Mackbook Pro hookup w/ Clear plastic Apple Cinema Display

Have a 17" MBP and a 22" LCD clear plastic ACD. What adapter do I use to make the connection?
Can't seem to find the right one at the Apple store.
Thanks

<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=98 F46C6F&fnode=home/shopmac/macaccessories/displays&nplm=M8661LL/B>

Similar Messages

Mac Pro and dual 24" LED Apple Cinema Displays

I really want to upgrade my current 22" cinema display to the 24" LED, but as far as know there is no way currently to do so.
Does anyone know how to make it happen? Is there an adapter or do I need a new video card? It has to be possible right?

Hi,
the Mini-DisplayPort Apple uses on the MacBook, MacBook Pros and the 24" ACD is a minituarized version of the 'full' DisplayPort and is also a proprietary version currently not used by other manufacturers.
See here: http://en.wikipedia.org/wiki/AppleCinemaDisplay
Might be only a matter of time for such an adapter to come out.
(At least I hope so myself, since the ACD looks really good )
Regards
Stefan

Using only an Apple Cinema Display connected to MBP (w/ the lid closed)

Hi,
Could someone please help me on a small but rather annoying problem?
I have a Mac Book Pro 17" connected to an Apple Cinema Display 24". All I would like to do is to just use the Cinema Display, close the laptop lid, and for the MBP not to go into sleep mode (taking the Apple Display away with it).
I've looked in the Display and Energy Saver settings and have trawled through the online forums but as yet have not had any luck.
Can someone point me in the right direction?
Many thanks, M>/.

Apple supports using an external keyboard/mouse to wake the MBP in clamshell mode.
http://support.apple.com/kb/HT3131
The other option is 3rd party software to disable lid-closed sleep:
InsomniaX
SleepLess

How can I run a 27" Apple Cinema Display and another monitor from my MacBook Pro?

Hi everyone,
I recently purchased a brand new 15" MacBook Pro to replace my old one. I was told when ordering it that I would be able to hook up two external monitors to it using the Matrox DualHead2Go hardware. So, I also bought a 27" Cinema Display (non-Thunderbolt since it wouldn't work with the DH2Go). However, when I contacted Matrox they said their products don't support screens as large as the 27" ACD.
Bummer!
So, my question is: does anyone know how I can hookup a 27" Apple Cinema Display at 2560x1440 and a Acer 22" monitor at 1685x1050 (or, anything less really) to my new MacBook Pro?
I've looked around and haven't been able to find a good answer.
Thanks for your help!

Will something like this work? A USB to VGA adapter? Can I use this at the same time that I have a Cinema Display plugged into the Mini-DVI port and will they both work at the same time? Anyone know?
http://www.amazon.com/StarTech-Monitor-External-Adapter-USB2VGAE2/dp/B002FJQXXC/ ref=sr_1_2?s=electronics&ie=UTF8&qid=1329870330&sr=1-2

No video on Mac Pro 266 + 20" Apple Cinema Display + ADC to DVI Adapter

When I boot my Mac Pro, I don't get a video signal. I currently have a 20" Apple Cinema Display (clear case) connected via an ADC to DVI adapter. I have connected the monitor/adapter on a Powerbook G4 wihout any issues, which rules out the monitor. I've tried everything: resetting PRAM/NVRAM, motherboard reset button, unplugging everything...nothing works.
Any help would be greatly appreciated!

Are you guys using the ADC to DVI adapter or the DVI to ADC adapter?
I have a clear 23" cinema display and I was thinking of getting a new Mac Pro... From what I can tell, you need the DVI to ADC adapter that sells for $100+. Is that correct?

What do I need to connect my apple cinema display to new macbook pro

what do I need to connect my apple cinema display to new macbook pro?

2011 macbook pro with TB -> apple 27" Cinima Display with mini-displayport
Does this work natively? Is there an adapter or workaround?
No, not until or if an adaptor becomes available. See this thread.
Apple display and Thunderbolt compatibility

How do i connect my Fujitsu Tablet + mac Pro to Apple Cinema Display 23'?

