MacJanitor question

I am on an old emac at a friend and when I run Mac Janitor, there is an endless series of lines like this:
30B88249EB0 4664 Thu Jun 21 18:22:54 paul@82-45-251->130.cable.ubr01.camd.blueyonder.co.uk
(host d.mx.mail.yahoo.com[216.39.53.2] refused to talk to me: 421 Message from (<Edited by: Host>) >temporarily deferred - 4.16.50. Please refer to http://help.yahoo.com/help/us/mail/defer/defer->06.html)
<Edited by: Host>
What are these and how do I get rid off them as there are more and more adding as time goes by.
All of them with different email addresses and numbers
Many thanks
Laurent
Emac 700Mhz

Hi Laurent,
IP address: 216.39.53.2
Host name: mta-v13.mail.vip.re4.yahoo.com
216.39.53.2 is from United States(US) in region North America
TraceRoute to 216.39.53.2 [mta-v13.mail.vip.re4.yahoo.com]
The other one is your IP I imagine, and for your safety I'll ask it be removed.
IP address: x.x.x.x
No host name is associated with this IP address or no reverse lookup is configured.
Error:Host not found
x.x.x.x is from United Kingdom(UK) in region Western Europe
Not sure, but some Mail isn't being sent.
Looks like somebody used your IP or ISP to send SPAM though...
Spam Blacklist check for <Edited by Host>:
whois.rfc-ignorant.org has not blacklisted this IP
bl.spamcop.net has not blacklisted this IP
sbl.spamhaus.org has not blacklisted this IP
xbl.spamhaus.org has not blacklisted this IP
zen.spamhaus.org has blacklisted this IP and the response is 127.0.0.11
psbl.surriel.com has not blacklisted this IP
Enter your x/x.x.x IP here...
http://www.spamhaus.org/zen/
Turns out they don't like your ISP...
http://www.spamhaus.org/pbl/query/PBL157232
It says you can remove it there.

Similar Messages

Spinning ball problems--need to do a clean install--have questions

Hi
background:
I have a G4 (quicksilver) since July 2002, it came with OS9.2 and OS10.1.3. I've upgraded a few times since and currently have 10.3.9. I mainly work in OS9.2 due to most of my programs being used are only in 9 and the PC network I'm hooked up to likes it better. I boot up in 9.2 -- 80%of the time.
I'm not sure when the problem started in OSX since I'm not working there alot but I started to get the spinning ball in installer, software update and some preferences. So I reloaded (archive/install) from 10.3.5 upgrade disk but couldn't further upgrade to 10.3.9 due to that spinning ball-- still there even after I reloaded 10.3.5.
I've run Disk Utility from the 10.3.5 upgrade disk (repaired disk, repaired permissions) and then I again reloaded (archive install) 10.3.5 and then upgraded to 10.3.9 and this time it worked because I went immediately to the 10.3.9 to install.
BUT I still have the spinning balls in almost everything. Almost seems worse now. I can't even use Disk Utility from the utility folder on my mac without getting the spinning ball.
OS9.2 is fine and I would like to leave it that way.
But it's looking like I need to do a clean install--which means I'll have to reload OS9.2 -- correct?
My question is for a clean install do I need to go back to the original disks that came with my Mac (OS10.1.3) or can I do a clean install with the 10.3.5 upgrade disks. And if I do a clean install from 10.3.5 can I still install OS9.2?
Also what are those Software Restore disks for? They came with the original set of CDs, are they used in the clean install?
Thanks for any help you can give
Power Mac G4 (quicksilver) Mac OS X (10.3.9)
G4 quicksilver Mac OS X (10.3.9)

