MacMini server used as regular computer ?
I love the specs on the new MacMini server, and want to buy one. I see it comes with server software, and I know absolutely nothing about the Lion server software. I want to use this MacMini as a regular computer - I want to use it's first hard drive for Mac OSX, and the second hard drive to put Windows 7 on (running on bootcamp, directed from the first hard drive). However I know nothing of Lion server software. Can I disable the server part of Lion server, and use it as a regular computer, or do I have to wipe the server software off and put regular Lion or snow leopard OSX on it ? Any suggestions would be appreciated. Thanks
When you first start up the Mini Server, simply do not
enable any of the server services. And if you do by
accident do that, you can simply open the Server App
and disable it from there.
BTW, it does make a pretty nice workstation. Using one
myself with a Thunderbolt display. Also, if you decide to
get one, upgrade it to 8 gig right away. I put the following
in mine and works just fine and is currently only $40.99.
http://www.newegg.com/Product/Product.aspx?Item=N82E16820233215
Similar Messages
-
I cannot get to my regular computer as it is in storage, and therefore cannot back anything up. If I change over to icloud using someones else's computer will I lose all bookmarks, contacts and all things on the computer in storage?
You have a question for the iCloud support folks, I would imagine.
We handle questions about the Time Capsule, AirPort Extreme and AirPort Express in this area. If you have a question about one of those products.....we can probably help. -
Delete mail from server using ipad not computer
How do I delete mail from the server using my Ipad
That completely depends on your email service provider.
For gmail, for example, you would do this as follows:
Settings > Mail, Contacts, Calendars > [your gmail account] > Advanced > [Move Discarded Messages Into] Deleted Mailbox -
Could I use two regular computers (one acts master , another one acts as slave using the Ethercat Internet Card) to achieve realtime communication using the Ethercat and Labview Real Time Module? if it could, what hardware should I purchase from the NI ?
Thank you!Hi Xiaolin,
NI doesn't offer Windows based Ethercat master or slave software. Only LabVIEW RT can run the Ethercat driver.
However, you could use a LabVIEW RT target as an Ethercat master and use the Ethercat Internet Card with a slave PC (note: I think this will work from the Beckhoff description of the card you are describing. The card should integrate like any other non-NI slave. However I haven't tested the setup and don't advise saying it will work until you have tried).
You can use any NI RT target with two ethernet ports as the Ethercat master. This could be a cRIO, PXI or RT Desktop.
Jesse Dennis
Design Engineer
Erdos Miller -
Can't connect to server using a regular app
Tried to open a regular news app and does not let me connect. cant't connect to server, retry. I deleted it and added it again and still have the samek problem. My husband has an ipad 3 and not having the same problem, why? please help!
Hello Marysol,
Thank you for the details of the issue you are experiencing with your news app.
First, I recommend resetting your network settings on your iPad:
Reset network settings on your device by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
If you are still not able to connect, I recommend following the steps in this article (you can skip any steps you have already taken):
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I want to use a headless MacMini Server as a webhost for four sites.
I am considering trying the MacMini server to use as a webhost. I have a comcast business account with 5 IP's. It's an extreme connection speed package.
My sites would be:
2 Joomla! CMS sites,
1 WordpressMU Site,
1 SugarCRM site.
I am looking for something an idiot could install and manage. I'm using a hosting company right now, but would like more control of my OS.
I don't like the fact that Apple doesn't include phpMyAdmin as a standard package with Snow leopard.
I installed the above scripts on my macbook pro through MAMP and MAMP Pro, but all I can get is local access. The public cannot access my sites folder (regular snow leopard). So, I was told that I need snow leopard server to accomplish what I want to do. Can anyone help me figure out what I need, and how it's done?
WaltIt does sound like a simple port forwarding thing.
Do take care with that Comcast account. If my experience is any indication you will not get the advertised speed. If you read the agreement it is only guaranteed for the first few kilobytes or so of any transmission and then backs down to normal speeds afterward.
