MacOS 7 cannot find Unicode Converter

Trying to launch a Classic application on MacOS 7.0, we get the message "Cannot start application. Cannot find Unicode Converter." Is it possible to obtain whatever it is the System is actually looking for? Or can the System be faked out on this issue? It is a graphics application; I don't really care about text issues.

Unicode was introduced to the Mac OS in a version of Mac OS 8 if my faulty memory recalls correctly. It will be a system extension more than likely but also more than likely NOT called "Unicode Converter".
If you can figure out what library file to use, you can put a copy into the extensions folder on your System 7 machine and see what happens when you start your application.
But I suspect that your system will simply crash if you try this. It nay not even boot.
Gary

Similar Messages

Cannot Find File - Convert higher bitrate songs to 128kb AAC on an iPhone??

I ran out of room on my iPhone 3G, so I checked the "Convert higher bitrate songs to 128kb AAC" option. I had already made an 'iPhone' playlist as the only playlist synched with iTunes, and the playlist reduced its iPhone footprint by roughly 25%. It worked well except for several songs that "could not be found" by iTunes. These are all songs for which I have the CD, and play perfectly in iTunes (and on the iPhone before the conversion).
I have tried deleting the songs from my 'iPhone' playlist, iTunes, and my hard drive and reinstalling from the CD (first to iTunes then to the iPhone playlist) - ALL with reboots and permission repairs between reinstalls. These 13 songs seem to be impossible to convert, despite several other songs from the same CDs converting perfectly!!!
After each attempt, iTunes goes through and re-evaluates the gaps, which takes time. This is not a problem, I just note it for diagnostic purposes.
How do I resolve this perplexing and vexing conversion problem? The songs ARE on the hard drive, and iTunes CAN find them (because they play in other playlists and played before the conversion) they just do not seem to convert.
Help!

Everything is up to date, except for the security patch released yesterday. That is on the list for a 'today task' but I have not gotten to it yet.

Cannot find raw converter plug in for CS3 / Nikon D90

I was adviced to go to adobe.com and make a search for raw converter, and that gave me hundreds of results, but no converter plug in,
Can someone give me a direct link
Thanks

You want the DNG converter from here
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4365
It is not a plug-in but a standalone program which converts raw files to the DNG format that can be read in PS/Bridge.

Since the latest ITunes update, I cannot find all the CD songs I converted to ITunes. All it shows are the songs I purchased.

Since the latest ITunes update I cannot find all the CD songs I had converted into playlists. All I can find are the songs I bought on ITunes.

Hello jerryfromil,
I've found an article that may help get your content back into iTunes.
No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
All the best,
Allen

My laptop cannot find my printer

Hello - my OS is Windows 7 Home Premium and my printer is HP Officejet 4630. Both laptop and printer are connected to my wireless router, but my laptop cannot find my printer. I have gone through all of the instructions given on both the CD setup that came with the printer and online setup (several times). What am I missing?

Hello me-n-oc,
Welcome to the HP Forums! I understand you are unable to connect the Officejet 4630 wireless during the installation. Please follow this HP document on 'Unable to find printer' Error Message Displays on the Computer During a Wireless Network Installati...
If these steps don't resolve your issue, then try connecting this printer over a USB cable. Next, please follow this HP document on Convert from a USB connected printer to wireless.
Let me know how your progress goes.
I worked on behalf of HP.

ITUNES 7.0 - I cannot find an answer to this anywhere? I NEED HELP

On certain albums, my computer rearranges whichever song is playing to the first position on the album, but the track number stays the same. It then proceeds to play the album reordering the songs, which often results in the same songs being played over and over. It only does this with certain albums though, and I cannot find a way to fix this. It never did it in iTunes 6, but whenever I updated to the newest version, it started. I have posted 2 previous posts about this and nobody has responded saying they know what to do. I also cannot find an email address to email apple support at. SOMEBODY PLEASE HELP ME

I think I solved the problem. I think iTunes somehow named an "Album Artist" in addition to the "Artist" (or stripped the Album Artist from the other tracks). The trick here is to use Get Info to see what is different about the odd track. I'm ashamed I didn't use this diagnostic technique earlier. Anyway, deleting the text from the offending song fixed the problem.
I think I must have converted the song to the protected format some time ago, just to try it out.
I'd ask you to re-upgrade to 7.0.2 just to see if this works. If it does, you may want to mark this question as answered.

