Macintosh Color Classic startup issues

I recently came across an old Color Classic. When I try to start it up it makes the normal boot sound, display comes to life, and you can hear the hard drive spin up for about 3 seconds, before it goes back silent (except for the fan noise). From there it just flashes the question mark. With an external CD-Rom plugged in I am able to boot an old recovery cd that I had made for my powerbook 520c with system 7.6.1. It gets to the desktop, but never mounts the hard drive. Additionally, the apple hard drive setup software says it can't find and SCSI devices. I have various other drive software on the recovery CD that I will try, but does anyone have any other ideas?
Oh, and I have no idea what size the hard drive is, just that it is a Color Classic with 10mb of ram.

Using the program SCSI Director while booted up off of a CD was able to at least see the hard drive. Unfortunately it is reporting a "sense key 04 hardware error" every time it attempt to mount, format, test, or repair the disk. So today I have spent the better part of 5 hours driving around Tucson trying to find an old 50 pin SCSI hard drive (or a machine to donate one), with no success. (tried goodwills, thrift stores, computer shops, etc).
So at this point I'm either going to have to make a trip to Phoenix to pick one up, or attempt to repair mine. On the bottom board of the hard drive near the power connector there are two small black resistor or capacitor looking things. On one of them it appears that the metal pin leading into it is corroded/rusted. I may try my chances at desoldering that one, swinging by RadioShack, and picking up an identical one. It just seems like a long shot though. Does anyone have any experience in doing this, or any other ideas?
Many Thanks,
Justin

Similar Messages

Macintosh Color Classic Compact Flash Card

Hi All,
So I purchased 6 Macintosh Color Classic's for $15 each with Apple IIe cards and Apple Ethernet cards. They are in excellent condition. They came with 60mb HDs. I would like to upgrade the HD with something bigger. What I would like to get is a SCSI to IDE to Compact Card convertor. I have seen some SCSI to IDE convertors. Ideally I would pop in a Compact Flash Card and partition it. What would really be cool is to remove the internal HD and replace it with a Compact Flash Reader and add a slot in the front so I can swap them out and boot.
Do any of you know of a product that will work and have actually used? I know there are some, but I want to be certain it will work with the Classic.
In the meantime; Would a SCSI 2 Seagate Cheetah drive work with a 50 pin adaptor? I have 7.1 but will go to 7.6.1 as soon as I have a bigger drive.
Thanks,
WillGonz

Are you sure you really want to spend a hundred to two hundred dollars on a $15 computer?
http://www.google.ca/search?client=safari&rls=en&q=scsito+ideconverter&ie=UTF-8&oe=UTF-8&redir_esc=&ei=zQJyTNvHKYqbnwfhi63ACA
The big problem is that the hard drive caddy and adaptor that attaches to the back of the hard drive are not designed with any wiggle room for something in between so you would have to fashion something else for a plate. Then the issue might become whether or not everything will still fit in the slot or line up with the connectors....
I've adapted CF cards to work in Aspire One laptops and unless you pop for the fast $$$ cards these things are dogs so again not sure if that is such a great solution.
RE the adapted SCSI 2 drive same problem as above with the hard drive caddy and the strip that attaches the hard drive to the CC. Personally I would say you are out of luck on this as well.
Kevin

Macintosh Color classic

I use pc, I might buy a color classic soon, do I need a macintosh formated floppy drive to put files onto there for the mac to work? And will it work with my PC?

Macs with a 1.4MB-capable floppy drive can read and write IBM-formatted floppies as well as Mac-formatted floppies.
The older 800K format is implemented with a variable-speed motor, so only the internal drive in a platinum/beige Macintosh can read and write those diskettes.
Remember to unpack stuffed files ONLY on the Mac, as the PC file format discards the resource fork of unpacked Mac files, destroying them.

I need System 7 for use on my Color Classic?

Hello Apple Community -
I've fired up my old Macintosh Color Classic and it has the hard drive but has been completely wiped down to the bones. I need to find the ENTIRE collection of System 7 image files to stick on floppies that my Color Classic can directly boot into.
I've seen a whole bunch, but the only issue is they have to be mounted while already inside the operating system. I need image files I can somehow put onto a floppy and make it so my Color Classic will directly boot into them.
Cheers,
~Nick