Keith:
Welcome to Apple Discussions.
You really should start a new topic, as threadjacking is frowned upon in these Forums.
The spinning ball or the beachball effect is a result of the computer spinning its wheels, so to speak, as it does not have sufficient computing power to deal with the task at hand. This can be caused by many things.
I am almost certain that it has nothing to do with the latest Panther update. I did them all with no problem.
Is there a way to deal with it?
1. Sufficient RAM
2. Sufficient available HDD capacity.
3. Regular maintenance.
4. Repairing Disk Permisssions before and after any installations.
In terms of RAM you should aim to max out your RAM if you can. I don't have much information on your computer specs so I can't give any more specific information about that.
You should have 10 to 15 percent of your internal HDD as free space. This gives your computer room for virtual memory to be most efficient.
Here is an article on maintenace that has good advice and links to resources: http://discussions.apple.com/thread.jspa?messageID=607640&#607640
In addition to repairing permissions, another simple procedure is to reset the PRAM. You should boot from your install disk and run Repair Disk from Disk Utility on the install disk. I run monthly diagnostics and repairs with Tech Tool Pro or Disk Warrior. In addition running regular CRON cleaning with a utility like MacJanitor, Cocktail, Macaroni or Onyx (all linked in the article above) keeps your machine running smoothly and minimizes the potential for major problems.
I think I have given you enough to chew on for now. Post back if you have further questions.
Good luck.
cornelius

MacJanitor - apps to clean up my system

Hi,
Before I used an app called MacJanitor, which cleaned up my system my iBook wasn't left on continuously. Since installing Leopard I have tried using it and it doesn't seem to be doing much - pretty much saying "Done" as soon as I run it. I wasn't sure if this was something to do with Leopard i.e. MacJanitor doesn't work with it? Alternatively, does anyone know of a similar app that work with Leopard?
Thanks in advance.

Thank you Yann.
I read your link to A Brody's warning about corrupted cache files -
http://discussions.apple.com/thread.jspa?threadID=1322708&tstart=0
On my new iMac I installed The Sims 2.
Now my iMac behaves in all sorts of weird manners. For instance:
+i) Input and dialogue boxes now have a dark border line around them when clicked on;+
+ii) clicking on folders, opening windows and all other mouse actions now have amusing sound effects attached to them (I assume they came from the Sims 2 game);+
+iii) the 'Apple Menu' of my intel 24" 2.8ghz iMac now displays two versions of each option Sleep, Restart and Shutdown (with the Keyboard shortcut displayed for each being different and distinct - which is itself odd) amongst others. Open, Close etc. are ok, just the one as normal.+
I followed the game producer's detailed instructions to remove all items I could find associated with The Sims 2 (they told me what to look for) and trash everything. Annoyingly the problem nevertheless persists.
I read this thread because I thought of using MacJanitor to clear my cache files +(I turn all electrical stuff off at night)+ as a possible way to solve my problem. After reading *a brody*'s comments I now wonder if my own problems could be due to a corrupted cache file instead.
The reason I say this is because it only occurs in one of my four 'User Accounts', and not in my Administrator's Account.
The User account in question was 'migrated' from my eMac which has been suffering from kernel panics and has been down now for some time with me scratching my head in desperation.
I'm beginning to think that it was a mistake to migrate all my eMacs settings over to my new iMac.
Assuming all this being the case, I wonder if running Disk Warrior (or TechTool Pro 4) to fix the corrupted system cache files would work, especially as the most severe problems have occurred since installing The Sims 2 game.
I am assuming of course there is a version of these programmes available for my operating system - OSX 10.5.1 - Leopard. Both programmes resurrected my eMac to get it going but the kernal panics return nevertheless and the fault with this persist. However if a corrupted cache file is the cause not just a symptom I may be able to kill two birds with one stone!
WHAT HAPPENS IF ONE DELETES THE OFFENDING USER ACCOUNT. Can this be done? If so, what is the best way to do this to avoid data loss?
Message was edited by: El Deanio

DU differs over permissions after using Macjanitor

Thanks Sig and others for help. I do prefer to run a non-automated maintenance program like MacJanitor because I shut down the computer at the end of the day (it's also only 144 kb). If it isn't doing any harm I'd prefer to keep using it, even if it differs with DU permissions. I've copied part of the thread which contains my unanswered question which seems to have gotten lost amid the responses to Jorge's posting (and now buried by a flurry of newer postings) . I've copied the relevant part of the thread here.
Also are there any other, perhaps more up to date programs, which can be run manually? Thanks.
"DU differs over permissions after using Macjanitor
Posted: Mar 29, 2008 12:39 PM
Reply Email
I recently started using Macjanitor ("run all tasks"). When I've done this - several times now - and then run Permissions Repair, I get:
Permissions differ on ./private/var/log/secure.log, should be -rw------- , they are -rw-r-----
Owner and group corrected on ./private/var/log/secure.log
Permissions corrected on ./private/var/log/secure.log
Is Macjanitor creating a problem? DU restores the correct permissions afterward. Should I stop running Macjanitor? (I like to use it because it is non-automated). Thanks for help.
Imac G3/ 400 (early 2001) Mac OS X (10.4.11)
sig
Posts: 4,306
Registered: Sep 22, 2000
Re: DU differs over permissions after using Macjanitor
Posted: Mar 29, 2008 12:58 PM in response to: WZZZ
Reply Email
Yes that's perfectly normal and is what should happen. MacJanitor runs the cron scripts manually. You get the same result if you let your Mac run Friday night into Saturday. No problem.
MacBook Pro 2.4 Ghz 15.4 / 2 Gb Ram Mac OS X (10.4.11)
(UNANSWERED QUESTION)
Thanks for quick reply.
So, does that mean I shouldn't bother repairing permissions with DU after using Macjanitor?"