Comcast will also do you a "favor" and turn the firewall on by default in the supplied modem/router. You have to call them and have them turn it off if it interferes with anything. -
Converting a Server Back to a Regular Computer
Greetings!
I have an apple desktop that was being used as a server. I'm looking to convert it back to a regular computer but am not sure how to go about doing this. Any suggestions?
Thanks so much!What kind of server are you talking about and what does this have to do with software development?
-
Hi All,
I have Citrix VDI (Virtual Desktop Infrastructure) Implemented
in my company and installed few Applications on App Server lets say.... MS Office 2013, filzialla, putty, etc...
I assigned these apps to the users through CITRIX STUDIO, when I try to use these apps. on VDI everything is working fine only when i tried to open Word, Excel or Powerpoing, outlook it throws error as
""This copy of Microsoft Office 2013 cannot be used on a computer running Terminal Services" error message when you try to open the Click-to-Run version of an Office 2013 program or suite on
a terminal server"" and apps gets closed.
Please help me on this ASAP.
Thanks & Regards,
Sachin ShindeHi,
As mentioned in ths article below, run for Office 365 products on to a Remote Desktop Session Host server is not supported. You can install Office products for Office 365 to a virtual desktop, but the virtual desktop must be assigned to a single user.
http://technet.microsoft.com/en-us/library/jj219423(v=office.15).aspx
Regards,
Melon Chen
TechNet Community Support -
Hi,
When trying with Postman sending a REST call to Azure Storage Queues I get:
The MAC signature found in the HTTP request '***' is not the same as any computed signature. Server used following string to sign: 'POST.
The code I have for creating the Authorization Header:
var accountName = "my_account";
string key = ConfigurationManager.AppSettings["my_access_key"];
DateTime dt = DateTime.Now;
string formattedDate = String.Format("{0:r}", dt);
var canonicalizedHeaders = "x-ms-date:" + formattedDate + "\n" + "x-ms-version:2009-09-19" + "\n" ;
var canonicalizedResource = "/my_account/myqueue/messages";
var stringToSign = String.Format("POST,\n\n\n\n\n\n\n\n\n\n\n{0}{1}", canonicalizedHeaders, canonicalizedResource);
stringToSign = HttpUtility.UrlEncode(stringToSign);
HMACSHA256 hmac = new HMACSHA256(Encoding.UTF8.GetBytes(key));
var signature = Convert.ToBase64String(hmac.ComputeHash(Encoding.UTF8.GetBytes(stringToSign)));
var authorizationHeader = String.Format(CultureInfo.InvariantCulture, "SharedKey {0}:{1}", accountName, signature);
return authorizationHeader;
Anyone any idea what I'm missing/doing wrong?
Additional question: do i have to create for every message I want to send a new Authorization header? Or is there an option (as with Service Bus Topics) to create a header that can be used for a certain timeframe?
Thanks.One issue is with this line of code:
HMACSHA256 hmac = new HMACSHA256(Encoding.UTF8.GetBytes(key));
Please use the following:
HMACSHA256 hmac = new HMACSHA256(Convert.FromBase64String(key));
and that should take care of the problem.
Regarding your question, "do i have to create for every message I want to send a new Authorization header? Or is there an option (as with Service Bus Topics) to create a header that can be used for a certain timeframe?"
With your current approach, the answer is yes. What you can do is create a Shared Access Signature on the queue which will be valid for certain duration and then use that for posting messages to a queue using simple HttpWebRequest/HttpWebResponse.
Hope this helps. -
Which attached storage you are using for your Macmini Server?
Hi all,
I am very confusing to choose a right attached storage for my small office use - with my Macmini server - for storage shared files, documents...