Hi Nick,
>After I replace the hard drive with another one, can I boot up using the Network Access Disk and from there format the drive and install 7.5.3?
It depends on whether the SCSI hard drive has an appropriate basic formatting or not. If yes, you should be able to boot from the Network Access floppy and initialise the hard disk via the Erase Disk command under the Special menu. If not, you would need a disk tools floppy with a suitable formatting utility.
Apple HD SC Setup 7.3.5 is a formatting utility for hard drives with an Apple logo (that have not been reformatted by a third-party application). For other hard drives, a third-party program (such as Lido 7.5.6) would be needed.
http://www.info.apple.com/support/oldersoftwarelist.html#util
It is possible to modify a Network Access floppy to hold a small utility like Apple HD SC Setup 7.3.5. However, this would normally require access to a fully working old (approx. 1991-1997) Macintosh computer.
>Is there a Windows program I can use to properly put these on the floppies as I don't have access to an actual Classic OS?
You would need a Windows program (something like TransMac) that can handle Mac floppies (1.44 MB) on a PC. Download all nineteen files in the MacBinary (.bin) format. Keep the files as they are. Do not attempt to decode or decompress anything on the PC. Copy the files one at a time onto Mac-(re)formatted 1.44 MB HD diskettes. Then move the floppies to the Color Classic (once it has a temporary operating system).
On the Color Classic, place the nineteen files in a common folder. Now, use StuffIt Expander to decode the MacBinary (.bin). Do this by dragging each transferred file onto the StuffIt Expander icon, or by opening each file from inside the StuffIt Expander utility. If you do not have a proper version of StuffIt Expander for the old Mac, you may want to try this:
Download the MACDISK.EXE file from the following web page onto a PC (capable of running a DOS program).
http://rrzs42.uni-regensburg.de/Macintosh/files/macftp.html
Next, prepare an empty PC-formatted 1.44 MB HD floppy via the FORMAT A: command under DOS or the "full" formatting option under Windows. Do this even if the floppy had been formatted earlier.
Run the MACDISK.EXE (DOS) program on the PC. Follow the instructions on screen. The result will be a Mac-formatted (sic!) floppy complete with a ready-to-use StuffIt Expander 4.0.1 installer for Macintosh.
Jan

Mac Color Classic Display

Hi, I have a macintosh color classic having a display issue. If I leave the system off, and the main switch on the back in the off position for a few hours and start it up it runs perfect, and can do so for well over 20 hours strait.
However, if the main switch has been on for more than a minute or so without starting up I have issues. When I finally do hit the power button on the keyboard the display is overlapping itself in the middle and almost twice as bright as the maximum allows.
I already tried opening the case and dusting out the inside with a can of compressed air. Replaced PRAM battery. Reset PRAM, all that normal stuff.
Any suggestions or tips would be nice, especially since the computer is in otherwise perfect operating condition!

I'm no expert on these but I had something similar on a Classic. It seemed to be a fault with the hard drive, I think it stalled and took current forcing the PSU into safe mode, as in the computer didn't start up. I replaced the HD and all was well.
Sometimes the computer would start and sometimes not, most odd.
I wonder as your screen is folding over, the deflection circuit has a fault which takes too much current and causes the problem. Only a guess based on what I have experienced.

End of the road for my Color Classic???

Greetings. Lifelong Mac user here who, in the wake of Jobs’ passing, retrieved my Color Classic from the attic, thinking it would surely boot right up. It worked as recently as maybe 4-5 years ago, but all attempts over the past month to successfully boot it up have been in vain. After one purchase from Radio Shack and three from eBay, I’m 99 percent done throwing any more money at it. But I’d like to see if any of you could maybe help me out before I give up the ghost. I don’t have long, since I’ll need to return the internal HD I just bought off eBay soon if I want a refund. Here’s the rundown:
** Initially, it would boot up without the startup chime, show a grey screen for a minute or two (no icons at all), then give the eight-tone chimes of death.
** Buying a new PRAM battery led to it giving the startup chime and showing the smiling Mac, but that would give way to the flashing question mark over the floppy icon. I tried resetting PRAM, which did lead to the three successive startup chimes, but still got the question mark afterward.
** Next thing I did was buy a complete set of 7.1 discs off eBay. Using either the Disk Tools disc or the Install Me First disc, I would get the startup chime and smiling Mac, but then I couldn’t get past this message: “This startup disk will not work with this Macintosh. Use the latest installer to update this disk for this model.” For some reason, the mouse wouldn’t work when doing this, so I’d have to power off with the main switch and then eject the floppy with a paper clip. I would later learn that these discs apparently wouldn’t work on the CC because of a missing System Enabler.
** Next step: buying 7.6 Disk Tools discs off eBay. This time, the startup chime and happy Mac gave way to a sad Mac icon, a "0000000F / 00000066" error message and four-tone chimes of death. That led me to believe my factory HD was bad, sooooo …
** I bought an internal HD off eBay with 7.5 already installed on it. I had high hopes that this would finally do the trick. The heavens would open up and I would see the desktop. But ... after the swap, I was greeted once again with the flashing question mark. I disconnected and reattached the data and power cables to the HD three times, but to no avail. I tried booting off the 7.6 Disk Tools with this new HD, but got the sad Mac / "0000000F / 00000066" sequence once more. I tried booting off the 7.6 Disk Tools with no HD attached and got the same thing. This was the most depressing night of all.
** Today, with the new HD installed, I tried booting off of old 7.0.1 and 7.1 startup floppies my dad made back in the day -- and one or both of them actually progresses past the smiling Mac to the "Welcome to Macintosh" screen. But then, the "use the latest installer" screen takes over.
So this is where things stand. I'm holding out hope that I can having a working CC without spending any more money, but I'm not optimistic. Tonight I might trying washing the logic board in the dishwasher, as well as booting with the logic board disconnected and then pushing it in shortly after the startup chime (which I had tried with the factory HD without success).
Any thoughts? Ideas? Or should I call it a day, put it back on the side mantle in my living room, and go the Macquarium (or MacAntFarm) route down the road? Thanks in advance for your help!