So, does that mean I shouldn't bother repairing permissions with DU after using Macjanitor?"
Yes, you needn't bother repairing permissions after using MacJanitor. But I still recommend using something different. If you must do this manually (I really don't see a reason why) then use one of the more current utilities such as TinkerTool System, Onyx, CockTail, etc.
Although what happens with MacJanitor is innocuous, it's one of those items that shows that MacJanitor needs some revision, but the program seems to have long been abandoned by its author. I used it for a while, but by the time Tiger appeared it was completely unreliable on my systems, so I stopped using it. Since then I use Macaroni (shareware) but if it's $9.00 price tag is too high PseudoAnacron is freeware. Either completely automates the process by checking if the scripts have been run since the last time the computer was shut down. If not then they run the appropriate script. This assures the maintenance is performed whether your computer is turned off or left on. The choice is yours. I prefer not having to remember to run maintenance scripts.

IMac G5 and MacJanitor

I'm helping a friend "tidy" an iMac which is put to sleep overnight, so I suggested using MacJanitor. The weekly task took about 20 minutes to complete and gave the message
Rebuilding whatis database:
find: /usr/local/man: No such file or directory
Is this a fault?

Found a forum that answered your question: The error ...
"find: /usr/local/man: No such file or directory"
is harmless and always appears in the weekly script log. Your "locate" and "find" commands will work properly and you can ignore it. That "error" has been appearing in my iMac G5 (PPC) and MacBook Pro (C2D, Intel) weekly logs since they were freshly brand new.
The login accounting error means you won't see a listing in the monthly log file that shows what users logged in and for how long. And the wtmp error means that the script could not find wtmp in the /var/log directory. wtmp keeps track of users and their logins, so it's related to the login accounting error. Have you deleted that file?
The only true error you are seeing here has to do with the login accounting file wtmp (or the fact that it apparently isn't in your system where it belongs). Nonetheless, I doubt this is a serious problem. But it might be indicative of you or someone else moving or deleting files that might be best left alone.
Ray

Questions on Print Quote report

Hi,
I'm fairly new to Oracle Quoting and trying to get familiar with it. I have a few questions and would appreciate if anyone answers them
1) We have a requirement to customize the Print Quote report. I searched these forums and found that this report can be defined either as a XML Publisher report or an Oracle Reports report depending on a profile option. Can you please let me know what the name of the profile option is?
2) When I select the 'Print Quote' option from the Actions drop down in the quoting page and click Submit I get the report printed and see the following URL in my browser.
http://<host>:<port>/dev60cgi/rwcgi60?PROJ03_APPS+report=/proj3/app/appltop/aso/11.5.0/reports/US/ASOPQTEL.rdf+DESTYPE=CACHE+P_TCK_ID=23731428+P_EXECUTABLE=N+P_SHOW_CHARGES=N+P_SHOW_CATG_TOT=N+P_SHOW_PRICE_ADJ=Y+P_SESSION_ID=c-RAuP8LOvdnv30grRzKqUQs:S+P_SHOW_HDR_ATTACH=N+P_SHOW_LINE_ATTACH=N+P_SHOW_HDR_SALESUPP=N+P_SHOW_LN_SALESUPP=N+TOLERANCE=0+DESFORMAT=RTF+DESNAME=Quote.rtf
Does it mean that the profile in our case is set to call the rdf since it has reference to ASOPQTEL.rdf in the above url?
3) When you click on submit button do we have something like this in the jsp code: On click call ASOPQTEL.rdf. Is the report called using a concurrent program? I want to know how the report is getting invoked?
4) If we want to customize the jsp pages can you please let me know the steps involved in making the customizations and testing them.
Thanks and Appreciate your patience
-PC

