[MacOSX 10.10] [RDP 8.0.12] Remote screen does not match containing window size or monitor

Hello. I am facing a very strange issue that I have never seen before. When I connect to a remote host, the host's screen does not match my client screen, and instead spills over into two monitors. This happens in full screen mode. When switching to windowed
mode, only a portion of the remote host shows, the rest is a black screen.
I would love to post example pics but this site wont let me until I verify my account, but I have no email asking me to do so...

A few notes:
- I have tried a restart.
- I am running two displays, one is the built in 1440x900, one is an external 1920x1200
- I am on OSX10.10.1
- RDP is 8.0.12
- I have tested this against Windows 7 Pro machines
- This was working fine a week ago, just started this week.
Graphics Properties Dump:
Chipset Model: NVIDIA GeForce GT 650M
  Type: GPU
  Bus: PCIe
  PCIe Lane Width: x8
  VRAM (Total): 1024 MB
  Vendor: NVIDIA (0x10de)
  Device ID: 0x0fd5
  Revision ID: 0x00a2
  ROM Revision: 3682
  gMux Version: 1.9.23
  Displays:
Color LCD:
  Display Type: LCD
  Resolution: 1440 x 900
  Pixel Depth: 32-Bit Color (ARGB8888)
  Mirror: Off
  Online: Yes
  Built-In: Yes
HP LA2405x:
  Resolution: 1920 x 1200
  Pixel Depth: 32-Bit Color (ARGB8888)
  Main Display:
Yes
  Mirror: Off
  Online: Yes
  Rotation: Supported

Similar Messages

  • Remote Desktop - The Remote Desktop administrator software does not match the installed client software version.

    Hi,
      I just upgraded to Mavricks and get this when I try to launch Remote Desktop:
    The Remote Desktop administrator software does not match the installed client software version.
    I tried removing the application and reinstalling it to no avail.  Any suggestions?
    Thanks.
    -David J. Eisen

    Hi coold88!
    I have an article for you that addresses your issue:
    Remote Desktop 3: How to install Remote Desktop Administrator software after the client software has been updated
    http://support.apple.com/kb/HT3596
    You will want to make sure you have the latest version of the software as well:
    About Apple Remote Desktop 3.7
    http://support.apple.com/kb/HT5896
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Error remote table does not contain a primary key

    I make replication between oracle and Microsoft sql using getway for sql but when I insert to table in oracle I get this error in apply process
    information :
    ASD.SUBHI.COM is database link from oracle to microsoft sql
    "DBO"."REGIONS" name of the table
    CREATE TABLE regions (a INTEGER primary key) command to create table
    error
    ORA-26711: remote table does not contain a primary key constraint ORA-26712: remote object is "DBO"."REGIONS"@"ASD.SUBHI.COM"
    Note: I go to sql server and verify that primary key is creates
    is this the best place to like this question ?
    if you need more details please tell me I need the answer

    I make replication between oracle and Microsoft sql using getway for sql but when I insert to table in oracle I get this error in apply process
    information :
    ASD.SUBHI.COM is database link from oracle to microsoft sql
    "DBO"."REGIONS" name of the table
    CREATE TABLE regions (a INTEGER primary key) command to create table
    error
    ORA-26711: remote table does not contain a primary key constraint ORA-26712: remote object is "DBO"."REGIONS"@"ASD.SUBHI.COM"
    Note: I go to sql server and verify that primary key is creates
    is this the best place to like this question ?
    if you need more details please tell me I need the answer

  • Remote video streaming not working with Windows Server Essentials Media Pack

    I installed Server Essentials Media Pack and the video streaming via remote access does not seem to be working. I see all the video files on the server's remotewebaccess page in "Media Library" group. When I try to play the video in Chrome
    the player appears for a brief moment, but then the browser starts downloading the entire file. With Internet Explorer the empty browser window opens and the download starts. I am trying it while outside of my local network. The video streaming used to work
    with Server 2012 Esesentials. Am I missing some additional codecs or remote streaming is no longer supported?

    Hi,
    What’s the default player for these media files on your computer? The issue may be caused by the default player could not load the media file correctly. Please make sure Windows Media Player
    with full codec installed is the default one. And then check if the media streaming feature could work as normal. Here is an article about how to configure the media streaming feature, hope it helps.
    Manage Digital Media in Windows Server 2012 Essentials
    http://technet.microsoft.com/en-us/library/jj628151.aspx
    Best Regards,
    Andy Qi
    Andy Qi
    TechNet Community Support

  • Remote Button does not appear in iTunes 11

    Any ideas on how to get the remote button to appear?
    I'm running iTunes 11.1.3 (8) on an iMac 3.06 GHz Intel Core 2 Duo with OS X 10.9.
    I've changed my Sharing Preferences to "Share my library on my local network" and "Home Sharing computers and devices update play counts".
    I think I know where to look for it: right next to the iTunes button, where an iPad button would appear if you were to plug one in.
    I've clicked "View > Show sidebar"; there is no remote button on the list.
    I've turned iTunes off and on again on the desktop.
    I've turned Remote off and on again on the device.
    I've rebooted both the desktop and the device.
    Still no remote button!