The Color Classic is pretty straight forward to work on because the motherboard is just a matter of pulling it out.
But I don't think it's a bad motherboard so that is the good news. Sounds like the original hard drive died but before you toss it try seeing if it is just a matter of the heads being stuck. Take it in hand and gently swish it back and forth a few times to see if it that will unstick the heads. If you had a clean room I would say open the drive and gently turn the platters than zip it back up and see if it will work.
The "new' hard drive you bought sounds like it is pooched as those clicking sounds are usually an indication of a bad drive so return it ASAP for a working one or a refund. But just in case if you look at your old hard drive does it have terminators on it, they will look like two long black strips with multiple prongs attaching them to the motherboard of the hard drive. Now look at the new one, does it have any or a place for them? Though my memory is foggy on SCSI drives but that 700 might have a jumper instead but that could be wrong.
In terms of the OS, you can run System 8 on it. But you must buy the Apple release version for all Macs which comes with a floppy disk to boot your CC as well as a CD with the system SW on it. The CD is white but you will need a SCSI CD drive to install the sw. The error messages tell me that those disks are the wrong ones and not something wrong with your CC.
Now if you were into experimenting..... the following motherboards from other compact Macs will work in your CC.
The motherboard from the LC 525 is a straight swap in and even the ports on the board mate up with the holes on the rear cover. The LC 550 as well, which was actually the motherboard that the CC II used.
The motherboard from the LC 575 will also work and that adds a 68040 cpu into the mix plus the upgrade to 72 pin simms which allows you to add up to 128mb of ram with a modification to the case of the CC. The two other boards I mentioned also take 72 pin simms so you can bump up your CC from 10mb to 32mb.
I wrote a short page on my experiments here, http://www.kevinomura.com/macs/colorclassic/index.html .
In any event I think it's just your hard drive that is the problem since your video sounds good, don't toss that CC as there are still collectors out there looking for them.
On other thought, since the hard drive is on a caddy with a zif socket it's possible that some of the pins have a bit of corrosion on them. Check the one's on the hard drive side and see if they look clean, if not clean them. on the computer side that will be tougher since it's deep in the case but a few insertions of the drive might be enough to knock some of the corrosion off and make a better contact.

How to copy files from a color classic w/broken floppy drive to an i-book ?

How to copy files from a color classic w/broken floppy drive to an i-book ?
I have a Coplor Classic with a system 7.
There is no ethernet on color classic. The floppy drive is dead.
I need some important files I have on the color classic...
How do I connetct them to transfer files?...

The easiest way, as AppleIIFreak has suggested, is probably to find another older Macintosh computer (with the round MiniDIN printer port) to be used as an intermediary. You could then connect the two machines by means of LocalTalk cabling, or just a plain Mac serial printer cable between the printer ports, and then set up file sharing. From that other Mac, you should be able to forward the files via Ethernet, diskettes (if you have an external USB floppy drive for the iBook) or email (Internet).
If a second old Mac is not available, you may want to try something else. It would not be unusual for a Color Classic to have ClarisWorks already (obviously, one cannot expect anything new to become installed). If so, that program suite would contain a communications part. This means that you could connect an external serial modem, and send the files over the phone lines (or locally, modem-to-modem, in principle as in KB article # 22229; sometimes a very simple home-built line simulator may have to be added) to any other computer using a terminal emulation application with file transfer capabilities. It would also be possible to connect the modem port directly to the serial port of a PC, through a combination of a Mac modem cable (MiniDIN-8M to DB-25M) and a standard PC null-modem cable (DB-25F to DB-9F).
Jan

Macintosh Color Display

I just bought a used Macintosh Color Display from a local thrift store. I have brought it home only to find that the adjustment holes on the back seem to have no effect when a tool is inserted & I attempt to adjust the screen's geometry. For my tools I'm using a $15 Kronus toolkit I bought from our local Radio Shack store. The monitor is currently hooked up to a Mac Performa 405 with Mac OS 7.5.5 & maxed out RAM & VRAM. Through trial & error I eventually figured out that I needed to enable the LC Monitors extension for the Macintosh Color Display to show up as a valid choice in ColorSync's list dialog box that opens when selecting the monitor model. I have also downloaded a manual for it from Apple's Support website too. According to the manual I'll need to take apart the monitor to get at the geometry adjustment controls. I also need to find the Apple Display Utility download in the event I should need to attempt to calibrate it. Is the only feasible way to adjust the monitor's geometry by opening it up?

