Machine statistics paging and run queue

Hi,
we have databses in 10g R2 on Windows 2003 server. We have DB grid control for each ( but not OEM 10g). We can not see machine statistics paging and run queue in performance tab. Is it normal ? and only OEM 10g can present it ?
Many thanks.

Hi,
we have databses in 10g R2 on Windows 2003 server. We
have DB grid control for each ( but not OEM 10g). You have "DB grid control for each ( but not OEM 10g)." ?

Similar Messages

Upgrading my intel iMac to internal SSD and running 1TB external drive from firewire 800 for mass storage while still using a second external drive for backups...my goal-speed with a SSD, to still have 1TB of room for everything i have now..possible?

I seem to kill HD's every two years...the last two i've installed were WD Caviar Black 1TB 7200rpm 3.5" drives. The speed gains over stock drives have been remarkable. I don't blame the drives for the failures, my machines are up and running 16 hours a day, every day, year round. They die from 'mileage' so to speak...i assume...there's no viral acvtivity or questionable downloads to gunk things up...just lots of work.
I have my third new drive ready to install in my intel based iMac...but i've had a thought...I want to install a SSD in my iMac for the speed gain (and recent price drops)...for standard storage i want to use this new WD Caviar Black 1TB in an external drive bay and connect via firewire 800 for storing everything except the OS and my most commonly used software...am i crazy? will the firewire 800 external drive negate the speed gained with an internal SSD??
I have four iMacs in my office, and one at home. I buy second hand and install new drives and boost memory. I'm going to do this on my 'home' machine...if it works out well i want to upgrade the other three this way...but first i need to know if i'm just dreaming, or will it really make a difference? or even possible??
Thanks!
2.66 intell core2duo
2009 iMac
8gig ram
1 gig hd
OSX ver. 10.8

The SSD gives great bootup and Application launch speed. I think it also speeds up the video rendering a bit, I do all that on the SSD and then move the finished project to the external drives. As far as the speed for the external drives they are quick enough for viewing video and the file transfer rate is good. I had initially put the SSD into an external cradle (FW800) and the system was faster than on the internal drive. I only got a 1.5GBs SATA drive, perhaps yours could benefit from the 3GBs. I know the 6GBs would be too fast and costs a lot more, even the MacPros need special hookups to make use of the 6GBs.

Time Machine, Folder sync and iDisk

Hi, I've been using the local iDisk sync to store my files but I fear they may be deleted when some sync fails (again) so I would like to have Time Machine. I moved my files to the Documents folder in my Home folder to have Time Machine but I would like it to be synced with the Documents folder in my local iDisk in order to be synced "to the cloud". On the other computers I would sync the Documents folders (Home and iDisk) so I have Time Machine too.
What I plan to accomplish is to sync the files from Documents -> Documents (iDisk) -> Cloud -> Documents (iDisk) -> Documents and the other way around.
I would like some help, an idea of a sync program that could sync the folder with the local iDisk everytime it was changed so the sync is automatic.
Info: Time Machine is up and running, iDisk local sync is activated, all updates are installed - on all of the Macs and there are 5 computers: MacBook, MacBook Air, MacBook Pro, iMac, Dell PC running XP with mapped iDisk and offline copy.
Info2: Anything that costs more than $25 or is not incremental copy is out of question (slow internet and low budget-ironically)
Message was edited by: Eduardo Araripe

Using Sync Two Folders. Not the best option but...

I'm told there is a virus associated with Adobe Reader. How can I tell if my machine is effected and if so what is the cure. I'm running OS X10.6.8 on an iMac with safari 5.1.5

I'm told there is a virus associated with Adobe Reader. How can I tell if my machine is effected and if so what is the cure. I'm running OS X10.6.8 on an iMac with safari 5.1.5

There are no viruses currently affecting the Mac but there is something called Flashback which is malware that has been doing the rounds and affected many Mac users. Apple have released some updates to Java that should remove it and improve protection. Run Software Update to see if there is anything for downloading.
A few precautions that can help prevent your Mac becoming infected:
If you use Flash only download it directly from Adobe.
In all web browsers disable Java (but do leave Javascript on as that's something else).
In all web browsers make sure downloaded files aren't set to automatically open after downloading.
Consider disabling Java completely (launch Java Preferences in the Utilities folder and disable it - you'll likely rarely, if ever need it. If you do just turn it on and off again when your done).
You can also check out this link:
http://lifehacker.com/5900434/how-to-find-out-if-your-mac-was-infected-by-the-fl ashback-trojan-in-one-click

Is it possible to make an image of a MBP, and run it as a virtual machine?

