Macintosh SE Superdrive Networking TCP/IP via Ethernet

I'm currently working on networking my Macintosh SE Superdrive to my TCP network via it's ethernet port. My problem is that Network (Control Panel) always returns an error when I try changing from LocalTalk to it. When I change it only in MacTCP I have to manually configure the Address (Selecting Server does not work). After that MacWeb can't find the server and Ircle reports that there is an error with MacTCP. I'm running Macintosh System 7.1. If anyone has experence networking Classic macs via ethernet I'd appreciate any help.
Computer:
Macintosh SE Superdrive
1.4MB Internal Floppy Drive
800KB External Floppy Drive
20MB Internal Hard Drive
Macintosh System 7.1

Network is used to select where your AppleTalk network is connected.
MacTCP is used to configure the TCP connection.
It sounds like you do not have the correct driver installed for your ethernet card.
Try the Mac Driver Museum for a driver.
www.macdrivermuseum.net
If you don't know what kind of ethernet card you have, then TechTool
www.tucows.com/preview/207029
may reveal this. Otherwise you may have to open up the Mac to see what kind of card it is.
Good luck.
Richard.
PowerMac G4/733 & SE/30 Mac OS X (10.2.x)

Similar Messages

HT4356 Can I use a 'pc' network printer connected via ethernet to the home wifi network ?

Can I use a 'pc' network printer connected via ethernet to the home wifi network ?
or must the printer I want to use also have a wifi connection ?
I have a home network using ethernet connected devices to a router, also attached to th erouter is a WiFi unit. We are using the WiFi unit to connect to the network and hence to the big wide WWW. We now want to print from our IPads pereferable to our netowk connected HP Officejet Pro 8500 A909a series. (not the wireless model).
I was using the HP ePrint app to print from the Ipad, but I do not fully understand how this works. It seems that you must use the app to do the printing which is fine for basic email and photos, but I can not access the drawing package I have, and want to print from it. Please what is it that I do not understand.

You must use an airprint printer directly connected to wifi through it's own wifi card.
See here for info:
http://support.apple.com/kb/ht4356

Extend network AND connect via ethernet?

How do I configure Airport Express to extend my network wirelessly and connect a computer via Ethernet?
I have 2 buildings at my church I am in charge of getting this to work in. The office building has a wireless network, the sanctuary has no ethernet or wireless at all. I can get a good signal to an Airport Express I just purchased inside the sanctuary and I am using that to feed internet to the PowerMac G4 that doesnt seem to see the network from the Office area. I was told that this could also extend my wireless network to the other computers in the sanctuary. I have not been able to get this to happen.
I succesfully have it in "Join a Network" mode and it grabs the signal and gets internet to the G4. As soon as I change the mode to "Extend my network", I lose all connectivity with the network. In addition, no matter what mode I am in, I can't see this Airport from any devices wirelessly either in the utility or in the Airport browser.
So...how do I allow other machines/tablets/etc to use this airport to hook in to our network AND use the Ethernet line to feed the G4?
Thanks,
Joey

I am going from an Airport Extreme 4th gen (dual band) to an Airport Express 2nd gen (just replaced thanks to the Genius Bar, it used to be a 1st gen. single band) and then picking it up with another Express 2nd gen.
That.....is the problem.
I had understood from your initial post that you had an AirPort Extreme and wanted to extend to several AirPort Express devices.
Apple's "extend" setup works like the hub and spokes of a wheel. The AirPort Extreme would be the "hub" and the AirPort Expresses would reside at the end of the "spokes".
You can have multiple AirPort Express devices located at the ends of the spokes, but in order to "extend", each one of the them must connect directly to the "hub".....not to another extending device at the end of another spoke.
What you are trying to set up is a "hub", "relay" and "remote". Unfortunately, Apple's "extend" setup does not work this way.
The distant remote can pick up a signal from an Express at the end of a spoke acting as an extender, but the distant remote cannot "extend" the signal from an Express at the end of a spoke using wireless.
The distant remote is actually joining the network....that is why the Ethernet port is active....but unfortunately, there will be no wireless signal from this device.
Somewhere, an Express will need to connect back to the Extreme using a wired Ethernet connection. Then that Express can "extend" to another Express using wireless.

Extending network with Express via Ethernet(Complicated)

Hi all
I have an AirPort Extreme(Base Station). Now, I would like to extend my network by using an AirPort Express. To get a maximal signal, I've put an Ethernet-cable in the room where the Express will be placed. How do I have to install this Express now to be an extension of my current network without getting its connection wirelessly? The Express should get his connection from the Ethernet-cable which I put in the room.
Simplified: I want the Express to be some kind of a base station without creating a new network.
I think the solution might be making my two AirPorts both bridges, but this didn't work out so well when I tried this.
Thanks a lot to the one who can help me out!

