MacMini 2010, USB ProfileMaker Dongle doesn't work!

Hi, i'm trying to calibrate the monitor connected to the macmini 2010 with ProfileMaker, but the macmini doesn't power up the USB dongle, needed to start the application.
I've tried evert single USB port, but it seems that the macmini doesn't send enough power to the dongle, the Power LED is off.
Everything's fine on Mac Pro and iMac.
i'm running snow leopard 10.6.6

Have you tried adding a Belkin wall powered USB hub to the Mac Mini?

Similar Messages

  • USB Bose Audio Doesn't Work & DVD/CD Ejects during startup 10.6.1

    Anyone having this problem on the Mac Pro 8 Core
    USB Bose Audio Doesn't Work, have to pull USB plug out and put it back in for audio to be recognised & DVD/CD Ejects during startup >>> 10.6.1

    What is the ouput of cat /proc/asound/cards, aplay -l?
    For an example:
    [firekage@arch_desktop ~]$ cat /proc/asound/cards
    0 [XFi ]: SB-XFi - Creative X-Fi
    Creative X-Fi 20K1 SB073x
    1 [NVidia ]: HDA-Intel - HDA NVidia
    HDA NVidia at 0xf6080000 irq 17
    2 [U0x46d0x825 ]: USB-Audio - USB Device 0x46d:0x825
    USB Device 0x46d:0x825 at usb-0000:00:14.0-7, high speed
    [firekage@arch_desktop ~]$
    [firekage@arch_desktop ~] aplay -l
    card 0: XFi [Creative X-Fi], device 4: ctxfi [IEC958 Non-audio]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    [firekage@arch_desktop ~]$
    I think that you have multiple sound devices and their boot order changes after each reboot.
    Last edited by firekage (2014-06-20 13:13:05)

  • My external Apple USB Keyboard letters doesn't work, but the numbers do. Why and how can I fix this issue?

    My external Apple USB Keyboard letters doesn't work, but the numbers do. Why and how can I fix this issue? Also, When I open the Keyboard Viewer, the letters will highlight only if I hold the modifier key(s) "Control" or "Control and Option". I really need help with this. I don't have any other computer to try it on, so I will have to test it on a friends computer sometime. But perhaps solutions that I can try right now? Thanks.

    Hello there, IDuncan23.
    The following Knowledge Base article has some great troubleshooting steps you can follow to work on resolving your keyboard issue:
    One or more keys on the keyboard do not respond
    http://support.apple.com/kb/ts1381
    Thanks for reaching Apple Support Communities.
    Cheers,
    Pedro D.

  • USB Flash Memory doesn't work !

    Hi There.
    my USB Flash Memory doesn't work and doesn't appear in disk utility. I also make sure that external disks are checked on Finder Preferences. and it's formatting to be worked with mac. it's work with my friend macbook pro. But Mine doesn't!!!
    any help guys i'll be thankful
    regards.

    Which MacBook Pro do you have and which does your friend have? Do either or both of you have USB 3.0 ports?

  • D-Link dbt-120 USB Blue tooth dongle doesn't work., D-Link dbt-120 USB Blue tooth dongle doesn't work.

    As many of us know, The Mac Pro has the worst BT signal of all Mac products. It is especially problematic when using Wifi (2.4g), causing the Magic Mouse, Wireless Keyvboard and wireless slate to sluggishly move, or not function at all.
    I just purchased a replacement MacPro (2010) for my aging 2006, and noticed that Mac still has the same issues. Unfortunately, I must use Wifi and especially the 2.4g frequency. My wireless products are 1 foot from the box, and I have even tried removing the side cover on the Mac pro along with the removal of the battery cover on the Magic Mouse. Yes, when I do this, reception is a bit better.
    I know a replacement machine wikll not fix the problem, and Apple has yet to even really address it. I had read somewhere that Apple had quietly supported the D-Link dbl-120 USB BT dongle, so I bought one. When I plug it in, the dongle lights up, but nothing else happens. It does not show up at all in the system profiler for USB connections. All drivers that come with this dongle are Windows based only. Various FAQ's state it is fully compatible with this dongle and should work right out of the box.
    I think Apple needs to update its tagline that state's, "It just works".
    Any ideas??
    Mac Pro 5,1 (Mid 2010)
    6-core Westmere 3.33
    24 Gig Ram
    6 TB Storage
    Blackmagic Decklink HD Extreme PCIe Card
    CalDigit FASTA-6GU3 4 port eSata / USB3 PCIe Card
    Lion 10.73 OS

