Macbookpro does not connect to wireless after osx 10.7.4 upgrade

My MBP has stopped recognising my wireless connections post THE OSX 10.7.4 upgrade. It detects the modem and asks for password, but Does not accept, nor connect.
But strangely enough, if I sit next to the modem, the Mbp connects easily.
My other Apple products connect to the same modem without issue.
Have tried all basic checks both with the modem and also the mbp...but no Solutions so far.
Anyone else with à similar issue?...Amy help Will be welkome
Regards
M

This is only the site for Toshiba USA, so I don't have any information on your model. If you were using a US unit, I would recommend this article:
Troubleshooting Wi-Fi (Wireless) Problems
You may want to check the Toshiba Europe forums.
- Peter

Similar Messages

  • IPod nano does not connect with wireless earphone via bluetooth transmitters.

    My iPod nano(6th) can not connect with wireless earphone via bluetooth transmitter.
    I want to know which is wrong iPod nano or bluetooth transmitter...Now I tried with i10s because I thought previous one (motolora) might be wrong.
    But both can not connect.

    Sounds good.  Hopefully they can provide you with an accurate answer.
    B-rock

  • Lingoes translation does not connect to site after install Firefox 4 & after restore to 3.6.16, why?

    Running Windows Vista Home Premium on a dual processor with 4 GB of RAM and a HD with 50% empty. Yesterday downloaded Firefox 4 only to find that Lingoes translation software that must connect to the web site for the translations could not; as some other privacy software (GoogleShare & Tor) could no longer be used decided to restore to Firefox 3.6.13, subsequently updated to 3.6.16. While GoogleShare & Tor now function, Lingoes still does not.

    Simply download the latest version, Lingoes 2.8, which provides a firefox plug-in to support the feature of text capture.

  • Airport does not connect fast enough after sleep on Mac OS X Snow Leopard

    Ever since installing Snow Leopard, I have noticed that my Airport will not connect fast enough when I am waking from sleep. I sometimes have to wait upwards of 30 seconds after waking from sleep so Airport can connect and I can begin using the Internet. I notice that Airport says it is connected, but when I launch Safari, I get the "Not Connected to Internet" error message. I have tried removing the com.apple.airport.preferences.plist file to no avail. I have also tried Archiving and Installing and the issue is still there. Any ideas or fixes? Thanks.

    Those seem to happen a lot when you have stealth mode enabled (Security System Prefs, Firewall, Advanced). For me, they all seemed to be innocuous so I turned it off. I don't think this would affect your connectivity, though.
    You should also see it negotiate the connection. Is there anything that looks like it is repeating or retrying or other disconcerting messages? Here's an example of mine waking:1/5/10 8:27:36 PM kernel Wake reason = USB1
    1/5/10 8:27:36 PM kernel System Wake
    1/5/10 8:27:36 PM kernel vmmon: powerStateDidChange flags=0x82 (state 4)
    1/5/10 8:27:36 PM kernel Previous Sleep Cause: 0
    1/5/10 8:27:36 PM kernel USB (UHCI):Port 2 on bus 0x1d has remote wakeup from some device
    1/5/10 8:27:36 PM kernel EIR is not supported.
    1/5/10 8:27:37 PM kernel en1: 802.11d country code set to 'US'.
    1/5/10 8:27:37 PM kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 149 153 157 161 165
    1/5/10 8:27:38 PM kernel AirPort: Link Up on en1
    1/5/10 8:27:38 PM kernel AirPort: RSN handshake complete on en1
    1/5/10 8:27:38 PM configd[14] network configuration changed.

  • Mini Bridge does not open in InDesign after installing 8.0.2 upgrade

    This question was previously posted in the InDesign forum (http://forums.adobe.com/message/5833991#5833991), but it was suggested that I should cross post it here.
    I installed InDesign CS6 upgrade 8.0.2.  Now I cannot open Mini Bridge.
    If Bridge is not already open,
         - selecting File | Browse in Bridge...  or clicking on the Bridge button: Bridge opens - good!
         - control-click on the Bridge button: I get a Reset Settings error dialog - NOT good!  I cancelled this and Bridge opened fullscreen okay.
         - alt-click on the Bridge button: Two Bridge applications opened fullscreen! - NOT good!
         - shift-click on the Bridge button: Bridge opens, but Mini Bridge does not! - NOT good!
    If Bridge is already open,
         - selecting File | Browse in Bridge... or clicking on the Bridge button: the ruler bars dim and nothing else happens! - NOT good!
         - control-click on the Bridge button: Bridge opens maximized! - good!
         - alt-click on the Bridge button: the already opened Bridge, plus a new Bridge, both open! - is this normal?
         - shift-click on the Bridge button: the ruler bars dim and Mini Bridge does not open! - NOT good!
    I have tried resetting the preferences in Bridge and rebooted after doing so.
    My main concern is that I cannot get Mini Bridge to open at all.  I can ignore the other problems mentioned above, if I can just get Mini Bridge to open.
    This problem does not exist in Photoshop CS6.
    I have restored my C: drive from backup twice and tried the upgrade a total of three times.  The results are the same each time.
    Does anyone have any idea what is causing my problem and how I might correct it?  I am running 64-bit Windows 7 Professional SP1, 3.40 GHz Intel Core i7-3770 CPU, 32.0 GB installed memory.

