Macintosh HD "FULL" on new Macbook Pro?

Hi all,
So I just got a new Macbook Pro and after uploading all my software onto it, it's now telling me that there is no disk space on my Macintosh HD disk. When I opened the disk it said that all 500 GB were full. However, I don't see how this could be. On my old macbook that I upgraded from, I had virtually all of the same applications (plus music, movies, and pictures) and I had only used 150/160 GBs. So now I have triple the space, but it's already full? That doesn't make sense, or am I missing something? The only new applications that I have on my Macbook Pro are Adobe Lightroom and Livescribe, both of which are about 200 MBs combined.
Anyone have any trouble shooting suggestions?

Hi R,
I don't know what you've tried or not so far, so the first step is just to do a restart.

Similar Messages

  • Startup disk full on new Macbook Pro

    I bought a Late 2013 13 inch 8 gb Macbook Pro to replace a mid 2010 that had hung up during an update and seized up. I migrated a backup of the 2010 to the 2013 and immediately began getting "startup disk full" notices.  I mainly use it for pictures and music and very little document type stuff.  I have emptied the trash and repaired permissions and emptied email and downloads etc. I can't figure out what is taking up my space.  Storage looks like this, 16.94 free of 250.14. Other storage 166 gb, Apps 37 gb, Photos 14 gb, Movies 5 gb, Audio 10 gb.  Any suggestions?

    Freeing Up Space on The Hard Drive
      1. See Lion/Mountain Lion/Mavericks' Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Also see Freeing space on your Mac OS X startup disk.
      5. See Where did my Disk Space go?.
      6. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

  • A New Macbook pro with a Dell ST2310 23in. Full HD Monitor

    I have a new macbook pro hooked up to a dell Full HD monitor using mini display port to VGA connection. And the fonts on are not that crisp. They are a little jagged. The res is set at 1920x1080, 60.0Hz. Is there something I can do to fix this? I've been on dells site and there is not much support for mac users.
    thanks
    Karen

    Things would be working better from a digital connection. But if you must use VGA, check the Dell site or the user manual for how to "tune" the display. There is usually an AUTO adjust shortcut for this through one of the front panel buttons.

  • Hi, Im new to Apple MacBook PRO. I have saved about 50GB files plus applications and message advises that my start up disk is almost full! My MacBook pro has a 500GB hard drive so don't know why this message is coming up. Please help.

    Hi, Im new to Apple MacBook PRO. I have saved about 50GB files plus applications and message advises that my start up disk is almost full! My MacBook pro has a 500GB hard drive so don't know why this message is coming up. Please help.

    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro 
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion?view=discussi ons

  • Winmagic Securedoc and New Macbook Pro for Full Disk Encryption (FDE)

    Hi, I wonder if anyone had any experience with this. I've installed a seagate Momentus FDE drive (...421 series) on my new macbook pro and tried installing Winmagic securedoc to manage full disk encryption. It seems that despite all their recommendations re: hibernatemode and lidwake and sleep vs hibernation, the MBP crashes when I close the lid and then awaken it (by opening and pressing the power button). It cannot be awakened via an external keyboard either. Note that both hibernate and sleep work fine without securedoc. As securedoc appears to be the only viable FDE solution, I'd really like to get it working. Has anyone had any luck getting it to work with the new MBPs?

    PGP is another alternative as I have used it for the past few years on all of my Macbook Pros. I also own SecureDoc but have not installed it on the new Macbook yet.
    I do know that PGP disables hibernate during the install as it can cause problems.

  • I have a 500 gig time capsule.  I have used with a Macbook.  The Macbook has a 500 gig hard drive which is about 3/4 full.   Now we just purchased a new MacBook pro with a 1 TB hard drive.   Do I need to buy a larger Time Capsule?

    I have a 500 gig time capsule.  I have used with a Macbook.  The Macbook has a 500 gig hard drive which is about 3/4 full.   Now we just purchased a new MacBook pro with a 1 TB hard drive.   Do I need to buy a larger Time Capsule?

