemd[1]: Installed new job ldconfig.service/start as 28
    [ 1.721134] systemd[1]: Installed new job sys-kernel-debug.mount/start as 29
    [ 1.721137] systemd[1]: Installed new job systemd-vconsole-setup.service/start as 30
    [ 1.721140] systemd[1]: Installed new job sys-kernel-config.mount/start as 31
    [ 1.721144] systemd[1]: Installed new job systemd-journal-flush.service/start as 32
    [ 1.721147] systemd[1]: Installed new job systemd-journald.service/start as 33
    [ 1.721150] systemd[1]: Installed new job systemd-journald.socket/start as 34
    [ 1.721154] systemd[1]: Installed new job systemd-journald-dev-log.socket/start as 35
    [ 1.721157] systemd[1]: Installed new job systemd-sysctl.service/start as 36
    [ 1.721160] systemd[1]: Installed new job systemd-firstboot.service/start as 37
    [ 1.721164] systemd[1]: Installed new job cryptsetup.target/start as 38
    [ 1.721167] systemd[1]: Installed new job lvm2-lvmetad.socket/start as 39
    [ 1.721170] systemd[1]: Installed new job kmod-static-nodes.service/start as 40
    [ 1.721173] systemd[1]: Installed new job systemd-binfmt.service/start as 41
    [ 1.721177] systemd[1]: Installed new job sys-fs-fuse-connections.mount/start as 42
    [ 1.721180] systemd[1]: Installed new job systemd-journal-catalog-update.service/start as 43
    [ 1.721184] systemd[1]: Installed new job systemd-udevd.service/start as 44
    [ 1.721187] systemd[1]: Installed new job systemd-udevd-control.socket/start as 45
    [ 1.721191] systemd[1]: Installed new job systemd-udevd-kernel.socket/start as 46
    [ 1.721194] systemd[1]: Installed new job systemd-ask-password-console.path/start as 47
    [ 1.721197] systemd[1]: Installed new job systemd-random-seed.service/start as 48
    [ 1.721200] systemd[1]: Installed new job dev-mqueue.mount/start as 49
    [ 1.721204] systemd[1]: Installed new job systemd-modules-load.service/start as 50
    [ 1.721207] systemd[1]: Installed new job proc-sys-fs-binfmt_misc.automount/start as 51
    [ 1.721211] systemd[1]: Installed new job systemd-tmpfiles-setup-dev.service/start as 52
    [ 1.721214] systemd[1]: Installed new job systemd-udev-trigger.service/start as 53
    [ 1.721217] systemd[1]: Installed new job systemd-tmpfiles-setup.service/start as 54
    [ 1.721220] systemd[1]: Installed new job systemd-update-utmp.service/start as 55
    [ 1.721224] systemd[1]: Installed new job dev-hugepages.mount/start as 56
    [ 1.721227] systemd[1]: Installed new job systemd-sysusers.service/start as 57
    [ 1.721230] systemd[1]: Installed new job systemd-udev-hwdb-update.service/start as 58
    [ 1.721233] systemd[1]: Installed new job systemd-update-done.service/start as 59
    [ 1.721237] systemd[1]: Installed new job sockets.target/start as 62
    [ 1.721240] systemd[1]: Installed new job acpid.socket/start as 63
    [ 1.721244] systemd[1]: Installed new job systemd-shutdownd.socket/start as 64
    [ 1.721247] systemd[1]: Installed new job dm-event.socket/start as 65
    [ 1.721250] systemd[1]: Installed new job systemd-initctl.socket/start as 66
    [ 1.721254] systemd[1]: Installed new job dbus.socket/start as 67
    [ 1.721257] systemd[1]: Installed new job timers.target/start as 68
    [ 1.721260] systemd[1]: Installed new job systemd-tmpfiles-clean.timer/start as 69
    [ 1.721263] systemd[1]: Installed new job paths.target/start as 70
    [ 1.721267] systemd[1]: Installed new job slices.target/start as 71
    [ 1.721270] systemd[1]: Installed new job acpid.service/start as 72
    [ 1.721272] systemd[1]: Installed new job systemd-udev-settle.service/start as 73
    [ 1.721276] systemd[1]: Installed new job remote-fs.target/start as 74
    [ 1.721279] systemd[1]: Installed new job NetworkManager.service/start as 75
    [ 1.721282] systemd[1]: Installed new job network.target/start as 76
    [ 1.721286] systemd[1]: Installed new job man-db.timer/start as 77
    [ 1.721289] systemd[1]: Installed new job dbus.service/start as 78
    [ 1.721292] systemd[1]: Installed new job getty.target/start as 79
    [ 1.721295] systemd[1]: Installed new job system-getty.slice/start as 81
    [ 1.721299] systemd[1]: Installed new job gdm.service