Update: I have taken off the case of the monitor yet again to perform the adjustments. The problem is simple. I had adjusted it previously but the setting won't stick & now the left & right edges of the image look distorted. The odd thing is they looked fine at the time when I did the adjusting. I also had the fuse tested at Radio Shack & they said it was still good. I have also discovered something quite disturbing while the monitor was open. There is a capacitor inside with a y shaped marking on top of it rated at 2200uF. I also recently read a Wikipedia article which suggests that such capacitors with a y shaped marking on top & rated over 480uF may need to be replaced. It wouldn't surprise me in the least considering the monitor was made in November 1993 according to the sticker on the bottom edge at the back of it. I also had a recent experience with Apple's Tech Support over the phone via their 1-800-SOS-APPL number. I told them I suspected bad capacitor/s may be the cause of my issue too. I was also sent a survey by email shortly afterward. When I called their Tech Support they said the monitor was purchased from Apple in 2003 but I bought in sometime during the first quarter of 2006 from the local MVAC Thrift and More store. Will the repair be covered as a manufacturer's defect too despite the age of the monitor? Should I take the monitor to my local Apple Authorized Service Provider? More importantly will I have to pay for the repair?

No sound from Color Classic

Hiya. I've got a Color Classic, very used. Sys 7.1, 6 megs RAM, 80 meg HD (remember when that seemed huge?)
It has no sound. None. At first, it had a muted sound, but now even that's gone. No sound if I plug in an external speaker or headphones either. I've opened it up and checked the connections on the speaker, and it looks good all the way thru.
I suspect it's the main board (with the external plugs and all), so I suppose I'd have to replace that if I manage to come across another CC (or maybe just exchange one for the other), but I'd like to know if there are any other possibilities, some simple thing that could be out of whack that I somehow might have missed.
Thanks

Brett
Given that you haven't missed the front-panel sound and brightness controls of the CC (the harbinger of things to come on some of the later AIOs), you may have analogue board problems. Although on-board capacitors had gone through a couple of generations by the time of the CC, even the newer types are 14-odd years old now. The audio of AIO 68k Macs is highly sensitive to capacitor degeneration, for which the sole remedy is replacement of the capacitors. Replacement CC analogue boards are getting scarce, so repair is likely to be quicker. Washing the logic board can often make a considerable improvement to capacitor-induced problems on that board, but the logic board is where the better capacitors fail less often.
Colour Classics can be upgraded in various ways. The first, when one is running, is to maximize RAM by replacing the 2 x 1MB SIMMs with 2 x 4MB. (There is 4MB of soldered-in RAM.) The CC will, however 'see' only 10MB of the resulting 12MB. VRAM can be doubled by adding a 256kB SIMM, and a 68882 maths coprocessor (FPU) can be added, if you do enough number-crunching to need one. In this state you could put an Apple IIe-emulator card in the LC PDS slot. If not one of those, a 10Base-T Ethernet NIC in that slot. The emulator cards have gone from USD10 to USD40 on eBay in the last couple of years. The Apple II ware needs a 10MB partition of its own, on say, a larger HDD of about 500MB as another upgrade.
The second kind of upgrade is to replace the logic board. There is already a forum devoted to Mystic, Takky and other hacks of CCs. If you go this way you will not be able to use the Apple IIe card.
Apple IIe; 15 x 68K; 7 x PPC; 5 x G3 System 6.0.8 to OS 10.4.x

Classic startup problems

When I launch a classic app, the classic startup is very slow (5 minutes), and I get a window that says that it it trying to connect to a server, which I cancel out of (twice), and then when classic finally does launch, it usually starts up AppleWorks automatically, which gives me the "I/O Error" box about 6-8 times, which I have to keep hitting enter for. Once all that is over, Classic works fine, but I have noticed that if it is on too long, I can get crashes.

Thanks, that helped. I got rid of the Apple Menu items, Control strip items, and Control Panels, and just went with the OS9 base extensions. Now it loads very fast. Also, I trashed the AppleWorks prefs in the OS9 System Folder, and it doesn't load AW anymore, and the I/O Errors stopped.

New StartUp Issue

My new MacBook Pro 17" has been having startup issues recently. After I shut down, leave, and come back, the startup issue occurs.
After pressing the power button, fans will go on, proccessing noises occur, HOWEVER, it just boots to a white/grey screen W/OUT the apple logo or round loading bar. The keyboard does not initialize either.
The only thing that I have found to 'fix' it, is just to leave it powered off for an extended period of time. It will then boot up.
I have tried many non-software related 'cures', and my compuer is completely up to date on all OsX software.
Any ideas guys??

you can try to boot to safe mode ( restart holding Shift )
- you can attempt to boot to install disc and disk utility
- you can boot to AHT ( apple hardware test ) to see what component is failing ( insert disc, restart holding D )
- chances are, this is a hardware issue though. you will probably need repairs.

