MacMini DVI colored static and KVM's

Hi
I manage 50 odd Mac's at work and have a new 09 MacMini. I have it connected via the Mini-DVI to DVI connector to a Rextron DAG12 DVI-I / USB KVM switch. I have been using the KVM for a year or 2 with a PowerMac G4 machine with no problems. When I connect the MacMini all I get is multicoloured static / a snowstorm (as described elsewhere) for about 3 seconds, then I see the actual screen for about 1 second and this repeats over and over making it unusable. I tried various resolutions / refresh rates and it made no difference. If I unplug and re-plug the DVI adaptor about 5 times it eventually stops doing this and I just get the screen as it should be. I then used it all day, switching between my mac and PC and left it on over the weekend and it was fine on Monday.
I discovered restarting the machine brings me back to the static mess (after the grey apple screens). As does opening iTunes or Quicktime. It appears to be related to video rendering. I also tested it on a new MacBook with the 9400 Nvidia chipset and get the static. I tried another 09 Mini and same problem. Tried another Mini-DVI adaptor and same problem. Tried both DVI-I and DVI-D cables from the switch to Mac.
I tried an older MacBook with the Intel X3100(?) chipset with the same DVI adaptor and it works fine. As did an old 1.83Ghz Intel based graphics MacMini.
Using the screen without the KVM seems to work OK but is no use to me. The fact that I can get it working for days as long as I dont restart or open iTunes / Quicktime seems to suggest it's something driver / software related to the Nvidia 9400 chipset on the Mac. Any ideas / thoughts? HDCP? I will try and get a mini-displayport to dvi connector to test that.
Matt
Message was edited by: Matt Hall

Matt,
It's been quite a while since I had this problem, so I was looking for my notes on fixing it. No luck there.
The bottom line is that the "native" refresh rate on your KVM is far enough out of specs for your monitor that it's affecting the display. When you plug directly into the mini, the display automatically senses the correct refresh rate and looks fine.
It's a hack, but here's what I did (after giving up on manually modifying the settings in Terminal and failing miserably):
1. Plugged the display directly into the mini and created a "calibrated" color profile for it in both user and admin accounts.
2. Connected the KVM and booted in safe mode, selected the "calibrated" color profile with appropriate resolution in all profiles.
2b. Made sure I unchecked the +Show profiles for this display only+ box in the Display > Colors tab for all users.
3. Plugged in the KVM and restarted in safe mode, doing 1 & 2 above.
4. Restarted and manually set the color profile and resolution.
It can take a few tries to get the settings to "stick."
-Wayne

Similar Messages

Mini + DVI splitter = colored static (argh)

What I want to do is mirror one of the video outputs of my Mini (one LCD on my desk, one on the conference table). I am already using both video outputs of the Mini (mini DVI and mini DP) to drive dual monitors (extended desktop mode) on my desk, so I have no spare video outputs.
Previously, I was using a DVI splitter (takes one DVI in, sends two identical DVI signals out), but with the new mini I get one good DVI signal and one that's all colored static/snow. I have checked the functionality of the powered DVI splitter using an old Macbook, so that is working fine (can mirror to two displays). So the culprit is the new Mini.
I suspect that the problem is the new HDCP encryption used in the Mini's video output. It would stand to reason that the Mini can only exchange encryption keys with one of the displays, so the other one will not be able to decrypt the video stream and thus display garbage (colored static/snow). This is annoying since this setup worked previously before Apple started using HDCP.
Any ideas?
I have yet to take this to the Genius Bar ...
Message was edited by: kenmai

Matt,
It's been quite a while since I had this problem, so I was looking for my notes on fixing it. No luck there.
The bottom line is that the "native" refresh rate on your KVM is far enough out of specs for your monitor that it's affecting the display. When you plug directly into the mini, the display automatically senses the correct refresh rate and looks fine.
It's a hack, but here's what I did (after giving up on manually modifying the settings in Terminal and failing miserably):
1. Plugged the display directly into the mini and created a "calibrated" color profile for it in both user and admin accounts.
2. Connected the KVM and booted in safe mode, selected the "calibrated" color profile with appropriate resolution in all profiles.
2b. Made sure I unchecked the +Show profiles for this display only+ box in the Display > Colors tab for all users.
3. Plugged in the KVM and restarted in safe mode, doing 1 & 2 above.
4. Restarted and manually set the color profile and resolution.
It can take a few tries to get the settings to "stick."
-Wayne

Messed up color display and resolution because of mini-DVI to video adapter

Once I connected the mini-DVI to video adapter to the tv and got weird colors on my screen for a while but then it worked out, then after a while I disconnected the cable and turned my computer off. After that, everytime I turned my macbook on, the color is fine for two seconds and then it turns into a weird offset color, really bright colors, kinda sketchy and just a few colors, and a weird resolution and display obviously, but then I just connect my Mini-DVI to video adapter and disconnect it again (quickly) and the color returns to normal. How can I make the normal colors stay and not have to connect the mini-DVI to video adapater everytime I want to see the normal color display and resolution??
please help!

