MachineInformation stopped working/ Laptop very slow

Hello,
I tried out the things that I found for this Problem, but it still doesn't work. When I boot my Thinkpad Edge E145 I always get a message that MachineInformation doesn't work. In general the Laptop is very, very slow and a lot of programms stop working sometimes. What can I do?

You can download a free copy of Windows 7, 8, 10  from Microsoft's site and run Windows repair.

Similar Messages

  • HP Deskjet D2400 Printer series is working, but very slow

    Problem - HP Deskjet D2400 Printer series is working,  but very slow.  Pause 5-10min before the begin of print and between the sheets   OS-WIN XP SP4

    Hi there bozhk,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Charger randomly stops working, laptop randomly shuts off

    5 months after I had this brand new laptop it crashed on me.  I wasn't able to retrieve anything and they ended up not knowing what went wrong and just reformatted my computer for me and gave it back.
    About a year later I'm having other issues.  The charger issue has been going on for a while now.  It will randomly just stop working.  It's not the battery because I plug in someone else's charger and it works just fine.  The little charging light will suddenly go off on mine and it will no longer charge - or sometimes when I plug it in to charge, it just does not light up and work.  I usually play around with it - unplug the charger from the outlet, unplut it from the adapter, take off the adapter, etc. wait around, etc. until it will finally work again.  I don't understand why it does that though.  There is no one thing that gets it to work again, it's just luck or whenever it feels like turning back on. (right now it is off and does not want to work)
    My other issue is that my laptop starting a month ago has suddenly started to shut down at random moments.  It never does that when it's just sitting in front of me.  It happens when I pick it up and then the hard drive does that little 'click' thing and then boom my screen is black.  It doesn't happen often.  There are plenty of other times I pick it up and it clicks and everything is fine.  It's not even a huge movement with my laptop.  The times when it shuts off were triggered by SMALL normal motions.  I'm simply lifting it up to move it somewhere else.  It's SOOOOO irritating.
    The two issues might possibly be related.  I have found that when the laptop just shuts off like that and it has been plugged in, the charger will all of a sudden stop working along with it!  Even if the laptop is shut off, the charger should still keep charging right?  But instead, the light for it also goes off and then I unplug and plug it back in and it doesn't go back on.
    I cannot say how annoying this is.  I thought Apple was supposed to be a really reliable brand but I've had so many issues with it.
    I will be going to the Apple store soon, but has anyone else experienced these problems??  And if so, I'd like to know what Apple did for you.
    Thanks!

    Dear Customer,
    Welcome and Thank you for posting your query on HP Support Forum
    It looks like you are facing difficulties with the Touchpad of your Notebook
    We will surely assist you with this
    Steps to drain the Static charge and loading default BIOS settings to resolve the issue
    Step 01. Turn OFF the Notebook
    Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
    Step 03. Press and Hold the Power Button of the Notebook for a full minute
    Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
    Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
    Step 06. Once you get to the BIOS, Please press F5 Key to load setup defaults for the BIOS
    Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
    Step 08. Now please wait till the Unit loads the Windows Operating system
    Now please re-install the touchpad drivers from HP Website in order to resolve the issue
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • Why do i have two identical internal hard rive in my MAC? It makes my laptop very slow

    My Mac book Pro is very slow since a few weeks. I decided to investigate. When i look in Disk Utility, i see two internal hard drive! The first one is almost full (18 Mo free on 800 Go). The second one is half full (this one is the one i see when i click on About this Mac, 400 Go free on 800 Go). I guess the first one is the one that make my computer so slow. Does anybody knows how this can happen ? What can i do for it ? It seems like the second one is a part of the first one.
    Thanks !

    OS X 10.10 Yosemite
    If you see 2 Macintosh HDs   when you check  Disk Utility, that is normal on OS X 10.10.Yosemite.
    It is the Core Storage and Volume Manager technology in action.
    There is no Knowledge Base Article from Apple  about this yet.

