Machine boot time, rcscripts and jws

Is there any way that I can specify that the jws application manager be started at the machine boot time/ restart time?
If anyone has any ideas , please looking forward for that.
Thanks,
Rama

Is there any way that I can specify that the jws
application manager be started at the machine boot
time/ restart time?It is just a simple program (javaws[.exe]).
Just put it wherever one puts programs for startup on your os (Startup folder under Win32, script in one of the rc.d dirs under Unix)
Regards,
Marc

Similar Messages

Hp pavilion pv 6700 booting time off and turn on automatically.view hardware problem

hp pavilion pv 6700 booting time off and turn on automatically.view hardware problem

the fan is not working will or the processur part drae

G3BW cryptic message at boot time - Help!

Hi
I have just bought a BW G3 from someone on eBay and when I boot up the progress indicator just turns and turns. I googled for boot time options and found out about Command V to see what the mac is doing. I see the following lines repeatedly after the initial stuff.
date time localhost init: getty repeating too quickly on port /dev/console, sleeping
then
date time localhost /usr/libexec/crashreporterd : crashdump terminated by signal 5
all very nice if your into this kind of thing, but I just want to surf the net.
Any help is gratefully received.
Thanks
Marcus

Marcus,
Yes, that is a start. You will need something else as a boot CD. The Mac Mini boot disk will be too new and other things need to happen to the G3 before any verson of OS X will start up your machine.
Do you have a SCSI card? Does not sound like it from your list. A SCSI card would allow you to boot from an external drive.
The simplest solution would be to find a retail, universal system install CD. Here is one example:
http://www.applerescue.com/
I would go with a version of 9.1 or better while you are spending money. Here is the next page:
http://www.applerescue.com/page2/page2.html
Unfortunately, some sources have become extremely expensive. If you get lucky and find an inexpensive 8.5 install disk you can update to 8.6 online.
A quick view of eBay shows some affordable options to "buy now" for under $30 US. One Yahoo list had things selling at $149. Cheaper to buy another Mac and make sure it has working software with it.
Good luck,
Jim

How do I start slapd at boot time in leopard?

Greeting,
Forgive me if this is the wrong forum/community.
I want to start slapd at boot time on my new leopard upgrade. On tiger, it was as simple as having an LDAPSERVER=-YES- line in /etc/hostconfig. That does not seem to work for leopard. I can run slapd from the command line. I needed to make changes to the slapd.conf tiger version and reload my database, but all is working fine. I just have not been able to get the deamon to start at boot up. It must be simple. Any ideas?
Thanks,
--Linn

Texas Mac Man,
Thanks. Slapd is the OpenLDAP daemon (server) delivered with MacOS, even Client. No, starting at the user level is not what I need. I can already do that in a terminal window with /usr/libexec/slapd, after I get su'ed to root.
Think Unix, not iApps. When the system boots up, there should be scripts available to start specific daemons. I am looking for hints there.
BDAqua,
Thanks. I had seen that first discussion before. It deals with slapd failing when it tries to start on MacOS Server... where all these daemons indeed start at boot time. I am just trying to figure out how to do in leopard what I successfully did in tiger, namely start /usr/libexec/slapd at boot time.
And note, this is not an issue with slapd failing due to slapd.conf or database problems. All works fine from the user lever start.
Thanks,
--Linn

U410 increased boot time .

Hello , i own a lenovo u410 .. like 1-2 months back my machines boot time increased a lot .. that time i found that the ssd was not working properly so got it replaced .
Now however the boot time has again increased, the ssd works as intel rapid storage technology also works .
I dont know why the boot time has shot up so much to like 2 minutes , earlier it was max 30 seconds .
Any solutions ?

The disk may have a few bad sectors, probably where the OS files are stored. You can try to repair it using a third party utility such as Disk Warrior. But be sure to backup everything first.