1) We have a requirement to customize the Print Quote report. I searched these forums and found that this report can be defined either as a XML Publisher report or an Oracle Reports report depending on a profile option. Can you please let me know what the name of the profile option is?
I think I posted it in one of the threads2) When I select the 'Print Quote' option from the Actions drop down in the quoting page and click Submit I get the report printed and see the following URL in my browser.
http://<host>:<port>/dev60cgi/rwcgi60?PROJ03_APPS+report=/proj3/app/appltop/aso/11.5.0/reports/US/ASOPQTEL.rdf+DESTYPE=CACHE+P_TCK_ID=23731428+P_EXECUTABLE=N+P_SHOW_CHARGES=N+P_SHOW_CATG_TOT=N+P_SHOW_PRICE_ADJ=Y+P_SESSION_ID=c-RAuP8LOvdnv30grRzKqUQs:S+P_SHOW_HDR_ATTACH=N+P_SHOW_LINE_ATTACH=N+P_SHOW_HDR_SALESUPP=N+P_SHOW_LN_SALESUPP=N+TOLERANCE=0+DESFORMAT=RTF+DESNAME=Quote.rtf
Does it mean that the profile in our case is set to call the rdf since it has reference to ASOPQTEL.rdf in the above url?
Yes, your understanding is correct.3) When you click on submit button do we have something like this in the jsp code: On click call ASOPQTEL.rdf. Is the report called using a concurrent program? I want to know how the report is getting invoked?
No, there is no conc program getting called, you can directly call a report in a browser window, Oracle reports server will execute the report and send the HTTP response to the browser.4) If we want to customize the jsp pages can you please let me know the steps involved in making the customizations and testing them.
This is detailed in many threads.Thanks
Tapash

Satellite P300D-10v - Question about warranty

HI EVERYBODY
I have these overheating problems with my laptop Satellite P300D-10v.
I did everything I could do to fix it without any success..
I get the latest update of the bios from Toshiba. I cleaned my lap with compressed air first and then disassembled it all and cleaned it better.(it was really clean insight though...)
BUT unfortunately the problem still exists...
So i made a research on the internet and I found out that most of Toshiba owners have the same exactly problem with their laptop.
Well i guess this is a Toshiba bug for many years now.
Its a really nice lap, cool sound (the best in laptop ever) BUT......
So I wanted to make a question. As i am still under warranty, can i return this laptop and get my money back or change it with a different one????
If any body knows PLS let me know.
chears
Thanks in advance

Hi
I have already found you other threads.
Regarding the warranty question;
If there is something wrong with the hardware then the ASP in your country should be able to help you.
The warranty should cover every reparation or replacement.
But I read that you have disasembled the laptop at your own hand... hmmm if you have disasembled the notebook then your warrany is not valid anymore :(
I think this should be clear for you that you can lose the warrany if you disasemble the laptop!
By the way: you have to speak with the notebook dealer where you have purchased this notebook if you want to return the notebook
The Toshiba ASP can repair and fix the notebook but you will not get money from ASP.
Greets

Question regarding NULL and forms

Hi all, i have a survey that im working on that will be sent via email.
I'm having an issue though. if i have a multiple choice question, and the user only selects one of the choices, all the unselected choices return as NULL. is there a way i can filter out anytihng that says "NULL" so it only shows the selected options?
thanks.
here is the page that retrieves all the data. thanks
<body>
1) Is this your first visit to xxxxxxx? <%=request.getParameter("stepone") %>

 
2) How did You Learn About xxxxxxx?
<%=request.getParameter("steptwoOne") %>
 
 <%=request.getParameter("steptwoTwo") %>
 
 <%=request.getParameter("steptwoThree") %>
 
 <%=request.getParameter("steptwoFour") %>
 
 <%=request.getParameter("steptwoOther") %>

 
3) What was your main reason for visiting xxxxx?
<%=request.getParameter("stepthreeOne") %>
 