  • Firefox continually stops responding, is very slow and I can't load games on it

    I have Vista Home Premium 32 Bit OS. Normally, Firefox is very stable and totally reliable, but it has been "stalling" more and more often: not responding for a period and then starting again. Now, though, it only lasts a few seconds before it stalls again. It is very slow. I can't load games (from Pogo.com).
    I have cleared my temporary internet files, updated Java and restarted my computer several times. Nothing helps. What can I do.
    When I restart, it has been taking over 10 minutes before my computer is ready to use again.
    Maequeen

    Im glad Im not the only one. I have tried everything I can think of, and I dont seem to have any infections of any kind, but Mozilla is molassas in January slow. So slow that using my mouse and typing is ridiculous. I just cant see what I am typing it takes so long to post its likes a paragraph behind my writing. Im on IE (which I loathe) to type this.
    Whats up Firefox? I love you......why are you doing this to me?
    Im on Vista, I checked all my addons and I uninstalled the only one that said it was incompatible, (HP web something or other) and its no better at all. ANY help at all would be great.

  • Can't I stop the HOG Flash from Firefox? I use FlashBlock but a constant fight. Often both cores maxed at 100%,laptop very slow until I kill Flash in Tsk Mangr

    Flash is the problem. It often maxes both cores of my dual core processor and brings processing virtually to a halt.
    Originally, I killed flash in Task Manager whenever i heard my fan come on and also noticed slow system response. This was very distracting and took a lot of time.
    Then I installed FlashBlock, but it doesn't stop Flash unless you tell it for each and every website.
    When reading news, and opening a link, I will hear the fan start, so i click the block button/icon in Firefox to block the site from using flash. Some sites don't launch with the FlashBlock icon. I have to use the manual kill option for them. This extremely frustrating. I understand why Steve Jobs hated Flash.
    I don't like Apple's money-sucking wallet-leach behavior, so I use WinTel and live with the frustrations of which this is the biggest. HTML5 supposedly is the solution, but site builders use flash.
    FireFox needs a flash control switch built in the browser to give control of Flash - block/ask, etc. functionality.

    By the way, Firefox does have a Click-to-Play feature you can use for Flash. That will delay Flash from starting on a page until you approve it. However, the approval is per site, I believe, so you may need an add-on to control it per page.
    To set "Ask to Activate", open the Add-ons page using either:
    * Ctrl+Shift+a
    * orange Firefox button (or Tools menu) > Add-ons
    In the left column, click Plugins. Look for "Shockwave Flash" and change "Always Activate" to "Ask to Activate".
    When you visit a site that wants to use the Flash, you should see a notification icon in the address bar and one of the following: a link in a black rectangle in the page or an infobar sliding down between the toolbar area and the page.
    Not a solution, but hopefully will help a bit.

  • Server working but very SLOW on MacMini

    I've installed 10.5 several times now in the 3 different modes just to familiarize myself with it before i setup everything else. Now after the initial install and config as an advanced standalone server i did a software update and then added the services I need for the moment:
    afp
    ftp
    mysql
    web
    and all works fine, the webserver with php5 and mysql (including phpmyadmin), ssh, no problems. However, all the connections to the server via the Server Admin or Workgroup Manager take a very long time. Launching Server Admin takes about 45 sec until the main window is displayed, then i get the spinning beach ball for around a minute, authenticating to my server so i can change setting will take up to several minutes after i click 'Connect' (with the beach ball spinning again). A refresh or clicking save after having changed options of any of the services or server also take close to or more than a minute.
    I've tried using the FQDN (mydomain.net) or the myserver.local or the IP adress of the server but there is no difference in speed.
    Login into the server via FTP and Navicat (mysql admin tool) also takes a very long time, around a minute or more.
    Login in over SSH from another machine on my network (by using the FQDN) is very fast however, only takes a couple of seconds to display the password prompt and login.
    Is it just the MacMini which is underpowered, i couldn't detect any processing overload on this Core Duo 1.83 with 2 GB of RAM (and nothing else running).
    This slowness was the same whether i installed a 'Standard' 'Workgroup' or 'Advanced Server'. In all cases the web-server and mysql respond very fast.
    Thanks for any help

    I'm running my leopard test server on a 1.6 mini with 2gb of ram and it's not exactly a speed machine but I wouldn't call it slow either, certainly not what your describing. I'm not running mysql or FTP though. I'm primarily using it for podcast producer but I've got all this running in my various tests:
    AFP
    iCal
    iChat
    Mail
    NetBoot
    NFS
    OD
    PP
    Quicktime Streaming
    SMB
    Web
    Xgrid
    I'm not really sure what to tell you. I have SQL running on a windows box and it slows down windows significantly. Did you play with it at all before turning mysql?

