Macboook pro install win8 pro and display driver isssue

Dear all,
My macbook pro has installed windows 8 pro and currently has an issue with display driver NVIDIA GeForce 330M (Microsoft Coporation - wddm v1.20). After ugraded to this version (Microsoft Coporation - wddm v1.20) it seem that windows can not shutdown, I have to press the power button all the time.
Any one can help please.
Houng

If this was working fine before that Windows Update pushed the driver down, just uninstall that driver update in Windows.  Or go into Device Manager and pick your video card and on the driver tab, click on Roll Back Driver.  It'll put the old version back on there that the Bootcamp driver disk loaded.  Of course, reloading that driver disk will also fix this in Windows.
BTW, don't ever use Windows Update to update drivers for core system components.  Nothing but trouble about 65% of the time.

Similar Messages

  • Satellite A210 - Can't install common module and display driver

    Just downgraded to XP, downloaded drivers from toshiba and the installation ended with an error message saying no driver found for my hardware. Happened with Common Module and ATI Display Driver.
    I mean, I need em both!
    Help!

    Hi
    I checked the Toshiba European driver page and it seems that the XP drivers have not been released for this A210 series!
    I think you have simply tired to install not compatible Common Modules on this notebook.
    Thats a reason why you cannot install it.
    Regarding the display driver;
    Try to install the drivers for notebook models:
    Equium A210 PSAEJE
    Equium A300D PSAK2E
    Equium L350D PSLE2E
    Satellite P200 PSPBLE
    Satellite L350D PSLE0E
    Satrellite L300D PSLC0E
    I think one of the drivers released for these series shoudl run.

  • How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

    How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

    Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
    Click Time Machine
    Click Options
    Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
    The drive will be backed up on the next Time Machine pass
    Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

  • I cloud desconnect on my macboook pro and can't get back,why?

    i cloud desconnect on my (macboook pro) and can't get back in,why?

    Have you checked the System/iCloud preference pane?  If it says you're logged in log out and log back in.  If not logged in do so.

  • ISight conflict when installing Google Voice and Video driver

    After installing Google Voice and Video driver, the iSight stops working on Flash based applications or websites.
    Two camera drivers are installed: Google camera 0 and Google camera 1.
    Even if I go to Settings and choose the correct driver (iSight Integrated), it does't works.
    The only way I found to solve this issue is removing those Google's drivers (Library/Application Support/Google/GoogleVoiceAndVideoUnistaller).
    However, this is not a solution since I can't use GTalk anymore.
    Does Flash Player 10.2 fixes this conflict?
    Regards,
    Flávio Mikami

    Sorry for not using the search, I see it's available in AUR... http://aur.archlinux.org/packages.php?ID=36308
    Now trying to install from there!

  • 1st gen mac book pro and SSD drive overheating

    Sorry if this has been answered before but I found it hard to find my particular stiruation listed here.  I need some advice!
    I have a 1st gen mac book pro 2.33 GHz with 3GB of RAM (I belive its two 2GB modules). 
    I recently replaced the dead CD drive with an adapter (from ebay) that turns it into a second drive, and installed a 120GB OCZ SSD drive.  This drive is not the startup drive and my 320 GB drive is a backup/storage.
    While I was in there I replaced the thermal grease - it had been running hot for ages and I figured that dried out grease could be the reason.  I got some artic silver paste, carefully removed the logic board, cleaned off the new paste, and sparingly applied new paste.  Since I took out the fans in the process I cleaned those and the heat sync too. (all via info online, videos and infomational pages, etc, not with wild abandon)
    Everything seems to be running fine (I watched some movies fromt he hard drive.  youtube made it run a bit hot but ok) except when the computer goes to sleep or I close the lid.  Then the computer gets crazy hot and the fans are in overdrive and it won't wake up from sleep.  The power adapter also gets super super hot.
    I reset the PRAM and ran permissions, also updated the operating system - its not 10.6.8.
    I *just* reset the SMC (we'll see if that has any effect).
    I thought I'd ask here before opening up the machine again and poking around.
    Thank yoiu for any advice!

    ok, so I think this is the issue - it has to do with the fact that my regular hard drive is a seagate.  This thread is pretty much what has bene happening to me.
    http://forums.macrumors.com/showthread.php?t=869462

  • Can't install both GART driver and display driver!!