How to change loacalization of time capsule and other wifi hardware

I have several apple machines like, time capsule and airport extreme from different countries around the world. In a globalized world I move every 3-4 years to a new country/region. In the wifi setup of the time capsule and the airport extreme you'll only find 5 or six countries (china, Korea, Japan, chile...) but nothing about Morocco or any european country. So when you try to set "restricted access" between 1 to 5 p.m., your regional setting is China, but you live some where in Europe, there is a time difference of several hours you have to take into consideration. That is a bad joke.
There is no way of choosing a different location or setting the time as far as I know inside the setup.
Any ideas, before I sell all my Apple stuff and buy Samsung or Fujitsu?

Hi, you must go to Airport Utility, and in menù Disk you can change the name.
Sergio

I have a power mac G5. It boots up fine and then a screen comes down and in a bunch of different languages tells me the machine needs to be restarted. At this point everything is frozen. I have done this a number of times and I get the same thing.

I have a power mac G5. It boots up fine and then a screen comes down and in a bunch of different languages tells me the machine needs to be restarted. At this point everything is frozen. I have started the machine up a number of times and I get the same thing. Anyone have any ideas?

Does it boot from the Install Disc OK?
Does it boot into any of these modes?
Holding Option/alt key at bootup.
Holding SHIFT key at bootup.
Target mode...
http://support.apple.com/kb/HT1661
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
We might get clues with verbose mode...
http://support.apple.com/kb/HT1492

Time Machine Restore Mangles Permissions and Groups

Circumstance:
My Macbook Pro running 10.5.5 gave a gray spinner after a restart last week. The restart was to clear out a couple of system processes eating up CPU when I had left it alone for a few hours.
Action:
After Disk Utility, zapping PRAM, and the probably some other standard trouble-shooting actions didn't fix the stuck start-up problem, I decided to try a full system restore from my Time Machine backups. I had previously successfully restored individual folders and files. Time Machine backs up wireless to a USB hard drive connected to my AirPort Extreme. To speed up the restore, I ran an Ethernet cable to the MBP from the Airport. The restore completed successfully. All the folders & files are correct, looks the same, etc. I restarted using the restored boot drive.
Problem:
The MBP is like a museum now--I can look but I can't touch. I first noticed something was wrong after logging in the first time because I couldn't move a file into a folder via drag-n-drop. Then Terminal went into a spinning beach ball when I opened it. Spotlight was not running. Then I noticed that my entire boot disk was read-only. I got info on the boot disk, and the Users & Groups list was strange--everyone was read-only, "wheel" had read-write and was the owner, and staff had read-write. Basically, it's like me, the Finder, an all applications have lost all their write/execute permissions on the entire drive.
*Unsuccessful Steps Taken:*
Ran Disk Utilities' Repair Permissions from Leopard dvd. Ran fsck -fy after mount / -uw from Leopard dvd Terminal and from single-user boot mode. Time Machine restore direct from TM disk via USB. Joined my user to wheel group. Changed my user password from Leopard dvd (which repairs home folder permissions). Played with chown to make all wheel-owned items staff-owned.
*Open Theories:*
Airport Time Machine restores strips ACLs and Permissions. I have to restore over wireless, not ethernet or usb. My TM backup is screwed up somehow.
Whew. This has been going on for a while, so I'm ready to give up and do an Archive & Install and begin manual migration from the backups, but my MPB is a fine-tuned machine and I hate to lose that, especially since it taunts me by being so close to normal (I can see everything! My desktop background and apps are there!).
Any help much appreciated!

The "full restore" from Time Machine is only for OSX drives.
For data-only drives, use the Time Machine browser (the "Star Wars" display). See Time Machine - Frequently Asked Question #15.
Depending on your setup, you may also want to review Transferring Home Folders not on a Startup volume.