    Hi Scott,
    Thanks for using Apple Support Communities.  The Remote app does not appear in the iTunes library; instead, the iTunes library appears in the Remote app which you can then use to manipulate that library.  This article has some information that might help:
    About Remote app for iPhone, iPad, and iPod touch
    http://support.apple.com/kb/ht1947
    This page also has some additional information:
    Apple - Apps - Remote
    http://www.apple.com/apps/remote/
    Cheers,
    - Ari

  • Remote device does not support servicedell wireless 350 bluetooth module + remote device does not support service

    Hello,
    I have a Palm Centro Phone and Dell Latitude D610 with a  Dell wireless 350 bluetooth module. I can send pics from phone to laptop, but when i try to send from my laptop to phone, I get the following message:
    remote device does not support service
    Can anyone help?
    Thanks,
    George
    Post relates to: Centro (AT&T)

    Hi George, have you paired the two devices as a "Trusted Pair"?
    Try pairing them from the Centro side.
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Remote Disc does not show up.

    I am trying to upgrade to snow leopard for my Macbook. (Intel Core 2 Duo 2GHz, 1 GB Ram, Mac OS X version 10.5.8). However the problem is that my dvd drive is busted. So What I would like to do is to remote install from my iMac computer. (Intel Core 2 Duo, 2.4 GHz, 3 GB Ram, Mac OS X version 10.6.7).
    Now I have completed the following steps:
    1. Turned on DVD and CD sharing for both computers, Firewire is turned off and green light is on.
    2. Both are connected the same wireless network using Airport.
    3. Inserted Snow Leopard in the iMac and ran Remote Install Mac OS X.
    Now, the next step is to go to the Macbook and look for remote disc in finder under devices. However, Remote disc does not show up.
    Is there something I'm missing? Both computers are up to date so I don't understand what the problem is.
    - Mr. Cran

    I have the same issue (with a 2011 iMac) but I can see the data in the shared folder list if I browse through the Shared remote Server. A bit strange (because I cannot unmount it unless I VNC into the remote system)

  • Firefox 11 does not update its window in a remote control RealVNC session

    When I am remote controlling a Windows XP 64bit PC with RealVNC, Firefox 11 does not update its window contecns. Old Firefox 3.6 works just fine. Is it called a redraw or drawing issue?

    You can try to disable OMTC and leave hardware acceleration in Firefox enabled.
    *<b>about:config</b> page: <b>layers.offmainthreadcomposition.enabled</b> = false
    You can open the <b>about:config</b> page via the location/address bar.
    You can accept the warning and click "I'll be careful" to continue.
    *http://kb.mozillazine.org/about:config
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    See also:
    *https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

  • My home sharing and remote app does not work. How do I fix it? I am on a university network.

    My home sharing and remote app does not work.
    Here is my setup:
    Macbook 2009 running Mac OS X 10.6.8
    Itunes 10.6.1
    Ipod Touch 4th gen Mac OS X 5.1
    I am on a university secured network.

    Hi Charles, chinese may be difficult, see our resident language ecxpert, Tom's reply here...
    https://discussions.apple.com/message/20061347#20061347
    On the slowness...
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free Disk space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab of Activity Monitor, are there a lot of Pageouts?
    https://discussions.apple.com/servlet/JiveServlet/showImage/2-18666790-125104/AM Pageouts.jpg

  • HT1947 The Remote app does not work with my McBook Air !!!!

    I have tried several time - but the REMOTE app does not seem to work with Mac Book Air.
    Any help ?
    Any comments?

    why ask in the appletv forum rather then the forum for macbook air or whatever ios device you are running the remote app on?

  • Remote Desktop Client software does not match

    hello,
    I run ARD 3 as administrator and just swapped machines by using Migration Tool. Now my ARD on the new machine tells me that "The Remote Desktop Client software on this computer does not match the Administrator software version. the Remote Desktop Administrator software requires a newer version of the client software"
    how do i accomplish this?
    thanks in advance

    Sounds like the new machine might still have version 2.2 client? So download and install the newest client, if that fails follow the instructions Apple has for removing ARD (kb #108021) and wipe out everything, then it shouldn't balk. Although there is a setup bug, where if you update a client machine to 3.1 but then try and install the ARD 3.0 CD it will complain and quit! Following kb #108021 wil allow you to install (or go into the actual mpkg and install the individual .pkg file) but doing this made me wonder if I was missing out on some postflight script that does something useful... so I didn't try and make force it. Just make it happy with an ARD lobotomy, then reinstall :/

  • The Remote Desktop Administrator software does not match......

