Macintosh HD has S.M.A.R.T. Problems
i have downloaded Mountain Lion and when selecting the disk for it to be installed on it says that Macintosh HD has S.M.A.R.T. problems. Can anyone assist me with this?
That means your hard drive is failing. You need to have it replaced.
Similar Messages
-
Photos from my iphone and ipad are going into my photo stream on the devices but aren't going into the folder on my windows PC. They used to but they suddenly stopped. Has anyone else had this same problem?. I have checked all settings and they appear OK
Hi AP_In_Surbiton,
I am really sorry that you have had so much trouble getting your Caller ID up and going. I'll be happy to help you out with this and get it working for you.
Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
JerryThanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry -
Your computer has shut down because of a problem
Hi there,
I have a Macbook Air which is about 3 months old now, and in the last couple of months, applications have started hanging, the keyboard is sluggish in Safari, and more specifically, I've had loads of times when I've opened the lid after the machine has been on sleep, and received the message "Your computer has shut down because of a problem".
I've been on to Apple support, and they took me through how to repair disk permissions, reset the System Management Controller, and clear the caches. But I just had the same thing this morning.
The latest kernel panic from the Console is shown below - is anyone able to shed any light on this?
Thanks
Stuart
Sun Jan 20 02:12:31 2013
panic(cpu 2 caller 0xffffff8005ab7e75): Kernel trap at 0xffffff8005a43ca1, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff801b98ed88, CR3: 0x0000000007d01000, CR4: 0x00000000001606e0
RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x0000000009000000, RDX: 0xffffff80171cf7c0
RSP: 0xffffff80f61db2c0, RBP: 0xffffff80f61db2f0, RSI: 0xffffff80f61db398, RDI: 0xffffff80171cf7b0
R8: 0x0000000000000000, R9: 0x0000000000000132, R10: 0xffffff80f61dbe90, R11: 0x000000000feaa000
R12: 0xffffff801b98ed80, R13: 0xffffff80171cf7b0, R14: 0xffffff80f61db398, R15: 0xffffff80060e0ad0
RFL: 0x0000000000010282, RIP: 0xffffff8005a43ca1, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0xffffff801b98ed88, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff80f61daf60 : 0xffffff8005a1d626
0xffffff80f61dafd0 : 0xffffff8005ab7e75
0xffffff80f61db1a0 : 0xffffff8005acd3bd
0xffffff80f61db1c0 : 0xffffff8005a43ca1
0xffffff80f61db2f0 : 0xffffff8005a435d2
0xffffff80f61db3d0 : 0xffffff8005a245ed
0xffffff80f61db400 : 0xffffff8005def11a
0xffffff80f61db420 : 0xffffff8005def2d2
0xffffff80f61db450 : 0xffffff8005e50530
0xffffff80f61db470 : 0xffffff8005e501d1
0xffffff80f61db500 : 0xffffff8005e4fd3c
0xffffff80f61db560 : 0xffffff7f860161be
0xffffff80f61db600 : 0xffffff8005b1f855
0xffffff80f61db660 : 0xffffff8005adabe1
0xffffff80f61db750 : 0xffffff8005b1292e
0xffffff80f61db780 : 0xffffff8005ae16cf
0xffffff80f61db8c0 : 0xffffff8005ae0d6a
0xffffff80f61db920 : 0xffffff8005ae0c05
0xffffff80f61db950 : 0xffffff8005cfe410
0xffffff80f61db9f0 : 0xffffff8005b12549
0xffffff80f61dba50 : 0xffffff8005dbe4ec
0xffffff80f61dbad0 : 0xffffff8005a0508b
0xffffff80f61dbef0 : 0xffffff8005a06b9f
0xffffff80f61dbf60 : 0xffffff8005a85b38
0xffffff80f61dbfb0 : 0xffffff8005ab2957
Kernel Extensions in backtrace:
com.apple.iokit.IOStorageFamily(1.8)[A3CC4E44-8E10-3D9A-BA8E-95743E79D125]@0xff ffff7f8600a000->0xffffff7f8602efff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C3006
Kernel version:
Darwin Kernel Version 12.2.1: Thu Oct 18 16:32:48 PDT 2012; root:xnu-2050.20.9~2/RELEASE_X86_64
Kernel UUID: 0AFA55FD-872F-3BBE-8630-214EB586A16D
Kernel slide: 0x0000000005800000
Kernel text base: 0xffffff8005a00000
System model name: MacBookAir5,2 (Mac-2E6FAB96566FE58C)
System uptime in nanoseconds: 33825093742539
last loaded kext at 30812273362661: com.trusteer.driver.gakl_driver_2 1 (addr 0xffffff7f8766b000, size 28672)
last unloaded kext at 15361113093292: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f8765d000, size 12288)
loaded kexts:
com.trusteer.driver.gakl_driver_2 1