    I've used a IOGear GBU421* for more than a year now with good results (once you learn to expect some slow MM pairing after sleep maybe 30% of the time).  I would expect the DLink dongle to behave similarly and you shouldn't need any additional software.
    Try doing a smc and pram reset -- the usual first attempts at trying ot fix BT problems.
    Try unparing and re-pairing.  Make the devices favorites.
    If you have xcode installed you can do a bluetooth factory reset with Bluetooth Explorer.  The always works in the few times I had to resort to it.
    With respect to the poor BT reception on the mac pro's, below is a link to probably the best discussion on this where there are posts talking about dongles and replacing the crappy internal antenna with an external antenna.
    Poor Bluetooth reception and jerky mouse
    * I keep my dongle plugged into the back of my 27" display which means it's about 1 to 2 feet from the MM.

  • USB OTG function doesn't work on Z30STA100-6/10.3.1.2243

    Like the title says, USB OTG doesn't work on my Z30 STA100-6 running the latest official OS 10.3.1.2243. It worked before on 10.2.1.3062. I did tried basic troubleshooting procedures like turning the device OFF then ON, reformat my flash drives to FAT, FAT32, and exFAT and even installed OS 10.3.1.1949, 10.3.1.2072 and 10.3.1.2677 for confirmation, all of which it still didn't work. In short, I haven't got the chance to make this work on any 10.3.1. Another thing: Upon further checking, I noticed that the USB column on the Networks and Connections settings displays "Connected" just by simply inserting the OTG cable into the micro USB port on the Z30 running 10.3.1, that is, no flash drive inserted on the other end. I even confirmed this by going to the engineering screens and confirmed that the device, upon inserting just the OTG cable, detects it and displays it as "OTG dongle". Any help would be appreciated as I really want to get to the bottom of this.

    Hi
    According to the Microsoft page the "Error code 10" appears If the device has a FailReasonString value in its hardware key, that string appears as the error message. The driver or enumerator puts this registry string value there. If there is no FailReasonString in the hardware key, you receive the following error message:
    This device cannot start. (Code 10)
    Recommended resolution
    Device failed to start. Click Update Driver to update the drivers for this device. On the General Properties tab of the device, click Troubleshoot to start the Troubleshooting Wizard.
    Ps: This is only a Microsoft tip but if the USB device cannot work because of the low power supply you should check if it work with the external USB hub wich supports a external power supply

  • HT4101 The Lightning to USB Camera Adapter doesn't work

    I just bought the Lightning to USB Camera Adapter but it doesn't work and show the message: it is not an authorised accessories..may not work reliabily

    the adapter doesnt work with ios 7 on a lot of new devices, so untill apple fixes the issue, here is a workaround http://www.youtube.com/watch?v=pE28JwxQ3Zc

  • USB personal hotspot doesn't work anymore with 10.6.8 Snow Leopard, iTunes 11.1 and iPhone5 ios7

    Ciao
    I'm using iPhone 5 with ios7 and Macbookpro with 10.6.8 SnowLeopard.
    After updating to iTunes 11.1and ios7 hotspot USB doesn't work anymore, wifi and bluetooth work fine.
    In system network preferences iPhone usb connection is not detected.
    I tried to change the kext file with the Time Machine's old one but no response!!!
    Can somebody help me
    Thanks

    Anyone has any advice? Or the problem is just the age and incompatibility of the old MacBook Pro 1,1 A1150 (Mid 2006) and the best way will be to change it into something newer?

  • USB mouse button doesn't work on MacBook Unibody

    Since the trackpad was not working, we have to use a USB mouse to navigate. After a few minutes, the mouse left and right button doesn't work. I can move the pointer around the screen and use the keyboard.
    Thoughts

    The same problem happens with a Bluetooth apple mouse. You can scroll up, down and use the secondary (the right click) The problem normally developes after the MacBook has been running for a while and gets hot underneath.

  • MSI K7N2-L usb 2.0 doesn't work with scanjet 4570c

    I have a MSI K7N2-L motherboard with WINXP and SP1 that doesn't work with Scanjet 4570C if I set USB in BIOS to 1.1+2.2.  Sometimes it locked up the PC or it showed streaks on the image.  It worked just fine if I set to USB 1.1.  Does anyone knows this is the problem with the MSI motherboard?  I'm sure it was not the Scanjet since it is USB 2.0 supported, and I'd tried another Scanjet and the problem was still the same.

