Macdrive 6 problem - G5 to lacie to PC not possible

i have started using my external lacie with my pc.
i use macdrive 6 to identify the lacie. works fine.
however, i can't go from the pc to the lacie to the G5 all in-a-row. that is, i have to disconnect the lacie and run it either into the G5 or into the PC. but i can't network the 3 together.
note: to connect the lacie to the pc, i use the firewire 400 slot on the back of the lacie. while keeping that connection intact, i additionally connect the lacie to the G5 using the fw 800.
however, this does not work. the pc will not recognize the lacie unless i disconnect the G5, thus making it a stand-alone connection between the PC and the lacie.
anybody know a workaround?
G5 Mac OS X (10.3.9)

Hi
There is still an issue for me. When i check to see if add-ons are up to date it identifies "Java(TM) Platform SE 7 U9" as out-of-date and gives me an orange "Update" action. When i hit this it takes me to the Java website giving me "Recommended Version 7 Update 9". This is the one i've already got so i cannot get rid of the orange Update action buttons.
Furthermore, if i try the link earlier in this thread to test to see which version of Java i should be using it says "Congratulations! You have the recommended Java installed (Version 7 Update 9)" so i'm not sure what this talk of version 7.10 is about?

Similar Messages

My macbook pro was first installed with leopard and bootcamp 3.2. Now i updated to lion. The problem is now that it is not possible to update to bootcamp 3.3. or 4.0. The report: The installation source is not correct. What can i do? Thanks for answer.

my macbook pro was first installed with leopard and bootcamp 3.2 under windows 7. After update to lion it is no more possible to update bootcamp to 3.3. or 4.0. The report: The installation source ist not correct. What can i do?
auf Deutsch:
Auf meinem Macbook pro war Leopard und bootcamp 3.2 unter windows 7 installiert. Nach dem update auf lion kann bootcamp nicht mehr upgedatet werden. Weder auf 3.3. noch auf 4.0. Folgende Fehlermeldung kommt: Boot camp Dienste: Das installierte Produkt stimmt nicht mit der Installationsquelle überein. ... Was kann ich tun?

It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Mylenium

Not possible to define Custom Applications in PI2.0 for Assurance?

Hi,
Problem:
It seems that it's not possible to chage ports for the pre-defined applications under Operate->Applications and Services.
Impact:
We have a business application that we would like to define but that applications ports (tcp 3128 and 5001) collides with already prededfined applications like:
Application Details: http
Protocol(s)/Port(s) tcp/80, tcp/8000, sctp/80, tcp/3128
Application Details: yahoo-messenger
Protocol(s)/Port(s) tcp/5000-5001, tcp/5050, udp/5000-5001, tcp/5100
By showing the wrong application name for our own applications makes the Assurance part pretty useless for us and our help desk.
Any suggestions?
Regards
Ronnie

I think you maybe made a wrong turn somewhere. This is the forum for Photoshop Elements, the junior consumer version of Photoshop. I suspect you want either the Premiere forum, the Photoshop forum, or the Encore forum, all of which can be found here:
http://www.adobeforums.com/webx/.3bc4f8d8/

Problem with external Lacie disk

Hi!
I have some serious problems with my Lacie 250GB Porche disk.
The disk shows up on my desktop but it does not allow me to read and write to it. Apple's disk tool does not manage to fix the disk. I have tried running Diskwarrior, but it gives me an error saying that the disk could not be rebuilt due to a disk malfunction. I am now using Techtool Pro 4.0.4. I have not used Techtool before, only DW. Im running a process called "Recover Files Using Directory Data"...is this the one I should be using? The manual was'nt all that clear about this...Please please help me as I have 44GB of client projects on this disk.
Thanks in advance,
Tom - Norway

Hi Richard!
Thanks for your response!
I have now bought Data Rescue II from ProSoft:
http://www.prosofteng.com/products/datarescueinfo.php
It seems that the problem is my external harddrive and not the machine. I get read errors when I try to open projects in Photoshop / Indesign etc.
There are of course companies that can retrieve my data, but thats like my last solution cause they cost loads of money
Hoping that Data Rescue can clone my data to this new hd. The process seems to be taking days... 165.2 hours left and it has been working for two days now
Tom - Norway