Open the Universal Access pane of System Preferences, click on Seeing, turn off the White on Black, VoiceOver, and Zoom options, and drag the Contrast slider all the way to the left. If the issue persists, create a new folder on the desktop, drag half of the items from the Library/Preferences/ folder of the item in the Finder's sidebar with the house icon into it, and narrow down the files until you've isolated the one responsible.
(30807)

I've just hooked my 20" iMac up to my Toshiba 37" HDTV using a mini dvi-HDMI adapter, and works well, EXCEPT for the green tinge (or hue) that is showing up on my TV. Any suggestions or ideas?

I've just hooked my 20" iMac display up to my Toshiba 37" HDTV using a mini dvi-HDMI adapter, and everything works well, EXCEPT for the green tinge (or hue) that is showing up. Everything else looks pretty good though..... The color that is on my iMac is still good, Its just green on the TV.
Anyone have suggestions or ideas?

Try opening the Display System Preferences, then click on the Color options in the Display preferences window that appeared on the Toshiba display. Click on the Calibrate button and follow the instructions for creating a custom ColorSync profile that will hopefully solve the green tinge issue. The Apple Display Calibrator Assistant software that launches when you click on the calibrate button will walk you through the process.Assuming that the green tinge is minor and that you don't have a more serious cable or hardware issue, I am hopeful the results will be worth it.

HT5219 how can I connect two thunderbolt monitors to my macmini in windows 8 and bootcamp? Works fine in OSX

how can I connect two thunderbolt monitors to my macmini in windows 8 and bootcamp? Works fine in OSX

Did you try to hook up both monitors to the Belkin adaptor? Trying will determine if your monitor has a bad input port. See if the Belkin adaptor is the problem. I have never used that specific adaptor, but I have always had luck with the Dr. Bott's DVI for ADC adaptor. Best of luck.
www.drbott.com

Clip turns to pixellated color static upon insertion into timeline

I'm not sure how to fully describe this issue or how to fix it. I'm currently working on a demo reel with a number of clips that have different sizes, aspect ratios, etc. When I tried to add one particular clip to the timeline, one from a project I actually did in Final Cut Pro recently (the others were .mov's originally made in Adobe Premiere and Avid), when played back from the timeline the clip is utter color static, a pixellated mess. I cannot figure out how to fix this or what specifically is causing this odd issue.
Any ideas? ; )

The file that is pixellating is a .mov created in Final Cut (sorry if that's not what you wanted to hear). Here's the specs:
6.8GB
29.97 fps
720x480
DV/DVCPro - NTSC
3.6 MB/sec
Pixel Aspect: NTSC - CCIR 601
Field Dominance - None
Alpha - None
Composite - Normal
While I've managed to track down .mov's of the other clips, they have a plethora of sizes, ranges, and rates. There's nothing much I can do about this, they were done on an old system, on an old platform (some on Adobe Premiere and some on Avid) and I do not have a simple way to reconstruct them. If there's a way to get the .mov made in Final Cut to work as the other files have, that would be ideal. That one I can resave if necessary.
Here's the clips that have worked so far:
1) A 177.9 MB .mov, Cinepak Compressed, 720x480, 1.1 MB/sec, NTSC - CCIR 601, Field Dominance: Lower (Even), 29.97 fps
2) A 36.2 MB .mov, Sorenson Video 3 Compressed, 400x300, 155.6 K/sec, Pixel Aspect: Square, 29.97 fps
3) A 27.6 MB .mov, Sorenson Video 3 Compressed, 640x480, 29.97 fps, Pixel Aspect: Square, 159.9 K/sec
4) A 137.8 MB .mov, Sorenson Video 3 Compressed, 400x300, 29.97 fps, 111.9 K/sec, Pixel Aspect: Square

Color fidelity and the New MacBook Pro glossy display like iMac

I'm very concerned about the new MacBook Pro display which is glossy like the iMac. Can Apple guarantee precise Color fidelity and correct calibration for Pro users? Aren't glossy glass screens more saturated, deeper Blacks and higher contrasted. Aan Apple answer to this very important question that will draw or throw thousands of Professionals off the new Pro laptop.

