MacMini 10.6.8 Snow Leopard can't connect to Windows 7 PC Printer over LAN?
I've searched for solutions and have found several (1) here gets me close, and similar (later too) (2) here.
When I add the new printer using the syntax in link 1 above, which looks like this:
smb://Jack:[email protected]/EpsonStylusPhotoR320,
them try a test print, the message I read in the printer queue is "authetication required".
When I try to resume the held print job, OSX pops up a dialouge box with my Windows 7 PC User ID of Jack listed. I enter the password Jds02524 (which of course is already in the printer syntax string), and click resume, but the job goes back on Hold again and I see another error message reading "NT_Status_Invalid_Parameter".
SO I'm really stumped here and hoping for some expert help.
Thanks!
Asatoran wrote:
It's "hard" because printer sharing in Windows is mostly broken for anything other than Windows...and even then it's often unreliable. Me personally, I've stopped sharing printers and started buying network capable printers. For my older printers, I've placed them on print-servers. (A D-Link standalone one for my Epson and the USB port on a Apple Airport for my Canon.) Tons more reliable printing to a network printer in a mixed OS environment.
I know that's wasn't really the answer you were looking for, but consider the lack of respones you got.
Well thanks for taking the time to at least answer! I really appreciate it.
Similar Messages
-
Snow Leopard: can't connect to AFP server anymore
We are using the MacServerIP (9.0) AFP server on a windows 2003 server. After updating from 10.5 to 10.6 we can not connect to this server using AFP anymore (connection failed). Connecting via SMB works fine.
Thank you very much!!I have the same problem logging in to an old Snap Server via AFP. "you entered an invalid username or password." is the error message. All was well in OS9 through 1.4 but this broke on 10.6 upgrade fro 10.4.
Apple support has not solved the problem. One thing I noticed is in the login dialog box there is no longer a list of options like there was in all versions up through 10.4, like sending password in clear text.
It is clear, that the two computers see each other given that the request for name and password come up for the target server. -
Snow leopard can't be installed on my machine.
Alright, here goes. Thank you in advance.
BACK STORY:
I have an Intel iMac. I've had it for a few years and it's always been awesome. I was running Leopard, and it was all gravy. So much so, that I even took it in to my Apple store to see if there was anything I needed to do to protect my machine, or if there were any updates for my machine that I should purchase. Dude at genius bar said yea, there is an iLife update and a new version of OS, Snow Leopard. He told me he would update my macbook (which was getting a new hard drive put in) for me and show me how to do it, so that when I got home with my iMac, I could do the same update to it. iLife 11 and Snow Leopard installed perfectly on my Macbook (my secondary computer). I tried to installed Snow Leopard verbatim what the Apple associate showed me, with his written directions. Popped in my disc, selected English, install began, got about 1/3 of the way through the progress bar and an error message came up reading "Snow Leopard can't be installed on this machine". Interesting. Apple store guy said I was good to go?
DIAGNOSIS FROM APPLE STORE:
I took my iMac back to the apple store the next day, with my macbook incase I needed to run a firewire from iMac to Macbook to transfer files. Dude tried to save some of my data but couldn't access it. He told me there was a OS conflict and he was unable to archive and install. He gave me a card with all the information for a data recovery service and told me I was SOL. Great. I took my mac in to make sure it was good to update, he said yes, and then I did it, in turn frying my main computer into a useless paperweight.
FUNCTIONALITY:
When I try to turn on my iMac now, it goes to a grey screen with an apple and a spinning gear. This screen stays up for about 45 seconds and then the computer shuts off. I've connected a firewire to the iMac and my Macbook and held the T key down in an effort to save my photos and music etc. The firewire symbol comes up on the iMac, but nothing appears in my finder on my Macbook like an external hard drive would. If I put the Snow Leopard disc in, and hold the T key, the Snow Leopard disc will show up in my Macbook's finder/desktop. If I put the Snow Leopard disc in the iMac and boot it up the computer just shuts down, even if I hold the C key. If I boot with the Leopard disc and hold C, the disc will mount and I can re-install Leopard, but I get a warning that all of my data will be erased in doing so. Obviously I don't want to part with 200+ GB of data. My last back up was about a month before all this so it won't be the end of the world but there are photos and other things that are recent to my hard drive with no back up and that I'd rather not lose if I don't have to.
BASIC INFORMATION:
I'm 24 with a bachelors degree and I am very comfortable with my mac. AKA you don't have to reply like you're teaching your grandma how to email.
My iMac IS an Intel iMac.