Lacie d2 drive not ejecting disc

I have an odd problem with my Lacie d2 drive, when I put in a disc, any type of disc ...
It seems as if the mechanical eject button on the face of the lacie is disabled forcing me to use
my disc utility to eject the mounted disc.
This is a new drive and I'm just not sure if this is something common for externals on Imacs.
I checked out Lacie's website to see if maybe there was a firmware up-date but, all I could see was
"*+This update is compatible with OS X 10.3.9 thru 10.5.2, for both Intel and PPC based Macs+*"
I'm wondering if maybe I should exchange it or not, is anybody else having this same problem ?
Thanks
James

Just to reinforce what inandoutofgrace said, I too, have an older LaCie D2 external optical drive and yes, the eject button on the enclosure does not usually eject the disks as expected. Nor will the eject key on the Mac's keyboard. Whenever I've used that burner, I've had to drag the disk's icon to the trash to get it to eject . . . which it always does when done that way. Other than that, the burner has worked fairly well most of the time. And yes, the descriptions of the updates on the LaCie website are a bit hard to decipher.
One day in the near future I will probably get another external burner because of my experiences with LaCie and it won't be one of theirs. I will most likely go with one from OWC (Other World Computing) which is an online Mac peripheral and RAM vendor. I've used several of their products (RAM and external hard drives) over the years and have never had the slightest issue with any of them. They are all just ticking along. When the time comes to replace the LaCie, I'll just see what they have to offer in the way burners.
Rick

EMac External LACIE DVD Drive not reading.

eMac External LACIE DVD Drive not reading.
eMac 700 MHz running OS X 4.4
Came without DVD or modem internal
Has 256mb memory
Bought a used Lacie 1394 Firewire DVR External.
Was able to burn DVD’s and CD’s with Toast 6 Light.
Cannot find the “DVD Player” on the hard drive.
It will read data DVD.
eMac will not read any movies burnt or bought.
I was told I probably need more memory?
Thought running IDVD would fix the problem.
No Soap.
This machine was giving external modem problems before Tiger was installed.
Before we spend more money or just get ride of the eMac.
What is the DVD problem?
This same Lacie burner reads and writes DVD and CD fine with our iMac 450 DV 320mb memory. Running 9.2 and X.3

OS X 10.3.x / 10.4.x natively support data burning to external DVD drives but video payback requires software such as iDVD which isn't installed by default on models without an internal DVD drive (the installer sees no internal drive and thinks it's unnecessary). Try downloading VLC Player and see if that will let you play movies.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael

How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk

How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk.i did try all the options but I can not find the phone number to call from Croatia,
I can not change my Apple ID to the old mail (not possible!)
The old mail don't accept the new password..
I can not delete the Icloud all the time asking my the password of the old mail!
I realy need help

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired and i also reset network setting but nothing gonna be worked