Dear Mac users
thanks in advance for your help.
I currently own:
• Fujitsu T 4220 (tablet) – Mobile Intel 965 Express – 60 Hertz – goes up to 1680*1050 (guess SXGA) – (it has the following other supported resolutions: 1400*1050, 1280*1024, 1280*768, 1280*720, 1024*768, and 800*600)
• Mac Pro
• Apple Cinema Display 23’
What I would like to do is, please refer to the jpeg posted on http://www.flickr.com/photos/34831802@N06/3234336204/, connect – at the same time – my tablet pc and my Mac Pro to the 23' Apple Cinema Display and switch (when I need) from tablet to MacPro using the same 23’ ACD. Top would be to be able to switch for one to the other while they’re both switched on. Usually on 2 pc’s with vga I’d use a switch A → B (in the jpeg it would be I → E) with a selector.
Have been reading different posts such as: http://discussions.apple.com/thread.jspa?messageID=8000641&#8000641 or http://discussions.apple.com/thread.jspa?messageID=6530475&#6530475 or
http://discussions.apple.com/thread.jspa?messageID=7417258&#7417258
+ others on the net and have (hopefully) understood that:
a) from Vga to Dvi I need a converter such as Geffen’s or similar
b) the problem with ACD 23’ is that it has only 3 resolutions: 1024*640, 1280*800 or 1920*1200
In the attached image I guessed a connection in order to connect – at the same time – both the machines to the 23’ ACD:
1) my fujitsu tablet (i in the image) has to be connected, with a Vga cable (h), to the Vga → Dvi converter (g).
2) from the Vga → Dvi converter (g) I need to connecto to the Dvi switch (c)
3) easier is connecting the Mac Pro (e), since I only need a Dvi cable (d) to connecto to the Dvi switch (c)
4) the Dvi switch (c) will then be connected to the 23’ ACD with a Dvi cable
Now, my questions are:
a) is the solution described above (Vga cable (h) to the Vga → Dvi converter (g)) a good solution or should I use, instead, a docking statione that comes with a Fujitsu Port Replicator (FPCPR65) which has a 1 x DVI-D port?
b) Given the 3 resolution accepted by the 23’ ACD (1024*640, 1280*800 or 1920*1200), I do not understand if I can use my tablet through a Vga to Dvi Converter and at which resolution (my tablet has the following other supported resolutions: 1680*1050, 1400*1050, 1280*1024, 1280*768, 1280*720, 1024*768, and 800*600).
c) Is there a way, also using an external video card or converter, to bring my resolution from 1680*1050 to 1920*1200? (the 16:10 ratio is in fact the same = WXGA (1280x800), WXGA+ (1440x900), WSXGA+ (1680x1050), WUXGA (1920x1200)
d) Talking about Vga → Dvi converter (g), am aware of the gefen product. Can you please list some others that might be good as well?
e) And how about the DVI switch? Any will work? Any particular suggestion?
Thank you very much for your help.
If you have any other suggestion, please let me know.
Regards,
Emil

Noone to help me?
No ideas?
Thanks,
Emil

Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278. I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!

Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278. I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!
im not sure what to do next - can anyone help?
im running OSX 10.7.4

Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks.

How do i connect apple cinema display a1082 to my new macbook pro

I have a macbook pro intel core duo2 and i'm trying to connect my apple cinema display a1092 to my computer, there is an adapter available, but it does not seem to address the fireware cable coming out of my cinema display

the apple display that i see online has a mag safe, usb and mini display port...connect all three to your laptop so you can charge your laptop as you use the display as well as use the USB ports on the back of the monitor.. i didnt see anything about firewire...

Macbook Pro no longer support Apple Cinema Display after graphic update 1.0

I recently updated my system to ver. 10.5.2 and after that I updated to graphic system 1.0. After that my macbook pro began to have several problems dealing with my 23" Apple Cinema Display.
1- if started in 'closed lid' mode it gives me a kernel panic (shaded screen) error during start up
2- if started in 'open lid' mode it boots fine but whether i decide to close the lid it fails to wake from sleep mode. It starts for one or two seconds and then it gets back to sleep.
So, I made a long time taking test during the weekend and after several "archive and install" I found that this issue is related to the leopard graphic system update 1.0. Somehow this update mess up the way that macbook pro deals with my Apple Cinema Display.
I hope that someone at Apple will address this issue toward a solution in a short time.
I appreciate any other experience in this sense by anybody.
Thank you for any reply.

DGarrett wrote:
Virgin,
Check out the 'Apple Displays' forum and you'll find that you are not alone. MBP/Cinema Display relationship broken since graphics updater. Hopefully an Apple patch soon, or it's time for an Archive and Install w/o updating the graphics.
Best,
DG
Here is the direct link to the Cinema Display forum:
http://discussions.apple.com/forum.jspa?forumID=981

HT4293 i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html>

2008 Mac Pro and Apple Cinema Display 27"

Is there some sort of adapter that would allow me to plug the new Apple Cinema Display 27" with a 2008 Mac Pro? Or what change would I have to make to be able to work this out?

Adrian - did you end up getting an adapter and using it? I purchased the Atlona DVI to Mini DisplayPort Converter (AT-DP200) to connect my 2008 MacbookPro (with GeForce 8600M GT) to the new 27 in. Cinema display, and though it works, it looks a bit fuzzy in terms of resolution. Having read the response here about making sure it is a DUAL link converter, I was going to try to return it for the AT-DP400.
Then I read another thread on here that seemed to indicate that the AT-DP400 would not work at all with the 2008 Macbook Pro.
http://discussions.apple.com/thread.jspa?threadID=2585380&tstart=0
So now I'm confused. Just wondering what your experience is, if you ended up with getting the display and converter.

Mac Pro - Windows 7 - Apple Cinema Display

Hi -- after years of not installing Windows on a separate drive, I finally did it. The install went failrly well, wireless devices work in Windows 7. My remaining issue is that Windows 7 doesn't seem to recognize the Apple Cinema Display (ACD) with the Mini Display Port. If I switch to a different DVI monitor, the display seems fine. However, if I go back to the ACD, the display shakes upon boot up, and the resolution, screen size in off and a generic display is seen in the Control Panel. Sometimes, it does recognize the ACD, which is weird, but never on boot up.
Is the only solution running a DVI adaptor and not using the ACD with the Mini Display Port? When I first installed the BootCamp drivers, it seemed to work, but there were a few updates afterwards, and it seems that I lost whatever had stabilized the issue.
Thanks!