Hello Momomo92094. Welcome to the Apple Discussions!
With the AirPort Express Base Station (AX) connected to the AirPort Extreme Base Station (AEBS) by Ethernet you only need to do the following:
o Reconfigure the AX as a bridge.
o Use the same Network Name (SSID) for both wireless networks.
o Use a radio channel on the AX that is at least 3 channels away from the one used on the AEBS.
o Use the same wireless encryption type and password on both devices.

HT4259 how to configure extended network via ethernet

how to configure an extended network via ethernet

I assume that the Express is new, so that it still has the factory default settings.
Connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the AirPort Express
Power up the Extreme and Express if they are not already powered up
Open Macintosh HD > Applications > Utiltities > AirPort Utility
Click on the tab in the upper left hand corner of the window that reads Other AirPort Base Stations (1)
Click on the AirPort Express xxxxxx
Wait a minute or two while AirPort Utility analyzes the network and then announces that the Express will be configured to extend your network
Enter a name for the AirPort Express and click Next
Wait 2-3 minutes while AirPort Utility configures the Express and the Express restarts
When you see the message that setup is complete, click Done
That's it.

I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydas

Ok... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. My question is I now wish to add a second Airport extreme but am considering a hard wire connecti

I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme. Can my network operate properly to extend the network with both a wireless and wired extend functionallity?

I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.
Excellent plan.
Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
Yes, but don't get confused about the second AirPort Extreme, as it would not be configured to "extend" a wireless network.....it would be configured to "create a wireless network" using the same wireless network name, security settings and password as the Time Capsule network. Configure the second Extreme in Bridge Mode.
This Apple support document will show you how to hookup and configure the second AirPort Extreme:
http://support.apple.com/kb/HT4260

HT2497 I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable. The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning

I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable. The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning great. The network name I assigned to the TC is also not appearing among available networks. How do I remedy this, please?

What OS on the computer you are using to setup the TC?
Did you turn on ipv6 for wireless to link-local... this is essential for network access now??
Try power cycling the network.. start up in correct order.. uverse.. 2min wait.. TC.. 2min wait.. computer.
No luck factory reset and start over. Use ethernet cable as well to the computer to help it.
No luck I can show you manual method.

Mac Pro no longer connects to network via ethernet.

Since coing back from Thanksgiving break and my Mac Pro 1,1 will no longer connect to my router through via ethernet. This means I can neither connect to internet nor connect to devices like my laptop and Apple TV. Strangely, I can still connect to my Mac Pro from these devices to share screen, play audio/video through iTunes, etc. In Network Settings, I still have a green dot, and I still get an IP address assigned (though I usually use a fixed IP). If I go into my router (Netgear WNDR4000), the router tells me that the Mac Pro 1,1 is connected to the network.
I already have tried the following solutions:
· Restarting router, modem, and computer
· Making a new location in Network Settings
· Trying different ethernet ports
Please Help!

Your local LAN runs through your router.
All your ethernet ports, and your modem and router, should be behind and filtered from excess current. That means a UPS generally. And run input line thru UPS (coax) first, then run RJ45 back through UPS again (there can still be excess surge or current on the line).
Modems and routers can be compromised by surge outage or storm. So can ethernet ports.
You have two ethernet ports and you tried with both also.
What you did not do that I would have added is SMC Reset / Reset NVRAM/PRAM.
This is what I have had for the last year, very nice and stronger signals thruout the house.
http://www.amazon.com/NETGEAR-Wireless-Router-Gigabit-R6200/dp/B008HO9DIG/

I have an HP LaserJet 8150N that I am trying to get connected via ethernet cable directly to my iMac. I always had this printer connected via a network so I don't know if I am able to connect directly with a cable since it is a network printer.

I have an HP LaserJet 8150N that I use for my work and I have had this printer for ever and it is one heck of a work horse! I am trying to get it connected via ethernet cable directly to my iMac. I always had this printer connected via a network so I don't know if I am able to connect directly with a cable since it is a network printer. I have tried to reconfigure the printer using the JetDirect menu giving it a new IP address but still no luck. If anyone could help me through this issue I would appreciate it.

moonlightcaravan wrote:
Second, seeing "connecting" and connection failed is normal. You must click on "Connect As" in the Finder window and then enter the username and password for the admin account on the other computer. That should fix things.
Thanks for responding.
When does clicking on "Connect As" happen in the process above?
After step six? Seven?
After the connection has failed?
Is this the FInder window that shows the icon of the computer you want to copy the file from?
You should see "Connect As" in the Finder near the top right of the window as shown below:
!http://blog.brothersoft.com/wp-content/uploads/2008/11/howto_copy_files_to_or_from_your_iphone02.jpg!