Sorry, your comments only confirm the post above. Below is a copy of a comment from Charles Higgins posted to Maintouch. I copied it for posting here (I hope that is legal).
Charles Higgins
To those who must work in bright, unshaded sunlight, Hoodman makes a pretty good reflection/glare 'hood' (sic) that does its job, except it's godawful ugly and bulky.
To everyone else (designers, photogs, and image editors), who must often work in less than ideal outdoor and indoor environments with their MBP's (including the dreaded airline seat), I feel your pain. I do ALL of these jobs, professionally, am an Adobe Beta Tester, have a Cisco CCNE and independently consult for folks like The University of Massachusetts (all campuses), Smith College, Middlebury College, to name a few, on everything from spec'ing Video, Graphics, and Photography labs to deployment, training, etc...
However - the MBP's screen, reflective though it may be, is my favorite laptop screen so far, and I've tried all brands for a long time. I've owned and professionally used, daily, Mac laptops/notebooks since Wall Street.
If it's a deal-breaker to have a glossy screen, you need to re-examine your techniques for use- how you work, where you work, light sources, etc.- because it's a really good indicator of how accurately you perceive color, brightness and tonality accurately... in other words, under conditions that I get unacceptable glare and reflections on my new MBP's glossy screen (CTO 2.8, 320GB 7200 RPM, new 24" on order, DP to DVI adapter out to 30" Cinema Display in home office), I would be getting unacceptable 'light pollution' onto my matte 30" Cinema Display, or any number of CRT monitors I used professionally in days past (Sony Artisans, Barco, etc.), and that's a good barometer, to me, of whether I have a 'pure' viewing environment for critical color work. Just because one can eke out a good or acceptable image view on a matte LCD MBP screen, doesn't mean you should do color critical, submit billing to client work in that already compromised situation. The matte screen often delivers a 'false sense of security' to those folks who work professionally in graphics, video and image editing. I find, or create, an environment that I can work well in with regard to screen viewing, and that's where, matte LCD screen or Glossy, I can get the best results. If I cannot get that environment, I curse my lack of resourcefulness and do work that isn't color-critical, just as I would with any matte screen Mac notebook LCD. In my long experience, and comparing them to even midlevel CRT monitor screens (Mitsu Diamond Pro 22", etc.) is absolutely no contest. Matte screens have an unacceptably low contrast and brightness, and a more primitive rendering of fine tonal gradations and shadows to blacks. My 30" Cinema Display has some of these same shortcomings, of course - but to a far lesser degree. Still, those shortcomings are there, and for the same reasons. The new, DP equipped 24" Cinema Display is a piece of pro equipment that I look forward to immediately calibrating and putting to work immediately!
The clients I've converted to MBP glossy screens because of the shortcomings of any laptop matte screen BTW, my new MBP has a noticeably better screen than the glossy one on my early 2008 MBP (LED backlit); I calibrated both with Gretag MacBeth calibration hardware. I have been able to hardware calibrate the newer MBP to a tighter tolerance.
Got glare? That's a symptom you're gonna probably get less than accurate results from any screen. Having used matte LCD screens in Mac notebooks for many years, I'll take the new LED backlit glossy MBP screens over anything available so far.
----------------------------------------------------

By rotating the phone, the image and program remain static and do not turn with device

My name is Alexandra, I’m from Russia.
I have got IPhone 5. And screen rotation doesn’t work on it. (By rotating the phone, the image and program remain static and do not turn with device)
The IPphone's data is:
IMEI 01 340900 881941 7
ICCID 8970 1991 2092 3807 872
Vendors in my country explained to me that this case relates to the World APPLE warranty and I can exchange my IPphone for a new one in any licensed center in Europe. I want to reserve time for a visit to the AppStore in Barcelona for solution this problem. Is it possible? What do I need to carry?
I’m also more interested in possibility of replacing my phone on the same one in different color. Is it possible?
Thanks in advance,

Not all screens rotate. For example, the home screen does not rotate.
Also, having the portrait lock turned on will prevent all screens from rotating.
This is covered in the User's Guide.
There is no International warranty on the iPhone, never has been.
Warranty and support are limited to the country of origin.

