Mac OS 10.8.5 イラストレーターCS3 ライセンス認証を行いたいのですがどうすればよいですか?

Mac OS 10.8.5　イラストレーターCS3　ライセンス認証を行いたい
使用中のMac Pro OS 10.6故障のためiMac 10.8.5を購入しました。仕事で使用しているため引き続きCS3をインストールしたのですが、ライセンスナンバー入力後のライセンス認証でサーバーとアクセスができず困っています。電話 での認証も試みましたが現在対応がないようでした。チャットで質問をとも思いましたが年末年始のお休みに入られています。再開の1/5を待たずして解決できれば非常に助かります。よろしくお願 いします。

Dreamweaver CS3ですが、私も今日全く同じ状態で格闘しておりました。
いったんあきらめて後で認証する、を選択し、パソコンを消し、ランケーブルも抜きました。（これは他のMacに繋ぐ為で関係があるかどうかは判りません）しばらくたってから再度試みた所、今 度はサーバーに繋がり、認証出来ました。
私のMacは１０．１０で、Dreamweaver CS3は１０．５．８からの引き継ぎ品なので、これで巧くいくかどうかは判りませんが、希望は有るかと思います。

Similar Messages

  • Using MAC OS10, After running fine, CS3 now crashes on startup

    Using MAC OS10, After running fine, CS3 now crashes on startup

    Which specific OS version?
    And what does the crash report say?

  • CS3 and PowerPC Mac - can't get Photoshop CS3 to install

    I'm using a PowerPC based Mac - OSX v 10.4.11. I tried to install the CS3 suite - some apps installed fine, some did not. Photoshop CS3 did not install. Now when I try to use PS CS2 quite a few features are missing, particularly in the filters menu. Has anyone seen this? Please help!
    Thanks

    You almost certainly will have to remove CS3 from your System before you can re-install CS2. After you have installed CS2, you can then re-install CS3 in addition.
    Use the Adobe Uninstaller and run the CleanScript as well for good measure.
    http://www.adobe.com/support/contact/cs3clean.html
    Then repair permissions both before and again after installing the software.
    This Tech Note could be useful:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb400607&sliceId=2
    Good luck.

  • PDF from Powerpoint on Mac will not place in CS3 or CS4

    Got a customer supplied PDF generated on a Mac from the latest version of Powerpoint using the Mac Quartz engine. I can not place it in either CS3 or CS4 InDesign, but it will place in CS and CS2. Problems placing it there as well. The PDF contains a smooth shaded background that turns into a black box in the upper left hand conner. If I open the PDF in Acrobat 6 or 7 it also previews incorrectly. Opening in Acrobat 8 or 9 it previews correctly. If I have the customer send a postscript file and I distill it using PDF/A-1b:2005 (RGB) or (CMYK) it seems to work, well at lest I can place it in all versions of InDesign. The problem now is if I export to PDF after placing it reverts back to the black box in the upper right hand conner. Another issue is writing postscript flattens all the transparent objects in the PDF, something I'd rather not do. BTW if I try to use any other PDF setting in Distiller the program quits. Is this a known issue?

    Yes here is the report. Odd that it previews OK in Acrobat 9 tho and not in Acrobat 6 or 7, the two Acrobats that I use, because thats the version I have Pit Stop for. I know I should update Pit Stop but as it is we are lucky to still be open at all with the lack of work here, and can't afford to upgrade anything. I did get these to work but it was a real nightmare and took lots of time.

  • Cannot manually print with Mac OSX 6 and ID CS3

    I installed Mac Snow Leopard OSX yesterday, and now I cannot make InDesign CS3 files print manually. When I go to the printer dialog box and set Manual Print, then return to the ID Print Dialog and hit PRINT, I get the autofeed paper printed, not the manual. What happened?
    Thanks,
    - Mike Yanega

    No, but I will download that now. Thank you.
    - Mike Yanega
    Message was edited by: BowfinBoy
    I upgraded to the 10.6.6 version of the OS and I am still getting the same symptoms. I cannot seem to get Manual Printing from InDesign CS3.
    I just tried printing from my Mail and cannot do that Manually either, so apparently there is a print driver issue?
    - Mike

  • Opening a MAC generated file of Indesign CS3 with a PC

    I have a MAC generated .indd file (CS3) and cannot open it with my PC version of Indesign CS3. When I try to open the documennt the content manager pops up and says "Cannot open "file name" file" It gives a suggestion of updating to a newer version of Indesign, checking for updates, or updating plugins. Is there any way to open a MAC generated indd file on a PC? Any suggestions would be greatly appreciated.  Thank you.