Is it possible to create an image of an exitsting MBP, transfer the image to another system or server, and run that image as a virtual machine? If so, how?
Thank you

Mac OS X will not run in a virtual machine, except as 10.6 Server:
https://discussions.apple.com/docs/DOC-6841

In Lion, Time Machine seems to be perpetually running - and running slowly

Up through Snow Leopard, Time Machine did its incremental backup every hour quickly and stopped.
Since upgrading to Lion back in July, Time Machine seems be be running almost all the time - and very very very slowly. There doesn't seem to be any exessive Spotlight indexing going on anymore. That was long ago. So I don't think that's it.
Preparing for backup takes a long time. It take hours to eke through the backup itself, even if there weren't many changes, and finishing backup takes a long time.
I would say each backup, no matter how small, takes more than three hours.
At these forums there seems to be lots of discussion threads about this, and help pages linked to, but the suggested solutions seem to be a jumble, with some people saying they worked and many saying it didn't.
I did do a disk repair on the Time Machine volume just in case. And there is nothing else on that drive except for Time Machine backups. The drive is directly connected to my iMac (3.06 GHz Dual Core Duo, 12 GB RAM). While not vital, I'd rather not reformat the drive and lost all my old backups, which go back over a year. If I knew for sure that was the solution I'd do it. But in the discussions here there are people who seem to have tried that and reported back that it didn't help.
Right now it says it's backing up 3.5 MB of 132.9 MB - and taking forever to do it.
I know that since the last backup I haven't changed anywhere near 132.9 MB of data. Unless Lion is making massive behind-the-scene changes.
Something definitely seems to be wrong with Time Machine in Lion.
Have there been any additional thoughts on this? Is Time Machine just buggy in Lion?
Thanks,
doug

I feel ya, dawg, as they say. Right now I'm running a backup that has taken 43 minutes thus far. On an idle machine, it backed up 29.8 MB (17,949 files) followed by 19.5 MB (17,256 files). 12 min. for the first batch, 11 min., for the second. 13 min. of "Finishing backup" until it transitioned to "Cleaning up," which just completed after 12 min. Each backup typically goes 70–90 minutes. So backups are running for 65% – 80% of the time, if I leave TM running. I don't; instead, I turn on backups before going to bed, and turn them off on the first happy occasion when I notice that TM is idle.
TM backups have been behaving this way for about 2 months. Before that they were as speedy as Snow Leopard, for a couple of weeks. Before that they were taking 3 hours with the dreaded "Waiting for index to be ready" messge repeating for on hour or more. I fixed this latter problem by "trying everything" from http://pondini.org/TM/D2.html (a fine resource but, as you say, all over the map as all of the suggestions are).
TM in Lion is hosed. It's as simple as that.

HT1338 I have MacBook with OS 10.5.8. Is there any way for me to install and run keynote on this machine? Do I need to upgrade OS and how? Thanks

I have MacBook with OS 10.5.8
Is there any way for me to install and run Keynote on this machine? Thanks

Welcome to the Apple Support Communities
Keynote '09 is compatible with your computer, but you won't get the latest Keynote version running that version. As you have an Early 2008 MacBook, first I recommend you to update to Mac OS X Snow Leopard to get newer versions of all applications but without losing any applications > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Make a backup before upgrading.
The DVD contains Mac OS X 10.6.3, so after upgrading, open  > Software Update to update to 10.6.8. Then, you will get access to the App Store.
However, the Keynote version available in the App Store is only compatible with OS X 10.7.5 or newer, so now you have two options:
1. Upgrade to OS X Lion and purchase Keynote from the App Store.
2. Keep Mac OS X Leopard or Snow Leopard, and buy Keynote on a DVD in eBay or Amazon. Note that you won't be running the most recent Keynote version, but it doesn't mind (the latest version only adds iCloud support)