    Ever since I got my k8n neo 2 + 3200 winchester for christmas I have had tons of problems. Problems that even come out of nowhere, like when one night when I was playing WoW, the game crashed and I eventually had to reformat. Ever since then I have been unable to install both the latest nforce GART driver and the nvdisplay driver at the same time. I can install either one seperately, but when both installed Windows boots up to a black screen. And there's nothing I can do about it. I've just gone with having only the display driver installed, but I noticed that my 6800GT has the bus listed as PCIx0 which is obviously incorrect, it should be AGP 8x. I'm pretty sure that is because the GART driver cannot be installed, as the GART driver has software to manage the AGP bus. I'm ALSO pretty sure that this is one of the reasons I get such pathetic performance in Doom 3.  It dips down to 10-15 fps often, and it NEVER did that when I had my old P4 3.0 ghz. What gives? Does anybody have ANY suggestions as to why I can't have both of these drivers installed without windows just giving me a black screen???   
    I am so disappointed with this board that I don't see how I could ever bring myself to buy MSI again. 

    Quote from: Tiresmoke on 09-March-05, 23:41:51
    Sarcasm.
    http://dictionary.reference.com/search?q=sarcasm
    sarcasm = "A cutting, often ironic remark intended to wound."
    That comment of mine you quoted was neither ironic nor intended to wound anybody or anything. I was simply voicing my disappointment in this motherboard, I have had many other problems with this board besides the one I am asking for help with right here. Please know what sarcasm means before you accuse me of using it. It's not my intent to get into trouble here. No hard feelings.
    Quote from: Tiresmoke on 09-March-05, 23:41:51
    This is not a MB issue.
     I never had this problem with my pc and drivers before I bought the Neo2. I am fully open to believing that my PSU is the problem, however.
    Quote from: Tiresmoke on 09-March-05, 23:41:51
    However as you didn't say it was a clean install
    Sorry, I thought this was clear enough. (down)
    Quote from: Law&Order on 09-March-05, 08:42:47
    I eventually had to reformat.
    Anyway, I am going to find out my PSU volts in a moment. I will edit this post when I have found them.
    Edit: Argh, I've never looked for PSU specs before. Can anybody tell me how to do that? PSU is high up in the case and I'd have to remove it to get a clean look, is there any other way of doing it? Sorry, a little embarrassing for me.  I appreciate all of your suggestions. Thanks!

  • MacBook Pro and display compatibility

    I have a mid-2009 MacBook Pro and trying to connect with the Apple 20-inch Aluminm LCD Display. M9177LL.  The included attachments do not connect.  Please advise what connections I need to connect.  Thanks.

    dlipp1968,
    the Apple 20-inch Cinema Display (M9177LL/A) came with a DVI cable, so you would need a Mini DisplayPort to DVI Adapter (or equivalent) to connect it to your Mid 2009 MacBook Pro.

  • Extend the distance between Mac Pro and display

    I'd like to know how to extend the distance between my Mac Pro and its Cinema Display. The Mac is early 2008 as is its display I think. I need a distance of about 5metres.

    yes-get a DVI Dual Link Extension cable M/F or M/M. I think you can get 'em around 25 feet max. then you'd need a gender changer, maybe......
    depends what you want to pay, though.*cough* monoprice*cough*
    just my opinion
    J.B.

  • Jerky Video and Display Driver Error

    We use CS3 at our production house.  My editor has told me he is now getting jerky videos and the following error.  This pops up in a yellow triangle at the bottom of the screen which when I click on it, an Events Window is opened.
    Error: "Desktop Display Mode has been reset because the video card returned an error. Please reset the Desktop Display Mode in the Playback Settings dialog as this may impact your playback performance."
    The computer is a Sony Vaio with 1GB RAM, P4 w/HT, RAID5 of SCSI drives, and ATI Radeon 1600 Pro.  We are running Windows XP Pro and Premiere Pro CS3.  Supposedly the video just started being jerky the last month or two.  Windows update issue?  I have tried updating the video card drivers (released March 2009) and also changed the Desktop Display to all three options ... Comptable, Standard and GPU.  The video still plays back and exports to tape jerky.  However, if we export to an AVI on the local disk, then pull that video back into an older version of Premiere Pro we can export to tape.
    Any thoughts!?!?!  I have found similar qusetions in other forums, but it seems like no one has an answer.