Startup issue - Process 'Starting Framework'

Hi
I seem to have a startup issue with NM2004s. I get a Half Green/ Half Yellow icon in the MMC. The 01 instance is always yellow and never progresses onto green. I have a process status of 'starting framework'.
Anyone else had this issue?
Cheers
Ian

Hi Ian,
I just installed the J2E on a laptop that already has a NSP instance.I am facing the same issue on the J2E.Do you remember if you could resolve this and how?
Any hints would help.
Thank you

Using a Color Classic as a print server for modern Macs?

My fiancé and I have a 2011 MBP and a 2008 MBP respectively, both running Mountain Lion.
Our network is set up through a first-generation Time Capsule, which until recently, also had an Epson Stylus inkjet connected to it.
The Epson has passed away, and the only working printer we have is an old Apple Personal LaserWriter 320.
We still have several toner cartridges for the PLW, and it works just fine... but it only has tthe old 8-pin serial connector, and from what I understand, it's only compatible with LocalTalk.
The PLW is connected to a Mac Color Classic, which has been upgraded with an LC 575 logic board (including an ethernet communications card). It's currently running Mac OS 8.6. I'd like to set the Color Classic up as a print server until we can decide on a long-term solution, but I am unsure of how to get these systems to talk to each other over the network.
Can we get the Color Classic to host the PLW for our OSX machines?

m8,
Just like any hardwares,(vga, lan card, audio card etc) drivers for XP, Vista & Windows 2003 have specific drivers of its own. You'll need to find a driver for 3110(which include its modem) for windows 2003 server, but I doubt if you can find one. There is no work around on this!
Message Edited by android on 09-Aug-2008 01:39 PM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

My color classic needs a replacement hard drive, please help me find one

The dead drive that was removed is a Conner CP30085E 85MB 3.5in SCSI 50 PIN. Also I have OS 7.1 is there a later system that would work. Note the tools floppy disk boots perfectly.
Thanks for any info
ron

"...they had a Quantum apple drive 84 mb SCSI drive for $99. Talked to the owner and he said the older apple drives are really getting scarce."
Scarcity doesn't justify egregious price gouging. An 84 MB SCSI hard drive should not cost that much. Did you try an eBay search for a "50-pin SCSI hard drive?" I just did and found some larger drives for far less than either of the prices you got from 4drives.com. It doesn't have to be an Apple-branded drive, although that helps when some third-party drives aren't supported by Apple's disk formatting utilities. You can also check eBay for an OS 7.6.1 retail version/universal installer disk or OS 7.6 and then download the OS 7.6.1 Update. I'd want at least 16 MBs of installed memory to run OS 7.6.1, but your Color Classic is maxed out with a pair of 4 MB SIMMs plus 2 MBs of the 4 MBs of onboard RAM, for a total of 12 MBs.

Managed server startup issue!!!

hi all,
i am facing managedserver startup issue
i am start the managed server it will up take the 6 min
how to reduce the time
1)i am trying differnt ways 1)threaddump 2)GCparamets
but no usee
can u see the log and give me suugestions
below log one perticuler area it will load the application 4 min
please see the time stamps 8:31:01 to 8:35:09
please give me suggistions!!
======================================
####<Apr 11, 2010 8:31:00 PM PDT> <Info> <Deployer> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043060997> <BEA-149059> <Module eci.jar of application Agile is transitioning from STATE_PREPARED to STATE_ADMIN on server agwlcrptrn1.>
####<Apr 11, 2010 8:31:01 PM PDT> <Info> <EJB> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-010009> <EJB Deployed EJB with JNDI name com.eigner.eci.EciSession.>
####<Apr 11, 2010 8:31:01 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-000000> <Listener: end ModuleCtx[appId=Agile, modId=eci.jar, type=ejb, Target=Cluster/AgileCluster] STATE_PREPARED>STATE_ADMIN>
####<Apr 11, 2010 8:31:01 PM PDT> <Info> <Deployer> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-149060> <Module eci.jar of application Agile successfully transitioned from STATE_PREPARED to STATE_ADMIN on server agwlcrptrn1.>
####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043309172> <BEA-000000> <Relaying updated state for app, Agile to STATE_ADMIN>
####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043309173> <BEA-000000> < +++ Returning app's state : STATE_ACTIVE>
####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <

