MacMice "The Mouse BT" disabled after Firmware update

I tried the firmware update and lost connection to my MacMice "The Mouse BT." As others said, the updatge never seemed to complete.
I changed the batteries in The Mouse BT. They were old anyway. Still no connection. Going with a previous topic, I reset PRAM (command-option-p-r) and regained the MouseBT. But later --- not sure if it was a logout or restart, I lost connection to MouseBT and have been unable to get it back.
Resetting PRAM has not fixed this since.
My BT preference pane does identify the mouse as
Paired: yes
Configured: yes
Favorite: yes
Connected: no
When I turn over MouseBT I can see the red optical light while touching the scrollwheel. Help!

This question is NOT answered!
The update blew my Bluetooth away. Mouse & KB not recognized properly. Got a wired kb & mouse. Still not perfect. Bluetooth gone from system. Called support. Eneded up dropping my G5 off at Apple yesterday for a new board! Covered service but no computer for 7 - 10 days!
Apple??
Cheers,
Frank
iMac G5   Mac OS X (10.4.3)  

Similar Messages

  • After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

    Hi
    After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right. 
    I can't see menus, just version number and the basic setup page.
    Router Linksys WRT160 v2.
    Allan

    Hi
    Thanks for the reply.  
    I't works ok now.  
    Thanks again.
    Allan

  • MacBook Pro Won't Boot after Firmware Update

    So I just upgraded to a MacBook Pro which came in the mail yesterday. I removed the Apple-installed HD and swapped it out for a bigger, faster HD. I installed OS X from scratch, imported everything from my Time Machine backup during the Setup Assistant, and then started installing updates. Everything was running swimmingly until the last updates.
    What happened is when I rebooted my MacBook Pro and logged in after a series of updates, I got presented with both a Bluetooth update and a Firmware update at the same time. Both required a restart so I thought I would kill two birds with one stone. I installed the Bluetooth update, and then when it asked to reset I installed the Firmware update instead. However, the firmware update didn't behave as advertised because instead of shutting the MacBook Pro completely down, it restarted and then started installing the firmware update.
    Ever since the firmware update (which I think installed correctly but don't know how to verify), I cannot boot my MacBook Pro. Using the OS X install DVD I can view my firmware version using System Profiler, and the number it is reporting is MBP53.00A.B03.
    I have tried booting in verbose mode to try and get a feel for the problem, and it eventually hangs on an infinite loop saying something about not being able to find something on disk0s2.
    I also thought I would fix the problem by doing an Archive and Install, but it quit at the very beginning of installing with the error "unknown error".
    Also I thought I would format the disk with Disk Utility and then try installing again, but Disk Utility reports that it in unable to unmount the volume.
    Any help you can provide would be greatly appreciated. Thanks!
    -- Update --
    Remember how I'm unable to unmount the drive? I force unmounted it and then used Disk Utility to repair the volume, but still no luck.
    I think the key to the problem is this new HD I put in runs at 3 Gbps. I think I read somewhere that the new MacBook Pro's don't support that.
    I think next I should try swapping out the new HD in my MacBook Pro with the one it originally came with. What do you think?

    I, too, have a brand new MBP 15" that I put an Intel X25 in. At the 1.5 (Prior to Firmware Update) setting, it worked fine. I rant the Firmware Update, all looked fine, but the drive is no longer able to be seen.
    Flash the PRAM, per other suggestions to no avail. Boot off of the DVD and disk utility nor Profiler sees the drive.
    Replace the drive with the stock that came with the MBP (which I had never even used) and it works.
    Put the Intel X25 into a Windows machine and it works fine. Reformatted it (in windows) and put it back into my MBP. Still not able to see it (from the Disk utility after booting off the DVD).
    Intel's firmware for the drive says its up-to-date (new drive) and if I attempt to "re-run" the Mac Firmware Update, it says that the machine is already up-to-date.
    Seems odd that it worked before an now it doesn't. Also seems odd that the X25 works in other machines. And that my MBP works just fine with the stock Hitachi 7200 320GB drive.
    Ideas? Intel says to call Apple Support. Not sure what I can say to them.

  • My phone is still disabled after software update and i cannot seem to reset my passcode someone help me

    my phone is still disabled after software update and i cannot seem to reset my passcode someone please help

    Does the Ipod see the network?
    It sure sound like the drop cause some other internal damage like breaking/loosening the connection to the  antenna. See:
    http://www.ifixit.com/Teardown/iPod-Touch-4th-Generation-Teardown/3562/3

  • 3014 error i can't restore ipad after firmware update attempt

    3014 error i can't restore ipad after firmware update attempt

    See this thread with the same question.
    https://discussions.apple.com/thread/5045573?tstart=0