My intend is to select one with:
- Firewire 800 connection (2 is best)
- 2 internal disks so I can make RAID 1
- Do not need any manual operating like turn on, turn off when power Mac down, up or electricity down, up
- Quiet
- Not make a lot of heat
I read many review of product as Buffalo, WD, Drobo, Promiss... but I still not quite convince before make an order. Each products has some weak points (as I understood through review):
- Promiss: can not power on it self after electricity down and back, so this means we need a person to manually turn it on after that.
- Drobo: noisy and bad quality?
- WD: has some problem to maintain mount (through firewire) when reboot macmini?
- Buffalo: I preffered this one but it do not have Firewire, only USB 2.0 and I afraid this is not enough for my sharing files purpose.
So please share you experience and help me to choose the best, thanks!Thanks!
I just bought 2 Buffalo box (single disk), I will try to buy Drobo box for a RAID soon!
BTW, do you have problem when restart server when use firewire connection? -
Use MacMini server for windows apps and save for windows files ?
My question : Office equiped mixed computers , aslo Windows and Mac,
Could we use MacMini server for both machines, working by windows apps and / or to save and work with windows files on MacMini server and with Mac as well?
We woud use it for normal office work and get it by internet from other places as well
windows apps: merchandising, invoice, word, excel, pictures editing, Outlook Express + the Mac apps
thnx ,
MACIrenIn general what you can do is: in OS X, use Windows in virtualization (aka emulation), as a "virtual machine" with VMWare Fusion, Parallels, or Oracle VM Virtual box.
That way you have both operating system open side by side without having to reboot into one or the other operating system.
Not sure whether you need a Mac Mini Server per se to do that, I do that with my MacBook Pro for instance. But the server would help since it has a quad-core CPU (more cores that you can dedicate to the virtual macine), and you can put the virtual machine on the second harddrive for better disk access performance. Was there some particular reason you were thinking of the Mini Server -- do you want to use server side Windows apps?
Again I have that setup on my MacBook Pro using VMWare Fusion with an XP virtual machine. In the Windows, I only use Office 2003 and some company apps that are Windows only. With Fusion (and I'm sure the other apps can do it as well) you can set a "shared" folder so both Windows and Lion will see the contents of it for reading and writing. I believe with Fusion you can also do your entire Home directory, but I prefer to limit it to a single shared "work" folder. -
Considering a Dell U2711 for MacMini Server
Hi All,
I am planning to buy a MacMini Server to go with my Dell U2711 Display.
I am a bit confused regarding the means of connecting the Display to MacMini for running at 2560 x 1440 resolution.
Apple tells on MacMini specifications page, that output through HDMI is limited to 1920-by-1200.
That said, I am left with the "Thunderbolt" way to achive the native resolution of 2560 x 1440, right?
So, what cable should I use to connect the display through thunderbolt port?
Some articles suggest using the so called "Mini DisplayPort to Dual Link DVI" Cable to do that, but then isn't is a misleading naming for a thunderbolt cable?
I would expect something like a "Thunderbolt to Dual Link DVI" cable.
Thanks!Iam buying this model, have tou tried 1080p videos external monitors anf full hd flash videos from vimeo?
please let me know
siaco wrote:
Just though I should fill in a bit here, as I have now bought this laptop and running Arch 64bit on it. So if any other users are considering this laptop, here are a few lines about it:
I have it up and running with LUKS disk encryption, everything works fine so far. I'm running XFCE with just a minor problem that the bottom panel is kinda blinking 3 or 4 times right after boot. Havn't tested webcam nor bluetooth, but sound and everything else seems to work fine.
Two of my biggest problems were to get the wifi up and running and to get an acceptable performance when viewing videos in full screen. As for the wifi; just me not understanding that I needed a kernel module AND a firmware.. (If someone wants to fill me in on why we need a firmware AND a kernel module/ driver, I'd be glad.) I installed the iwlwifi-5000-ucode without knowing I also needed the iwlagn module too. After that was fixed, I am now using network manager with no problems.