DefaultLookAndFeel is giving blue color border and frame is visible

Hello,
When i am running my application with DefaultLookAndFeel,i am getting my screen with blue color border and Frame is visible.According to my requirement that blue color border and frame should not be visible.This problem is not there when i am giving my own LookAndFeel.So,please give me the solution for this.

This is my code. And i don't want external border which is not visible on maximized.
please respond to this.....
thanks...
import java.awt.BorderLayout;
import java.awt.Container;
import java.awt.Dimension;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JLabel;
public class BorderLayoutDemo {
    public static boolean RIGHT_TO_LEFT = false;
    public static void addComponentsToPane(Container contentPane) {
//         Use BorderLayout. Default empty constructor with no horizontal and vertical
//         gaps
         contentPane.setLayout(new BorderLayout(5,5));
        if (!(contentPane.getLayout() instanceof BorderLayout)) {
            contentPane.add(new JLabel("Container doesn't use BorderLayout!"));
            return;
        if (RIGHT_TO_LEFT) {
            contentPane.setComponentOrientation(
                java.awt.ComponentOrientation.RIGHT_TO_LEFT);
        JButton jbnSampleButtons = new JButton("Button 1 (PAGE_START)");
        contentPane.add(jbnSampleButtons, BorderLayout.PAGE_START);
        jbnSampleButtons = new JButton("Button 2 (CENTER)");
        jbnSampleButtons.setPreferredSize(new Dimension(200, 100));
        contentPane.add(jbnSampleButtons, BorderLayout.CENTER);
        jbnSampleButtons = new JButton("Button 3 (LINE_START)");
        contentPane.add(jbnSampleButtons, BorderLayout.LINE_START);
        jbnSampleButtons = new JButton("Long-Named Button 4 (PAGE_END)");
        contentPane.add(jbnSampleButtons, BorderLayout.PAGE_END);
        jbnSampleButtons = new JButton("5 (LINE_END)");
        contentPane.add(jbnSampleButtons, BorderLayout.LINE_END);
    private static void createAndShowGUI() {
        JFrame.setDefaultLookAndFeelDecorated(true);
        JFrame frame = new JFrame("BorderLayout Source Demo");
        //frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        //Set up the content pane and add swing components to it
        addComponentsToPane(frame.getContentPane());
        frame.pack();
        frame.setVisible(true);
    public static void main(String[] args) {
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
}

Credit Management: Difference Between Static and Dynamic Credit Check

Hi,
Could anyone tell the difference Between Static and Dynamic Credit Check?
According to website: http://www.sap-basis-abap.com/sd/difference-between-static-and-dynamic-credit-check.htm ... this is the answer:
====================
Simple Credit Check : Tr.Code - FD32
It Considers the Doc.Value + Open Items.
Doc.Value : Sales Order Has been saved but not delivered
Open Item : Sales Order has been saved , Delivered, Billed & Transfered to FI, but not received the payment from the customer.
Static Credit Check it checks all these doc value & check with the credit limit
1) Open Doc.Value / Sales Order Value : Which is save but not delievered
2) Open Delivery Doc.Value : Which is delivered but not billed
3) Open Billing Doc.Value : Which is billed but not posted to FI
4) Open Item : Which is transfered to FI but not received from the customer.
Dynamic Credit Check         1) Open Doc
                                            2) Open Delivery
                                            3) Open Billing
                                            4) Open Items
                                            5) Horizon Period = Eg.3Months
Here the System will not consider the above 1, 2, 3 & 4 values for the lost 3 months.
====================
Question 1: Could you further explain the above information, if there is any?
Question 2:: What is the Tcode to customize settings of:
a) Simple Credit Check (isn't this same with b) below?)
b) Static Credit Check
c) Dynamic Credit Check

Hi Tanish,
Diff between Static and Dynamic Filters.
Example One at report Level.
Create a variable for a Infoobject say ,Material .
1)In the Query Designer and if u restrict it to some 10 materials at query level, the report will display for only those 10 materials only.This is Static Filter.UR AHrdcoding it to those materials.You cant change them at Query Run time.i.e not changeable by user.
2)If u give the variable as input ,and when u run the query ,u can can choose the material,may 10 may be 1 or may 20 .It is dynamic.Changeable by user at run time
Example Two at DTP and Start Routine Level,say Document Type.
1)If u give filters in Start routine it is Static as u cannot change it in Production,not changeable by user.
2)f u give filters in DTP it is Dyanamic as u can change it in Production.U can give any doc type,Changeable by user at run time.
Hope it is Understood.
Rgds
SVU

Perform static and dynamic check together on a customer?