net.telestream.driver.TelestreamAudio 1.1.0
com.apple.filesystems.smbfs 1.8
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.1.2f9
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AGPM 100.12.81
com.apple.driver.ApplePlatformEnabler 2.0.6d1
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.5fc10
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.2f9
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleMikeyDriver 2.3.5fc10
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.13
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleBacklight 170.2.5
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.AppleIntelHD4000Graphics 8.0.6
com.apple.driver.AppleIntelFramebufferCapri 8.0.6
com.apple.driver.AppleUSBTCButtons 237.1
com.apple.driver.AppleUSBCardReader 3.1.7
com.apple.driver.AppleUSBTCKeyboard 237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AppleUSBHub 5.5.0
com.apple.driver.AirPort.Brcm4331 612.20.14
com.apple.driver.AppleUSBXHCI 1.5.1
com.apple.driver.AppleAHCIPort 2.5.1
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.3.5fc10
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.3.0d47
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.2f9
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOBluetoothFamily 4.1.2f9
com.apple.driver.AppleGraphicsControl 3.2.13
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleHDAController 2.3.5fc10
com.apple.iokit.IOHDAFamily 2.3.5fc10
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5
com.apple.iokit.IOUSBMassStorageClass 3.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.driver.AppleUSBMultitouch 237.3
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.6
com.apple.driver.AppleUSBMergeNub 5.5.0
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.driver.AppleThunderboltNHI 1.6.3
com.apple.iokit.IOThunderboltFamily 2.1.8
com.apple.iokit.IOUSBUserClient 5.5.0
com.apple.iokit.IO80211Family 510.4
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IOUSBFamily 5.5.0
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0Any or all of the following third-party system modifications may be contributing to your problem:
Rapport
Telestream audio driver
If the panic is recurrent, I suggest you uninstall them, one at a time, according to the developers' instructions, to see whether you can identify which one is at fault. A conflict between modifications may be involved. Reboot and test after each uninstallation.
Uninstalling Rapport
Back up all data before making any changes. -
Hi, I reecntly purchased a Mac and the Pages App. But now I find that I cant open a document I have been working on. It has previously been saved without a problem now all I get is a box stating that the file cannot be opened. It is visible in both the Pages Windows and under Recent Items but just will not open. Any suggestions please?
Hi Colourdoodles,
Maybe the document is corrupted. Can you open other Pages documents? Preview may open it. Right click (or control click) on the document in Finder and Open With > Preview.
If that works, Edit > Select All, Edit > Copy. Then paste into a blank Pages document. Formatting may be messed up, but you will have editable text. Then Save (with a different name), close and see if you can open the new document.
Regards,
Ian -
i recently updated my macbook, i don't know if that has any effect to my recent problem, but when i try to download and save .mp3 files from the internet, like i have done in the past, it downloads but not as an mp3 file, its "blank" and when i try to open it, i can't? I NEED HELP !
Here is the download page
-
Subject:
Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz helpSettings>General>International.
Set the calendar to "Gregorian". You have it set to Buddhist. -
Hello
My system version 10.5.8
I have installed Safari update - 5.0.6 and the browser stopped working. At openingit shows the following icon:
"Safari has suddenly finished working. Possible problem is in the action of the plugin "TastyAppsAVPlugin".
After deleting all plugins from the folder "Internet Plugin", Safari worked again no problem, BUT all sites with flash content (e.g.YouTube) did not work.