I have also had some problem with the Radeon 3670. The performance was bad in full screen videos when I used the xf86-video-radeonhd. (I followed arch wiki). It didn't help to use vide-ati neither, and no settings in the xorg.conf did fix my problem. I also noticed that DRI was failing in xorg.log. After alot of trying I decided to try the git-versions which are found in the AUR. I'm happy to say that I can now watch 720 (the only video resolution I have tried yet) with acceptable quality
All in all, I'm quite happy with the computer so far. A bit warm maybe. Oh, and the screen (full HD version) is SOO nice :-) -
I just bought a MacMini Server
I just bought a MacMini Server. I moved our company's website to it successfully. However, I'm currently using GoLive 9 to edit the .html files on a separate computer running Snow Leopard currently. Some of the images aren't coming through on the Lion MacMini Server now. Before I hook the server up to the network replacing the old server, when I do this and the .html files on the server can see the computer where I do the editing of said .html files will the files' referencing Photoshop Smart Objects of GoLive fix this? These .html files do keep looking for the .psd files that are on the external hard drive of the editing computer. I would ask the Adobe Discussion Group but the login feature of that site is not working. Thank you so much for your help in advance! :-)
Problem solved & it runs like a charm! For all who contributed solutions thanks for your help! :-)
-
How can we update data in LDAP server using PL/SQL.
Hi,
How can we update data in LDAP server using PL/SQL program.
Is there any sample code for refrence.
Thanks,
TarunHi Justin,
Thanks for your help. You got my correct requirements.
Tim's example returning all the attributes of current user which is admin user. Please correct me if I am wrong.
I have the following information:
the admin user and password,server info , port and ldap_base for admin.
I have uid and password for regular user, I am trying find the ldap_base for regular user, which may be different from adminuser.
Please help me.
Thanks,
Edited by: james. on Jan 12, 2009 5:39 PM -
Hi,
When the page is submitted for approval by using SharePoint OOTB Page Approval Workflow, it takes quite long time and prompt error message as below.
"The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailable.
If this problem persists, contact your network administrator."
It only happens in Internet Explorer version 8 and 9. IE version below 8 is not used in environment.
But it is working in Firefox.
Please help me on how to fix this issue.
Thanks.Hi Htet,
Here are some articles with the same issue message, you can check the setting of Link Translation rule in the ISA from below.
http://sharepointontop.blogspot.com/2012/06/form-cannot-be-submitted-to-web-server.html
http://bytelab.blogspot.com/2008/03/problem-submitting-infopath-forms-using.html
http://social.msdn.microsoft.com/forums/en-IE/sharepointcustomizationprevious/thread/84be34b3-b806-49ce-a5c2-b5ad8a1ff09f
Thanks
Daniel Yang
TechNet Community Support
Maybe you are looking for
-
How can I redirect the library to look at another drive
I have an mp3 collection which has outgrown my hard drive. It is in a folder on the desktop with subfolders (representing albums) which contain the mp3s. My modus operandi is to drag and drop album folders into the playlist window which creates a pla
-
How do i get photos from my laptop onto my i touch 2nd gen
ive synced the photo file from my laptop of pics i want on there. shared it with apple tv. but no pics in my photos section on my i touch?
-
Hi I need to sum values for different CD_INDICATOR, same CD_CUSTOMER , same NM_CYCLE , same CD_STRUT, same PROFILE CD_STRUT NUMBER(6) NM_CYCLE NUMBER(6) C
-
Hi All have the SAP Notes for executing a equerry in background. I am not able to analyses the Note. Can any one please help me on this. It is really urgent. Following is the Note details. *Note 537735* - SAP Query: save to file in the background Not
-
Right click with mouse in Word 2013 does not give the list with translate and synonyms etc
since i upgraded to windows 8.1 right click on words in word 2013 does not open the regular list where you can tap on synonyms and translate. it does work if i touch the screen. i moved to mouse mode but it does not help can anyone help... i am sta