I have 47 GB of free space on it, plenty of room for an OS update.
Firewire ports are FW400 on both computers.
I had to archive and install Leopard once about a year ago on my iMac. Not sure why there was issue, but the problem was fixed when I did this.
So, do I have any options here besides erasing my hard drive? Has anyone ran into this before. Sorry for the rant. Thank you again.Attach an external hard drive to the iMac. Boot from the Snow Leopard disc again, launch Disk Utility, go into the Restore tab, select the internal drive as the source, select the external drive as the destination, and restore. Then partition -- do not merely erase -- the internal drive, and see whether you can install onto it. If you can, use Migration Assistant to restore your data from the backup.
Not backing up = inevitable data loss. -
have early 2007 MacBookPro, Intel core 2 duo, 2.16 GHz; six mos ago expanded memory to 3GB to upgrade software to Snow Leopard; can I install Mountain Lion on my hardware?
Supported
Models
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer) -
Upgraded from tiger to snow leopard, can I go onto lion?
I have recently upgraded from tiger (I think) to snow leopard, can I go onto lion?
I have a imac 17" 2 GHz Intel Core 2 Duo, 1 GB 667 MHz DDR2 SDRAM, I think I bought it in 2007, I don't use it for much but a bit of browsing storing photos and music and maybe a couple of documents.
I have been told by some that if I go to Lion it would be a risk and slow the computer down, so just wondering what you all think.
Thanks in advance,
Rossihttp://www.everymac.com/systems/apple/imac/stats/imac-core-2-duo-2.0-17-inch-spe cs.html
According to unofficial sources, you can upgrade to 4GB RAM. I've done the same in my late 2006 iMac 20" which is offically upgradable to 3GB, but I stuck 2 x 2gb modules in anyway (mainly as I had one spare from my MPB). It's dead easy to do, I'm in the UK and bought Crucial memory which I've always trusted.
I believe the Mac will still only use about 3.3GB of the available 4GB RAM, however some people have reported better performance as both modules are the same size and this helps.
Probably worth getting 2 x 2GB given it's not that expensive. You can always keep your old RAM incase anything goes wrong.
I'd do this regardless of upgrading to Lion or not, the extra RAM will help.
BTW, regardless of a lot of the negativity, I love Lion, it speeded up my other 2007 MBP like it was a new machine. The iMac seems okay, although that is showing a few signs of some graphics glitches, but I don't think this is anything to do with Lion, more about overheating.
Best thing to do, is to clone your existing system (using Disk Utility or SuperDuper or CopyCloner) so that you can boot off that or restore it at anytime without losing anything of your setup.
Then clean install Lion (there are instructions about on how to do this, and create a bootable USB key). You can then migrate back your user settings from your clone to the Lion install. Or just upgrade Snow Leopard. Depends on whether you believe in fresh installing everything.
If you don't like Lion, or it's slow or whatever, you can always restore your snow leopard system from the clone. -
I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?
Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3 -
ipod touch 4g 4.3 not detecting in itunes 10.1.2, i am using mac os x 10.3 snow leopard, can someone help?
You do not need Snow Leopord (10.6.X), but you do need Leopord (10.5.8) and iTunes 10.x for iOS 4.3. You need iTunes 10.5 for iOS 5
For the Current (iOS 5 iPod touch specs)
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.5.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.5 or later (free download from www.itunes.com/download)7 -
I have a mac os 10.5.8, i want to upgrade to mac os snow leopard, can i keep all my files (documents, music on itunes) without backing up all the files first on a external device prior to the upgrade?
I strongly advise against upgrading the OS without first making a backup. Were something to go wrong you would lose all your files without the backup. See:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s). -
I want to upgrade my iMac to Snow Leopard, can I use the (DVD-Mac OS X 10.6.3) that I got with my purchase of the 15" MacBook Pro that totally died, and upgrade the iMac from that DVD that came with the laptop ? Thanks
No, that 10.6.3 DVD is system specific to the MacBook Pro.
You need a Snow Leopard Upgrade > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
or if a MobileMe users > Apple throws MobileMe users a free version of Snow Leopard -
A few days ago, my HP printer software updated automatically, everything seemed fine (Mac is running Maverick, my laptop is Snow Leopard). Out of the blue yesterday, my printer stopped printing (neither Mac can connect), I have tried everything. Both the suggestion from HP and Apple, it's making me crazy I've spent most of time trying to fix it.
You tried exactly what ?