Where can I find info on how to install and run Snow Leopard Server as virtual machine inside Mountain Lion

Where can I find info on how to install and run Snow Leopard Server as virtual machine inside Mountain Lion

Here is the short answer:
Installing Snow Leopard Server into Parallels 10 for DUMMIES:
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564

How to test oracle is up and running in remote machine using shell script

Hello,
I need help to write an linux script.
I have a java application server running on machine 192.168.5.20 and our oracle 10g standard 1.0.2 is running on machine 192.168.5.21.
I have found script to start oracle when computer is turned on.
But I cannot start my application server automatically since it depends on whether oracle is up and running or not on the remote machine.
Therefore, in case of power failure or maintenance, our client has to call us to start application server.
I would be grateful if someone can help me "How can I write script to check oracle is up and running in machine 192.168.5.21 from machine 192.168.5.20.
For your information, I have no oracle installed in application server. So tnsping won't work.
What I want is when power is back, application server script automatically and tesing for oracle server is up and running. If it is up, script will start application server.
Thanking you.

Hi,
It's not failover or experimental. My application server uses JBOSS and JBOSS needs database name to start up. My enviroment is LAN. My database is in different machine as I mentioned before. So In case of power failure, I need to start my application server (JBoss) manually, because I need to confirm that oracle is already running before start app server.
I want an automated script (when power is just on) to start my application server which will wait to check if the datbase server is up I will start application server.
The scripts given above It works if appserver and db server in the same machine (my development machine).
But when I test the script in my production applicaiton server, It shows sqlplus command not found (my app server does not have any oracle client installed).
About hostname yes My applicaiton server hostname is hostapp1 and dabase server hostname is hostdat1.
Do you think Is it possible to test the script without oracle client not installed. or It has to be done writing code like java program and test using jdbc connection.
Best regards.

Debug and run programs in virtual machine

hi everyone
how are you
i want to know if there is any way to debug and run programs on visual studio to a virtual machine with a specific operating system i`m using visual studio 2013 ultimate in 64 based windows 8.1 system
thanks

but can you explain to me how can i configure remote debugger to run and debug to a virtual machine
You treat the VM as though its any other real machine on your network.
See the article I linked.
im using Vm workstation 11 and windows xp running on it
It's been a while since I used VMWare WS and I have a vague
recollection that it may have some special facility for debugging with
VS - but I never used it.
also i want to know if i can run and debug to another computer on the same network
Yes, you can - if the OS is supported by the version of VS you're
using.
Dave

Can the boot camp partition be resized once windows is installed and running as virtual machine using vm fusion ware?

I have macbook air partitioned 505/50 and running OSX and win 7 side by side as virtual machines using vm fusion. Can the partition size be changed without starting over?

Very helpful. I started with vm ware to create a pseudo drive but could not import win 7 over home network. mac has no immediate way to connect to network without adapter, and has no cdrom. So i used boot camp to create partition, then made a bootable win7 iso file on a memory stick using win 7 usb/cdrom download tool from microsoft, and rEFIT to get mac to boot from the mem stick into the dos partition. Then i ran vm fusion to import the win 7 partition as a virtual machine. OSx and win 7 run side by side.
Seems from what you say that sizing cannot be accomplished without deleting partition and starting over. If I start over and just run vm fusion to create he win7 virtual machine, not sure how I would bet the minimum win 7 os into the ac. Perhaps vm will boot from the mem stick using refit. Do you know?

Compiling on a dual core machine and running the class files on linux.

does compiling on a dual core machine and running the class files on linux have any effect?

well, the problem that i felt was that when i runmy
class files on my machine(windows xp, dual core),
Thread.sleep(60000) sleeps for 1 minute. but wheni
run it on a linux machine, Thread.sleep(60000)sleeps
for 2 minutes. my application has a lot ofthreads.
I can't be 100% sure, but I'm pretty sure that
sleep(60000) doesn't sleep for 2 minutes on the other
machine.I, wholeheartedly, agree.
Due to timing issues it may seem to sleep a few milliseconds more, but not double.
Of course, if there is a "real-time" (or even simply higher than the Java app) priority program running that is using a lot of the CPU it may seem like it sleeps a lot longer than 60000, but that is a different issue.