 <%=request.getParameter("stepthreeTwo") %>
 
 <%=request.getParameter("stepthreeThree") %>
 
 <%=request.getParameter("stepthreeFour") %>
 
 <%=request.getParameter("stepthreeOther") %>

4) did you find the information you were looking for on this site?
<%=request.getParameter("stepfour") %>
 
<%=request.getParameter("stepfourOther") %>

5) Do you plan on using this website in the future?
<%=request.getParameter("stepfive") %>
6) What is your gender
<%=request.getParameter("stepsix") %>
7) What is your age group
<%=request.getParameter("stepseven") %>
8) Would you like to take a moment and tell us how we can improve your experience on xxxxxxxxxx?
<%=request.getParameter("stepeightFeedback") %>

i was messing around and came up with this. it doesnt remove the null, but if it is null it adds ABC beside it. so i think i might be getting close. i just need to figure out how to replace the null.
code]
<%=request.getParameter("steptwoFour") %>
 <% if (request.getParameter("steptwoFour") == null ) {
 %>
 <% out.print("abc"); %>
 <% }
 %>

Anyone know how to remove Overdrive books from my iphone that have been transferred from my computer? They do not show up on itunes. I see a lot of answers to this question but they all are based on being able to see the books in iTunes.

How do I remove Overdrive books from the library that were downloaded onto my computer then transferred to my iphone? The problem is that they do not show up in iTunes.
I see this question asked a lot when I google, but they always give answers that assumes you can find the books in iTunes either under the books tab, or the audio books tab or in the music. They do not show up anywhere for me. They do not remove from the app like the ones I downloaded directly onto my iphone.the related archived article does not answer it either. I even asked a guy working at an apple store and he could not help either. Anybody...?
Thanks!

there is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory

Basic question

Hello, i have a basic question. if i have defined 2 fields in a cube or a dso:
Name Quantity
and from the external flat file i get some characters for my quantity field. would my load fail? for standard dso and for write optimized?
NOTE: quantity field is a keyfigure defined as numeric.
and the load coming in has "VIKPATEL" for Quantity field and not numbers.
thanks

Hi Vik,
Yes, the load will fail.
May be you coud first load this data into BW (into PSA) and set both fields as characters fields. Then you can create DSO, do transformation from this PSA to the DSO, and put your logic as to what do you want to do with those Quantity that is not number (e.g. convert to 0, or 'Not assgined', etc).
You can use transfer rule, or a clean up ABAP code in the start routine.
Hope this helps.

Mid 2010 15" i5 Battery Calibration Questions

Hi, I have a mid 2010 15" MacBook Pro 2.4GHz i5.
Question 1: I didn't calibrate my battery when I first got my MacBook Pro (it didn't say in the manual that I had to). I've had it for about a month and am doing a calibration today, is that okay? I hope I haven't damaged my battery? The calibration is only to help the battery meter provide an accurate reading of how much life it has remaining, right?
Question 2: After reading Apple's calibration guide, I decided to set the MacBook Pro to never go to sleep (in Energy Saver System Preference) and leave it on overnight so it would run out of power and go to sleep, then I'd leave it in that state for at least 5 hours before charging it. When I woke up, the light on the front wasn't illuminated. It usually pulsates when in Sleep. Expectedly, it wouldn't wake when pressing buttons on the keyboard. So, what's happened? Is this Safe Sleep? I didn't see any "Your Mac is on reserve battery and will shut down" dialogues or anything similar, as I was asleep! I've left it in this state while I'm at work and will charge it this afternoon. Was my described method okay for calibration or should I have done something different?
Question 3: Does it matter how quickly you drain your battery when doing a calibration? i.e is it okay to drain it quickly (by running HD video, Photo Booth with effects etc) or slowly (by leaving it idle or running light apps)?
Thanks.
Message was edited by: Fresh J

Fresh J:
A1. You're fine calibrating the battery now. You might have gotten more accurate readings during the first month if you'd done it sooner, but no harm has been done.
A2. Your machine has NOT shut down; it has done exactly what it was supposed to do. When the power became critically low, it first wrote the contents of RAM to the hard drive, then went to sleep. When the battery was completely drained some time later, the MBP went into hibernation and the slepp light stopped pulsing and turned off. In that state the machine was using no power at all, but the contents of your RAM were still saved. Once the AC adapter was connected, a press of the power button would cause those contents to be reloaded, and the machine would pick up again exactly where you left off. It is not necessary to wait for the battery to be fully charged before using the machine on AC power, but do leave the AC adapter connected for at least two hours after the battery is fully charged. Nothing that you say you've done was wrong, and nothing that you say has happened was wrong.
A3. No, it does not matter.