  • Macbook Pro 10.6.8 constantly drops my wi-fi network and joins Linksys which works but very slow

    My Macbook Pro constantly drops my network and joins Linksys. It connects to the Internet but is painfully slow. Choosing my network again works for a while than goes back to Linksys. Any sugestions?

    Try going to system preferences/network/advanced, airport tab, in the prefered networks pane highlight and drag your net work to the top of the list. See if it then chooses your network as prefered, hope this helps.

  • Error "Licensing has stopped working" occuring very frequently on Win XP SP3 with Adobe Pro 9.5.x

    Hi All,
    Do we have any permanent fix to address the License error? Since the user are observing this issue very frequently. Every time Adobe License Recovery tool http://www.adobe.com/support/contact/licensing.html is being executed to recover the license. Checked on many adobe forums could not find any resolution for recurring issue.
    Any suggestions on this issue?
    Thanks in Advance.
    Rajesh

    I have been having the licensing issue with Windows 8.  I have run the licensing repair tool every few weeks.  It never "sticks".  Acrobat will work fine for a few weeks, maybe a month, then the error comes back.  Does anyone know of a permament fix. Thanks.

  • Safari barely works. VERY SLOW.

    Three days ago, March 27, evening, Pacific Daylight Time, I tried to download something from iTunes from my Mac.  I had always used my iPad before.  It downloaded it, then when I went to play it, it said the Mac was not authorized and window came up asking for my password.  I entered and it said "Already authorized". Over and over, no matter what I did. I fiddled around a bit, nothing worked. I looked in help forums, nothing worked.
    Finally I gave up. The music I had downloaded was accessible from my iPad so I just moved on and decided never to use the Mac to download from iTunes again.  I have just the two, iPad and Mac.
    Next morning, Friday, when I turned the Mac on, it sat there for about ten minutes and then asked for my password (not my usual way of getting on. I am the sole user).  I thought it must be connected to my previous night's adventure with iTunes.
    The system was barely working.  Restarted two or three times.  After that, I could get to Gmail with Safari.
    But Safari was barely functional. I thought it was my ISP, waited a day or two.
    But other people in the house who do not have Macs are finding no trouble with the internet.
    Still, I cannot use Safari.  It is so slow as to be useless.  I've tried deleting cookies and clearing cache.  Does nothing. 
    The sites I am trying to get to are large and well known, like the New York Times, Wall Street Journal and Reuters.
    Oddly enough, I can access still Gmail and Blogger no problem.  But the news sites, forget it.
    Because it started at the same time as the iTune glitch and the strange behaviour of the Mac the next morning, I wonder if it is somehow connected.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My laptop very slow on windows 7

    I recently have installed win 7 on my laptop thikpad 8392 cto.
    I have 2gb memory and I'm waiting sometimes 10-15 second until the page open
    what can I do to increase the speed?
    because now I don't see another option except to back to WIN XP

    roman12345 wrote:
    u say every computer with 2GB ram and WIN7 work slowly?
    and no solution to increase the speed?
    As I said, 2GB is the bare minimum for running W7 in my experience.
    Your machine is capable of handling 8GB RAM. 4GB (2x2) should be plenty, and can be obtained for $40 or thereabouts.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Safari not working right/very slow/freezing

    Is anybody else having the same issue with Safari this morning?

    Even though you don't say what version of Safari you have (and it can't be 4.0.4 as you are only on 10.5.3), the following should work:
    (First, if yours is an Intel Mac, check that Safari is not running in Rosetta, which is enough to slow it to a crawl. If you are running Snow Leopard, run Safari in 32 bit not 64 bit.)
    Do you have enough RAM? Less than 1GB can cause slowness. Is your hard drive too full? Less than 15%, or 15GB, of free space can also cause slowness.
    Adding DNS codes to your Network Settings, should gives good results in terms of speed-up as well as added security:
    Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
    208.67.222.222
    208.67.220.220
    (You can also enter them if you click on Advanced and then DNS)
    (An explanation of why that is both safe and a good idea can be read here: http://www.labnol.org/internet/tools/opendsn-what-is-opendns-why-required-2/2587 /
    Open DNS also provides an anti-phishing feature: http://www.opendns.com/solutions/homenetwork/anti-phishing/ )
    Wikipedia also has an interesting article about Open DNS:
    http://en.wikipedia.org/wiki/OpenDNS
    Whilst in System Preferences/Network you should also turn off 'IPv6' in your preference pane, as otherwise you may not get the full speed benefit (the DNS resolver will default to making SRV queries). If you want to know what IPv6 is:
    This is Apple's guidance on iPv6:
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8708.html
    Click on Apply Now and close the window.
    Restart Safari, and repair permissions.
    If that didn't do it, then try this as well:
    Empty Safari's cache (from the Safari menu), then close Safari.
    Go to Home/Library/Safari and delete the following files:
    form values
    download.plist
    Then go to Home/Library/Preferences and delete
    com.apple.Safari.plist
    Repair permissions (in Disk Utility).
    Start up Safari again, and things should have improved.