    Quote from: Wonkanoby on 21-March-05, 21:14:07
    If you are having problems with USB ports, read this topic.
    besure you have only 8 wires connected no usboc
    Nice topic! 
    But usb 2.0 DOES work with 1.3, 1.4 and 1.52 BIOSes. Only after updating to 1.5 official one of the front panel ports (not all 2) start works as 1.1   

  • Musket a3 USB 600 Scanner doesn't work with Yosemite

    Hi there,
    I have a Musket a3 USB 600 Scanner that doesn't work now that I have upgraded to Yosemite. Does anyone have a recommendation as to how I can use it? As Musktek aren't helpful and have told me they don't have a driver for yosemite... is there a way around this? Any help would be appreciated. 

    I found this and testing now.
    http://www.canon-europe.com/Support/Consumer_Products/products/scanners/Others/P -215.aspx?type=download&language=&os=OS%20X%20v10.10

  • MP3+ USB External Card doesn't work when plugged into USB

    My MP3+ USB external sound card doenst' work whenever I plug it into my usb hub.
    Model: sb0270
    First I tried a powered D-link 7 port usb 2.0 hub. (model DUB-H7, H/W ver: 2) although the model number doens't tell you much is has the same model number as a USB/Firewire hub with 3/4 ports.
    The sound card is recognized as a "composite" device. But no sound goes "through" it (light doesn't flash).
    I'm now using a Belkin 7 port usb 2.0 hub, model f5u237 rev. 3.
    When I plug the soundcard into my computer it stops the laptop speakers, and then my sound system starts playing. When I unplug it my sound system stops, and then my laptopspears start playing. When I plug it into the USB hub the sound on my laptop speakers stops, windows finds a USB composite device, then the sound starts playing on my laptop speakers again.
    I've tried this on 2 computers a HP ZV600 and a HP dv5040us.
    dv5040us specs: http://h0025.www.hp.com/ewfrf/wc/genericDocument?cc=us&docname=c00584686&lc=en&jump id=reg_R002_USEN
    This is the only USB device I have that is not functioning correctly. (2 HDDs, keyboard, mouse, printer, mp3 player, controller, and joystick)
    Even if those arn't plugged it it still doens't work.

    I tried with another USB flash card and with a smaller file.
    The transferring from Mac to the card starts but is extremely slow ( around 0,5MB/sec)

  • USB 3.0 Doesn't work on HP PV6 35xx

    I installed Windows 7 and even after installing drivers, the USB 3.0 do not work and they are not recongized. Where do I find the right drivers?

    PV6 35XX doesn't give us much to work with.
    >  How Do I Find My Model Number or Product Number
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Usb Audio Codec doesn't work

    A few days ago I bought an USB Microphone (Samson G-Track). I don't know why It doesn't work. When I select in Sound/Preferences/Input the "Usb Audio Codec" but It says that there aren't input controls in the device. I tested it at Garage Band but It didn't work. I thought that the mic was defective but when I tested it in my mother's pc (Vista) It worked.
    What can I do?
    Thank you.

    But this mic is for Mac too. It's says that you "plug and play". I bought this microphone to record my music work at home.
    This is the website, It says that works fine with Garage Band but ...
    http://www.samsontech.com/products/productpage.cfm?prodID=1917
    *My english is not very good, I'm Spanish.
    Thank you!

  • Hello, I have purchased Adobe Design Premium CS5 with Acrobat Professional 9.0 with Win License in 2010.  Same computer, doesn't work any more?

    Hello, I have purchased Adobe Design Premium CS5 with Acrobat Professional 9.0 with Win License in 2010. Last month, the software is deactivated and asked me to reinstall it, however, the serial number I have doesn't work anymore. The computer is still the same, operation system is also the same. Something must be wrong with ADOBE. Can you help to resolve? Or direct me to a right person and number? Thanks!

    I tried, the Design CS5 worked that way, but not the acrobat pro. 9.0. I will update with what I was suggested to download again from Adobe volume licensing site. Since my computer is at my work. This is the site I was referred to:  Adobe Licensing Website | Serial numbers | Orders | Accounts

Maybe you are looking for