External Drive with Time Machine, booting from external drive with utilitie

I'm using Time Machine now with
a LaCie 1TB external hard drive.
Everything works fine.
But, I've been wondering:
Can I place a program like TechTool
on the external drive (that Time Machine uses)
and boot from that external drive.
I would like to be able to do that,
because diagnostics and repair programs
only works properly and fully when they run from
external drives. Anything on the internal drive can be repaired
and examine. Impossible to do if Techtool is on the same
drive that's been examined.
Any thoughts as to what I should do?
Thanks
iMac, Leopard, Time Machine, Lacie Quadra 1TB drive.
P.S. Stupid question: If my computer crashes, and I reboot from Time Machine
(from the external drive) how does the computer know which backup to take ?!?
Isn't there many versions of the OS on the Time Machine backup taken at different times?

pitou wrote:
P.S. Stupid question: If my computer crashes, and I reboot from Time Machine
(from the external drive) how does the computer know which backup to take ?!?
Isn't there many versions of the OS on the Time Machine backup taken at different times?
As V.K. says, you can't boot from TM backups.
But you can restore your entire system from any one of them, per the procedure in #14 of the Frequently Asked Questions *User Tip,* also at the top of this forum.
You can also selectively restore from them, while running normally. See #15 in the FAQ Tip.
You might want to review these:
Time Machine Tutorial
Time Machine 101
How to back up and restore your files
Time Machine Features
Apple - Support - Mac OSX v10.5 Leopard Time Machine
and perhaps browse the rest of the FAQ Tip.

Hard drive not accessible at boot time. Machine won´t boot into Windows.

Greetings,
I am trying to troubleshoot an HP Mini 110-1000 (actually a refurbished HP Mini 110-1033 CL PC).
When the machine boots, it attempts to connect to the network and the process hangs. I booted into BIOS to attempt changing the boot sequence to another device such as the hard disk or USB. None where found. Then, I tried to perform diagnostics on the hard drive. It was not found.
My guesses are:
1. The hard drive is disconnected
or
2. The hard drive is broken
or
3. All of the hardware devices are disconnected.
or
4. The mother board is broken.
I would appreciate some feedback before I start disassembling the machine. I would just go ahead, but the fact that
none ofthe input devices are seen at boot time makes me believe that this is a mother board problem.
In any case, a re-install of the OS is apparently in store, and I don´t have the original install disks...
Thank you for your help and feedback.
Regards,
Jean-Pierre

Hi,
Please use the following instructions to fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443463&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_in...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Slow Boot Times after installing new SSD and Lion