    Do I need to buy a larger Time Capsule?
    Probably yes. You might be able to get the full backup of the new MacBook Pro on the Time Capsule, but it will not be long before the Time Capsule is out of space.
    Better to add a new Time Capsule and backup the new MacBook Pro to the new Time Capsule, and keep the old MacBook backing up to the old Time Capsule.
    If you do not want to add a new Time Capsule, another option would be to erase the Time Capsule disk and start over again with new backups of both Macs and move forward.

  • Startup disk almost full for brand new Macbook Pro with Mavericks

    I recently purchased a brand new Macbook Pro Retina that runs on Mavericks.  I keep getting a message saying that my start up disk is almost full, even though I have almost no files on the hard drive other than whatever was pre-installed by Apple. Does anyone know how to resolve this problem?

    OmniDisksweeper can help you find what's hogging your disk space, or help determinie if this is a bogus message.

  • New MacBook Pro hard drive is full - but Nearly All Files on DropBox. Please Help!

    I recently bought a new MacBook Pro and I am no longer able to download files from my email because it is out of space. I store everything on DropBox and nearly no files on the hard drive. I am looking for assistance to reduce the 72.68GB of "other" on my hard drive. Many Thanks!
    about my Mac:
    Storage Space:
    <Image Edited by Host to Remove Personal Information>

    You have a very small hard drive, and not enough free space for your computer to function well. You need an external hard drive. If you anticipate adding a lot more files, you can clone your existing system to the external, and then boot from it. Or you can shift some of the stuff that you currently store in Dropbox to a backup area on your external drive, and then cut down what you keep in Dropbox to contain ONLY the files that you need to be able to access when not at home. You can also change the location of your Dropbox folder, with the caveats noted at the bottom of the help article I have copied below:
    From Dropbox Help:
    How do I move my Dropbox folder to a new location?
    You can move your Dropbox folder to any location on your hard drive using the Dropbox desktop application. If you decide to move the folder, we strongly recommend choosing a location on the same hard drive as your operating system. Dropbox won't work correctly should the Dropbox folder ever become inaccessible.
    You can select the new location from the Dropbox desktop application preferences.
    Using the Dropbox desktop application on Mac OS X
    Click on the Dropbox icon from your menu bar.
    The Dropbox icon 
    Click on the gear icon and select Preferences... from the menu.
    Click the Account tab.
    Move the Dropbox folder location by selecting your folder from the drop-down menu labeled Dropbox location.
    Let Dropbox move your folder and its contents to its new location.
    Important: Your Dropbox folder will keep the same name as before and can't be changed by using the move feature. Dropbox will not sync your Dropbox folder if it has been manually renamed or moved through your operating system. If Dropbox loses track of your Dropbox folder, it will attempt to re-sync the folder in its entirety using its last known location.
    Dropbox for Business users: If you've connected a personal and a work Dropbox, you'll see both of your Dropboxes listed here. Select the correct toggle before moving the Dropbox folder location.
    For our advanced users
    If you want to put your Dropbox folder on an external drive, proceed with caution:
    The Dropbox folder must be available when your computer boots and before the Dropbox desktop application starts. Some USB drives, for example, take some time to mount before your computer recognizes them. The Dropbox desktop application could start before such a drive is ready and get confused. You'll receive an error and Dropbox will give you the opportunity to relink your Dropbox account or exit if it is unable to find your Dropbox folder.
    If the external drive is disconnected from the computer while Dropbox is running, there's a small chance that the application will start deleting files before realizing that the entire drive has been removed. Again: When it comes to using an external drive for your Dropbox folder, tread carefully.

  • New macbook pro 2012 preinstalled with lion can't be reinstalled?

    Hi everyone,
    I'm new to mac os x and I just bought a new macbook pro 13" four days ago which came preinstalled with mac os x lion.  I tried to do a clean install on the third day to experience doing it myself for the first time.  here's what I did:
    1st try
    @DU I perform erase Macintosh HD, set the partition table to GUID, partitioned the drive,
    exit DU and then selected reinstall mac os x from the mac os x utilities,
    I just clicked continue, continue, then it did some eligibility checking and verification.
    after a while the dialog window showed this message " This version of Mac OS X 10.7 cannot be installed on this computer."
    there's no other option below than quit.
    2nd try
    restarted macbook then pressed down option+command+r
    the globe logo came out.  I connected to my home wifi and a progress bar indicator came out.  after the progress bar completed, the Mac os x utilities came out.
    I selected reinstall mac os x from the mac ox x util.  I clicked on continue, continue.. an eligibility and verification followed and after a while I got the same message saying "This version of Mac OS X 10.7 cannot be installed on this computer."
    3rd try
    I restarted macbook again and pressed down option+command+r
    I did the steps from the 1st try again but I still get the same message "This version of Mac OS X 10.7 cannot be installed on this computer."
    Can anyone help me out on how to reinstall Lion? or did I missed out anything? or should I send this macbook for repair? or just return it?
    appreciate any advice...thanks.