    Sorry to hear that, forgot to mention the resetting of preferences in InDesign.
    Have you also tried that (ctrlAltShift while starting ID)?
    I'm afraid I have not really more ideas and I am a Mac user and don't know anything relevant about Windows.
    And ultimate you have of course the option to reinstall CS6 after an official uninstall in combination with the Adobe Clean Tool. But before doing so read all instructions and have a proper back up of all relevant customized settings, workspaces etc.
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  • HP Deskjet 3000 does not connect via Wireless to Windows 8.1 any more

    Good day. My job requires me to move with my laptop (Asus X54C with NO bluetooth, only wireless) between multiple workplaces. One of these offices has an HP Deskjet 3000 wireless printer, which I used with no problem whatsoever under Windows 8.0 64-bit.I didn't even need to install its drivers, because Windows 8 would instantly recognise the driver's wireless signal.
    Then a month ago I decided to update to Windows 8.1: after that, the printer suddenly stopped appearing in my “Network Connections”. I tried to uninstall the drivers and reinstall the 8.1 signed drivers by HP, but to no avail. The printer is recognised and works perfectly with an USB cable. I clearly recall seeing it on the right-hand pane (“Networks”), but since the 8.1 update it isn’t there anymore. The icon in the System Tray tells me that “connections are available”, but I can see no connections at all. In that particular office there is no Internet connection or other wireless connections apart from the HP printer (that however I cannot connect to). I'd like to point out that the wireless function is OK because a colleague of mine can still print using his Mac's Airport connection.
    I have already posted in the Windows 8 (Microsoft Answers) Forum, but nobody has ever answered. You can find the thread here: http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/winows-81-not-finding-wireless-...
    Any ideas?
    Thanks in advance.

    Hi,
    Please reinstall the following package:
        http://ftp.hp.com/pub/softpaq/sp63001-63500/sp6328​7.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Windows does not connect to wireless network on startup! Please help!.

    Hello. A few days ago i watched a tutorial on youtube on how to remove the red "x" problem over my internet icon, by deleting a file called "Config" in "Network" by opening"Regedit". I know see that I never should
    have done that. I did that, and after that every time when I start up my computer it will not automatically connect to my wireless network as it did before i deleted that "Config" file.
    Anoyone out there that know how I can fix this?. Thanks.

    Hi,
    Before we edit the registry, have we performed a backup of the registry files?  Do we have any backup available before the changes? If yes, please take use of the backups.
    Besides, could you please have a share for which tutorial you have followed? Or please share with the full registry path?
    Have you tried to reconfigure the wireless network settings with your laptop?
    For reference of wireless issues in Windows 7:
    Wired and wireless network problems
    Best regards
    Michael Shao
    TechNet Community Support

  • HP LaserJet Pro 100 color MFP M175nw does not connect to wireless network

    I recently upgraded my wireless network router. I had my HP LaserJet Pro 100 color MFP M175nw connected to the old wireless network router. The SSID is password protected (WPA2)
    I need to connect the printer to the new wireless network router. However, neither the control panel nor blue wireless connection button provide any way for me to do this. The manual has not walked through a way to do this. 
    There really needs to be a simple, no-nonsense way to just connect the printer to the wireless network. How do I connect this printer to a new wireless network?

