MacOS 10.9.3 Update breaks Resolve/OpenCL for MacPro 6.1 D700

Best software to test with is Resolve. (uses OpenCL (GPU) very much).
Well, for us it hangs way before rendering. When working with nodes (serial , circle and outside) all of a sudden, it hangs a little, now the monitor stops outputting, when selecting a new clip, the viewer does not update... Now I just save (and that takes a long time as well), then quit, and I have to reboot, because other programs starts to hang as well. Managed to make a 10.9 install on a MacBookPro, updates to 10.9.2 and started my MacPro from this systems. All ok. Shame on you Apple!
/helge

It's a known bug with Resolve and 10.9.3.
Unfortunately no one is yet sure whether the bug is on BlackMagic's side or Apple's side.
http://forum.blackmagicdesign.com/viewtopic.php?f=11&t=22527

Similar Messages

Did OS X Mavericks v10.9.4 update break bluetooth audio for anyone else?

Did OS X Mavericks v10.9.4 update break bluetooth audio for anyone else?
I have a 2.4GHz Intel Core 2 duo MacMini from 2010, and I just updated to the latest OSX (10.9.4 (13E28)) and now bluetooth audio is broken.
I can pair my device (LG Tone+) to the mac, but no audio will play though it. I've rebooted the machine, reconnected the device after the update, restarted the browser, all with no results.
Typically, when I connect to the system I will get audio acknowledgements through the headset, "Power On" "Battery High" "Connected"
I still get those audio queues through the device. However when I open up a video on YouTube, or attempt to stream music on Spotify...nothing happens.
I've plugged wired headphones into the system and that works just fine. When I connect my Bluetooth headset, the audio to the wired headphones disconnects, so it seems like everything is behaving normally, except that no audio plays through the bluetooth headset.
Any ideas on where to go from here would be greatly appreciated. So, what do we think?

Try resetting the SMC.
Barry

Air 1.5 update breaks Air apps for Linux

The beta version of Air worked fine, but after updating to
Air 1.5, apps will no longer run or install. The installer says the
air files are damaged. I've tried uninstalling everything &
reinstalling. I don't suppose the beta version is still available?
Using current Ubuntu (8.10).

Hey.. Turns out I wasn't completely removing everything that
needed to be removed in order to install AIR 1.5 properly. Check
out the steps here.. It should work for you
http://tr.im/2g14

Raw update breaks camera support for Fuji X10 raw file.

Just a headsup, do not update!

Only Apple can asnwer the "Why?" questions, I'm afriad.
Aperture menu -> Provide Aperture Feedback and let them know you want it.

What are the things 10.6.8 update break?

After the 10.6.8 update I am having so many issues,
first, the %100 cpu usage of dock, disabled parallels, and now it is ok,
then, a reboot and I am unable to login, I enter my password, it begins the login process, then logs me out,
if I persist, it logs me in after a couple of tries, but each time a few of my applications are missing at random, and the environment is very very unstable, sometimes I see no desktop background, sometimes I start firefox and I am logged out again.
I've seen some people suggesting removal of login items to resolve a similar but not the same issue, so I'm inclined to think overall, there is an issue with some applications which 10.6.8 update breaks.
For starters my login items are:
GrowlHelper
Geektool
EyeTv Helper
Canon IJ Network scanner
ituneshelper
Magicprefs
Sophosuiserver
Does anyone have any problems with any of these?
I only verified the parallels desktop 6 issue up to now.
Model Name: MacBook Pro
Model Identifier: MacBookPro6,2
Processor Name: Intel Core i7
Processor Speed: 2.66 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 4 MB
Memory: 8 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MBP61.0057.B0C
SMC Version (system): 1.58f15

Actually it is not-so-permitted to remove sophos for this machine, but I did it anyhow. No problem so far, but lack of evidence is not evidence of being lack of something so I am not adding it to the list yet

My AppStore id is my apple id n password which is good when purchasing. But when I am updating from update option it ask for a password. The user id I see there is not mine, it's different. How do I change that to my apple Id? Please help me resolve .....