    It is very common for OS updates to render display drivers obsolete, and most people do not even know that these are installed. If you have tried the most recent driver (replaceing an older one), and not helped, it might be something else.
    The aspect of the video Exporting poorly, leads me to believe that your system might be underpowered, especially in the I/O sub-system. A slow, fragmented, or full HDD can do the same. That would NOT address the warning message, though. That almost has to be a vid-card, or driver issue.
    Also, if your Assets have to be decoded by PrPro, that will tax the system. If you Export as DV-AVI, then the CPU does not need to work overtime on the conversion.
    Please give a complete description of the Assest, especially their CODEC's. Please give a system breakdown, paying special attention to the I/O sub-system (HDD's specs. and all configuration details).
    Good luck,
    Hunt

  • Windows 7 Ultimate (64-Bit) fresh install, only WLAN and video driver installed but EXTREMELY slow internet connection...

    I recently checked my internet connection on my Asus G53SW and found that it was extremely slow on both the LAN and WLAN connections. I checked with a different laptop (old HP Pavilion) and I get a steady 74mbps+ connection using the same LAN cable and
    also with the WLAN connection. My ISP has checked their side and everything is fine.
    To try and resolve the issue I tried uninstalling, disabling and tweaking various software and even tried safe mode with networking, all to no avail. I then decided to do a complete fresh install this afternoon. I have installed Windows 7 Ultimate (64 bit)
    successfully onto my SSD and everything went smoothly. I have now only installed Nvidia video drivers and the (only) WLAN driver from the Asus support site.
    My WLAN connection remains incredibly slow (amost half what it is on the HP and my MacBook Pro). Clearly this is an issue with either the Asus laptop or Windows but I don't know how to proceed in order to eliminate which it could be other than to try a different
    o/s to W7-Ult.
    Can anyone help who knows more about this than me? Perhaps someone who has had a similar or the same problem because this is giving me a severe headache!
    Thanks in advance to all and for any advice.
    <script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
    tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
    isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
    if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

    Thank you for responding. As I stated in my original post the reason I went through this process was because of an extremely slow internet connection from both the WLAN and LAN connections on my G53SW. At that time I had all of the correct drivers on the
    machine. Whilst I would agree that with the machine only having a video and WLAN driver it may well not be working 'optimally', the rationale for doing this was to get the machine working with the minimum of processes to show that it was not anti-virsu software,
    Steam or the like causing interference.
    I have changed out both of the HDDs this evening (a primary SSD and a secondary 1Tb HDD) for a clean hybrid 1Tb Seagate drive. Once I have installed all of the Asus drivers (and nothing else) I will try the speed test again and report back.
    I can now report that with a fresh install of Windows 7 Ultimate SP1 and ONLY Asus drivers as supplied the issue remains. On a connection where I should see around 75mbps I am actually getting around 18mbps, sometimes considerably slower. This only affects
    my Asus machine.
    <script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
    tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
    isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
    if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

  • Satellite A200 - start up freeze and display driver stopping

    Hello, I have a few issues with my A200 laptop which is approximatley 3.5 years old.
    The most serious problem is that the computor, most recently takes up to 3 attempts to get it to run. or shuts down of it's own accord even when plugged in, this doesn't happen regularly but often enough to be a big pain in the prevurbial, especially when in the middle of an assigment ( yes I frequently back up), the fan appears to be working ok. I'm not sure if there is a driver problem that isn;t showining when I run a diagnostic through toshiba pc diagnostic or device manager or microsoft diagnostic or a direct driver update (which has never been required). my main line of thought is that there is a problem with memory or file extension.
    Q1 Can file extension errors cause this problem? how do I solve file extension problems without spending any money- if possible?
    When I connect an external display quite often the display driver stops working often reesulting in a complete freeze requiring either the use of task manager or a reset by turning off the computor and rebooting- bad news really.
    Q2 how can I remedy this?
    I have updated the bios and have all current required updates.
    Any pointers,help etc would be greatly apecieated.