There was someone complaining about using two VGA monitors on 2010 w/ ATI 5770.
There is an improved dual display support now in Windows 8. Windows 7 was always "where is my screen" on startup. The video port close to the motherboard seems to be A or primary that it looks for on startup.
I have 23" ACD (2006 unit) Mac Pro but always used GTX, no ATI card (well recently I was using Windows only and an ATI 6790 or something).
And of course you must have installed ATI (Windows own drivers are iffy or "okay" but not the best.
Apple drivers for Windows (aka "Boot Camp" 3.x or Lion's 4.01) include driver support for the ACD.
You say MDP and 4870 in profile, but I didn't think Apple's 4870 had one, and flashed PC cards always have trouble (unflashed 4870 would of course work as normal as can under Windows).
Rollback update of driver is one step. Run Driver Sweeper 3.2 and CCleaner (and clean the registry) to get the graphic driver installed and 'clean.'
Patch Tuesday can always affect a few systems and a problem but more likely a conflict with something else.
One at a time see if you can get new graphic driver to help.
Wtih the 5770 Apple tech note does mention not using adapters.
And don't allow Windows to provide gpu driver if it asks

Mac Pro 2008 Apple Cinema Displays are black and there are start up issues

I have a Mac Pro 2008 Dual quad 2.8 GHz. I have two Apple Cinema Displays (graphics are the standard ATI Radeon HD 2600 – 2 dual link DVI. I have 4 2-GB RAM sticks (8 GB total).
Neither of my displays are showing anything. Their power lights are on but they are completely black throughout the start up process. In addition when I try to boot up with both graphics cards installed, I get nothing – no beeps no chimes. If just one card is installed (either card in either slot) the computer beeps, chimes and makes the sounds of booting up, but not a flicker on the displays. RAM does not seem to be the issue as I have tried booting with several configurations of RAM sticks with no negative or positive effects. I tried booting up with Hard Drives 1 & 2 removed with no effect. I have tried several different start up moods and have reset PRAM.
My guess is that there is something wrong with the motherboard. Or is it possible that both graphics cards are bad?

The "least intensive" thing you can do is hold down Alt/Option at Startup. Thsi invokes the all-in-ROM Startup Manager, which will light up the screen gray or blue, then attempt to draw an Icon for each potentially-bootable Volume attached (if any). It works as if in slow motion, so you must be patient. If no activity after about two minutes you may count that as a failure.
The next most intensive is to attempt to boot from an incorruptible source of software, such as an Installer/Utilities DVD. This again uses the "one-size-fits-all" display driver, and attempts to load software off the DVD. The dark colored Apple is loaded off a drive -- it is not present inside your Mac.
The next most intensive step is to attempt to boot into Safe Mode. This also uses the "one-size-fits-all" display Driver, and does a disk check as it starts up, adding five minutes to the startup time. It then drwas a login screen and deamds your username and password, even if you normally auto-login.

ATI Radeon 9800 Pro and Apple Cinema Display compatibility

I'd like to buy an Apple Cinema Display for my 5-year-old Power Mac G5 with an ATI Radeon 9800 Pro, but I'm having trouble understanding what I can and can't hook up to my system.
I was thinking of getting a 30" display, but the Apple Store says I need a Dual-Link DVI, which I don't think my graphics card supports, but the Store also says I need an ATI Radeon 9650 or better, which I imagine the 9800 Pro is.
I've looked at the ATI site for data on the graphics card, but their online manual shows a completely different set of connections on the card. They show VGA and S-Video out ports that mine doesn't have.
Does my ATI Radeon 9800 Pro have dual-link? If so, can I use the 30" display? If not, can I still use the 30" display?
If I can't use the 30" display, are there any compatibility problems with the 23" Apple Cinema Display?

The 9800 is faster than the 9650, but it doesn't have a dual-link DVI port.
Make sure you were looking at the Mac section of ATI's site. PC and Mac versions of the same card may have different port configurations.
AGP cards with dual-link DVI, starting with the fastest:
ATI Radeon X800 XT 256MB (ADC, dual-link DVI) (Some reports of problems with Leopard)
<http://www.welovemacs.com/0831xeghr.html>
NVIDIA GeForce 6800 Ultra 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613332.html>
NVIDIA GeForce 6800 GT 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613441.html>
ATI Radeon 9650 XT (Single-link, dual-link DVI)
<http://www.mac-pro.com/ATI-Radeon-9650-256MB-for-G5-661-3593?sc=2&category=42>
ATI Radeon 9600 Pro PC & MAC Edition RoHS 256MB AGP (Single-link, dual-link DVI)
<http://shop.ati.com/product.asp?sku=3170809>
A 23" will work with any G5 card.

Mackbook Pro hookup w/ Clear plastic Apple Cinema Display

Similar Messages

Maybe you are looking for