My AppStore id is my apple id n password which is good when purchasing. But when I am updating from update option it ask for a password. The user id I see there is not mine, it's different. How do I change that to my apple Id? Please help me resolve this issue. I have tried resetting it but nothing... Either I'm doing something wrong or....

I believe the issue is with the Apple ID that was used to purchase the App. If you download an App that was purchased under a different Appple ID then all updates will also be linked to the original purchaser's Apple ID. Your Apple ID is the the same ID as your iTunes, iCloud, etc. Some folks use different ID for the different Apple sites. No need for that One ID for all Apple Sites, and if someone else buys an App using their ID and they(you) download that App onto your device and that App requires an update it will ask for the purchasers Apple ID. This happens a lot when folks sell their iPad or give it to someone else and leave some purchased(free) Apps on the iOS device. You cannot change the original ID the App was purchased under. A suggestion would be if someone else has an App that you like but do not want to pay for use their ID or in the future have them gift the App to you.

Why can I no longer use AirPlay with my Slingbox? New updates break complatibility?

Why can I no longer use AirPlay with my Slingbox? New updates break complatibility?

You already seem to know what the issue is, it is the parallax feature that was added to iOS 7. From your rant, it appears that your attempt to work around this was not successful. According to the Apple documents I've seen, they recommend that you enlarge your image (not reduce it). Make your image have excess space on all sides, which is not displayed on the screen. This way, when you tilt your device one direction or another, it can shift the image to give the appearance of 3D.
As a photographer, I like to use the full frame of my images, but I also know that I need to leave room around the image as well. I have some photos I have taken that I can't use because I have them cropped too tightly too, but I have others that work just fine. Just remember that part of the image file is "off screen" so that if iOS has to shift the image up it has some image that can scroll onto the screen. It needs this space on all sdes, so just make youre images larger, and keep in mind that a portion on each side will be outside the normally visible screen... If you don't like this feature, you can always go into the settigns and turn it off.

Mac OSX 10.4.8 Update Breaks Raid Striping -- System will no longer boot

Hi,
I'm a newbie from the PC world with a Mac Pro. For the last 8 hours I've been trying to get a Raid-0 configuration to work with no success.
The Raid array constructs ok and the system boots. Once that's done the Software Update screen arrives and I would select install all... then the machine would not boot. I get a Grey Shade like affect and the message to power off and restart. Powering off does nothing.
So I started again for the Nth time and added each Software Update individually. All loaded and rebooted successfully until the 10.4.8 Update.
As soon as that loads, installs and restarts the machine will not boot.
I called Apple's Tech Support and they told me they do NOT support RAID on this machine. I said what are you talking about. They put me on hold talked to a supervisor and came back with the same story. I just don't get it...
So anyone have any insight and advice on why the update breaks my Raid-0? What can I do to get over the problem (I'd like to have the RAID...)?
Thanks for the assistance.
Mac Pro Mac OS X (10.4.8)

Yes, you needed an emergency boot drive anyway to repair your RAID boot drive. Just use the same one in addition to a working clone or backup of your regular system.
Apple made it easy to install or update security updates and system updates from an alternate drive (but you will have to use the stand-alone (combo preferably) updaters instead - which many use already as normal part of upgrades for years now (they seem more useful and reliable).
My preference is a dedicated boot drive with OS and apps and minimal home directory - no media files - and fast, like 10K Raptor. I use RAID for my home directory so it isn't on the boot drive for years to improve performance and keep the OS separate. Never a problem and nice mix.

HT4623 Do you have any update which resolve the "No Service" issues on the iPhone 4 and 4S?