    I remember something similar happening when OS X Lion was first released. At that time, the mid-2011 MacBook Air hit the store shelves and many users could not do a full reinstall from the Apple Servers. The reason, was that the MacBook Air had a specialized version of OS X Lion with a build number that has 4 numbers (i.e. build 11AXXXX) following the OS release number. In contrast, the release version of OS X at the time was 11A511 which uses 2 or 3 numbers and is a universal version of OS X that can be used by any Mac. The reason why you are experiencing problems installing OS X Lion is because you got the newest MacBook Pro which has a specialized build of OS X Lion and as in previous cases, it has 4 numbers meaning that it is a specialized version of OS X.
    You appear to be running the following version of OS X Lion:
    As you can see, it's an exclusive and optimized version of OS X for your MacBook. Your only hope is that Apple releases the OS X 10.7.5 release which most likely be universal with all Macs.
    I suggest going to the Genius Bar to sort things out.
    Hope my little explanation helps.
    To Learn More about OS X versions visit:
    Mac OS X versions (builds) for computers

  • Strange wifi problem on a brand-new MacBook Pro

    Hey there, I'm new here. Desperation has got the better of me, and I hope I can get some advice.
    So, last sunday I bought a brand new 13" MacBookPro with 2.8g i7 processor and 10.7.2 OS (I can't update to 10.7.4 because System Update tells me the download has been tampered with or corrupted after I waited 2 hours for it to finish, but I'm trying a direct download from the website). Here's the exact product: http://www.amazon.com/Apple-MacBook-MD314LL-13-3-Inch-VERSION/dp/B005CWIZ4O/ref= sr_1_5?ie=UTF8&qid=1340301247&sr=8-5&keywords=macbook+pro+13
    Everything is all perfect except for a strange wifi problem. Note that the wifi does not turn-on or off, it doesn't disconnect after 'sleep', it doesn't get less speed, it doesn't constantly leave a preferred connection (once I chose my home wifi it always connects to it no problem). The wifi bar is always full. What is wrong is that the internet is kinda 'glitchy'. The best metaphor I can think of is that it's like a car that has to be pushed down the road before the engine can start. Please, bear with me because this is kinda hard to explain and I'm not good at tech lingos.
    One of the symptoms is browsing can get really slow and inconsistent, almost as if the wifi gets turned off in the middle of browsing. For example: if I look something up on Google and then open 5 new tabs, probably only 2 or 3 of those tabs will eventually load while the other two will not get past the long 'http:.......google.....etc etc' address and will eventually show one of those 'error loading page because there's no Internet connection' notice. This happens a lot. Sometimes I have to refresh/retry loading a page a couple of times before it finally loads, then usually everything will get back to normal and I will be able to open multiple tabs with no problem, but in a couple of minutes I would try to open another site and the problem will start again.
    So I tried to see how it does with downloading using iGetter. Fortunately I also have a Macbook (white-plastic casing one) and my brother has an old 2006 MacbookPro so I can compare. With those two older Apples iGetter starts receiving data in less than 8 seconds after I click Start, while my brand-new Macbook Pro can take up to 15-20 seconds, sometimes it doesn't even start at all and I have to re-click the start button. But once the download actually starts (on my new MacBook Pro), it downloads like normal, it doesn't stop and the speed is also as good as I can get. Strange huh? Hence, like a car that has to be pushed before the engine starts.
    I also tried 'speed testing' from a website with all 3 laptops. On my old MacBook and my brother's MacBook pro, once I click 'begin test' it takes only a couple of seconds of 'ping' before the download/upload speed measurements start, but with my new MacBook Pro (just like with iGetter) it takes up to almost a minute before the measurements start, sometimes it won't start at all and I have to re-start the test.
    Well, thanks for reading. And hope you can help me shed some light into this. Because it is really preventing me from really enjoying my new MacBook Pro. And if this is most likely a hardware problem, I'd better get back to the store and try to get it replace or something while it's only been 5 days. *cheers*