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

Start Up disk problem following kernel panic-mounts but not as a boot drive

I have a problem that I can't solve.
Dual processor G4 with 3 hard drive, all of which are bootable drives with 10.4.7 installed:
A- my primary boot drive - internal SCSI drive (Adaptec PowerDomain 2930U PCI card);
B - internal hard drive that came with the G4; and
C - external Firewire hard drive
Recently, I booted into my B drive and it locked up after it went into sleep mode. On reboot, I experienced a number of kernel panic messages, prompting me to restart my computer.
PROBLEM: Since that time, I have not been able to get my A drive to once again be the Startup Disk.
Diagnostic steps that I have performed:
i. I have run and re-run Disk Warrior from a bootable CD and the A drive as well as the other 2 hard drives mount and are "repaired" by DiskWarrior.
ii. TechTools Pro shows no hardware problems and whatever glitches it has found were repaired.
iii. Disk Utilities consistently returns "Volume passed verification."
iv. Zapped the PRAM
The A drive does mount and is accessible whenever either the B drive or the C drive is the bootable drive.
System Preferences/Startup Disk lists the A drive as a candidate whenever either the B drive or the C drive is the bootable drive. However, when the A drive is selected in System Preferences, on reboot, it doesn't become the boot drive.
I have tried to restart and hold the "C" key down so that I might possibly be able to select the boot drive from A, B or C. But the C key method doesn't produce the intended result, only reverting back to the boot drive in power prior to the reboot. That occurs whether the boot drive is B or C.
At that stage, rightfully or wrongfully, since the problem persisted whether the B or C drives were the startup disk I concluded that the problem could be hardware related and not software related.
On one of the reboots following the kernel panics, a Crash Report was produced - the verbiage
which is code related and so far above my knowledge and experience that it is incomprehensible to me. I can post it separately if helpful but it won't fit in this email message due to restrictions on length of messages.
I haven't had a kernel panic following any of the last 50+ restarts that have accompanied my attempted diagnostics.
Finally, I ran the Apple Hardware Test, version 1.2.6, that came with my G4. First, I removed all peripherals except the monitor, keyboard and mouse (plugged into the keyboard), the Adaptec SCSI card, and a 3rd party FW/USB2 PCI card (OrangeLink+). I ran the Extended Test and an error code was generated during the logic board test: Error Code fire/5/2
That gave me some hope. I next removed the 3rd party FW/USB2 PCI card (OrangeLink+) and re-ran the Apple Hardware Test and no error were reported. Both the logic board and memory passed. I ran the extended test twice, each time no error.
Ah, did that solve my problem? I rebooted and I still cannot get my A drive to be the Startup Disk.
Next, I ran the Rember software (a GUI app for Memtest) and the RAM checked out as fine.
At this stage I don't have a clue. The white towel is about to be waved.
If the problem is the Adaptec SCSI card, I don't know how to test it since it obviously has to be installed to enable drive A to mount.
Does anyone have any suggestions?

I am the original poster on this thread.
Turns out that the culprit behind all my boot problems was the battery on my 5 year old Quicksilver G4. Replaced the battery and all is back to normal.
FWIW, for any Quicksilver owners with SCSI cards, be aware that you can create boot problems for your SCSI drive by zapping your PRAM. As part of my diagnostics I did zap the PRAM but that turned out not to be a problem.
Adaptec's site does include a workaround should you have problems after zapping the PRAM. This specifically covers the PowerDomain 29160 SCSI card/2930U card, which I have.

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Refer below link once
App doesn’t open | Progress wheel spins continually

Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

Welcome to Apple Support Communities
Don't download MacKeeper. Users complain about this app and it damages OS X. Also, Mac OS X knows how to take care of itself, so you don't need any other cleaning application that may damage OS X. See > https://discussions.apple.com/docs/DOC-3691

I am facing a problem that Basic Excise Duty is not picking in Tcode.: J1IS

while doing STO. Our STO procedure is intiallyyPO with UB STO then MB1B with 351 movement type transfering stock from one plant to another plant. Next step is Tcode: J1IS here BED should pick automatically once i click on GET EXCISE INVOICE tab. then we go for JIVS and MIGO with 101 movement type.
I am facing a problem that Basic Excise Duty is not picking in Tcode.: J1IS .
we are not going through SD configuration and I mentioned evrything in Tcode J1ID

Chek SAP Note 951938 is applicable to you
Regards
Sanil Bhandari

When I connect my iPhone 5 to my laptop and iTunes, I can't play movies from the iPhone on my computer.Why is that? Can I do this or it's not possible with iPhone5? With my iPod it's no problem.

When I connect my iPhone 5 to my laptop and iTunes, I can't play movies from the iPhone on my computer.Why is that? Can I do this or it's not possible with iPhone5? With my iPod it's no problem.

Reinstall iTunes. Make sure you follow the instructions in this support document to the letter. http://support.apple.com/kb/HT1923.
You may have some problems because Apple has not certified that everything works with Windows 8 yet.

I'm not able to send emails with mail.ru. Receiving and reading is not a problem. When I create a email with mail.ru its not possible to send it although its stored in my mail.ru account as "still to be send". What can it be??

I'm not able to send emails with mail.ru. Receiving is not a problem. Creating a mail is also not a problem and the mail will be stored at mail.ru as still to be send, only problem is its not possible to send. I noticed the buttons for sending change colour when used but they don't perform. What it is?

Don't know what changed, but all of a sudden able to send emails by mail.ru ...... sorry for bothering.

Macdrive 6 problem - G5 to lacie to PC not possible

Similar Messages

Maybe you are looking for