Can anyone please help interpret why I'm having slow boot times? I have copied my console printout during the boot and it seems to be doing a repetitive action while booting.
Thanks
13-01-04 2:50:24.000 AM bootlog: BOOT_TIME 1357293024 0
13-01-04 2:50:25.000 AM kernel: Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
13-01-04 2:50:25.000 AM kernel: vm_page_bootstrap: 942160 free pages and 32688 wired pages
13-01-04 2:50:25.000 AM kernel: kext submap [0xffffff7f80736000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000736000]
13-01-04 2:50:25.000 AM kernel: zone leak detection enabled
13-01-04 2:50:25.000 AM kernel: standard timeslicing quantum is 10000 us
13-01-04 2:50:25.000 AM kernel: mig_table_max_displ = 73
13-01-04 2:50:25.000 AM kernel: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
13-01-04 2:50:25.000 AM kernel: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
13-01-04 2:50:25.000 AM kernel: calling mpo_policy_init for TMSafetyNet
13-01-04 2:50:25.000 AM kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
13-01-04 2:50:25.000 AM kernel: calling mpo_policy_init for Sandbox
13-01-04 2:50:25.000 AM kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
13-01-04 2:50:25.000 AM kernel: calling mpo_policy_init for Quarantine
13-01-04 2:50:25.000 AM kernel: Security policy loaded: Quarantine policy (Quarantine)
13-01-04 2:50:25.000 AM kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
13-01-04 2:50:25.000 AM kernel: The Regents of the University of California. All rights reserved.
13-01-04 2:50:25.000 AM kernel: MAC Framework successfully initialized
13-01-04 2:50:25.000 AM kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
13-01-04 2:50:25.000 AM kernel: IOAPIC: Version 0x11 Vectors 64:87
13-01-04 2:50:25.000 AM kernel: ACPI: System State [S0 S3 S4 S5]
13-01-04 2:50:25.000 AM kernel: PFM64 (36 cpu) 0xf10000000, 0xf0000000
13-01-04 2:50:25.000 AM kernel: [ PCI configuration begin ]
13-01-04 2:50:25.000 AM kernel: console relocated to 0xf10010000
13-01-04 2:50:25.000 AM kernel: PCI configuration changed (bridge=1 device=1 cardbus=0)
13-01-04 2:50:25.000 AM kernel: [ PCI configuration end, bridges 5 devices 24 ]
13-01-04 2:50:25.000 AM kernel: AppleIntelCPUPowerManagement: (built 16:32:09 Aug 23 2012) initialization complete
13-01-04 2:50:25.000 AM kernel: mbinit: done [64 MB total pool size, (42/21) split]
13-01-04 2:50:25.000 AM kernel: Pthread support ABORTS when sync kernel primitives misused
13-01-04 2:50:25.000 AM kernel: TBIOBlockStorageDriver: super::probe failed
13-01-04 2:50:25.000 AM kernel: TBIOBlockStorageDriver: super::probe failed
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeZlib kmod start
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeDataless kmod start
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeZlib load succeeded
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeDataless load succeeded
13-01-04 2:50:25.000 AM kernel: AppleIntelCPUPowerManagementClient: ready
13-01-04 2:50:25.000 AM kernel: BTCOEXIST off
13-01-04 2:50:25.000 AM kernel: wl0: Broadcom BCM432b 802.11 Wireless Controller
13-01-04 2:50:25.000 AM kernel: 5.106.198.19
13-01-04 2:50:25.000 AM kernel: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID e80688fffec0e9d0; max speed s800.
13-01-04 2:50:25.000 AM kernel: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
13-01-04 2:50:25.000 AM kernel: com_seagate_IOPowSec00_10_5: GetVendorAndModelIDInfo failed
13-01-04 2:50:25.000 AM kernel: com_maxtor_IOPowSec00_10_5: GetVendorAndModelIDInfo failed
13-01-04 2:50:25.000 AM kernel: rooting via boot-uuid from /chosen: 1052015E-B101-3046-8932-5C6B1E6A7995
13-01-04 2:50:25.000 AM kernel: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
13-01-04 2:50:25.000 AM kernel: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@A/AppleMCP89AHCI/PR T1@1/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/M4-CT256M4SSD2 Media/IOGUIDPartitionScheme/Imipenem (SSD)@2
13-01-04 2:50:25.000 AM kernel: BSD root: disk0s2, major 14, minor 2
13-01-04 2:50:25.000 AM kernel: Kernel is LP64
13-01-04 2:50:25.000 AM kernel: [IOBluetoothHCIController::setConfigState] calling registerService
13-01-04 2:50:25.133 AM com.apple.launchd: *** launchd[1] has started up. ***
13-01-04 2:50:25.491 AM com.apple.launchd: (com.apple.powerd) Unknown value for key POSIXSpawnType: Interactive