Hello All,
Is it possible to perform static and dynamic check together on a customer?
I believe standard SAP does not allow both options together.
The scenario is: My client has customer who orders products 1 year in advance and create sales order with a future delivery date. The customer might have balance due on their account which is close to the credit limit. As a result the sale order should be blocked as if the automatic credit check is "Static". This would allow our customer service to call the customer and arrange for the payments.
Then 11 months later, a dynamic check should be performed on the customer to make sure the past due is under the credit limit. If the past due is over credit limit, the sales order must be blocked for delivery as if the credit check was "Dynamic" with 30 days horizon. This would again give our customer service time to settle the payment with the customer.
If anyone has implemented such a scenario, can you please give me an overview of how you did it?
Thanks very much in advance and Text Removed.
With Regards,
AM
Edited by: Lakshmipathi on Nov 13, 2010 9:23 AM
Please dont include this text

Static and Dynamic Cannot be Performed together. They are mutually exclusive events.
Credit check can be performed either at Sale order level or at Delivery / PGI Level.
FCV3 is a good report to see whether a customer would fail a credit check. ( suitable for your customer service )
Coming to your Point , Assuming that the customer is eligible for a Credit of 50 Lacs. Now the Customer has placed an order for 60 Lacs. We set the Customer credit checking at order level . The Customers Sale order would get blocked.
The Customer service will follow up for the payment and see to it that it is made. Assume the customer has made a payment for 70 Lacs.
Now let us have a look at the account statement of the customer.
Account Statement : Customer Cr : 70 Lacs. Dr : 0. ( because no delivery and invoice so far has been made )
So we are supposed to deliver the Material worth value of 60 Lacs.
The First sale order worth 60 Lacs has been unblocked in VKM3. Now at the time of Delivery level why would you want to chekc the Credit limit again ? It has already passed the credit check.
It is not necessary to check credit limit . Because you have already performed the same at the order level.
Now the customer has come again and raised another sale order for 80 Lacs. The System would block him.
The system will never block the Previous delivery which you are, due for delivery to the customer.
If we keep on checking the Credits without delivering we would end up only raising in Sale orders and no Delivery to the Customer at all. The Debit side of his account will always be 0.
So i donot think Static and dynamic is needed . you can go for either Static or Dynamic.

How to resolve an issue of static and popping noises on my iPhone 4S?

I just begAn to experience static and popping/crackling noises when on a call. This doesn't happen on speakerphone. I have had the phone for 13 months.

Hi Tin Knocker,
Thanks for visiting Apple Support Communities.
If you've started to hear static or crackling through your iPhone speaker, the troubleshooting steps in this article can help:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Cheers,
Jeremy

HT201471 I updated my iPad 2 (model A1395) to IOS 8 and all the colors changed and the photos are like negatives. why? and how do I fix it?

I updated my iPad 2 (model A1395) to IOS 8 and all the colors changed and the photos are like negatives. why? and how do I fix it?

Looks like someone changed setting in iOS8.
Change this setting.
Settings -> General -> Accessibility -> Grayscale or Invert Colors