hi sandeep,
i take the thread dump 10 times at the start the server can u look into this one...
===============================
CLASSPATH=/local/mnt/agile/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/local/mnt/agile/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/local/mnt/agile/bea/jrockit_160_05/lib/tools.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/weblogic.jar:/local/mnt/agile/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/webservices.jar:/local/mnt/agile/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/local/mnt/agile/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/local/mnt/agile/agile93/agileDomain/lib/jms.jar:/local/mnt/agile/agile93/agileDomain/lib/jndi.jar:/local/mnt/agile/agile93/agileDomain/lib/tibjms.jar
PATH=/local/mnt/agile/bea/wlserver_10.3/server/bin:/local/mnt/agile/bea/modules/org.apache.ant_1.6.5/bin:/local/mnt/agile/bea/jrockit_160_05/jre/bin:/local/mnt/agile/bea/jrockit_160_05/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin
Your environment has been set.
QCHTTPHeaderIdentityAsserter.initialize
AgileAuthenticationProviderImpl.initialize
2010-04-10 20:03:14
Full thread dump Java HotSpot(TM) Server VM (10.0-b19 mixed mode):
"Thread-13" daemon prio=10 tid=0x62a8a800 nid=0x1b6 waiting on condition [0x5f7b8000..0x5f7b9130]
java.lang.Thread.State: WAITING (parking)
     at sun.misc.Unsafe.park(Native Method)
     - parking to wait for <0xf2d78078> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
     at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
     at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
     at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
     at weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
     at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
     at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
     at weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
"LDAPCache-TTLTimer" daemon prio=10 tid=0x09277000 nid=0x1b5 in Object.wait() [0x5f90b000..0x5f90bfb0]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2d7c068> (a netscape.ldap.TTLTimer)
     at netscape.ldap.TTLTimer.run(LDAPCache.java:828)
     - locked <0xf2d7c068> (a netscape.ldap.TTLTimer)
     at java.lang.Thread.run(Thread.java:619)
"LDAPConnThread-1 ldaps://qpip.qualcomm.com:389" daemon prio=10 tid=0x5f6fc000 nid=0x1b4 runnable [0x5f95c000..0x5f95d030]
java.lang.Thread.State: RUNNABLE
     at java.net.SocketInputStream.socketRead0(Native Method)
     at java.net.SocketInputStream.read(SocketInputStream.java:129)
     at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
     at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
     - locked <0xf2d820a8> (a java.io.BufferedInputStream)
     at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
     at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
     at java.lang.Thread.run(Thread.java:619)
"Thread-12" daemon prio=10 tid=0x61c2ac00 nid=0x1b3 waiting on condition [0x5f9ad000..0x5f9adeb0]
java.lang.Thread.State: TIMED_WAITING (sleeping)
     at java.lang.Thread.sleep(Native Method)
     at oracle.jdbc.pool.OracleConnectionCacheTimeOutThread.run(OracleConnectionCacheTimeOutThread.java:80)
"LDAPConnThread-0 ldap://10.47.24.141:9001" daemon prio=10 tid=0x61cb5400 nid=0x1b1 runnable [0x5fb55000..0x5fb55db0]
java.lang.Thread.State: RUNNABLE
     at java.net.SocketInputStream.socketRead0(Native Method)
     at java.net.SocketInputStream.read(SocketInputStream.java:129)
     at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
     at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
     - locked <0xf2d920a8> (a java.io.BufferedInputStream)
     at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
     at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
     at java.lang.Thread.run(Thread.java:619)
"DoSManager" daemon prio=10 tid=0x0932a000 nid=0x1b0 waiting on condition [0x5f9fe000..0x5f9fee30]
java.lang.Thread.State: TIMED_WAITING (sleeping)
     at java.lang.Thread.sleep(Native Method)
     at com.octetstring.vde.DoSManager.run(DoSManager.java:433)
"VDE Transaction Processor Thread" daemon prio=10 tid=0x61c07000 nid=0x1ae in Object.wait() [0x5fba6000..0x5fba7130]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2d70090> (a com.octetstring.vde.backend.standard.TransactionProcessor)
     at java.lang.Object.wait(Object.java:485)
     at com.octetstring.vde.backend.standard.TransactionProcessor.waitChange(TransactionProcessor.java:367)
     - locked <0xf2d70090> (a com.octetstring.vde.backend.standard.TransactionProcessor)
     at com.octetstring.vde.backend.standard.TransactionProcessor.run(TransactionProcessor.java:212)
"ExecuteThread: '16' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a67400 nid=0x1ad waiting for monitor entry [0x5fbf7000..0x5fbf7fb0]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '15' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a66000 nid=0x1ac waiting for monitor entry [0x5fc48000..0x5fc49030]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '14' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a65000 nid=0x1ab waiting for monitor entry [0x5fc99000..0x5fc99eb0]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '13' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a63c00 nid=0x1aa waiting for monitor entry [0x5fcea000..0x5fceaf30]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '12' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a62c00 nid=0x1a9 runnable [0x5fd3b000..0x5fd3bdb0]
java.lang.Thread.State: RUNNABLE