13-01-04 2:50:25.491 AM com.apple.launchd: (com.apple.sandboxd) Unknown value for key POSIXSpawnType: Interactive
13-01-04 2:50:25.987 AM UserEventAgent: starting CaptiveNetworkSupport as SystemEventAgent built May 25 2011 12:27:35
13-01-04 2:50:25.990 AM UserEventAgent: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-01-04 2:50:25.992 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:25.992 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:26.000 AM kernel: BCM5701Enet: Ethernet address c4:2c:03:01:22:c1
13-01-04 2:50:26.000 AM kernel: AirPort_Brcm4331: Ethernet address f8:1e:df:eb:b4:37
13-01-04 2:50:26.000 AM kernel: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
13-01-04 2:50:26.000 AM kernel: IO80211Interface::efiNVRAMPublished():
13-01-04 2:50:27.025 AM airportd: _processDLILEvent: en1 attached (down)
13-01-04 2:50:27.274 AM com.apple.SecurityServer: Session 100000 created
13-01-04 2:50:27.000 AM kernel: in func createVirtualInterface ifRole = 1
13-01-04 2:50:27.000 AM kernel: Created virtif 0xffffff800bdffa00 p2p0
13-01-04 2:50:27.349 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-01-04 2:50:27.607 AM com.apple.SecurityServer: Entering service
13-01-04 2:50:27.749 AM UserEventAgent: ServermgrdRegistration cannot load config data
13-01-04 2:50:27.779 AM UserEventAgent: get_backup_share_points no AFP
13-01-04 2:50:28.000 AM kernel: NVDANV50HAL loaded and registered.
13-01-04 2:50:28.000 AM kernel: Previous Shutdown Cause: 5
13-01-04 2:50:28.000 AM kernel: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
13-01-04 2:50:28.000 AM kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
13-01-04 2:50:28.332 AM com.apple.launchd: (com.sec.faxdb[73]) open("/Library/Logs/Samsung/MacFax/FaxDB.log", ...): No such file or directory
13-01-04 2:50:28.333 AM com.apple.launchd: (com.sec.faxdb[73]) open("/Library/Logs/Samsung/MacFax/FaxDB.log", ...): No such file or directory
13-01-04 2:50:28.347 AM com.apple.pfctl: No ALTQ support in kernel
13-01-04 2:50:28.347 AM com.apple.pfctl: ALTQ related functions disabled
13-01-04 2:50:28.363 AM com.apple.launchd: (com.sec.faxdb[73]) posix_spawn("/Library/Printers/Samsung/Fax/FaxDB/faxdbd", ...): No such file or directory
13-01-04 2:50:28.385 AM com.apple.ucupdate.plist: ucupdate: Checked 1 update, no match found.
13-01-04 2:50:28.385 AM com.apple.launchd: (com.sec.faxdb[73]) Exited with code: 1
13-01-04 2:50:28.385 AM com.apple.launchd: (com.sec.faxdb) Throttling respawn: Will start in 300 seconds
13-01-04 2:50:28.606 AM mDNSResponder: mDNSResponder mDNSResponder-320.16 (Jul 19 2012 21:07:07) starting OSXVers 11
13-01-04 2:50:28.704 AM com.apple.revisiond: 2013-01-04 02:50 revisiond[52] (CarbonCore.framework) implementation_callback_rpc: ERROR: CFDictionaryGetValue(FSEvents_streamDict, cfPortNumber) => NULL
13-01-04 2:50:28.705 AM com.apple.usbmuxd: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
13-01-04 2:50:28.814 AM configd: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
13-01-04 2:50:28.814 AM configd: DHCP en1: INIT-REBOOT transmit failed
13-01-04 2:50:28.837 AM systemkeychain: done file: /var/run/systemkeychaincheck.done
13-01-04 2:50:28.880 AM mds: (Normal) FMW: FMW 0 0
13-01-04 2:50:28.938 AM mDNSResponder: D2D_IPC: Loaded
13-01-04 2:50:28.938 AM mDNSResponder: D2DInitialize succeeded
13-01-04 2:50:28.990 AM configd: setting hostname to "Karr-Hong-Lees-MacBook-Pro.local"
13-01-04 2:50:29.000 AM kernel: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key MOTP (kSMCKeyNotFound)
13-01-04 2:50:29.000 AM kernel: DSMOS has arrived
13-01-04 2:50:29.000 AM kernel: macx_swapon SUCCESS
13-01-04 2:50:29.031 AM configd: network configuration changed.
13-01-04 2:50:29.984 AM loginwindow: Login Window Application Started
13-01-04 2:50:30.091 AM com.apple.launchd: (com.sec.faxdb) Throttling respawn: Will start in 299 seconds
13-01-04 2:50:30.142 AM netbiosd: Unable to start NetBIOS name service:
13-01-04 2:50:31.000 AM loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
13-01-04 2:50:31.000 AM kernel: en1: 802.11d country code set to 'US'.
13-01-04 2:50:31.000 AM kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
13-01-04 2:50:31.282 AM loginwindow:
O3REQUIRE FAILED: ret == 0