    Hey guys.. Thanks for the replies. Unfortunately, I bought the MacBook in Indonesia where there are no such thing as an AppleCare. The only option is to leave the Apple product to one of the 'Authorized Apple care centre' and have whoever do whatever to it without guarantee of success. As for returning it and getting a brand new one, I also don't know if there is such a deal here, but that's actually a good idea, will try to go to the store tomorrow. Although, I'm worried that the problem might be with OSX Lion or something and getting a new one won't help.
    mark75090, I've tried resetting the router when I first noticed te problem, didn't work though. I've checked my new MacBook's wi-fi (option+click wifi bar) and it says 'PHY Mode: 802.11g', so does my MacBook and the old MacBook Pro. I don't know what those mean though, and I don't know whether or not my router is an N., can you tell me more please.. I have tried with the other two turned off, and only the new MacBook using the wi-fi but the problem persists. I have also tried connecting directly to the router, but as I described, the problem is too subtle for me to notice the difference.
    Also, if I create a brand new Wi-Fi connection in network preferences and connect to my router through the new Wi-Fi profile, the problem seems to be gone for an hour or so, then it always comes back though. I have also just finally installed 10.7.4, but it doesn't help either.

  • What kind of longevity can I expect from the SSD in a new MacBook Pro with Retina Display?

    Hi all,
    I recently ordered a new MacBook Pro with the Retina Display. This will be both my first computer and my first Mac that uses a SSD as the primary storage device. As the title of this post suggests, what I would like to know is what sort of lifespan/longevity can I expect to get out of it? My current MacBook Pro was manufactured in 2007 and has a stock 160GB Fujitsu hard drive that has been fantastic for me over the past 4-5 years. It continues to run like a champ, and I would hope that a brand new SSD would be able to last at least that long. Given that the new retina MBPs cannot be upgraded or (easily) user-serviced, I am somewhat curious to know whether or not Apple's new proprietary SSD modules will give out/slow to a crawl before/after my new machine becomes completely obsolete. I have been searching for articles published within the past few months on whether or not the current crop of SSDs on the market are more reliable than those introduced a year or two ago, but alas, I haven't had much luck. Perhaps it is still too early to tell?
    I found a few discussion threads on here somewhere where some users indicated that their original MacBook Airs, or other SSD-equipped MacBooks, were still performing quite well and responsively after a few years of use. Can anyone substantiate this for me? How long have you been using your SSD(s) in your Mac(s), and do you think the newer models will be able to last several years? I would greatly appreciate any insight.

    ARealMac(PPC)User wrote:
    ...I found a few discussion threads on here somewhere where some users indicated that their original MacBook Airs, or other SSD-equipped MacBooks, were still performing quite well and responsively after a few years of use. Can anyone substantiate this for me? How long have you been using your SSD(s) in your Mac(s), and do you think the newer models will be able to last several years? I would greatly appreciate any insight.
    While I think your concern is legitimate (it was mine too), I think to some extent, how long they last will be up to you. The individual cells in the flash media in an SSD have limited life spans, and SSD controllers have a variety of techniques to spread that wear around evenly (wear leveling). That wear is exacerbated by the controller having to erase a whole block of data when even just one page needs to be changed, and if not all the data in the block is still valid, more data than necessary gets moved (write amplification). To provide some extra room for all this reshuffling of data, SSD manufacturers build in extra space that's inaccessible to the user (over-provisioning), but it typically runs about 7%. (This is a good discussion of the inner workings of all this)
    If you stuff your SSD full of files, so that there's very little room to do all this rearranging, I think you'll experience the slowdown you're concerned about. TRIM, which Apple's SSD's support, will help, but you can too. Allow plenty of free space on your SSD and perhaps partition it so that there is free space outside the partition (check this out to see what a difference it can make). You can't use it but the controller can as an extension of the built-in over-provisioning.
    You also mention that you "will most likely use it to record several tracks and store my growing library of songs and videos." Why not instead use an external SSD connected via USB 3.0 for storage? They're relatively cheap, very fast, and keep the space on your internal working drive free. A BootCamp partition would also take up space, so you might consider using Windows in a Virtual Machine instead. VMware Fusion or Parallels would be installed on the internal SSD but the virtual machine files could  go on the external.
    In any case, your data is more important than your SSD, so back up, back up, back up.