    Hi Bob,
    I actually have it in CS 2, 3, and 4, but all of those versions are created
    on a MAC. I can have it created in any version, but I only have version
    3.0.1 on my PC, which is the only computer I have Indesign on. I have also
    tried opening it in an INX file, without any success.. Any suggestions?
    Sales & Service
    Stanley, WI USA
    FreyMoto.com
    PH: 1-800-374-0933

  • Mac computer: New Nikon d300s, CS3, and Camera Raw

    I just purchased a Nikon d300s. I had a Nikon d50, Mac, iPhoto, CS3, and Camera Raw 4.6.0.30. With Nikon d50,  no problem opening an image from iPhoto into Camera Raw/CS3. With the new D300s, the image opens into CS3 but does not open into Camera Raw. Do I have to buy CS4?

    No, you do not have to. You can alternatively use the DNG Converter, which will process your D300S NEF files into DNG files, which can then be opened in CR 4.6 in CS3. The latest version of the DNG Converter, which supports the D300S, is currently in Release Candidate phase and is available here:
    http://labs.adobe.com/wiki/index.php/Camera_Raw_5.5
    Eric

  • I have CS3 and CS5 on my Mac, can I safely delete CS3 now that I am upgrading to CS6?

    This may seem like a paranoid question, but better safe than sorry...
    I currently have both CS3 and CS5 (Production Premium) loaded on my Mac laptop. I just got the upgrade to CS6 today.
    I really don't need/use CS3 anymore, so I am wondering if it is OK for me to delete CS3 applications from my computer. I just don't want to accidentally delete something that my CS6 upgrade (or even CS5) might need.
    Any thoughts?
    Just trying to be extra careful here before I delete anything...

    Dont worry uninstall CS3 , it would not harm your CS6 , As I said Uninstall it properly do not delete it

  • Printing No Longer Available Option Mac OS X Leopard Photoshop CS3

    I run Photoshop CS3 on my Mac OS X Leopard.  In the past few weeks, Photoshop will no longer let me print .psd files that I have created.  The "Print..." option remains greyed out and the shortcut also will not work.  Photoshop will still print modified .jpg files, and printing is not an issue on any other program I run.
    I tried restarting my computer, running the Software update and running the Adobe update, but none of these attempts fixed my problem.  I am still able to print older .psd files that I previously created using the same program.
    When previewing these .psd files with printing issues on my desktop using the spacebar, the images appear small, grainy and darker than the correct image, rather than the full-size preview. Again, this is not an issue for any other files on my computer, including older .psd files.
    It appears to be a Photoshop issue rather than a printer issue, any suggestions would be much appreciated.  Thank you!

    What is the bit depth of the files that don't print.
    Not knowing what printer you have I can only guess the PSDs that don't print are 16 or 32 bit.

  • How to upgrade from PowerPC G4 w/1GB using CS2 to Mac Pro w/2GB running CS3

    Hello. I have a Mac PowerPC G4 with 1GB of RAM and I'm running OS X 10.4.11. I'm using CS2 ver 9.0.2.
    I have a new Mac Pro with 2GB of RAM and I'm running OS X v10.5.2.
    I would like to run CS3 on my new Mac Pro.
    Could anyone guide me in accomplishing this? I'd like to buy the upgrade to CS3 of course.
    I can't figure out how to do this because of course I want to just load CS3 on the new computer but I want to pay for just the upgrade. And, if I buy the upgrade, I'm not sure my old computer will run CS3.
    Thanks,
    Deena

    Deena,
    In addition to the previous comments, before you do this though, I recommend that you put more RAM in your computers (particularly the G4) so they don't choke trying to run CS3, your operating system, and whatever else you have running. Also check your hard drive free space, particularly on your older Mac, so that you have scratch disk space and place to store at least some of your images.
    And in preparation for the CS3 installation (which is really quite easy), be sure you boot off the System Disk and use Disk Utility to repair permissions and the disk and boot off the DiskWarrior disk and run repairs as well. Repeat repair permissions after the installation. These maintenance routines will help insure that your new CS3 runs well.
    You will find that you have both CS2 and CS3 on your drive. You can safely uninstall CS2 if you wish.
    If you have questions about any of this, please get back to us.
    Neil

  • Is DWCS4 (Mac) as crash-happy as CS3?

    Hi all,
    Anyone used DW CS4 on the Mac? How does it run on a new up to
    date Mac Pro?
    I have been using Dreamweaver for many many years, and the
    thing has always been a crash magnet on the Mac. I had hoped that
    when Adobe took over DW that it would finally get cleaner code and
    run like other modern Mac apps.... I bought CS3 on the day it was
    released and was sad to see the same kind of problems. I have been
    using CS3 regularly and am shocked at the number of issues it has.
    So I just ordered the CS4 Suite with the hope that this will
    finally be the release where the app runs for a few hours without
    crashes or glitches.