   - file: /SourceCache/BezelServices/BezelServices-232.3/Utilities/Utilities.c
   - line: 91
13-01-04 2:50:31.282 AM loginwindow: Failed to lookup Bezel UI Server port: Bootstrap Unknown Service.
13-01-04 2:50:31.315 AM com.apple.SecurityServer: Session 100004 created
13-01-04 2:50:31.317 AM loginwindow: Login Window Started Security Agent
13-01-04 2:50:31.347 AM com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
13-01-04 2:50:31.542 AM SecurityAgent: Echo enabled
13-01-04 2:50:31.542 AM SecurityAgent: Echo enabled
13-01-04 2:50:31.574 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:31.574 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:31.575 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 10)
13-01-04 2:50:31.575 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 10)
13-01-04 2:50:32.000 AM kernel: MacAuthEvent en1   Auth result for: a8:39:44:57:2c:50 MAC AUTH succeeded
13-01-04 2:50:32.000 AM kernel: wlEvent: en1 en1 Link UP virtIf = 0
13-01-04 2:50:32.000 AM kernel: AirPort: Link Up on en1
13-01-04 2:50:32.000 AM kernel: en1: BSSID changed to a8:39:44:57:2c:50
13-01-04 2:50:32.530 AM airportd: _doAutoJoin: Already associated to “TELUS3939”. Bailing on auto-join.
13-01-04 2:50:33.000 AM kernel: AirPort: RSN handshake complete on en1
13-01-04 2:50:34.579 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:34.579 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:34.579 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 9)
13-01-04 2:50:34.579 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 9)
13-01-04 2:50:35.093 AM configd: network configuration changed.
13-01-04 2:50:35.113 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
13-01-04 2:50:35.114 AM UserEventAgent: CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
13-01-04 2:50:35.114 AM UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on TELUS3939 because it is protected and not on the exception list
13-01-04 2:50:35.116 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
13-01-04 2:50:35.118 AM configd: network configuration changed.
13-01-04 2:50:35.991 AM ntpd: proto: precision = 1.000 usec
13-01-04 2:50:37.270 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:37.271 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:37.271 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 8)
13-01-04 2:50:37.271 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 8)
13-01-04 2:50:40.276 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:40.276 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:40.276 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 7)
13-01-04 2:50:40.276 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 7)
13-01-04 2:50:43.281 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:43.281 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:43.281 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 6)
13-01-04 2:50:43.282 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 6)
13-01-04 2:50:46.286 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:46.286 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:46.286 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 5)
13-01-04 2:50:46.286 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 5)
13-01-04 2:50:49.291 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:49.291 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:49.291 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 4)
13-01-04 2:50:49.291 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 4)
13-01-04 2:50:52.296 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:52.296 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:52.296 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 3)
13-01-04 2:50:52.296 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 3)
13-01-04 2:50:55.301 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:55.301 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:55.301 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 2)
13-01-04 2:50:55.301 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 2)
13-01-04 2:50:58.307 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:58.307 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:58.307 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)
13-01-04 2:50:58.307 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)