Upgrade from server 10.4.11 to 10.5 cannot find OS

Greetings all,
I have an Xserve running 10.4.11 and I am trying to upgrade it to 10.5. When I run the setup assistant it initially doesn't see the OS RAID partition (two 500GB drives, RAID level 1). If I open the disk utility and select the parent of the RAID partition, the disk becomes visible in the select target screen, however after it runs through the installation pre-calculation I get a message telling me that the setup assistant cannot find OS X on the installation target.
I am at a loss here, the mirror is healthy and works properly but I cannot get the installer past this point.
The only offhand thought I have is that it might have something to do with the RAID version--Disk Utility tells me that the mirror is "Version 1.0" and gives me the option to update to version 2.0) but even after several hours worth of searching I can't find any information on this distinction and I am not about to try it if there is a chance that the upgrade still fails and I'm left with a 10.4 install that cannot boot.
Any thoughts or ideas would be immensely appreciated, thanks in advance.

I had similar problems upgrading same configuration even after converting to version 2 RAID sw.
I think I cloned boot drive to non RAID ext. drive, did the upgrade and cloned back to freshly in 10.5 configured RAID 1 setup.
Your milage may vary. diskutil (man diskutil) can be used to convert RAID v1 ->v2.

App-v 4.6: cannot find the file specified

Hi,
Please see my previous
post.
In short: an application needs Internet Explorer activex, then a plugin for Excel. My App-v package is working (Internet Explorer opening), but the Excel plugin does not work. It says "cannot find the file specified".
I copied the excel shortcut from start menu to q:\packagename.
Please advise.
J.
Jan Hoedt
In .osd file of Excel plugin, there is the following:
    <CODEBASE HREF="RTSP://%SFT_SOFTGRIDSERVER%:554/WindowsX64/Application/1.0/excelplugin.sft" GUID="9FA88591-089E-4E57-89D5-C23239E83238" PARAMETERS="" FILENAME="%CSIDL_PROGRAM_FILES%\Microsoft Office\Office12\EXCEL.EXE"
SYSGUARDFILE="applic.001\osguard.cp" SIZE="305879730"/>
       <WORKINGDIR>%CSIDL_PROGRAM_FILES%\Microsoft Office\Office12</WORKINGDIR>
The CSIDL_PROGRAM_FILES%, is that correct? If not, can I change it and how? Should I then reimport the package?
I might have found a solution but please advise:
http://blog.gridmetric.com/2011/09/26/possible-caveats-in-mixing-32-bit-and-64-bit-app-v-packages-and-environments/
Office is x86, so I probably should change the %CSIDL_Programfiles% to %programfiles(x86)%?

Changing CSIDL_PROGRAM_FILES to %programfiles(x86)% is worth a try.
A common reason for that 'cannot find the file..' error message also often can be resolved by removing the Workingdir entry (<WORKINGDIR></WORKINGDIR> or just <WORKINGDIR/>.
The way to apply the change depends on your deployment scenario. With an App-V Management Server (and for a test packae) you could modify (a copy of) the original .OSD file in the content share. Make sure you save with 'save as' and then 'Unicode'. Then
re-initiate a Server Refresh from the client, that should download the new OSD.
You also could - if it is permitted - create a copy of the client-local copy of the OSD file (you can figure that out with the Client Management Console). Double-Clicking that modified copy could do the trick.
If you use another deployment method (SCCM, MSI) you would need to moify the OSD file using the App-V Sequencer.
Whatever method you use during troubleshooting: For the 'final' pacage you should open the original package on the Sequencer ('Edit'), make the changes there and re-save + re-deploy the package. This makes sure that all information is consitent across the
various App-V files
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

"System cannot find the path specified" error message !HELP !