I then tried the following experimental steps:
a) Moved all plugins from the folder "Internet Plugin" into a temporary folder.
b) Downloaded and istalled Adobe Flash Player version 10.3.181.34
c) Started Safari and it did not work ( same message"TastyAppsAVPlugin")
d) Deleted Adobe Flash Player from the folder "Internet Plugin". Safari worked.
e) Moved back all plugins, except Adobe Flash Player, from the temporary folder to "Internet Plugin" folder. Safari works... But Flash won't work!!! Before update to Safari 5.0.6 , ev erything worked perfectly well.
Guys, please solve the problem
Regards
Ruslan Reed
[email protected]MayaMa --
There are many threads on this. I typed "Uninstalling TastyApps" in the Google search, and came up with these:
http://www.google.com/search?client=safari&rls=en&q=Uninstalling+tastyapps&ie=UT F-8&oe=UTF-8
I do not know which of the many TastyApps haxies you have. Perhaps it would be better to contact them directly, once you know which of their products you have. -
When I plug my iPhone 4s into my PC, I get a message that says iTunes needs a newer version of Apple Mobile Device Support. It wants me to uninstall both the AMDS and iTunes and then reinstall iTunes. iTunes won't recognize my phone and so I can't synch it. Has anyone else run into this problem recently and how did you resolve it? Thanks!
Thank you both. I suppose I should have prefaced my question with the concern that I've read a number of other posts from people who have had a similar issue and when they tried to follow the directions, they ran into a multitude of other problems. As you might imagine, I'm hoping to avoid the creation of new problems as I try to solve this one. Thanks again.
-
My iPhone Wifi is greyed out.
In Uruguay in Cellular Center (+598 2 903 3333) that is where I buyed it told me it has no solution, it´s a problem of hardware accepted by Apple, that Apple change the phone in this cases, but that they can´t change it by another new one because their warrantee is 3 months and I bought in december, 2012. It cost me US$ 1,250 and I want a solution because I saw in the Apple web that iPhone warrantee is 1 year and I am still covered by it.
I have the invoice dated December 24, 2012.
Do you have any solution to my problem?
It is hard to believe that a so expensive iPhone has a life of 6 months.
Do I need to take my iPhone to anywhere they can solve its problem?
Thank you so much.Your Service and Support Coverage
iPhone 4S
Serial Number: C8PJHGELDT9V
Check another serial number
Valid Purchase Date
A validated purchase date lets Apple quickly find your product and provide the help you need.
Telephone Technical Support: Expired
You are eligible to purchase telephone technical support from an Apple Advisor.
Contact Apple Support
Repairs and Service Coverage: Active
Your product is covered for eligible hardware repairs and service under Apple's Limited Warranty.
Estimated Expiration Date: 10 December 2013
Learn about Apple's coverage information for your product.
Set Up a Repair
Eligible for the AppleCare Protection Plan
Get the AppleCare Protection Plan to extend your hardware repair coverage and add technical support for 2 years from your iPhone purchase date -
I really need help. I try to contact support to no avail. There simply is no option on the site, You are always referred to a further topic which has notihing to do with my problem. I bougnt a full master pack CS6 which I had installed on a mac for one year. Then, I decided to change it to another computer, so I sisintalled it according to instructions. In the meantime I got a free trial of creative cloud on that computer, but I gave up and decided to reinstall my cd-roms. However, everytime I try to use acrobat for instance it says that my trial period ran out! I disinstalled my cloud products, I am using my registered full master series items, they have nothing whatsoever to do with my creative cloud FREE subscription. If I try to cancel my free membership, it is to no avail, there simply is no such possiblity. I want to use the software I paid dearly for, not the cloud items I disinstalled and which do not interest me. How can I contact Adobe to fix it? It was no fault of mine, I did all I was supposed to, disintalling items before installing the right ones, but the system must have some error i am not responsible for.
open an app and click help>activate.
if you try to open an app and see a 'your trial has expired" window, click license this software and enter your serial number.
if you can't do either, run the cleaner and make sure cc is cleaned from your computer, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
Why does my iPad Air shows no service on the top left hand corner? It has been working fine previously, the problem started after upgrading to IOS 7.1.2
If you are not using Cellular Data, turn it off.
