MacPorts install issue with Xcode

When I try to install MAcPorts v 2.1.3 I get the message. Xcode is not installed, or was installed without UNIX Development. When I try to open Xcode to install I get a choose application message. Running a MacBook Pro on OSX 10.6.8, what application do I open it with to install?

Look in Hard Drive/Library/Receipts. Do you see any .pkg files in there that could be related to FCP?
Delete them and try again.

Similar Messages

A weird installer issue with xcode

This is a new macbookpro i bought only a few weeks ago. I installed xcode on it, then removed it due to the fact that i needed to put some really huge hd video files, which needed all the hard disk space i could muster. After moving the videos from my mbp to my external hd, i tried to install xcode again. However, xcode's mpkg won't open, no matter how many times i open it with installer. Other mpkgs and pkgs work fine. What's the problem?

Hi rhonnywhoop, and welcome to the Dev Forum!
rhonnywhoop wrote:
I installed xcode on it, then removed it ... i tried to install xcode again.
There's no such thing as a weird issue with Xcode after an uninstall-install again cycle. Almost anything can go wrong and weird is the rule, not the exception. But yes, most of the strange problems show up after the installation (e.g., Xcode won't open, Xcode starts up but gcc always fails, Interface builder won't read nib files, etc., etc.). If I needed disk space for a video, I'd probably get another drive before I'd uninstall Xcode, but then I use Xcode all the time. Plus it's too late for that advice, so I'll try my best to point you in the right direction.
A few questions:
1) Was there any message when the mpkg failed to open? Please post any such message for us;
2) Did you install from the DVD that came with your MacBook, or did you download a dmg from the Mac or iPhone Dev Center? If you haven't tried downloading the latest Xcode version yet, that might be worth trying;
3) Did you uninstall from Terminal, using the command given in the Xcode doc (e.g. /Developer/"About Xcode Tools.pdf"? If not, how did you uninstall the prior Dev Tools?
4) Is any entry made in one of your logs at the time of the failure? E.g., open Console.app (in /Applications/Utilities) and look for the most recent entries in install.log and system.log. If you find anything like that, please post it for us;
5) Have you tried any additional cleanup besides the recommended uninstall (question 3, above)? Based on case histories in this and other forums, the most powerful trick is to rename /Developer (e.g. to /OldDev). Other tips will be found by searching on terms like "uninstall" or "clean" in this forum.
In general, we can assume that since your previous installation was successful, the game is to restore your system to its past condition. This may seem like a no-brainer, but it might help to rule out irrelevant conditions as you try one thing after another. In fact, some developers have cleaned up by re-installing the entire system (needless to say, be sure to try restarting your system before resorting to anything that drastic!). On the other hand, some developers have reported that installing a more recent version of the Dev Tools (if any), can clean up a problem when repeated installs of the same system fail.
I hope something above will lead you to a solution. Several other developers who regularly contribute to this forum know much more than I do about installation problems. For example, if etresoft joins this thread, be sure to follow his instructions completely and before any others.
\- Ray