  • I just got a new macbook pro. How do I get the 900  songs that I took off of cds into iTunes on my computer from my iPhone. I had no problems syncing the music I had purchased from iTunes. I have tried to sync it using iTunes match, this did not work.

    I just got a new macbook pro. How do I get the 900+  songs that I took off of cds into iTunes on my computer from my iPhone. I had no problems syncing the music I had purchased from iTunes. I have tried to sync it using iTunes match, this did not work. I would like to have access to my full library without going into the user profile of my old computer, which is on my new computers hard drive. I would like to eventually delete the old profile so that I have more space on my hard drive.

    http://support.apple.com/kb/HT4527?viewlocale=en_US&locale=en_US

  • New macbook Pro setback for Audio Production.

    the new macbook pro don't come with a Firewire 400 port anymore.
    everybody knows that usb is too slow for audio transfer and Firewire 800 is usual.
    audio interfaces that use firewire 400 can't be used and with only one firewire 800 port there's no room left 'cause we need that to connect the external drives with audio files.
    most interfaces need to be connected directly to the computer.
    Any Ideas????

    I, too, have an issue with the port configuration on MBPs -- too many USB2.0 ports, not enough FW800 ports. Nevertheless, please note that:
    1. Bilingual FW800 FW400 cables (really good ones) are available for less than $20.
    2. You can daisy chain external FW HDDs (even heterogeneously, i.e. you can cable your computer to a FW800 device using a FW800 cable and then use a FW400 cable to connect the first drive to a FW400 HDD, etc.). This capability is dependent on having redundant or multi-protocol drive enclosures (that is, you will need drives that have at least two FW ports, such as two FW800 ports or a FW800 port plus a FW400 port, not just a single USB2.0 port).
    3. You can go hog wild and purchase a full-on FW800 hub/repeater like the NitroAV Professional Firewire/1394b 8-Port device (google it). I use this device to connect five external HDDs to my MBP (four FW800 drives and one FW400 drive). This hub will set you back $150 -- not trivial, but an elegant solution if you use multiple drives, and it comes with the AC power adapter (believe it or not, some hub manufacturers require you to purchase the AC adapter separately). In my configuration, six ports are used -- five for the drives and the sixth to connect the MBP via a FW800 cable. The hub has the additional advantage of eliminating several of the cables that would otherwise connect directly to my computer, which is, after all, a laptop; the fewer things I have to connect/disconnect when I move my MBP around, the better. You can think of this as a do-it yourself version of the docking station that Apple forgot to give us, at least as far as drive connectivity is concerned!
    As an aside, my MBP (see model notes below) does in fact have both a FW800 and a FW400 port. I wish Apple configured unibody MBPs to include two USB2.0 ports and two FW800 ports -- but the above tips make the world right.
    Finally, I just don't get the gripe about cabling costs. The unibody MBPs are high end laptops -- most purchasers will have invested well over $3K in their machines. There are a thousand usage patterns; I would much rather buy what I need for my applications without incurring the expense of purchasing bundled stuff that I don't need and which winds up in a (bursting at the seams) cable/doodad drawer.

  • HT201457 Where can I purchase a Windows 8.1 download for my new Macbook Pro 15 inch Retina?