    Hi @shakayumi ,
    I see that you are having issues configuring the printer on the new router. I would like to help.
    Restore the printer's network defaults.
    Touch the Setup button. (wrench)
    Select Network Setup Menu.
    Then select Restore Defaults.
    Print out a configuration report to make sure the IP address is 0.0.0.0 and the SSID is cleared.
    Printing a Configuration Report.
    Here are the directions for setting up the printer through the Wireless Direct to configure the printer over the network as Infrastructure.
    Turn the Wireless Direct on the printer.
    On the printer touch the setup button, (wrench) then select network setup menu, select wireless menu, select wireless direct and turn it on.
    On the computer, in the bottom right corner click on the wireless icon and select the printer from the list to connect to. Then open Internet Explorer and type in the IP address (192.168.223.1) for the printer in the address bar.
    This will load the embedded web server for the printer.
    Select the networking tab, wireless on the left hand side.
    Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
    Click on the wireless icon and connect back to your network name.
    Print out a configuration report to make sure the IP address is valid. (192... or 10....)
    Now create a new port, this will save you the time, instead of uninstalling and reinstalling the software.
    Go to Start, Devices and Printers, right click the printer, go to Printer Properties, select the Ports tab.
    Click Add Port, select Standard TCP/IP Port, then select New Port and follow the wizard.
    Type in the proper IP address for the printer.
    Make sure the printer is online.
    Test the printer.
    If you are still having issues, then try this method:
    If you have a Ethernet cable, connect it from the printer to the router.
    Wait about a minute, print the configuration page to see if you get a IP address.
    Then type the IP address into Internet Explorer's address bar to bring up the printer's web page.
    Select the networking tab, wireless on the left hand side.
    Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
    Then disconnect the Ethernet cable.
    Then wait a minute to see if you get a wireless light on the printer, print the configuration page and check the IP address again. Then type the IP address into Internet Explorer's address bar to bring up the printer's web page.
    If the printer is back on the network, create a new port. Steps are listed above.
    Make sure the printer is online.
    Try and print now.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • E71 does not connect to gps after ovi map 3.0 upgr...

    Hello.
    I have just upgraded my maps application and now I can not seem to connect to gps, the indicator is red. I tried settings and in positioning it says waiting for gps. Pls advise how I can use my maps again.
    Thank you.

    ballistictushar wrote:
    Phones with free navigation
    Nokia E72
    Nokia E71
    Nokia E66
    Nokia N97 mini Gold Edition
    Nokia N97mini
    Nokia N97
    Nokia N86 8MP
    Nokia X6 16GB
    Nokia 5800 XpressMusic
    Nokia 5235 Ovi Music Unlimited
    Nokia 5230
    To find Ovi Maps for other phones visit Maps Support-http://www.nokia.co.in/get-support-and-software/download-software/maps-support/compatibility-and-dow...
    How to install and setup GPS in nokia E-71.
    Firstly Install Nokia Ovi Suite (advance version of PC Suite) in your respected computer.
    http://www.nokia.co.in/get-support-and-software/download-software/nokia-ovi-suite
    After installation of Nokia Ovi Suite go to following link
    http://www.nokia.co.in/explore-services/ovi-maps/downloads?intc=ncomexpserv-fw-ilc-lft-con-na-ncomex...
    Now install the the second link file into your phone, i.e., "nokia_maps_3.03_10wk11_b04_s60_3.1_rom.Nocs.sis".
    After successful installation connect your phone with data cable in PC Suite (DON'T run PC suite application in your system) mode and open Nokia Ovi Suite application in your system.
    Now in Nokia Ovi Suite application click on View-Go to-Maps (make sure your system is connected to Internet and your mobile phone key pad doesn't get locked, if keypad autolock period is on switch it off for that moment and your phone is fully charged, now in maps select Asia in that India and download that India Map (103 MB) into your phone.
    Please Note that do not disconnect your phone from data cable else maps will not get downloaded and will not to be
    transferred to your phone.
    After successful installation of maps into your phone download "Voice Guidance Languages", which ever is preferred by you, if you really want to enjoy it. Like- English(UK)-with street names or in Hindi, Tamil, Urdu.
    Now you are almost done, just take your phone into your hand,
    Go to Maps then select Options-then Settings
    Internet-Connection-Offline ( don't worry your GPS will work fine as data bearer is Nokia which is free of charge, so just relax).
    Navigation-Drive Guidance-Select the desired Voice
    Walk Guidance-Select the desired Voice or you can set it to Beeps and Vibrations (if downloaded).
    Home Location- define you home location by searching in maps, this will make easier to drive back to home by simply selecting Drive Home option while using navigation.
    Now go to option Map-Categories-select the categories you want to be shown on the map.
    Its DONE, now search for any desired location press the selection button and then select Drive to or Walk to option and you will be connected to GPS.
    Please Note as GPS needs free environment so it may not work in home and generally it takes 10-15 minutes to connect so please be patient.
    Worked perfectly for me
    By the way, why doesn't the maps application work if I doenload all the maps instead of only India map??

  • Azure VM does not connect via RDP after restart

    I have restarted my VM running Windows Server 2012 from Windows Azure Portal. After restart it is unable to connect via RDP, although I can connect to it via FTP I had created already. I have ticketed the issue at Windows Azure Support but no reply in past
    2 hours.
    Any help please?