     at weblogic.socket.PosixSocketMuxer.poll(Native Method)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:102)
     - locked <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '11' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a61c00 nid=0x1a8 waiting for monitor entry [0x5fd8c000..0x5fd8ce30]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '10' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a60800 nid=0x1a7 waiting for monitor entry [0x5fddd000..0x5fdde0b0]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '9' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a6f400 nid=0x1a6 waiting for monitor entry [0x5fe2e000..0x5fe2f130]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '8' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928d400 nid=0x1a5 waiting for monitor entry [0x5fe7f000..0x5fe7ffb0]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '7' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928c000 nid=0x1a4 waiting for monitor entry [0x5fed0000..0x5fed1030]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '6' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928b000 nid=0x1a3 waiting for monitor entry [0x5ff21000..0x5ff21eb0]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '5' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0930c400 nid=0x1a2 waiting for monitor entry [0x5ff72000..0x5ff72f30]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '4' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928dc00 nid=0x1a1 waiting for monitor entry [0x5ffc3000..0x5ffc3db0]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '3' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x09288c00 nid=0x1a0 waiting for monitor entry [0x60014000..0x60014e30]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '2' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x092d4800 nid=0x19f waiting for monitor entry [0x60065000..0x600660b0]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x092d4400 nid=0x19e waiting for monitor entry [0x600b6000..0x600b7130]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0932d800 nid=0x19d waiting for monitor entry [0x60107000..0x60107fb0]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x0932c400 nid=0x19c in Object.wait() [0x60158000..0x60159030]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2daa030> (a weblogic.work.ExecuteThread)
     at java.lang.Object.wait(Object.java:485)
     at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:157)
     - locked <0xf2daa030> (a weblogic.work.ExecuteThread)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
"Thread-7" daemon prio=10 tid=0x0932e400 nid=0x19b waiting on condition [0x601a9000..0x601a9eb0]
java.lang.Thread.State: WAITING (parking)
     at sun.misc.Unsafe.park(Native Method)
     - parking to wait for <0xf2daa150> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
     at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
     at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
     at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
     at weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
     at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
     at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
     at weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
"weblogic.timers.TimerThread" daemon prio=10 tid=0x60467800 nid=0x19a in Object.wait() [0x603fe000..0x603fef30]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2daa2c0> (a weblogic.timers.internal.TimerThread)
     at weblogic.timers.internal.TimerThread$Thread.run(TimerThread.java:267)
     - locked <0xf2daa2c0> (a weblogic.timers.internal.TimerThread)
"weblogic.time.TimeEventGenerator" daemon prio=10 tid=0x60431800 nid=0x199 in Object.wait() [0x60555000..0x60555db0]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2daa380> (a weblogic.time.common.internal.TimeTable)
     at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:286)
     - locked <0xf2daa380> (a weblogic.time.common.internal.TimeTable)
     at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:117)
     at java.lang.Thread.run(Thread.java:619)
"[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x6042e000 nid=0x198 runnable [0x605a5000..0x605a6e30]
java.lang.Thread.State: RUNNABLE
     at java.util.HashMap.<init>(HashMap.java:209)
     at java.util.jar.Manifest.<init>(Manifest.java:37)
     at java.util.jar.JarFile.getManifestFromReference(JarFile.java:160)
     at java.util.jar.JarFile.getManifest(JarFile.java:146)
     at weblogic.utils.classloaders.GenericClassLoader$JarSource.getManifest(GenericClassLoader.java:528)
     at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:310)
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:288)
     - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
     - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
     at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:335)
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:288)
     - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
     at weblogic.ejb.container.deployer.EJBModule.setupEJBToImplClassDependencies(EJBModule.java:1790)
     at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:397)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
"Timer-1" daemon prio=10 tid=0x609e3800 nid=0x197 in Object.wait() [0x605f7000..0x605f80b0]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2d7a2c0> (a java.util.TaskQueue)
     at java.util.TimerThread.mainLoop(Timer.java:509)
     - locked <0xf2d7a2c0> (a java.util.TaskQueue)
     at java.util.TimerThread.run(Timer.java:462)