I most of the time would start with the same Apple Printer Support page tech articles
OS X Mountain Lion and OS X Lion systems will have the necessary printing software already installed, or will automatically download and install software when the printer is connected or configured. Do not install software that came with the printer as it may be out of date, and do not connect the printer to your Mac yet. Follow the instructions that came with the printer to unpack, install ink or toner, and insert paper. Finally, use the instructions in this article to connect the printer to your Mac.
Make sure the printer model is listed in Printer and scanner software, which is a comprehensive list of all printer models that have compatible software for OS X Mountain Lion and OS X Lion.
How to add a printer
Start a print job on the Mac and manage its options
Generate and manage PDFs
Manage the printer queue and printer dock icon
Share the printer queue
Mac OS Printing/Fax (any version), OS X Lion, OS X Mountain Lion
http://www.apple.com/support/osx/
printing in OS X Mountain Lion
http://support.apple.com/kb/HT4670
Try to delete the print queue under Print & Fax / Print & Scan then manually add a print queue.
Steps here: http://bit.ly/TdUuHL
If it doesn't work, reset the printing system:
http://support.apple.com/kb/HT1341
then add another print queue manually. -
I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?
The Mac running Snow Leopard should be able to configure virtually any version of the AirPort Express.
Tell us what steps that you are taking to configure the Express and what happens after each step. -
I want to update to Snow Leopard, can I download it?
I want to update my MacBook Pro OS X 10.5.8 to Snow Leopard, can I downloard it?
No.
You would have to buy the install disk. -
I still have snow leopard, can i switch over to mountain lion or i need to have lion first?
i still have snow leopard, can i switch over to mountain lion or i need to have lion first?
If your system meets the Mountain Lion specs, http://www.apple.com/osx/specs you can go directly to ML from Snow Leopard.
-
I have a desktop MAC OSX Leopard. I want to upgrade to Quicken 2007, install Snow Leopard, download iLife'11. I heard that Quicken and Snow Leopard can clash..........that is why I am upgrading Quicken. What would be the best order of installing these products. I have gotten defferent opinions and I want to be sure I install them correctly.
Thank You.First, install OS X, then install your third-party software.
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal
startup drive.
C. Important: Please read before installing:
1. If you have a FireWire hard drive connected, disconnect it before installing the
update unless you will boot from this drive and install the update on it.
Reconnect it and turn it back on after installation is complete and you've
restarted.
2. You may experience unexpected results if you have installed third-party system
software modifications, or if you have modified the operating system through
other means. (This does not apply to normal application software installation.)
3. The installation process should not be interrupted. If a power outage or other
interruption occurs during installation, use the standalone installer (see below)
from Apple Downloads to update. While the installation is in progress do not use
the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading.
6. Follow instructions.
After installing Snow Leopard you should update it by downloading and installing Mac OS X 10.6.8 Update Combo v1.1. -
Control-Shift-W activates Snow Leopard-Like exposé for all windows. Can this be disabled/changed?
Running Mac OS X 10.7.2 on my MacBook Air, Control-Shift-W produces a Snow Leopard-like expose for all windows.
While useful, this keyboard shortcut is wreaking havoc with my BBEdit settings. (Control-Shift-W is used to toggle "Selected text only" in the "Find" window.)
Does anyone know a way to alter or disable this system shortcut? I haven't been able to find any information regarding this shortcut and I fear I may have altered an underlying property (using "defaults write…" at the command line) and I don't know how to revert what I (may) have done.
Thanks in advance.I suspect that it's busy trying to mount a network file system of some type.
Are there any errors in your logs that seem appropriate (viewable via Applications->Utilities->Console?)
Maybe you are looking for
-
Help with photo collage in Elements 10
I am new to Photoshop Elements 10. I am trying to create a photo collage, but a window pops up saying "Valid size not available for this creation". Can someone help me fix this so I can create??
-
I have music on one device that I would like to get on another, but when I try to download it, it just says purchased. What do I do?
-
Business connector routing rule problem
Hi All, I am currently working with BC 4.0 and trying to change the service via developer and I see the changes are not at all reflected when I execute it. Also, even though I do not have routing rule for executing a service from a RFC call, the old
-
Why does Software Update want to install ProKit Update when I don't have any of the listed apps?
Software Update just prompted me to install ProKit Update 7.0. I don't have any of the applications listed in the description. I searched for each with Spotlight just to make sure. My Macbook has only a clean install of Snow Leopard, Microsoft Off
-
Elements 11 and Hero 7.1 Kodak Printer
With Elements 11 my Hero 7.1 printer only uses the bottom paper tray. Help?