I'd like to alter my Airport Extreme/Airport Express wireless network so that the 3 Expresses connect to the Extreme via Ethernet. I've been told this will create a more stable wifi signal. How do I configure this using Airport Utility? Thanks.

I currently have an Airport Extreme Base Station connected to my DSL router by Ethernet. Because I have a long, sprawling home, I have 3 Airport Expresses configured to "Extend the Wireless Network" I've established. Because of my home environment--thick walls encompassaing wire mesh, sprawling rooms, etc., it is hard to maintain a continuously-strong, stable WiFi signal. I've been told that I can create a much more stable network by connecting the Express units to the AEBS via Ethernet cable. Since my home is already wired for Ethernet, I'm considering making this change. If I proceed to establish the Ethernet connections, how do I then set up Airport Utility to accomodate this switch from a Wireless-based WiFi network to an Ethernet-based WiFi network?
Thanks in advance for any help.
Phyllis

I don't see anyplace in the Utility to designate HOW the Express units are connected, only how they relate on the network to the Extreme,
As I mentioned in the previous post, when you click the Internet icon in AirPort Utility:
Connect Using = Ethernet (This tells each Express to connect to the Extreme using the ethernet connection)
Connection Sharing = Off (Bridge Mode) (This setting allows your AirPort Extreme to function as the "main" router on the network, as it must for the setup to work correctly.
You do not need to configure anything differently on the AirPort Extreme (as long as it is working correctly now) to connect the AirPort Express devices.
The only other question I have is the following: I'm currently already using one of the Ethernet ports on the back of the Extreme-- for my husband's iMac. I really don't think he gains much in performance over how the iMac would run through wifi, so I could disconnect the iMac. If you think the iMac would do better to stay on the Ethernet connection, should I use a switch/splitter to add an extra connection?
Since each AirPort Express must connect using ethernet, you will need to use the 3 LAN <-> ports on the AirPort Extreme for the AirPort Express devices.
I would suggest that you try connecting the iMac using wireless to see if that will work. If the wireless connection is not satisfactory, then you can add a 5 port ethernet switch to one of the LAN ports on the Extreme and then plug all the devices connecting using ethernet....the iMac and the 3 AirPort Express devices...into the remaining 4 ports on the switch. That will leave you with 2 open ports on the AirPort Extreme for any future devices that may need to connect.
When you test out the system, here is a trick to find out which device your computer is actually connecting to at any given time as it "roams" around the house.
When you have AirPort Utility open to configure each AirPort Express, jot down the AirPort ID for each Express. You can do the same for the AirPort Extreme.
As you move around with your laptop, hold down the option key on your Mac keyboard while you click on the fan shaped AirPort icon at the top of the screen. Look for the BSSID. That is the AirPort ID of the device that the laptop is connected to at that time. it should also be the ID of the closest AirPort Express (or AirPort Extreme if the laptop is close to the Extreme at the time).
Let us know how things are working when everything is up and running.

Can I add a NAS via ethernet to the Time Capsule network?

"I'm a PC," but am sick of spending all my time with Windows/Network conflicts and am getting ready to take the plunge into the Mac world (insert applause here).
My router/switch is old, and I want "n" wireless capability, so my plan here is to go whole hog and buy a Macbook Pro, an iMac, and a brand new network infrastructure including the 2TB Time Capsule. This way I will stay completely within the Apple family.
I have a Netgear ReadyNAS 2TB that I would like to have available as a second back-up drive on the network. It can only be on the network via ethernet (LAN). It cannot be plugged into the Time Capsule's USB port.
Will I be able to add this drive and get Time Capsule (and even Time Machine) to "play nice" with it? Can I even set the Time Machine on each computer to back up to this drive?
Or should I just sell the ReadyNAS and get a USB drive that will work with the time capsule?
Finally, there are only 3 ethernet ports on the TC. Can I add a switch?
Thanks for any help anyone can offer,
Shawn

BroncoCountry wrote:
Will I be able to add this [NAS] drive and get Time Capsule (and even Time Machine) to "play nice" with it? Can I even set the Time Machine on each computer to back up to this drive?
It's reasonable to expect your NAS drive to work when connected to your Time Capsule network. However, it will be difficult for you to use it for Time Machine backups. Apple only supports Time Machine network backups to the disk in a Time Capsule.
It's easy to have multiple computers backing up via Time Machine to the same Time Capsule.
Or should I just sell the ReadyNAS and get a USB drive that will work with the time capsule?
That's up to you. Keep in mind that Apple still doesn't want you to use that USB drive for Time Machine backups.
Finally, there are only 3 ethernet ports on the TC. Can I add a switch?
Yes.