Hi
In doing a program to read a string from the buffer, I am getting an error message that says "cannot find the file specified"
The file was created in a previous program and I verified it does
exist at the specified location on my hard disk.
Below is the "ReadAString" program and "WriteAString" program where the String was created.
Thanks
Joe
import java.io.*;
import java.nio.ByteBuffer;
import java.nio.channels.FileChannel;
public class ReadAString
public static void main(String[] args)
File myFile = new File("C:Documents and Settings/Gateway User/jbproject/ssd_ch10p407/src/ssd_ch10p407/charData.txt");
FileInputStream myInputFileInAStream = null;
try
myInputFileInAStream = new FileInputStream(myFile);
catch (FileNotFoundException e)
e.printStackTrace();
System.exit(1);
FileChannel myInputChannel = myInputFileInAStream.getChannel();
ByteBuffer myByteBuffer = ByteBuffer.allocate(48);
System.out.println("\nNew buffer: \tposition = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
try
//size() will return the length of the file
System.out.println("\nFile contains " + myInputChannel.size() + " bytes");
//The FileChannel object keeps track of the file's current position
System.out.println(
"The file's current position before the read into the buffer is: " +
myInputChannel.position());
while (myInputChannel.read(myByteBuffer) != -1)
System.out.println("\nBuffer after read: \tposition = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
System.out.println(
"The file's current position after it read into the buffer is: " +
myInputChannel.position());
System.out.println("\nString read: " +
( (ByteBuffer) (myByteBuffer.flip())).asCharBuffer().
toString());
System.out.println("Buffer after flip: \tposition = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
// set the limit to capacity and the position to 0
myByteBuffer.clear(); //clear the buffer for the next read
} //end of while loop
System.out.println("\nEOF reached.");
myInputFileInAStream.close(); //close the file and the channel
catch (IOException e) {
e.printStackTrace(System.err);
System.exit(1);
System.exit(0);
import java.io.*;
import java.nio.*;
import java.nio.channels.FileChannel;
//This program takes a text phrase (in Unicode characters;(2 bytes each character)
//and puts it into a buffer via a CharBuffer,
//then loads the buffer contents into a file channel
//then outputs to a file.
//When you have successfully run the program, go to Start | Search |
//type in "charData.txt" and examine the contents of the file. OR
//go to the notepad and open
// C:
//Documents and Settings
//GateWay User
//jbproject
//ssd_ch10p407
//src
//ssd_ch10p407
//you should see charData so right click on it and choose "open with " "Notepad"
// and verify the contents are "Garbage in Garbage out"
// each time you run the program, "Garbage in Garbage out " should be concatenated.
public class WriteAString
public static void main(String[] args)
String phrase = new String("Garbage in Garbage out\n");
String dirname = "C:/Documents and Settings/Gateway User/jbproject/ssd_ch10p407/src/ssd_ch10p407";
String filename = "charData.txt";
File dir = new File(dirname);
//now checkout the directory
if (!dir.exists()) {
if (!dir.mkdir()) { //.....create it
System.out.println("Cannot create directory: " + dirname);
System.exit(1);
else if (!dir.isDirectory()) {
System.err.println(dirname + " is not a directory");
System.exit(1);
//create the fielstream
File myFile = new File(dir, filename);
FileOutputStream myOutputFileInAStream = null; //place to store the stream reference
try
myOutputFileInAStream = new FileOutputStream(myFile, true);
System.out.println("File stream created successfully");
catch (FileNotFoundException e)
e.printStackTrace(System.err);
ByteBuffer myByteBuffer = ByteBuffer.allocate(1024); //ByteBuffer object created
CharBuffer myCharBuffer = myByteBuffer.asCharBuffer(); // create view buffer
//transfer the phrase to myByteBuffer via mycharBuffer
myCharBuffer.put(phrase);
//update myByteBuffer limit (position times 2 because each Unicode
// character takes 2 bytes) to store in the ByteBuffer
myByteBuffer.limit(2 * myCharBuffer.position());
System.out.println("myCharBuffer position is " + myCharBuffer.position());
//create the file output stream channel object
FileChannel myOutputChannel = myOutputFileInAStream.getChannel();
System.out.println("new buffer: position = " +
myByteBuffer.position() +
"\tLimit = " + myByteBuffer.limit() +
" \tcapacity = " + myByteBuffer.capacity());
//each time the program is run, the phrase is again loaded into the buffer.
// Run the program several times and open charData.txt to verify that the
//data went into the file.
//Load the data into the buffer
for (int i = 0; i < phrase.length(); i++)
myByteBuffer.putChar(phrase.charAt(i));
System.out.println("Buffer after loading : position = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
myByteBuffer.flip(); //flip the buffer ready for file write
System.out.println("Buffer after flip: position = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
//write this file
try
myOutputChannel.write(myByteBuffer); //write the buffer to the file channel
System.out.println("The file contains " + myOutputChannel.size() + " bytes" +
" Do you see this number double every time you run the program?");
//you should see 48 characters writen to the file each time (phrase has 24 characters)
myOutputFileInAStream.close(); //close the output stream and channel
System.out.println("Buffer contents written to file");
catch(IOException e)
e.printStackTrace(System.err);
System.exit(0);
//After running the program once my output was:
//File stream created successfully
//myCharBuffer position is 23
//new buffer: position = 0     Limit = 46      capacity = 1024
//Buffer after loading : position = 46     Limit = 46      capacity = 1024
//Buffer after flip: position = 0     Limit = 46      capacity = 1024
//The file contains 46 bytes //Do you see this number double every time you run the program?
//Buffer contents written to file