Fixed it!
Just changed my settings to auto log on.
Hooray!

Macbook Pro Boot time and general response time slow.

I'm running 10.9 Mavericks.
Yesterday as I was doing my every day activites I realized randomly my macbook pro began preforming extremely poorly.
My problems:
Boot time now takes 2-3 minutes.
Applications take 2-3 minutes to open.
Applications will say they're open sometimes but will not display.
Applications will take several tries to quit.
Applications, especially Safari, will randomly crash.
Everything is slower and takes a while to do, even opening a simple folder will take a minute.
The things I have tried:
I ran a Hardware test and the results showed it is not a hardware problem.
I have reset the SMC and PRAM and the problems still occur.
I have Verified and repaired the Disk/Permissions, however it seems to stop mid-way through (after about an hour).
I can't seem to figure out what's wrong with it. I can re-install the OS but with my internet it is estimated to take 8 hours.
Any suggestions?

Your disk may be failing. Do not attempt to resintall the OS until your disk is healthy.
Backup your data immediately:
Before proceeding you should make sure you have a current backup. If it has been getting slower over time your disk could be a failing slowly. SATA drives have two retry modes: short and long. They can continue operating as read errors are increasing. The long retry cycle is very long and can cause significant performance degradation. If it has started long retries then it is likely to get worse and eventually fail. SSDs also have a failure mode where the fail slowly.
Time Machine Basics: http://support.apple.com/kb/ht1427
Most commonly used backup methods:
https://discussions.apple.com/docs/DOC-3045
Methodology to protect your data. Backups vs. Archives. Long-term data protection:
https://discussions.apple.com/docs/DOC-6031
Make a Genius Bar reservation http://www.apple.com/retail/geniusbar/ .
or find an Apple Authorized Service Provider https://locate.apple.com/country
If it is a failing disk, consider an upgrade to a 1 TB, 7200 RPM disk. Check out a one terabyte HGST 7K1000 7200 rpm, SATA III drive from OWC or consider an SSD.

IMac crashing randomly and slow boot time.

My mid 2011 27" 2.7GHz i5 iMac has been crashing/powering off to black screen randomly. Apple just replaced the logic board and power supply last week. I have not had any more crashes yet, but on startup I get a white screen that will last for 1 whole minute at times before I finally get the Apple logo to appear. Can someone please tell me about how long my boot time should be and what could be the problem. Also my Mac keeps not seeing my External Hard drive Time Machine Backup. It will be working fine and then act like the drive is not connected. This seems to have started after Apple replaced my logic board and power supply. This is my first Mac ever and Im starting to get really frustrated!

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Time Capsule and time machine with third party router

Hi,
This is the first time I use this site.
I have over three years old Mackbook.
APP has expired.
Now I want to know how to set up time capsule in a new environment.
I moved from Australian and Singapore.
I was using Time Capsule and Airport Extreme in Australia.
I have moved to Singapore.
I am using router provided by Singtell(Singapore Telecommunication). I do not have an Airport Extreme anymore. My housemate and I are using wireless internet-sharing. Needless to say that internet provider is SingTell.
Now I would like to know how to use time capsule and time machine with the network created with a router provided by SingTell.
What I did so far is;
Connected the time capsule to the power point.
Orange lamp lit and flashed for a few second and stop. Orange lamp stayed on.
Apple Utility does not recognise Time Capsule.
I prefer to use it wirelessly.
There are only two USB cable ports installed.
One is used to synchronize iPhone.
Other is used for a printer.
but if it is not possible, wired would be OK.
MacBook 13 inch 2.0 GH Late 2006
I hope that someone able to give me an answer for this.
Cheers,
morepubholidays

In this case the apple support people reveal a truly poor understanding.
You must bridge something.. you either bridge the TC.. which 90% of people do.. or you bridge the dsl router.. which some people do manage to do.. You will have to look that up for your modem and check with verizon if they support pppoe authentication.
IMHO just bridge the TC as you were told not to do.. as they are simply wrong about that.
If you already tried this and it didn't work.. try again.. it is the correct approach.
You have no choice. But this time let me suggest you do it using the 5.6 airport utility.. as the apple toyland v6 airport utility is likely half your trouble.
So here is how to get the utility into your computer.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0
Then open the manual setup on the 5.6 utility.. go to internet tab. Connection sharing.. off bridged mode.
Select this and update..
Then all your IP addresses will be wrong.. I suspect this is where things are going wrong.. and messing you up.
Once the TC is bridged.. turn off everything and restart.. in correct order.. modem.. TC.. client computers etc. 2min gap between each.

2TB Time Capsule and Time Machine on Snow Leopard 10.6.1 slooooooow

I have a 2TB Time Capsule on a 100Mps LAN that is shared by my Mac Pro and an iMac G5. No USB devices are connected to the Time Capsule. The Time Capsule and both computers are connected to the LAN through a LinkSys 8-port Cable/Router/DHCP.
While in Time Machine (about 30 backup folders) looking for a file to restore, it takes 2-5 minutes for Time Machine to change between backups. The time line on the right responds extremely slowly.
Whether or not the iMac is backing up has no effect.
Is this normal?
Thank you,
Don

See: http://www.codedifferent.com/2009/09/02/howto-reactivate-your-kyocera-printer-un der-mac-os-x-snow-leopard/
We have a KM-2550 and this solved it. HTH.

Machine boot time, rcscripts and jws

Similar Messages

Maybe you are looking for