Airport express won't extend network via ethernet but shows GREEN (HELP!!)

I have the following routers setup up the same network and are working.
10.0.1.1 Airport Extreme (connected to hardline from IP)
10.0.1.2 Time Capsule 1 (extending network and providing internet connection to computer via ethernet)
10.0.1.3 Time Capsule 2 (extending network and providing internet connection to Xbox1)
10.0.1.4 Airport Express 1 (extending network and providing internet connection to Xbox2)
Not working correctly
10.0.1.43 Airport Express 2 (wanting to set this router up to extend network to plug into desktop)
The router seems to join the network fine and will show GREEN but doesn't show a similar IP address as the rest of the routers. It also doesn't provide any internet connection via ethernet to any computer, the network pref page says that it shows RED and that nothing is connected to the computer for internet but airport shows GREEN.
Reset the router multiple times, tried every which way of setting it up and no go. I also tried assigning it a IP and not using DHCP and gave it a 10.0.1.5 and still the same outcome.
Right now just at complete loss as to what to try next.

Sorry, the older version of the Express does not have the option to "extend a wireless network", which is the setting on the new Express that provides more wireless coverage and also enables the Ethernet port.
What you want to do can be done with a different setting..."participate in a WDS network" on both the Time Capsule and Express, but I am not recommending that you do this because WDS operates only in "g" wireless mode. Your Time Capsule would lose most of its performance in this setting and the network would slow down tremendously...defintely not what you want for gaming.
You'll have the best performance if you connect the PS3 directly to one of the Ethernet ports on the Time Capsule using an Ethernet cable. If it is not possible to run the cable, the next best performance option would be to use a pair of Ethernet powerline adapters to send the Ethernet signal over the existing AC wiring in your home.

Need to print simultaneously via the network/TCP/IP & also print parallel from stand-alone PC

1. HP LaserJet 4200 Q2427A
2. Win7 - 32bit
3. When I print from the Networked PC (which is on same subnet as printer) Prints come out. No problems. Then I need to print from a PC( which is a standalone PC w/ no connection to the corporate LAN, but does have a separate DSL connection to the internet) connected via the parallel cable. Prints fine no problems. When I try to then go back to the networked PC and print, The job takes 10-15 minutes print if at all- which sometimes it does not print at all.
4. The stand-alone PC was replaced with a new windows 7 PC. The previous stand-alone PC was running windows XP. We did not experience any issues when PC was XP. PC was replaced due to Hard drive going bad and age. The windows 7 PC has a PCI parallel card installed for the parallel connection.
Have also tried using a parallel to usb adapter with same results.

That would be Wireless Distribution System (WDS). That is to say Wireless to Wireless. And if I recall correctly that option is not available to you.
Bridge Mode is bridging between ethernet and WiFi.
One way you could maybe do what you want without ethernet over powerline adaptors is to get an Airport Express (more money), attach that to the Pirelli via ethernet. Put the Express into Bridge Mode. Now have the Express provide the WDS server to the Airport Extreme Base Station. Of course you now have 3 WiFi transmiters in your home just so you can print something, but just think of the coverage in your home.
NOTE: If for some reason you decide to try this Express to AEBS WDS system, you can create a roaming network by giving all 3 WiFi systems the same SSID and password. When everyone is using the same SSID and password you can roam around the house and your laptops will automatically switch to the base station with the strongest signal (assuming that is worth something to you).

Have new Airport Extreme via ethernet cable from HughesNet Gen4 modem. Using NetGear WN3500RP extender. NetGear asks for different names for the 2.4 and 5 GHz bands. Most of what I have read indicats extender shoul have same name as main network?

Have new Airport Extreme conneted via ethernet cable from HughesNet Gen4 modem. Using NetGear WN3500RP extender. NetGear asks for different names for the 2.4 and 5 GHz bands. Most of what I have read indicates extender should have same name as main network? How is it best to configure with the Airport Extreme router 802.11ac?

Different names for the 2.4 and 5 GHz networks are optional, but can be convenient for you to distinguish one from another. It's up to you.

Macintosh SE Superdrive Networking TCP/IP via Ethernet

Similar Messages

Maybe you are looking for