Right - File is smart. Otherwise, you'd have to build
platform-specific paths by hand, using file.seperator,
to keep your code multi-platform. Ew.
Grant
IC..
Aldaris84 bows his head in honour of the man/woman that created the clearly intelligate File class
:)

"system cannot find the file specified" when launching a java app

Hi,
we are receiving an error message saying "The system cannot find the file specified" when launching a java app on a server. Exactly the same configuration on another server does not give the same problem.
The dialog box with the error message only presents one button - OK - and after pressing the button the app continues to run normally. This however is a big problem for us as we are trying to convert the apps into system services using the wrapper (http://wrapper.tanukisoftware.org).
Note: the problem exibits itself with and without the use of the wrapper.
I am not very comfortable about reinstalling the JRE on a production server. Is there any way to see what file it is missing? Debug options or something similar?
The JRE in question is 1.4.2_06. Many thanks in advance for your answers.

if not setting Post-Processing option results in a cryptic error why doesn't Adobe do one of at least three things?
1. Don't let user click Export on Export dialog if nothing's selected for Post-Processing.
2. Default Post-Processing to Do Nothing
3. Give the user a hint as to what the problem is when the error occurs instead of issuing cryptic error message.
Allowing this error to persist for so long is ridiculous.

My auto updates are not working. I cannot find where to download Camera Raw 8.1 for Photoshop CS6.

My auto updates are not working! I cannot find where to download Camera Raw 8.1 for Photoshop CS6 (Windows 8 64 bit). My Camera Raw is now at 7.1. I had the online Adobe folks tell me to just download all updates manually. That's great, yet I cannot find camera raw 8.1 to download...
Please help.
Thanks, Janet

there's a direct download link on this page: https://blogs.adobe.com/lightroomjournal/2013/06/camera-raw-8-1-and-dng-converter-8-1-now- available.html

HT1338 When I try to link my Macbook to my TV, I cannot find the "Arrangement" button that would lead me to "Mirror Display". Please help!