Jabber/WebEx Connect SSO Questions

I've got a few questions around exactly what needs to be done to get SAML working for our Connect accounts to successfully authenticate from Jabber for Windows, Mac, iPhone, and Android.
We have both a Meeting Center and Connect account under WebEx using Loose Coupled Integration. Just this past week I enabled SAML for our Meeting Center accounts which went off without a hitch with the exception of Meeting Center integration with Jabber, which is now broken with a message about SSO enabled Meeting Sites not being supported (I think this would maybe be fixed if we had Tight Coupled Integration with our two account?).
Anyway, my questions are...
For Windows, I understand all clients will need to be reinstalled with the MSI argument for the SSO_ORG_DOMAIN switch I've read about, is that correct? Are there any other switches needed for the reinstall?
How will this work with the Mac and mobile clients? There's obviously no command line options to specify for the installations here, will they just know to kick over to my IdP for authentication once they see an email address that falls under an org with SSO enabled? If so, why does the Windows client need to be completely reinstalled and not just know to find the IdP from the Cloud Connect service like Meeting Center does with the Productivity Tools?
We're just doing this for our Connect Web IM accounts, not attempting any sort of SSO with the phone accounts/UC integration yet.
Any ideas on getting the Meeting Center integration into Jabber working again?

I'd suggest posting your question over on the Jabber Pilot forum, as this forum is specific to Jabber Guest questions:
https://supportforums.cisco.com/community/4551/jabber-pilot-support
-jim

My iPad wont let me download apps bc security questions, but when I try to make them it freezes

Every time I try to download an app it tells me I need to update my security questions, but once I click to make the questions the box goes white. So I'm not sure how to fix it

The new questions show on your account on http://appleid.apple.com ? If they do then try logging out and back into your account on your phone (assuming that is where you are trying to purchase from) and see if the new questions then show on it.