-
Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
Interestingly they both appear in the System Profiler, but just not working the same as before
I have tried other USB ports, but the same responce,yes I did reset the PRAM, but no benefit, still the same problem
my usb devices are: keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
here is a cut and paste of the current "System Profiler>Hardware>USB" (usb device tree)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x18
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x19
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f -
I have installed creative cloud and a trial version of illustrator on my laptop since then my IT department has purchase illustrator but is having problems installing it onto a PC workstation.
Hi, the problem is that my IT department was sent a link on his laptop to install Illustrator, however the request was for them to build me a workstation and install it on there. they have built the workstation and is having problem installing the CC desktop app on there, just to clarify would you be able to answer the following:
1) Do you have to have CC desktop app to install Illustrator from the given link?
2) If you have signed up & installed CC on your laptop, can you install illustrator on a workstation by simply installing the CC desktop app on the workstation, log into that with your username & activate the link to install illustrator, basically the provided link should not be specific to a computer or user?
Thanks -
I have a local VI that is simply a control that writes to the datasocket server whenever the control value changes.(the dataitem on the server is permanent - its initialized and never released by the server)
In the same local VI I have a datasocket read polling a different dataitem on the server.
The remote machine has a VI that reads the permanent dataitem on the server once per second.
For some reason, after adding the local VI mentioned above, the remote VI stopped picking up the first change in the permanent variable.
I'd start both the local and remote VIs...
Then change the local control and the remote V
I would not update - as if the datasocket write(upon adjusting the control) did not take place. So I'd change the control value again - this time the remote VI would update to this new value. And from here on out - the remote VI would update correctly. This problem only occurs when the local VI is first started up.
What in the heck is going on?dingler44 wrote:
>
> Has anyone else ever had a problem where you had to perform 2
> datasocket writes before the datasocket read would pick up the change?
>
> I have a local VI that is simply a control that writes to the
> datasocket server whenever the control value changes.(the dataitem on
> the server is permanent - its initialized and never released by the
> server)
> In the same local VI I have a datasocket read polling a different
> dataitem on the server.
> The remote machine has a VI that reads the permanent dataitem on the
> server once per second.
> For some reason, after adding the local VI mentioned above, the
> remote VI stopped picking up the first change in the permanent
> variable.
> I'd start both the local and remote VIs...
> Then change the local control and the remote VI would not update -
> as if the datasocket write(upon adjusting the control) did not take
> place. So I'd change the control value again - this time the remote
> VI would update to this new value. And from here on out - the remote
> VI would update correctly. This problem only occurs when the local VI
> is first started up.
>
> What in the heck is going on?
Gorka is right, this came up on Info-LV a few days ago. Someone
described a similar problem. I replied that I had seen similar
behaviour, reported it to NI, and they verified a bug. There is no fix
yet, but they are aware of it and will fix it. No anticipated release
date for the fix.
Regards,
Dave Thomson
David Thomson 303-499-1973 (voice and fax)
Original Code Consulting [email protected]
www.originalcode.com
National Instruments Alliance Program Member
Research Scientist 303-497-3470 (voice)
NOAA Aeronomy Laboratory 303-497-5373 (fax)
Boulder, Colorado [email protected]
Maybe you are looking for
-
How to unlock all the tables & schemas in Oracle 9i
plz help me out with how to bring isqlplus screen & how to unlock all the schemas & tables...
-
What Exactly should be in the Capture Scratch Folder ?
I apologize for the moronic question, but..... I recently installed a second internal Hard Drive in my computer which I was planning to reassign the scratch disc folder to, so that my external hard drive which holds all the media / video, would not h
-
Dear Room I'm configuring MySQL Server 5.0 when I got to the last window and clicked on Execute, the three steps (Prepare configuration, Write configuration file, Restart service) got through. But the last step (Apply security settings) couldn't get
-
Emac is full of junk, want to start over.
I have all of the discs I got from Apple when I bought this computer in '03. I have 4 discs here for OS.X. How do I dump all the crap off, and just put the stuff on again? thanks, Jon
-
Updating the Moving Average Price
We want to adjust the price of a material to account for storage overhead by adding 10% to the price. We have found procedures to modify the price if the price control is standard, but none for moving average prices. As I understand it, the movi