When I try to link my Macbook to my TV, I cannot find the "Arrangement" button that would lead me to "Mirror Display". Please help!

The Arrangement tab only appears in System Preferences Displays pane if a second display is recognized by the system (the OS). So it seems like your MacBook is not seeing the TV as being connected.
Describe the video connection between MacBook and TV... What type of video out port does your MacBook model have? How is it converted to the type of port used on the TV?

Ios simulator cannot find resource file in avTouch sample app.

Hi. I am trying to run the sample project avTouch in the iOS Simulator, and it cannot find the sound resource file sample. It compiles OK, launches, and when I click the Play button, it gives these errors in the iOS Simulator:
2011-08-28 14:16:17.454 avTouch[962:6c03] Error '!dat' trying to set the (null) audio devices' sample rate
2011-08-28 14:16:31.057 avTouch[962:207] Could not play file://localhost/Users/jonesbb/Library/Application%20Support/iPhone%20Simulator /4.3.2/Applications/20290DEF-8855-41E2-92D5-6CF06D6D58F4/avTouch.app/sample.m4a
The file does exist at that location, and I can open it and play it in QuickTime. I wonder if the path to that location may be the problem. Is it supposed to use "%20" instead of spaces in the path? Does the system resolve them into spaces?
I am using MacOS 10.6.8 on a MacBook Pro, XCode 4.0.2, and compiling for iPhone 4.3 simulator.
I've programmed a long time in other IDEs, but I'm new to XCode and all the libraries, so I'm probably missing something obvious here. Any suggestions will be greatly appreciated.

Additional info. The app runs and displays the name of the sound file, and also displays the duration of the sound, so I think it is loading the file OK. It gives the problem when I hit play. I have a break point in this method, at [p play] below, and it gives the first error at that point. The second error message is just reporting the result of the first error:
-(void)startPlaybackForPlayer:(AVAudioPlayer*)p
    if ([p play])
        [self updateViewForPlayerState:p];
    else
        NSLog(@"Could not play %@\n", p.url);

Synched iTunes on computer with iTunes on iPad. I cannot find my slideshow (slideshow.movie) anywhere on the iPad. (Not in Videos, either) Where is it???

Synched my iTunes on computer with iTunes on iPad. All synched, but cannot find my slideshow inn iTunes on iPad. (Format is slideshow.movie and is under Movies in iTunes). Not under Videos, either. Where is it?

Are you sure that the movie was transferred? You actually checked the movie to sync in the movies tab in iTunes?
Actually after re- reading your post - these are the supported video formats for the iPad. I am not a video converting expert, but I don't see that particular format listed here.
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Could not load file or assembly 'ASSEMBLY INFO' or one of its dependencies. The system cannot find the file specified.

We have a custom application that was developed for SP 2010. We converted it to SP 2013 but we have the problem that although the assembly has strong name, SP2013 cannot find it in the GAC. As you know after version 4.0 of .Net Framework. Strong Assemblies
are saving in a different folder (Microsoft.Net\Assemblies). So What do I need to do in the project to add the strong assembly in GAC or how do I tell Sp 2013 where is the assembly. I know you can add the assembly info in the web.config file but I do
not like the idea of doing that because we change version of the assembly so we need to go again to the web.config and change as many time need.
Thanks for your help

Hi,
If you want to upgrade the Visual Studio 2010 project for SharePoint 2010 to Visual Studio 2012/2013 project for SharePoint 2013, here is a blog for your reference:
Upgrade SharePoint 2010 Visual Studio Solution to SharePoint 2013
http://ranaictiu-technicalblog.blogspot.com/2013/10/upgrade-sharepoint-2010-visual-studio.html
Best Regards
Dennis Guo
TechNet Community Support

MacOS 7 cannot find Unicode Converter

Similar Messages

Maybe you are looking for