ASA VPN QUESTION

Hi All
The question is pretty simple. I can successfully connect to my ASA 5505 firewall via cisco vpn client 64 bit , i can ping any ip address on the LAN behind ASA but none of the LAN computers can see or ping the IP Address which is assigned to my vpn client from the ASA VPN Pool.
The LAN behind ASA is 192.168.0.0 and the VPN Pool for the cisco vpn client is 192.168.30.0
I would appreciate some help pls
Here is the config:
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password J7NxNd4NtVydfOsB encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.0.11 EXCHANGE
name x.x.x.x WAN
name 192.168.30.0 VPN_POOL2
interface Vlan1
nameif inside
security-level 100
ip address 192.168.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address WAN 255.255.255.252
interface Ethernet0/0
switchport access vlan 2
<--- More --->
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
boot system disk0:/asa724-k8.bin
ftp mode passive
clock timezone EEST 2
clock summer-time EEDT recurring last Sun Mar 3:00 last Sun Oct 4:00
dns server-group DefaultDNS
domain-name default.domain.invalid
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
access-list nk-acl extended permit tcp any interface outside eq smtp
access-list nk-acl extended permit tcp any interface outside eq https
access-list customerVPN_splitTunnelAcl standard permit 192.168.0.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 VPN_POOL2 255.255.255.0
access-list inside_access_in extended permit ip any any
access-list VPN_NAT extended permit ip VPN_POOL2 255.255.255.0 192.168.0.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool VPN_POOL2 192.168.30.10-192.168.30.90 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (inside) 10 interface
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
nat (outside) 10 access-list VPN_NAT outside
static (inside,outside) tcp interface smtp EXCHANGE smtp netmask 255.255.255.255
static (inside,outside) tcp interface https EXCHANGE https netmask 255.255.255.255
access-group inside_access_in in interface inside
access-group nk-acl in interface outside
route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
aaa authorization command LOCAL
http server enable
http 192.168.0.0 255.255.255.0 inside
snmp-server host inside 192.168.0.16 community public
no snmp-server location
no snmp-server contact
snmp-server community public
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs group1
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 20
telnet 192.168.0.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcp-client client-id interface outside
dhcpd dns 217.27.32.196
dhcpd address 192.168.0.100-192.168.0.200 inside
dhcpd dns 192.168.0.10 interface inside
dhcpd enable inside
group-policy DfltGrpPolicy attributes
banner none
wins-server none
dns-server none
dhcp-network-scope none
vpn-access-hours none
vpn-simultaneous-logins 3
vpn-idle-timeout 30
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec l2tp-ipsec
password-storage disable
ip-comp disable
re-xauth disable
group-lock none
pfs disable
ipsec-udp disable
ipsec-udp-port 10000
split-tunnel-policy tunnelall
split-tunnel-network-list none
default-domain none
split-dns none
intercept-dhcp 255.255.255.255 disable
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout 30
ip-phone-bypass disable
leap-bypass disable
nem disable
backup-servers keep-client-config
msie-proxy server none
msie-proxy method no-modify
msie-proxy except-list none
msie-proxy local-bypass disable
nac disable
nac-sq-period 300
nac-reval-period 36000
nac-default-acl none
address-pools none
smartcard-removal-disconnect enable
client-firewall none
client-access-rule none
webvpn
functions url-entry
html-content-filter none
homepage none
keep-alive-ignore 4
http-comp gzip
filter none
url-list none
customization value DfltCustomization
port-forward none
port-forward-name value Application Access
sso-server none
svc none
svc keep-installer installed
svc keepalive none
svc rekey time none
svc rekey method none
svc dpd-interval client none
svc dpd-interval gateway none
svc compression deflate
group-policy customerVPN internal
group-policy customerVPN attributes
dns-server value 192.168.0.10
vpn-tunnel-protocol IPSec
password-storage enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value customerVPN_splitTunnelAcl
default-domain value customer.local
username xxx password 8SYsAcRU4s6DpQP1 encrypted privilege 0
username xxx attributes
vpn-group-policy TUNNEL1
username xxx password C6M4Xy7t0VOLU3bS encrypted privilege 0
username xxx attributes
vpn-group-policy PAPAGROUP
username xxx password RU2zcsRqQAwCkglQ encrypted privilege 0
username xxx attributes
vpn-group-policy customerVPN
username xxx password zfP8z5lE6WK/sSjY encrypted privilege 15
tunnel-group customerVPN type ipsec-ra
tunnel-group customerVPN general-attributes
address-pool VPN_POOL2
default-group-policy customerVPN
tunnel-group customerVPN ipsec-attributes
pre-shared-key *
tunnel-group-map default-group DefaultL2LGroup
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:a4dfbb82008f78756fe4c7d029871ec1
: end
ciscoasa#

Well lots of new features have been hinted at for ASA 9.2 but I've not seen anything as far as an Engineering Commit or Customer Commit for that feature.
Site-site VPN in multiple context mode was added in 9.0(1) and I have customers have been asking for the remote access features as well.
I will remember to ask about that at Cisco Live next month.

New to Apple, questions about using Windows, and other things

Hello all,
Today is my first day as an Apple owner. It's funny because I'm also a MCSE, MCSA, and MCP.
I purchased a 24" iMac, 2.8GHz, 4GB RAM, and 1TB Hard Drive.
I want to use Windows on my Mac so that I don't have to keep switching over to my PC. My main reason for using Windows is so that I can continue to enjoy my PC Games... mostly racing and D&D games.
So my question is... how does Windows run on bootcamp? Can I still use all of my USB controllers (like my steering wheels, joysticks, etc?)
I really havent even turned on my iMac... been too amazed at just looking at it for the first day (and also rearranging my home office).
I really just want to know from those of you who have PCs AND Macs, if you still find yourself having to go back to your PC because of incompatibilities or performance issues on the iMac?

Using BootCamp, your Windows experience is no different than if running it on a similarly configured PC. If you went with a VM running under Mac OS X (like VMWare or Parallels), there are a number of differences. However, using BootCamp you have a Mac-branded PC.
I'd point out that people have been dual-booting operating systems in this fashion for decades. Windows has no obvious in-built support for doing so, but other operating systems (like Linux, FreeBSD, etc.) have always very clearly and explicitly supported dual-booting (on Macs and regular PCs) from the get go.

MacJanitor question

Similar Messages

Maybe you are looking for