  • Latest version of skype version works but VERY SLOW

    I have a capable mid range gaming notebook that runs any and all sorts of applications with no lag. Until... I start up skype. When skype is running it freezes every 10 seconds and it makes my other programs slower. The other programs run well when skype is closed. So I assume the issue is with the latest version of skype. I used to have this problem with skype half a year ago so what i did back then was disable automatic updates then download an older version that worked. But now that skype wont accept the use of older versions I need another solution to fix the horrible lag.

    Cannot load websites after updating Firefox
    https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can#w_cannot-load-websites-after-updating-firefox
    If the problem persists check these out:
    Error loading web sites
    https://support.mozilla.com/en-US/kb/Error%20loading%20web%20sites
    Server not found
    https://support.mozilla.com/en-US/kb/Server%20not%20found
    Check and tell if its working.

  • Movie not working properly-very slow

    Hi,
    I just opened up a file with a movie in it. If I click to play it, the app stops responding for quite awhile, during which maybe one or two frames will play. I'm not sure if this has anything to do with my recent installation of iWork 06, but I thought I should mention it.
    Has anyone had this problem, and do you have any hints?
    Anneliese

    You didn't give us a url to your website. Are you using AS2 or AS3? If you're seeing alpha characters instead of the webding characters that you expect, then you don't actually have the webdings font embedded or used properly.
    Can you show the code that you are using, or the settings in the Properties window, for the embedded font(s)?

  • Screen Sharing Stopped Working Due to Slow Network

    I have been sharing the screen of a friend with an iMac. I have an MBP and both our computers have all updates. After I updated her iMac I now longer can share her screen. She can still share mine and I can share my screen with others and I can share other users screens. She is the only one whose screen I can't share.
    This started after a number of updates were installed on her iMac. The Connection Doctor says her iMac does not have the capability to share because of slow network connection. I tested the connection and it does not appear to be slow. I have tried a cable yet because it is pretty far from the modem and I need to get a longer cable.
    I changed all settings on both computers to the recommendations I read here. Quicktime 1.5 MBps, ichat 500 kb bandwidth, set security to specific and allow ichat. Still cannot share screen of iMac and "slow network" given as reason.

    Hi,
    If the Quicktiem setting had to be changed iChat will need restarting to "See" that new Speed.
    If that has been done you could try deleting com.apple.ichat.plist where this info is held.
    WARNING this loses all the other settings made in the Preferences (Fonts, Colours, Balloon or text background colour, Saved Transcripts, Menu Bar Icon, Some iChat 4 specific things - Remember Open Chats Across launch, Name spotting.) and Saved Status Messages.
    10:48 PM Saturday; July 18, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Maybe you are looking for

  • Getting Custom code error while deploying the report but in local(BI studio) when i preview its working,

    Hi, I Haven't used Vb.net, as I work on C#, But in SSRS it supports only VB.net code as custom coding, so i coded in c# and converted to VB.net from online converter. The code i got from online converter is working fine in local i.e when i preview in

  • How to use discrete PID in FPGA module?

    Hi, I want to implementa PID controller for a Two tank set up, where my aim is to control the level in the tank.so my process variable will be in centimeters and my set point will also be in centimeters.The control output calculated will be milli amp

  • "SET FLAG"  at Material ID in product Master

    Dear Frnds,       As per our scenario we have spare parts creating in commpr01 and when a person search's for a product we want to differntiate the Spare Part with Flag .               For example , when you have searched for product in crm then 10 p

  • SD-EDI Inbound ORDERS05

    Hi people! I want to receive sales orders from customers by EDI. When receiving the IDOC, the customer sent me his EDI partner number. (Operational point) How to translate the 13 digit number to my SAP customer number? I have WE20 actualized, the EDP

  • Prerequisites for ADF?

    Hi, prerequisites for ADF?