"Timer-0" daemon prio=10 tid=0x609e0000 nid=0x196 in Object.wait() [0x62350000..0x62351130]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2d7a3b0> (a java.util.TaskQueue)
     at java.util.TimerThread.mainLoop(Timer.java:509)
     - locked <0xf2d7a3b0> (a java.util.TaskQueue)
     at java.util.TimerThread.run(Timer.java:462)
"RMI TCP Accept-9896" daemon prio=10 tid=0x61ebf800 nid=0x194 runnable [0x623ba000..0x623bb030]
java.lang.Thread.State: RUNNABLE
     at java.net.PlainSocketImpl.socketAccept(Native Method)
     at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
     - locked <0xf2d76210> (a java.net.SocksSocketImpl)
     at java.net.ServerSocket.implAccept(ServerSocket.java:453)
     at java.net.ServerSocket.accept(ServerSocket.java:421)
     at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
     at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
     at java.lang.Thread.run(Thread.java:619)
"RMI TCP Accept-0" daemon prio=10 tid=0x61eb6c00 nid=0x193 runnable [0x6240b000..0x6240beb0]
java.lang.Thread.State: RUNNABLE
     at java.net.PlainSocketImpl.socketAccept(Native Method)
     at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
     - locked <0xf2da0170> (a java.net.SocksSocketImpl)
     at java.net.ServerSocket.implAccept(ServerSocket.java:453)
     at java.net.ServerSocket.accept(ServerSocket.java:421)
     at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
     at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
     at java.lang.Thread.run(Thread.java:619)
"Low Memory Detector" daemon prio=10 tid=0x63b01400 nid=0x192 runnable [0x00000000..0x00000000]
java.lang.Thread.State: RUNNABLE
"CompilerThread1" daemon prio=10 tid=0x63901c00 nid=0x191 runnable [0x00000000..0x634f3278]
java.lang.Thread.State: RUNNABLE
"CompilerThread0" daemon prio=10 tid=0x63900800 nid=0x190 runnable [0x00000000..0x635742f8]
java.lang.Thread.State: RUNNABLE
"Signal Dispatcher" daemon prio=10 tid=0x0919e000 nid=0x18f waiting on condition [0x00000000..0x00000000]
java.lang.Thread.State: RUNNABLE
"Finalizer" daemon prio=10 tid=0x09183000 nid=0x18e in Object.wait() [0x63aad000..0x63aae130]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2d8e2d0> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
     - locked <0xf2d8e2d0> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
     at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=10 tid=0x09181c00 nid=0x18d in Object.wait() [0x63afe000..0x63afefb0]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2daa4c8> (a java.lang.ref.Reference$Lock)
     at java.lang.Object.wait(Object.java:485)
     at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
     - locked <0xf2daa4c8> (a java.lang.ref.Reference$Lock)
"main" prio=10 tid=0x0900f000 nid=0x17b in Object.wait() [0xf7f1d000..0xf7f1e208]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2d723c8> (a weblogic.t3.srvr.SubsystemRequest)
     at weblogic.t3.srvr.SubsystemRequest.rendezvouz(SubsystemRequest.java:100)
     - locked <0xf2d723c8> (a weblogic.t3.srvr.SubsystemRequest)
     at weblogic.t3.srvr.SubsystemRequest.action(SubsystemRequest.java:81)
     at weblogic.t3.srvr.SubsystemRequest.start(SubsystemRequest.java:51)
     at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:457)
     at weblogic.t3.srvr.ServerServicesManager.startInAdminState(ServerServicesManager.java:237)
     - locked <0x6536b220> (a java.lang.Class for weblogic.t3.srvr.ServerServicesManager)
     at weblogic.t3.srvr.T3Srvr.initializeAdmin(T3Srvr.java:738)
     at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:499)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
     at weblogic.Server.main(Server.java:67)
"VM Thread" prio=10 tid=0x0917e800 nid=0x18c runnable
"GC task thread#0 (ParallelGC)" prio=10 tid=0x09015c00 nid=0x17c runnable
"GC task thread#1 (ParallelGC)" prio=10 tid=0x09016c00 nid=0x17d runnable
"GC task thread#2 (ParallelGC)" prio=10 tid=0x09018000 nid=0x17e runnable
"GC task thread#3 (ParallelGC)" prio=10 tid=0x09019000 nid=0x17f runnable
"GC task thread#4 (ParallelGC)" prio=10 tid=0x0901a000 nid=0x180 runnable
"GC task thread#5 (ParallelGC)" prio=10 tid=0x0901b000 nid=0x181 runnable
"GC task thread#6 (ParallelGC)" prio=10 tid=0x0901c400 nid=0x182 runnable
"GC task thread#7 (ParallelGC)" prio=10 tid=0x0901d400 nid=0x183 runnable
"GC task thread#8 (ParallelGC)" prio=10 tid=0x0901e400 nid=0x184 runnable
"GC task thread#9 (ParallelGC)" prio=10 tid=0x0901f400 nid=0x185 runnable
"GC task thread#10 (ParallelGC)" prio=10 tid=0x09020800 nid=0x186 runnable
"GC task thread#11 (ParallelGC)" prio=10 tid=0x09021800 nid=0x187 runnable
"GC task thread#12 (ParallelGC)" prio=10 tid=0x09022800 nid=0x188 runnable
"GC task thread#13 (ParallelGC)" prio=10 tid=0x09023800 nid=0x189 runnable
"GC task thread#14 (ParallelGC)" prio=10 tid=0x09024c00 nid=0x18a runnable
"GC task thread#15 (ParallelGC)" prio=10 tid=0x09025c00 nid=0x18b runnable
"VM Periodic Task Thread" prio=10 tid=0x61ec2000 nid=0x195 waiting on condition
JNI global references: 957
Heap
PSYoungGen total 229376K, used 39147K [0xe4d70000, 0xf4d70000, 0xf4d70000)
eden space 196608K, 8% used [0xe4d70000,0xe5cf3870,0xf0d70000)
from space 32768K, 70% used [0xf2d70000,0xf4427708,0xf4d70000)
to space 32768K, 0% used [0xf0d70000,0xf0d70000,0xf2d70000)
PSOldGen total 1835008K, used 0K [0x74d70000, 0xe4d70000, 0xe4d70000)
object space 1835008K, 0% used [0x74d70000,0x74d70000,0xe4d70000)
PSPermGen total 62208K, used 62093K [0x64d70000, 0x68a30000, 0x74d70000)
object space 62208K, 99% used [0x64d70000,0x68a134a8,0x68a30000)

Macintosh Color Classic startup issues

Similar Messages

Maybe you are looking for