    The Remote Desktop Administrator software does not match the installed Client software version.
    The Remote Desktop Administrator software must be upgraded on this computer.
    This is the message I have when I installed ARD 3.0 on a new Imac running leopard with no ARD installed previously when I opened up ARD for first time - doesn't let me go any further.
    Have I missed something here and made a stupid install mistake??
    Many thanks
    Message was edited by: art_ik

    Please search the discussions before posting as this question has been asked and answered more than once.
    If this is ARD 3.x, try this:
    • Insert your ARD CD
    • Open in Finder
    • Right click on the Remote Desktop.mpkg and show contents
    • Navigate to contents/installers
    • Drag the RemoteDesktopAdmin.pkg file onto the workstation and install
    • Run Software Update
    • Upgrade to 3.1 admin
    Otherwise, you'll have to completely uninstall ARD and then reinstall it. Follow these instructions for the uninstall:
    http://docs.info.apple.com/article.html?artnum=108021

  • Premiere Pro CS4 over remote desktop does not play sequence

    Hi all,
    I have been researching this issue over the internet but I have found absolutely no references to it:
    I am running Premiere Pro CS4 on my high-resource PC but would like to work from a different room so I am remoting form my laptop to my "good" PC.
    The system lets me do everything I could normally do when working directly on the main PC with the exception of playing back my edited files (before rendering). This is an obvious handicap since I can not watch my edited sequence and am, therefore, working in the blind. I am able to step through it frame by frame, but when I click the play button, it changes to a pause symbol (as usual) but nothing is shown in the video window. This does not just happen when previewing my edited sequence but also when previewing any imported resource.
    Essentially, Premiere Pro CS4 is not playing any video content over a Remote Desktop.
    Other normal playback software (such as VLC, Windows Media Player etc...) works though, so it is not an issue of no video playback at all. This just happens when I'm using Premiere Pro.
    Any suggestions as to what this may be? Any help will be greatly appreciated!

    I was able to edit a full 1080p HD video in Premiere Pro CS5 remotely using HPs RGS (Remote Graphics Software).  I had a Workstation at work with Premiere Pro installed on it and all the source footage on it.  I was then able to log on remotely from home with my old weak-sauce desktop and successfully edit and play back the HD footage remotely.  You just do a google search for HP RGS or go to this link. http://h20331.www2.hp.com/hpsub/cache/286504-0-0-225-121.html
    There is a free trial available too. I don't know why there is not more information about RGS on the web, but it seems to me to be the only solution to work on Premiere or After Effects remotely.
    I hope this helps

  • HT5287 Tried all those suggestions and remote disk does not appear in finder

    Tried all the suggsetions and still cannot see the remote disk in the finder window.

    As noondaywitch says, "Ah! A remote optical drive, not a HD."
    You need to download and install "Secrets"
    <http://macupdate.com/app/mac/27025/secrets>
    It is a System Preferences addition and it will let you set thousands of under the table settings, including making your Macbook Pro beleive it should look for a networked CD/DVD drive, just like the Macbook Air.
    WARNING:  If you go crazy setting lots of extra stuff via Secrets, take careful notes so you can undo any damage you do, as it is unlikely anyone is going to guess you made changes via "Secrets"
    Once you have installed Secrets, go to System Preferences -> Secrets -> Finder and set
    Show remote disks 1 [X]
    Show remote disks 2 [X]
    You may need to restart the Finder before they take effect.  Apple Menu -> Force Quit -> Finder -> Relaunch
    As I am NOT in your situation, I cannot test this in advance, so please let us know if it works as suggested.
    If that does not work, I did a Google search for "enable mac os x remote dvd" and came up with some alternate ways to enable this feature.

  • Keynote remote function does not work anymore

    I have updated my iphone 5s to iOS8 (8.0.2)
    I use mavericks OS X 10.9.5 on my macbook pro.
    Since i have updated my iphone, and KEYNOTE apps, I can't control my presentations with Iphone anymore .
    I tried with an Ipad and all works great but i can't link my phone to keynote on mac via network or bluetooth.
    Before upgrading my Iphone worked properly with this function.
    When i open Keynote-preferences---remote controls on my mac, i can see the Iphone listed, but with a yellow triangle and the button to link it does not work.
    anyone can help me ?
    thank you.
    Mauro

    thank you Gary,
    I guessed it too, but unfortunately i have something like this:
    It's not english, but maybe you can notice that the last device has not "RIMUOVI" (REMOVE) function, but just "ABBINA" (LINK)
    even if i push that button nothing happens and the little triangle persists.

Maybe you are looking for