  • Audio in problem after firmware update

    hey all,
    I've recently started using garageband to record and play around with my music, and I love it. Unfortunately, after installing the recent firmware update, my computer's audio in jack doesn't work anymore. It recognizes that there's something plugged in, but instead of having an signal, I get this clicking that clips the audio input at almost any input volume. I have tried it both with my bass and just the cable, and I have also just plugged some headphones into the jack- same results for everything. Is there anything i can do about it or do I just have to wait for another firmware update before I can use garageband again?
    2.2Ghz Macbook Pro   Mac OS X (10.4.10)  

    well what happened was I was updating iTunes (7.3.1) and the updater said a quicktime update and a firmware update were both available so I downloaded and installed and now the problem. It's like a really fast click track when I plug in and it's not just in garageband, I'm getting it in the audio-in option in the system preferences menu. Do you think doing a system restore would solve this problem?
    PS- I believe the update was something along the lines of a "kmbp firmware update" I think that's what it was called... :/

  • Restoring after firmware update - Ways :)

    Hi All,
    Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware.  I would like all to discuss to come up with some ways to restore their applications after firmware update.
    Before updating firmware
    Customer can backup his phone using Nokia PC Suite's Content Copier application.
    He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
    For his Contacts he can sync with pc suite supported sync applications.
    Messages he can store in Memory card and he can make a backup of memory card in PC.
    If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
    For Music he can use Nokia Music Manager or Nokia Music.
    Once after updating his firmware, if he is unable to restore he can get those from above said applications.
    If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
    Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

    Hi,
    If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
    you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
    Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth.  Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
    Its better to skip memory card backup while backup-ing other Phone data for faster backup.  Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
    Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
    Hope this could help
    I welcome our experts to add more details related to this topic.

  • Problems after firmware update 52.0.007

    Hi,
    I got my phone back after the shop fixed a problem and updated the firmware to the latest version 52.0.007.
    But now I have following problems:
    I can't get the calendar anymore to show up on the homescreen, even after checking the checkbox to do so
    The Radio app. is gone
    Does anyone has a solution for this?
    Iwan

    It may sound crazy but sometimes you need to "hard reset" device after firmware update (beware all data erased) by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself). Sometimes UDP = User Data Prersevation feature of 5800XM can carry over corrupt entries when updating.
    Happy to have helped forum with a Support Ratio = 42.5

  • Ovi Maps 3 don´t start after firmware update (6220...

    Hello!
    a few days ago I installed ovi maps 3 on my nokia 6220c and it works well. Later I updated the firmware from version 03.06 to 05.15.
    After firmware update ovi maps don´t start-> "Cannot open application. Install latest version from nokia.com/maps."
    But Nokia Map Updater says, there are no updates for my maps.
    What´s wrong?
    Can I reinstall Ovi Maps 3? Or is it possible to install Ovi Maps 3 new?
    thanks

    Hello!
    The Map Updater said: "there is no update for your phone" ...because maps 3 is already installed.
    But in the meantime I have found a solution!!
    I downloaded maps 2.0 from the German nokia page and installed it. Later I started Map Updater and could update to Maps 3 and now it works!!!
    I think the problem was: I first updated to Maps 3 and later updated the firmware. There was any older version of fixes included in the firmware update, so Maps 3 was damaged...
     thanks
    sorry for my bad English

  • Data recovery after firmware update

    Hi guys,
    does anyone know it it is possible to recover data after firmware update in N8? some data are preserved (videos) and some are lost (photos).
    thx.

    if you didn't backup them, there is no way to recover them
    Greece Nokia X6 RM-559 v40.0.002

  • Is there a fix for the wifi connectivity issue after ios6 update?

    Is there a fix for the wifi connectivity issue after ios6 update?
    Cannot connect to any wifi since update to 6.0.1
    How do I get update to 6.0.2?
    Will that even help?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • IPhone 5c voice dial cannot be disabled after software update. Is there any way around this?

    iPhone 5c voice dial cannot be disabled after software update. Is there any way around this?

    Hi! It seems you found a bug on iOS 7.1
    To disable Voice dials try this, (I saw in an iPhone website here in Brazil):
    1. Turn on Siri (settings > General > Siri)
    2. go to  (Settings >Passcode > Voice Dial) trust me, it appears now
    3. disable Voice Dial
    4. go back and disable Siri
    hope this could help you!!

  • IPad was disabled after ios7 update. How do I enable it?

    iPad was disabled after ios7 update.It would not accept my passcode.
    How do I enable it?

    There are instructions on this page for resetting a disabled device : http://support.apple.com/kb/HT1212 - you can then restore/resync your content to it

  • Photos stream has been disabled after last update

    My Photos stream has been disabled after last update, after enabling it all photos were deleted and only new photos are being updated there.

    Hello,
    Have you check this link? http://support.apple.com/kb/ts3989

  • I have a macbook air from mid 2012. After installing the MacBook Air Flash Storage Firmware Update 1.1 my computer shuts down instead of restarting. Does my macbook need a replacement drive?

    Anyone experience the same result after installing MacBook Air Flash Storage Firmware Update 1.1? Why did my macbook shut down?

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

Maybe you are looking for