    Hey,
    To be honest I dont know why you think about file extensions If your notebook shuts down itself it could be an overheating issue. The notebook would shut down to protect the hardware.
    Have you ever clean your notebook before? If you have it already for 3.5 years there is a lot of dust in cooling ventilators so use compressed air spray to blow the dust.
    Regarding your second question: Have you installed newest display driver from Toshiba driver download page? This is important because the Toshiba display drivers are pretested and designed for this model. So they would work properly and dont cause any problems.
    I hope I could help you a little bit ;)

  • Installing new RAM and hard drive and installing mac os x

    Hello all.
    I have a new hard drive and ram for my macbook that I plan on installing. Would it be okay to install both at the same time and then install Mac OS X from the install discs? Or, would I need to install the hard drive first, install Mac OS X, and then install the RAM?
    What do I need to do?
    Also, when installing MAC OS X from the discs with a new hard drive, will it allow me to do a fresh install as soon as I enter the disc? Or, do I have to restart the computer with the disc in and hold down the C key?
    Please bless me with your wisdom.
    Thanks.

    Hip Hoppa:
    Congratulations on installing the RAM and Hard Disk Drive. Now you need first to format the HDD, then install the OS, and restore from backup.
    Formatting, Partitioning Erasing a Hard Disk Drive
    • With computer shut down insert install disk in optical drive.
    • Hit Power button and immediately after chime hold down the "C" key.
    • Select language
    • Go to the Utilities menu (Tiger and later) and launch Disk Utility.
    • Select your HDD (manufacturer ID) in left side bar.
    • Select Partition tab in main panel. (You are about to create a single partition volume.)
    • Click on Options button
    • Select GUID Partition Table (Intel Macs)
    • Click OK
    • Select number of partitions in pull-down menu above Volume diagram.
    (Note 1: One partition is normally preferable for an internal HDD.)
    • Type in name in Name field (usually Macintosh HD)
    • Select Volume Format as Mac OS Extended (Journaled)
    • Click Partition button at bottom of panel.
    • Select Erase tab
    • Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
    • Check to be sure your Volume Name and Volume Format are correct.
    • Click Erase button
    • Quit Disk Utility.
    Open installer and begin installation process.
    Installation Process
    • With computer shut down insert install disk in optical drive.
    • Hit Power button and immediately after chime hold down the "C" key.
    • Select language
    • Open Installer and begin installation.
    • Select installation option
    • Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
    Optional: Check box to install X11 (Tiger and later).
    • Proceed with installation.
    • After installation computer will restart for setup.
    • After setup, reboot computer.
    • Go to Applications > Utilities > Disk Utility.
    • Select your HDD (manufacturer ID) in left side bar.
    • Select First Aid in main panel.
    • Click Repair Disk Permissions.
    • Connect to Internet.
    • Download and install Mac OS X 10.5.6 Combo Update (Leopard) or
    Mac OS X 10.4.11 Combo update (PPC) (Tiger)
    Computer will restart.
    • Repair Disk Permissions as previously.
    • Go to Apple Menu > Software Update.
    • Install all updates.
    Computer may restart after updates.
    • Go to Applications > Utilities > Disk Utility.
    • Select your HDD (manufacturer ID) in left side bar.
    • Select First Aid in main panel.
    • Click Repair Disk Permissions.
    If you have your old HDD in an external enclosure you can connect it to the computer and use Setup/Migration Assistant to move your stuff from the old drive when prompted.
    cornelius

  • Re-install of keyboard and mouse driver

    Re: HP Envy 17t-3000 CTO Notebook PC
    I want to re-install the original keyboard and mouse driver. I have the original discs -- how do I do it?
    Thanks

    If you are only talking about keyboard and mouse then it do not require additional installation as the it will be installed automatically. IN addition you can install this software:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111895-1&cc=us&dlc=en&lc=en...
    ALSO
    Try installing HP Support Assistant which will automatically download and install drivers/updates:
    HPSA Link:
    http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

  • Satellite Pro A200 PSAFCA: Need Lan and display driver for XP

    Hey
    please help me!
    I have just installed XP on my new satalite pro, but i have had trouble with the drivers.
    At the moment I have installed most but from this site i can't seem to find a driver that will help my network card, nor my video NIVIDIA drive...
    any suggestions would be very valuable

    The Satellite Pro A200 PSAFCA is not known to me. I know only the Satellite Pro A200 PSAE1, PSAE4 and PSAE7. So could you please confirm your Pro A200 series?!
    If you cannot find the single XP drivers on the Toshiba page I would recommend checking the LAN and the graphic chip which is installed on the motherboard and use the XP drivers from the chip manufacture.
    If you need an graphic driver I would recommend using the drivers from the www.omegadrivers.net or www.laptopvideo2go.com site
    Regards

Maybe you are looking for