    I want to install Windows 8.1 on my new Macbook Pro i7 intel core 2.2 GHz VIA Bootcamp Application. I want to purchase a download Windows 8.1 because I do not have a DVD slot. I want a legal official download from official Microsoft/Windows/Apple/Bootcamps legal websites please. No cracked versions or free anything I can purchase it. But I have a macbook pro without a DVD slot so I need a download please. Can anyone give me a link to where I can download a Windows 8.1 official full version to purchase on Microsoft. I have found this -- http://www.microsoftstore.com/store/msusa/en_US/pdp/Windows-8.1/productID.288401 200?icid=L3_Nav_Store_windows81_011415 -- Will this download be compatible with my mac for bootcamp? THANK YOU!
    ** MY MACBOOK INFORMATION / SPECS **
    Type - MacBook Pro i7 intel core Intel Iris Pro Graphics card. 15 Inch retina display. (Mid 2014)
    Memory - 16 GB 1600 MHz DDR3
    When Purchased - I purchased this Macbook Pro about 4 days ago.

    Microsoft store will provide a download manager (.exe) using your Product Key, which needs to be run on a PC. This manager will then let you download an ISO image to a USB and/or DVD.

  • Trouble with a new MacBook Pro - times 3 now..

    Hi all,
    Trouble Trouble Trouble - my frustrations with Apple:
    1) MacBook Pro -bought 19th nov 2009- Death On Arrival, 4HDD/11/40000004:SATA(0,0)
    Been sent back to Apple and I got a new one.
    New MacBook Pro -got it on the 25th nov 2009- Started to have random Kernel Panic's 2nd of November:
    2) Kernel Panic's everywhere.. even on the Mac Bootdisc with Disk Utility.. as random as they appeared, so random they went away. Just to be sure on the Apple helpdesk they advised me to cleaned disk and reinstalled everything. Lucky I made a back-up when it was still working.... otherwise I'd have lost everything.
    3) Worked well for 2 or 3 days and now -6th dec 09- all the sudden it doesn't want to start anymore. Giving me 9 beeps at start-up on a black screen in the morse code s.o.s. 3x short, 3x long, 3x short)
    Apple?
    I'm sure when I call Apple tomorrow I'll have to bring away my notebook to an Apple Service Provider cause they can't help me on the phone. If so, I will have to wait for another 20 days(experience in the past with my bro's MacBook for a new harddisk(!)).
    I used to be a PC-guy and took the brave step to be a full-time Apple-guy, but this is just frustrating me. Sold my old laptop and now I'm without one for ages.
    What would my options be? Could I get a complete new notebook?
    Niek

    Giving me 9 beeps at start-up on a black screen in the morse code s.o.s. 3x short, 3x long, 3x short)
    Sounds like bad RAM:
    http://support.apple.com/kb/HT2341?viewlocale=en_US
    Or bad power.
    Have you attempted to change the power supply or power source? If it isn't plugged into a surge protector, you may have issues with your house power that create problems for multiple computers.
    Also, be sure you aren't damaging the power cable unintentially*:
    http://www.macmaps.com/frayguide.html
    This is a user to user board.
    Call Apple directly at:
    (31) 0900 7777 703
    And let them know your repeated issues. They could give you a replacement machine, but also ask for a replacement power brick to at least test the theory the power brick may be damaged.
    - * Links to my pages may give me compensation.

Maybe you are looking for

  • Xf86-video-ati direct rendering yes, but glxgears shows nul [solved]

    glxinfo says i have direct rendering, but glxgears does not show anything (it still processes stuff, and gives me fps (which vary with the size and visibility of the window)) so here are the log/outputs that might have the answer: glxinfo $ glxinfo ~

  • SQL Query : Order By issue with HUGE Table

    Hello friends, I have been through a terrible issue with order by. I would appreciate your help. Please let me know, your input for my case: => if i run select query it returns result quick in some milliseconds. (sql dev. fetches 50 rows at a time) =

  • RFC JCO connection

    Hi, Wanted to create JCO connection from EP to CRM server . Can you please guide how to create JCO conenction. As per my knowledge in Visual admin - >JCO RFC provider  we need to create . not sure what are the entries to maintain. Thanks Tom

  • The Note 4 slows down the wifi when connected, constant data transfer.

    The Note 4 locks up our wifi with excessive data traffic, our S5 phones do not do this. What should we look at in settings, apps, etc to fix this. It cannot be connected to wifi in its current state!

  • Exporting from ical to numbers Spreadsheet?

    I have a large number of dates that are currently in ical that I need to export into numbers to create a spreadsheet for tax purposes. Is this supported by Apple somewhere that I am not finding. I can only seem to export a .ics file that will not ope