Issues with Xcode 4.3.2 Mobile Device Framework Installation

After downloading this newest version of Xcode 4.3.2, I tried to open it.
Xcode greets me with Xcode component installation, stating that Xcode must install the following components before continuing
So I click install and type in the correct administrative password.
But immediately after this, Xcode gives the alert " An unknown error occurred. See the install log for more details."
However, the log proves to be not helpful at all.
Apr 9 22:42:06 mediter diskmanagementd[30360]: DM ->T+[DMToolBootPreference getPartitionBootability:]: inUDS=0x101146c30=disk0s2=Mighty Lion
Apr 9 22:42:06 mediter diskmanagementd[30360]: DM ..T+[DMToolBootPreference getPartitionBootability:]: PMBootable=1            (bootable right now without any further action)
Apr 9 22:42:06 mediter diskmanagementd[30360]: DM ..T+[DMToolBootPreference getPartitionBootability:]: PMBootCapable=0         (bootable if you call MKCFPrepareBootDevice)
Apr 9 22:42:06 mediter diskmanagementd[30360]: DM ..T+[DMToolBootPreference getPartitionBootability:]: PMBootSurgeryRequired=0 (for primitive MBR on BIOS, add boot block and loader)
Apr 9 22:42:06 mediter diskmanagementd[30360]: DM ..T+[DMToolBootPreference getPartitionBootability:]: PMFSSurgeryRequired=0   (for primitive MBR on BIOS, add boot block and loader)
Apr 9 22:42:06 mediter diskmanagementd[30360]: DM ..T+[DMToolBootPreference getPartitionBootability:]: PMNewfsRequired=0       (bootable with MKCFPrep but it will rudely carve)
Apr 9 22:42:06 mediter diskmanagementd[30360]: DM <-T+[DMToolBootPreference getPartitionBootability:]: MKerr=0 out=132=0x84
I tried to repair disk permission, then restart to try Xcode again, the same issue occur.
I really can't figure out what went wrong here. Could anyone please offer a helping hand?
Thank you very much!

When I want to "Install That MobileDevice.pkg" appeared to me "The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance".
You can help me, please ?

APEX Listener 1.1.4 install issue with listener configuration

Oracle XE 11gR2
APEX 4.1.1
APEX Listener 1.1.4
Glassfish 3.0.1
=============
Installing APEX Listener 1.1.4 to replace APEX Listener 1.0.2. Deployed apex.war file but now:
(1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images. Still I can enter data into fields. Wonder why the graphics/images are missing when page is rendered.
(2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". I can connect via SQL Developer to APEX_PUBLIC_USER with same credentials. I was able to connect before with previous APEX Listener.
Any ideas?

Hi,
(1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images.
You either have to clean your browser cache or your browser is too old/not capable of rendering the css of APEX Listener correctly.
(2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". "Permission denied" doesn't sound an issue with your database configuration. Do you have anything in your APEX Listeners log (probably within your GFs server.log) for that issue?
But perhaps the error disappears as soon as you also get a proper configuration page.
-Udo

Vertex install issues with 46C - RFC setup?

Dear Fellow SAPoniSeries'ers,
We have installed the Vertex Q Series tax software with our SAP 46c implementation and we are having issues with the Remote Function Call (RFC) setup. We know that Vertex and SAP programs need to have the same "signatures" for the LIBRFC service program, and when we finally figured that out, but now we get the following message for the VERRFC but the RFCTEST works ok;
"time out during allocate /CPI-C error CM_PRODUCT_SPECIFIC_ERROR"
It appears that the RFC is trying to run as it does not immediately fail. VERRFC and RFCTEST are both now bound to VERQSU/LIBRFC service program.
We have upgraded to the ASCII database format, we are running OS/400 V5R3 and the Vertex software is Translink 2.0.22.
I would GREATLY appreciate any advice or lessons learned.
THANK-YOU!
Tim Murphy
Nalge Nunc International
Rochester, NY USA

Tim, I don't recall just how we fixed this, but we had the same isses. Here is a cut/paste from an email I have from Vertex...this is a bit old, but may give some insight:
In the past, we have encountered issues when customers upgraded their SAP
Kernel on the AS400 (ex: going from LIBRFC 44 to LIBRFC 48)with a different
version of the SAP service program. For convenience Vertex started
providing a backup LIBRFC file in the event a problem was encountered that
caused calls to Translink (VERRFC) to fail because of incompatible or
unmatched signatures in a newer release of SAP's LIBRFC.
We have also encountered similar issues when upgrading Translink, as you
became aware when you applied your recent Vertex 3.0 & 3.1 upgrades.
Because we need to be compatible with various releases of R/3, we provide a
renamed copy of SAP's LIBRFC that we used at time of binding. This file is
LIBRFCBCK.
In the event of a signature violation, the Vertex LIBRFCBCK can be renamed
in-place to LIBRFC and Translink will find this version of the Service
Program first. Translink (VERRFC) will always look locally for the file. If
not found, it will find the one SAP provides in the SAP instance and
attempt to use it.
Volker, we use Vertex, issues with ASCII, ECC6.0?