    Hi,
    What is the error message you are getting ?
    Please check this
    document that might help which talks about How to troubleshoot common RDP issues for Windows Virtual Machines in Azure .
    Regards,
    Shirisha Paderu

  • Time capsule not connecting to internet after firmware 7.6.4 upgrade

    Hi,
    I wonder if anyone can help me, I updated my 4th gen time capsule to the latest firmware yesterday and post the update my TC was telling me that there was no internet or DNS.
    After tralling the internet (using my iPhone and 3G) I eventually did a hard rest of my TC, put all my PPoE details in, wireless network details in and still I got the same error messages on the TC.
    Thinking that this could be a PPoE error I plugged an old router in, did the PPoE setting and the internet is working just fine, which leads me to beleive that this is purely a firmware issue on the TC post my upgrade to 7.6.4.
    I then decided to downgrade to a previous firmware however this seems to be impossible on my TC using airport utility. I dont have the drop down menu in my airport utility aplication to do a dowgrade, infact these is no option button at all (so I cant hold it down as suggested in other posts).
    I am currently running OSX 10.8.5 Mountain Lion), Airport Utility 6.3.1, TC 7.6.4.
    If anyone can help me resolve this issue or tell me how to downgrade the software I would be extremly gratefull! Also note I am not a techie at all, just learnt what a PPoE was!!!
    Thank you.

    Please do a factory reset.. it is more complete than hard reset.
    The Factory Reset TC Gen1-4. Or AE Gen1-5
    Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    In the airport utility.. plug it in by ethernet..
    Make sure ipv6 is set to link-local in both wireless and ethernet on the computer.
    Then simply hold down the option key whilst you click on version.. downgrade to 7.6.1  as the last two firmware are hopeless.

  • My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

    My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    Also, turn off IPv6:
    System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
    Or whatever Interface you use.

  • TS3276 iCloud email on OSX 10.8 does not connect to the server after sleep

    iCloud email on OSX 10.8 does not connect to the server after sleep.  The only way I can reconnect the iCloud email is to restart the computer. Does anyone have any ideas how to resolve this issue?

    I would suggest you try opening "Mail">click on "Mailboxes" in the Menu Bar> and select "Rebuild" from the list.  That may solve it.

  • The KitKat upgrade has been a disaster. home wireless is no longer recognized, even going through the set-up process.  It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car.  In atte

    My home wireless is no longer recognized, even going through the set-up process.  It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car.  In attempting to solve these problems I have gone to settings-phone-upgrade and it states that the upgrade is available-select to continue-(which I do)- it checks -please wait and it then states that update not available - try later.

    Maybe not too late to help you.
    For specifically fixing the Bluetooth, un-pair your phone with the car, and go through the process of repairing the two.
    In general, the KK update requires many of us (different phones) to perform a Factory Data Reset after we back up our personal content (pictures, music, movies, or other downloaded files) to a PC or MAC. This will result in you having to do a bit of work to setup icons for the programs you use, and maybe putting in the specifics again for email accounts and other specialized apps. So if you are going to do this sort of thing... copy important information/settings down on paper.
    HTH.

  • TS3048 unable to connect to keyboard. System does not detect keyboard even after switching on and off. Mouse working fine. Earlier was working fine. Keyboard is not detectable by I mac . Tried a different keyboard same problem.

    Changed batteries of keyboard -initially connected but now does not connect. Used a diffeerent keyboard -same result. Keyboard not seen in bluetooth devices.Switching on and off as well as re booting has not helped. Keyboard light continues to blink.

    Hey Gautam5058,
    Thanks for the question, and welcome to Apple Support Communities.
    The following articles provide troubleshooting steps that may help to resolve your issue:
    Apple Wireless Keyboard: Difficulty during pairing process
    http://support.apple.com/kb/TS1569
    Bluetooth Quick Assist
    http://support.apple.com/kb/HT1153
    You may also want to try resetting your computer's PRAM and NVRAM.
    To resolve this issue:
    1. Turn the Apple Wireless Keyboard off.
              - For an aluminum Apple Wireless Keyboard, hold the keyboard's power button for more than 3 seconds.
              - For a white Apple Wireless Keyboard, turn over the keyboard, and turn the power switch to the off position.
    2. Click the "Continue" button as the Setup Assistant instructs.
    3. Power the Apple Wireless Keyboard back on.
    4. Enter the 8-digit passkey and press Return. Important: You MUST press Return after you enter the 8 digit code.
    Thanks,
    Matt M.

Maybe you are looking for