IPhoto6 - after a full reistall of Snow Leopard, iphoto does not display thumbnails. I've restored from time machine, rebuilt the library and run through the rebuild thumbnails function with no success. The files are there, I just get a dotted outline.

iPhoto6 on iMac running SL - after a full reistall of Snow Leopard, iphoto does not display thumbnails. I've restored the library from time machine, rebuilt the library from iPhoto and run through the rebuild thumbnails function with no success. The files are there, I just get a dotted outline instead of the thumbnails. Does anyone have any other ideas on how to restore the thumbnails?

Try the following:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

VI on LabVIEW real-time is loading and running a DLL which has been deleted from the machine

OK, this is a weird one (at least, to me :-) )
I have a small real-time demo application VI that I am writing, using some new VIs I just created. My new VIs are wrapper functions for a DLL, using Call Library Function Nodes.
In the process of debugging, I decided to delete the DLL and run without it, to confirm that I am actually loading and using the DLL (since it seemed to have stopped doing something it had successfully done just a little while earlier).
The VIs that use that DLL still run, and at least some of them actually do what they are supposed to do. But the DLL does not exist on the real time machine! Not only did I delete it, reboot the machine, and check that it was gone, but through my ftp program I searched the whole hard drive for that DLL and did not find it (the search succeeded in finding a different DLL which did exist on the system, so the search-via-ftp is working).
How could this happen? What am I missing? Could this somehow be the result of a corrupted VI or is there some more logical explanation for the phenomenon?
Thank you.
Batya

Nathan is right at least for the Phrlap ETS based RT systems. For VxWorks you have to (or maybe used to have) to download the shared library to the controller before you could deploy an executable that makes use of them. For Pharlap ETS systems if you deploy a VI library dynamically to a machine it will download everything including shared libraries to the the RT target memory and run it from there. Only if you create an executabel and "install" it to the target and run it from there will it use whatever VIs are in the executable and also use the shared libraries that have been installed onto that system (at least for Pharlap ETS RT targets. As mentioned before for VxWorks targets, the deploy process even for executable installation did for some reasons not take care about moving the according *.out library to the target together with the rtexe).
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

If one buys pages , can i download it and run it on my desktop AND my laptop or do I have to buy it twice? its only me using one machine at any one time. (Have recently purchased a second hand iMac and secondhand Mac book pro 17")

If one buys pages , can i download it and run it on my desktop AND my laptop or do I have to buy it twice? its only me using one machine at any one time. (Have recently purchased a second hand iMac and secondhand Mac book pro 17")

I have a couple or dozen or so excel spread shheets that I use origionally created in M/s Excel v.5.0 ( yup some time ago although have run and updated them on office 2007 perfectly etc. AND numerous word files that I refer to. I have also run these files using Open Office on a small 13" mac Book Pro. successfully.
I have now decided to change my personal use computers > macs.
Ok, so in summary then i think you kind guys are saying:
(1) That if i buy Pages & Numbers or even iworks which is Apple's suite of such programs i believe, then I can download and Run these apps /programs on each my personal mac computers whether they be my second hand Imac or second hand 17" mac book pro. ( basically i have purchased these so that I am converting to the "Apple Side" and can use the Imac desktop while at home and Mac book pro when out and about) , under the one purchase and one licence.
(2) The decision as to whether to Buy M/s Office for Mac v Pages & Numbers or the iworks suite is that if I have lots of MACROs in my existing files written in M/soft that it would be better to go for M/s Office for Mac. I understand that Macros are the automated thingys ?? I have formulae obviously inthe fairly simple spread sheets but not aware of any macros. So I guess that means ~ I could purchase either product by the sounds of it. yes? Are there any other obvious things i need to consider?
Other INFO:
Also, I have snow leopard on one system and Maveric ( pretty impresive!) on the other. i am slightly reluctant to upgrade the snow leopard o/s as I would have to upgrade the paralles software and probably Windows software as well in order to run an old Kitchen, drawing program that I use occaisionally. I know that one should be able to partition / and Boot camp but I really don't want to do that. I feel at this stage its not worth payingtoi up grade all these bits of software for something I rarely use. But I am open to anyones comments / views.
Thanks.

Machine statistics paging and run queue

Similar Messages

Maybe you are looking for