    I have run CS3 and CS4 on my iMac (and before that my G5),
    and never had a
    crash.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Mabou2" <[email protected]> wrote in
    message
    news:gmi31q$kfd$[email protected]..
    > Hi all,
    > Anyone used DW CS4 on the Mac? How does it run on a new
    up to date Mac
    > Pro?
    > I have been using Dreamweaver for many many years, and
    the thing has
    > always
    > been a crash magnet on the Mac. I had hoped that when
    Adobe took over DW
    > that
    > it would finally get cleaner code and run like other
    modern Mac apps....
    > I
    > bought CS3 on the day it was released and was sad to see
    the same kind of
    > problems. I have been using CS3 regularly and am shocked
    at the number of
    > issues it has. So I just ordered the CS4 Suite with the
    hope that this
    > will
    > finally be the release where the app runs for a few
    hours without crashes
    > or
    > glitches.
    >
    >
    >

  • Barcode software for Mac to use with AI CS3

    I need a means to generate Postnet barcodes on a Mac platform. Preferrably the result would be vector art. Any ideas? I use AI CS3

    I am also looking for a Mac-based software to generate barcodes. I have heard about Barcode Producer and am pleased to know that people are happy with the software. Steve mentioned about OCRB font and I only have OCR-A font on my Power Mac G4. How would one access this font? Also, has anyone heard about this "Wasp Barcode Builder" for Mac? It is only $65.00, but I can't find any reviews regarding this software.

  • Mac O/S X with CS3 printing issues to a Xerox

    I have multiple systems running 10.4.x and 10.5.x using CS3. We can get Acrobat to print when we select "Print as Image", all other applications in the suite will NOT print until we convert them to a PDF. Things were fine when we were using CS2, but once we upgraded all our systems to CS3 we've had nothing but printing issues. What can we expect when CS4 is pushed out?!? Does any one have any recommendations how to FIX this printing problem, we've reloaded our print drivers multiple times, but NO luck?
    Thanks for any ideas or resolutions.
    Bob

    Reset the printing subsystem and then make sure you install the latest
    printer drivers.
    Mike

  • Mac Version of ADDT for CS3?  Can I use my PC License?

    Can I use the same license on my Mac?
    Richard Goldstein - 12:52pm Apr 27, 2008 Pacific
    I have a license for ADDT which works on my PC.
    Sorry for the cross-post, I put this in the CF forum by mistake.
    1. I'm moving to Mac, can I use my same ADDT PC license?
    2. Is it the same code?
    3. What's the latest version?
    4. Where can I download updates?
    5. IS there a mac version?
    Much obliged,
    Richard
    Reply To This Discussion | Back to Topic List | Bookmark | Change Subscription
    To start a NEW discussion click on the Back to Topic List link and select Add Topic.
    If you are in an archive forum please go up to the main topic list (archives are read only).
    Messages
    1 message.
    First Previous Next Last Show All Messages
    Richard Goldstein - 12:54pm Apr 27, 08 PST (#1 of 1)
    Also, IS THERE a Mac version?

    As it turns out:
    1. yes
    2. sort of
    3. 1.0.0
    4. someplace on the Adobe site
    5. yes!
    And it is working great on my Mac.

  • Mac OS X and Dreamweaver CS3 Synchronization Problem

    Demaweaver does not try to synchronize files located in
    expanded subdirectories:
    - try to change and then list (click rectangle to expand)
    files from one of subdirectories
    collapse directory where this subdirectory is located
    - try to synchronize collapsed directory
    - does not work! (dreamweaver doe not try to put changed
    files - check ftp log)
    My solution: collapse site with 'alt' key before synchronize
    (selecting newer local ...).

    Okay, now I got tuned sound to the other ear too... but I had to put the balance  almost all to the left... and at the same time the max volume is reduced quite a lot even though I put the input volume to Max on system preferences.

Maybe you are looking for

  • Moving songs around on iPod no longer works with upgrade to iTunes 7

    Hi. I just upgraded iTunes 6 to 7 on Win XP. I used to be able to move songs around on my iPod, but I can no longer do this with the newer version. All of my songs have now been rearranged in a different order than it was originally and I can no long

  • WebUtil_File Function Typo

    The defined function "webutil_file.get_file_separator" is actually misspelled in the software. To use it, you have to misspell it as "webutil_file.get_file_seperator". Will this be corrected in future versions?

  • Pass *57 outside of our phone network

    Hi, A user has asked if dialing the *57 (call trace) calling feature works or not.  After looking through our system I could'nt find any reference to it.  I did some research on the net and found very little on how to configure it.  I did find a foun

  • Uploading a video in Windows Media Player format HELP

    I just used the Insert:Media:Plugin to upload a video in .wav format and when I look at it on the web, it just says "ng PL" and nowhere does it play.  What am I doing wrong?  I did 'put' it onto the server.  Any help would be greatly appreciated.  Th

  • Access violation - access list by code

    I have the following code in a windows form application to access a SharePoint list. I have full access to the site collection and the list. However, I got "-1073741819 (0xc0000005) 'Access violation' error when the code tried to access the list. I h