Mixing static and dynamic content in a single outputText value causes NPEs

Hi,
I am having a problem and I'm wondering if it is a result of my error or if this is a bug.
I am mixing dynamic and static content in the value attribute of tags (e.g., outputText). On initial page load, everything works fine. However, if the same view is reloaded (e.g., after a failed validation) I get an NPE from JSF:
[#|2006-10-24T08:49:03.756-0500|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=12;|StandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
java.lang.NullPointerException
        at com.sun.faces.el.MixedELValueParser.getNextToken(MixedELValueParser.java:140)
        at com.sun.faces.el.MixedELValueParser.parse(MixedELValueParser.java:123)
        at com.sun.faces.el.MixedELValueBinding.getValue(MixedELValueBinding.java:60)
        at javax.faces.component.UIOutput.getValue(UIOutput.java:147)
        at com.sun.faces.renderkit.html_basic.HtmlBasicInputRenderer.getValue(HtmlBasicInputRenderer.java:82)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.getCurrentValue(HtmlBasicRenderer.java:201)
        at com.sun.faces.renderkit.html_basic.LabelRenderer.encodeBegin(LabelRenderer.java:128)
        at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:683)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:443)
        at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
        at com.sun.faces.renderkit.html_basic.GroupRenderer.encodeChildren(GroupRenderer.java:130)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
        at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
        at com.sun.faces.renderkit.html_basic.GroupRenderer.encodeChildren(GroupRenderer.java:130)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
        at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at javax.faces.webapp.UIComponentTag.encodeChildren(UIComponentTag.java:609)
        at javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:546)
        at com.sun.faces.taglib.html_basic.PanelGridTag.doEndTag(PanelGridTag.java:460)
        at org.apache.jsp.registration_jsp._jspx_meth_h_panelGrid_0(registration_jsp.java:324)
        at org.apache.jsp.registration_jsp._jspx_meth_h_form_0(registration_jsp.java:223)
        at org.apache.jsp.registration_jsp._jspx_meth_f_view_0(registration_jsp.java:157)
        at org.apache.jsp.registration_jsp._jspService(registration_jsp.java:118)
        at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
        at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:336)
        at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:297)
        at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:247)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
        at sun.reflect.GeneratedMethodAccessor188.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
        at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
        at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
        at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
        at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
        at java.security.AccessController.doPrivileged(Native Method)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
        at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:723)
        at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:482)
        at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:417)
        at org.apache.catalina.core.ApplicationDispatcher.access$000(ApplicationDispatcher.java:80)
        at org.apache.catalina.core.ApplicationDispatcher$PrivilegedForward.run(ApplicationDispatcher.java:95)
        at java.security.AccessController.doPrivileged(Native Method)
        at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:313)
        at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:326)
        at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:132)
        at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
        at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:248)
        at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
        at javax.faces.webapp.FacesServlet.service(FacesServlet.java:194)
        at sun.reflect.GeneratedMethodAccessor202.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
        at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
        at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
        at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
        at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
        at java.security.AccessController.doPrivileged(Native Method)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
        at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
        at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
        at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
        at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
        at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
        at com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
        at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
        at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
        at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
        at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
        at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)My code looks like this:
<h:outputText escape="false"
          value='<link href="#{myBean.styleSheet}" rel="stylesheet" type="text/css" />' />If I replace this with a much more convoluted set of tags, it works:
<h:outputText escape="false"
          value='<link href="' /><h:outputText escape="false" value="#{myBean.styleSheet}"
          /><h:outputText escape="false" value='" rel="stylesheet" type="text/css" />' />So is the problem that I am mixing dynamic and static content with a single value? If so, why does it work on the first view, and not after?
If it matters, I'm using the reference implementation version 1.1 (as included with NetBeans 5.5RC2) on SuSE 10.0 w/ JDK 1.5_09.
Thanks,
Bill

Yes, that's how I originally had it, but then changed it to the outputText approach since a single tag could do what I wanted, as long as I was allowed to mix static and dynamic content within a single value.
I think this is a bug in JSF 1.1, since if what I am doing is illegal, it should throw an exception on the first page view, not work on first view and throw an exception on subsequent views. I'm guessing that this has something to do with the fact that on first page view it only runs the restore view and render response JSF phases, while on subsequent requests all of the phases will be run, and it's in one of those other phases that the exception is thrown.
For now, multiple tags is the work-around, I guess.
Thanks,
Bill

Purpose of declaring the method or class or static and as instance

what is the purpose of declaring a method in a class or the class itself as static.
Does it mean we cannot create a copy of that class or method if we declare it as static.
if so then why do they dont want that class to be created as a copy ?
Why do they want to declare a class as static
please provide some conceptual undersatnding regarding the static and instance class with one example

Static methods are often used for the implementation of utility methods. Please have a look at the class CL_ABAP_CHAR_UTILITIES for example.
You use the methods of this class in the same way as you would use a function in ABAP (like
LINES( itab )
). You use it in a static way because the functionality is always the same no matter in what context you are calling the function.
The purpose of instance methods is that their logic is in some way related to an attribute of the object instance that you use to call it.
For example, you create an instance of object PO (a purchase order) called MY_PO. Then the method
MY_PO->ADD_POSITION
would add a position to a concrete PO that has a unique number etc. But if the object has a static method DELETE_POSITION then it just deletes the current position of a PO, regardless on which concrete PO you are acting at the moment.
I hope this clarifies it for you.
Regards,
Mark

MacMini DVI colored static and KVM's

Similar Messages

Maybe you are looking for