Issues with XCode

I was typing this in XCode (I had just gotten to the end) when this error comes up. A similar error also appears when I try to backspace over a double-slash comment if the comment is the first line.
What does the error mean and why is it coming up?
BTW I didn't realize the image links would cause the image to display; if they aren't, here are the links:
/___sbsstatic___/migration-images/105/10575740-1.png for the first one and
/___sbsstatic___/migration-images/105/10575740-2.png for the second one.
Message was edited by: musicwind95

I tried, and it did not help. Notice that I had typed the for(), pressed return, and tried to indent the code by pressing tab twice. I pressed them, XCode lagged, and then displayed the error. I cleared the caches before, and it didn't help. This issue has been present in Leopard as well as Snow Leopard, with XCode 3.1 and 3.2.

App-V 5 SP2 install issue with Intel NIC Driver 11.16.96.0

When deploying App-V 5 SP2 using SCCM 2007 it will install with no problem on the machine. However, when the user reboots after the install the machine will blue screen. The user then reboots again and machine comes up to the desktop. However,
the App-V service is not running and is still set to automatic.
Looking at the Blue Screen dmp file the common theme looks to be a conflict with an Intel NIC driver version 11.16.96.0. Machines running an older version of the driver do not experience the issue with the blue screen after reboot and the App-V service
starts with no issues.
Has anyone seen this issue before?

Version 19 appears to be the latest: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=18713&lang=eng&ProdId=3025
Have you tested with this version instead?
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

Install issue with CD drives / and burning

I am running Windows Vista 64 on a new computer I built (latest ASUS P5K-E with a quad Q6600 cpu and 4gigs of RAM). I transferred all my music and installed iTunes. Everything is working fine except for the burning of disks. It did give me a prompt at the end of the iTunes install and on first startup that there may be a problem recognizing the CD drives. However, there is no problem importing music on those CD/DVD burner drives -- but I cannot burn on those drivers. I can burn using other software on these drives -- no issues with the drives at all. Under iTunes "Preferences", and 'Burning' it states "No supported Disk burners found". Both are Lite-on CD/DVD burner drives and less than a year old -- and of course worked on the old XP computer with iTunes. I have uninstalled, reinstalled iTunes -- no luck. Any ideas? This looks to be something in the Registry on install, but not sure what to do. Any help appreciated.

You may need the CD Configuration folder too, after you install the drivers.
Here is the CD Configuration folder, with the Files you need Just Unzip it and place the CD Configuration Folder into Your C:\Program Files (x86)\iTunes Directory
http://stahlhammer89.com/apple/CD_Configuration.zip
I had my friend with Windows Vista x86 Install iTunes and give me the Folder and Files I needed.
Hope this helps you

ColdFusion 8.01 install issue with Win2008 server

I am having an issue with the installer on ColdFusion 8.01 in Win2008 server. I have done 5 or 6 identical installs with no problem so this caught me by surprise, The server OS is Server 2008 R2 Enterprise service pack1. I am running the install (coldfusion-801-win.exe) as an administrator in emulation mode (Windows Server 2003 service pack 1). The following is the error i get. As I stated earlier I have done this exact install, both single & multi-server, on 5 or 6 Win2008 servers with no issue. Any help would be appreciated.

It is definitely possible as I did it some time ago, alas don't have notes any more. Unless anyone here has some specific build notes on it, it's just a case of "Google is your friend" unfortunately.

7.6.1 has install issues with XP Home

On a clean install of XP Home, both iTunes 7.6.1 and 7.6.0.29 fail installation and show an alert that "itunesphotosupport.dll" cannot be accessed because it does not have permission. However, I'm signed in as Administrator.
I've tried downloading with both IE7 and FF, but the result is the same. Even went back to a restore point created after XP was updated and before any additional programs were installed.
Judging from the number of users who are having issues with 7.6 one has to conclude that the program was released prematurely. I'm not going to sell my Apple stock, but wish they would stop imitating Microsoft.