Hello!
I am from Sweden. Using iOS 6.0.1 on iPhone 4S. I ordered this iPhone hopping that you have resolved this issue " No Service". I had this problem on my iPhone 4 and that is the reason why I ordered this one. The sim card is now totally blocked for the 5th time. Even on iPhone 4S am having the same issue. Do you have any update which resolve this problem? If not what do you want me to do? All our employees are using iPhone and if this issue is not resolved, we are planning to stop all orders from Apple. Please let me know as soon as possible. My E-mail is [email protected] Thanks!
/Elishah

You are not talking to Apple here; we are users like yourself.Apple does not monitor this forum and will not respond as this is a user-to-user forum.
Did you contact your carrier? It sounds as if it is a carrier problem.

How do I get the updates that refernce "Install this update to resolve issues in Windows." installed automatically?

On Intune, I'm not certain what to tick off that will install the updates on Windows 7 that reference at the beginning of it's description line... "Install this update to resolve issues in Windows." The only way that I can get this to prompt
for install is to manually run Microsoft Update. Equally odd is that when you run MU locally, these updates are detected and referenced as optional -- for example, 17 optional updates are available. But when you click on that link to review
these available updates, in the right pane detail for each update they are referenced as recommended.

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Hello, I just wanted to know when an update would be available for my mac mini server os x lion to resolve the issues regarding my m-audio fastrack pro usb audio interface (no midi messages recognized)

Hello, I just wanted to know when an update would be available for my mac mini server os x lion to resolve the issues regarding my m-audio fastrack pro usb audio interface (no midi messages recognized)

Have you reported your problems to Apple?
BugReporter
<http://bugreporter.apple.com>
Free ADC (Apple Developer Connection) account needed for BugReporter.
Anyone can get a free account at:
<http://developer.apple.com/programs/register/>
And/Or
Mac OS X Feedback<http://www.apple.com/feedback/macosx.html>

Hello,so I didnt update the ios 8 for my Iphone 4s yet the phone is friggin slow and the apps break down all the time,also the memory is completely full even tho I deleted half of the storage.Its been happening for over a month,what to do ? Thanks !

Hello,so I didnt update the ios 8 for my Iphone 4s yet the phone is friggin slow and the apps break down all the time,also the memory is completely full even tho I deleted half of the storage.Its been happening for over a month,what to do ? Thanks !

Mullaly75 wrote:
I assume u guys don't understand what open source software is
Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
from http://en.wikipedia.org/wiki/Open_source_software
Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data.

The latest Java update breaks some vital applications

The latest Java update breaks some vital applications. I have reverted back to 7u45. But now, every time a java applet is used, the "later", "block", "update" window appears and stops the applet from loading. I must have this older release. Oracle does not throughly test their updates. Note: the apps the update breaks are actually Oracle apps.
I have checked the "do not ask again until next relesse" box every single time. Worthless.
Is there a way to stop Java version checks? I even have the box deselected for check for updates; ignored by OS X. I WANT CONTROL! Stop checking!
Ideas?

We are facing the same issue. We suggested all out customers not to install the updates Java 7u65 or 8u11 until there is a workaround or fix.
The wrong look & feel is causing the following problems:
- Either icons or text can be display on a button. Currently the majority of buttons are displaying an icon. Therefore the workaround is to set the text at least.
- Scroll-bars are displayed within all cells of a table column. The circumstances are not clear when these scroll-bars are displayed.

When will there be an itunes update that resolves the compatibility issues with windows 8

When will there be an itunes update that resolves the compatibility issues with windows 8

I hadn't heard there are issues. Can you tell me what the issues you have run into are? I just downloaded it yesterday on my new laptop and I am having issues syncing today...

ITunes 11.3.1 update breaks iTunes on my mac.

iTunes 11.3.1 update breaks iTunes on my mac. iTunes window will not display following update.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

MacOS 10.9.3 Update breaks Resolve/OpenCL for MacPro 6.1 D700

Similar Messages

Maybe you are looking for