    So it times out (taking 3 minutes) then says
    [FAILED] Failed to start udev Wait for Complete Device Initialization.
    See "systemctl status systemd-udev-settle.service" for details
    [DEPEND] Dependency failed for ACPI event daemon
    so I ran
    systemctl status systemd-udev-settle
    with this output:
    ● systemd-udev-settle.service - udev Wait for Complete Device Initialization
    Loaded: loaded (/usr/lib/systemd/system/systemd-udev-settle.service; static)
    Active: active (exited) since Thu 2014-11-13 11:40:16 EST; 1min 24s ago
    Docs: man:udev(7)
    man:systemd-udevd.service(8)
    Process: 583 ExecStart=/usr/bin/udevadm settle (code=exited, status=0/SUCCESS)
    Main PID: 583 (code=exited, status=0/SUCCESS)
    CGroup: /system.slice/systemd-udev-settle.service
    Nov 13 11:40:14 arch-yogi systemd[1]: systemd-udev-settle.service changed failed -> start
    Nov 13 11:40:16 arch-yogi systemd[1]: Child 583 belongs to systemd-udev-settle.service
    Nov 13 11:40:16 arch-yogi systemd[1]: systemd-udev-settle.service: main process exited, code=exited, status=0/SUCCESS
    Nov 13 11:40:16 arch-yogi systemd[1]: systemd-udev-settle.service changed start -> exited
    Nov 13 11:40:16 arch-yogi systemd[1]: Job systemd-udev-settle.service/start finished, result=done
    Nov 13 11:40:16 arch-yogi systemd[1]: Started udev Wait for Complete Device Initialization.
    Nov 13 11:40:16 arch-yogi systemd[1]: systemd-udev-settle.service: cgroup is empty
    and after another
    systemd-analyze blame
    I get:
    2.358s systemd-udev-settle.service
    995ms lvm2-pvscan@8:8.service
    558ms rtkit-daemon.service
    488ms NetworkManager.service
    458ms udisks2.service
    341ms systemd-udev-trigger.service
    341ms systemd-binfmt.service
    319ms systemd-tmpfiles-setup-dev.service
    315ms systemd-random-seed.service
    301ms systemd-journald.service
    299ms proc-sys-fs-binfmt_misc.mount
    166ms systemd-udevd.service
    133ms [email protected]
    108ms systemd-journal-flush.service
    98ms systemd-logind.service
    90ms systemd-timesyncd.service
    80ms bluetooth.service
    65ms [email protected]
    47ms polkit.service
    37ms accounts-daemon.service
    28ms wpa_supplicant.service
    26ms systemd-sysctl.service
    25ms colord.service
    23ms systemd-fsck@dev-mapper-Linux\x2dHome.service
    23ms [email protected]
    22ms [email protected]
    21ms [email protected]
    19ms boot.mount
    18ms upower.service
    17ms avahi-daemon.service
    14ms systemd-remount-fs.service
    13ms gdm.service
    11ms tmp.mount
    11ms systemd-vconsole-setup.service
    10ms sys-kernel-debug.mount
    9ms dev-mapper-Linux\x2dSwap.swap
    8ms kmod-static-nodes.service
    6ms systemd-tmpfiles-setup.service
    5ms systemd-user-sessions.service
    5ms dev-mqueue.mount
    4ms systemd-update-utmp.service
    3ms home.mount
    3ms sys-kernel-config.mount
    3ms sys-fs-fuse-connections.mount
    3ms systemd-backlight@backlight:intel_backlight.service
    2ms dev-hugepages.mount
    systemd-analyze gets it right though:
    Startup finished in 2.538s (firmware) + 62ms (loader) + 2.238s (kernel) + 3min 3.161s (userspace) = 3min 8.001s
    What can I do?

  • Macbook Pro 15inch Early 2011 very long boot time, Macbook Pro 15inch Early 2011 very long boot time

    I have the macbook pro early 2011 15inch. i7 processor, 500gb hard drive, and 4gb ram and have Moutain lion installed. The computer takes a good minute to boot to the login screen and then probably another 30 - 45 seconds to actually login and be able to do stuff on the desktop.
    The comptuer has plenty of hard drive space, about 370gb. I dont think it should be taking this long for my comptuer to boot up. What can I do to make this boot time faster? (I am currently looking to get an ssd but that wont be for a while untill i get the money) So what can I do in the meantime to help it boot faster?

    First go to Disk Utility and verify disk and repair if needed then repair permissions. Do you have any antivirus installed? Then go through all of your apps and check to make sure they are compatible using www.roaringapps.com. I guarantee it is an incompatible app or antivirus causing the issue. Also, look at Thomas A Reeds, Understanding Upgrade Nightmares article, http://www.reedcorner.net/understanding-upgrade-nightmares/

Maybe you are looking for