I would like to get an install log:
1. Choose Run from the Start menu.
2. Type cmd and press Return.
A command prompt window appears.
3. Drag the iTunesSetup.exe (make sure it is iTunes 7.6.1) file from
your desktop or downloads folder into the window.
4. Type a space and then this text: /l*v C:\log.txt
5. Hit Return
The iTunes installer runs and creates log.txt in your C:\ drive.
6. Attach that log.txt file to an email back to me <[email protected]>.

MultiMedia Center for Think Offerings install issues with Vista

Hello,
I recently upgraded my ThinkPad Z60m to Vista by doing a clean install from disk. Since this process involves manually installing each of the ThinkPad utilities manually (no pre-built image for Vista, only XP), I have ran into some issues with the installer for the MultiMedia Center for Think Offerings.
According to the Support & Download page, there are two downloads available for the Z60m and both have issues (or errors) that are preventing me from installing the application. Below are the two products and reasons for not installing:
"MultiMedia Center for Think Offerings for Windows XP and 2000"
Problem: Does not install on Vista
Error message: "Could not open \device\physicalmemory"
"MultiMedia Center for Think Offerings for Windows Vista"
Problem: ThinkPad Z60m is not a supported
Error message: "This program is not for machine type 2529EAU"
What I am looking for is an installation of MultiMedia Center for Think Offerings that supports users who have upgraded from XP to Vista (or downgrade depending on your feelings of Vista ). I have not found anywhere saying that upgrades from XP to Vista are not supported, so I should expect that software updates should be available for ThinkPad products on either platform.
Thanks in advance for your help.

I recently did a clean install of Win7 Ult on my X61 7676A24, and this is the only Lenovo software that I could not find a Win 7 solution for. However,
1. I was able to load WinDVD8 upgrade (from Lenovo's Win7 information page) after first loading the WinDVD5 version that was the last good release for Vista.
2. The Multimedia Center for Think Offerings is basically Roxio's suite for writing cd/dvd's, drag to disc and so on.
Since I could not load this anyway, I was forced to try out Win7's inbuilt cd/dvd writing - it works perfectly well. Even better, Win7 natively supports an excellent ISO burning tool. So, I think if you explore these inbuilt tools, you can probably live without the Mul Cent for Think Off.
TP600E > T41 > X61 > X201T > X220 i7 IPS 8GB 160GB SSD

Windows 7 install issue with Snow Leopard

Hey Guys!
Just upgraded my Macbook Pro (Unibody Late 2008) to Snow Leopard and did all software updates. I then partitioned the drive to install Windows. When installing Windows it would only install if I reformatted the partition I wanted to install it on. So I did that. After hours of installing and udating Windows 7 I found that I did not have bootcamp on the bar at the bottom. I tried to upgrade to BootCamp 3.1 but it says Bootcamp 3.0 is needed and not present.
How do I install Bootcamp 3.0 from Windows?
How do I get back to Mac OS? I have been stuck (ugh!!!) in Windows since Friday...
I tried to download the pdf file to read about installing Windows 7 but Windows will not install Acrobat Reader (I really hate windows), fought with it for 1 hour trying to install it.
anyways thanks in advance for the help
KK

Hey Guys
I eventually solved the Boot Camp Problem but then shortly after that had a different problem crop up.
It will not boot my Mac OS, it says the partition is corrupted. Even if I boot from an install disk, it will not mount the Mac portion of the Hard drive. Best info I can get on the issue is that part of my B Tree is too large? Mac Repair utility will not fix it.
Suggestions? Even if I cannot use the partition as a bootable drive I would like to get my data from that disk. Unfortunately I do not seem to have a backup of the data on that drive.
thanks
KK

Windows 7 Install Issues with Mac Pro

I have Mac Pro with Windows XP SP3 installed with Boot Camp on a separate, dedicated 250GB HD.
I purchased an upgrade version of Windows 7 Home Premium. I hoped to install the 64-bit version. I upgraded, per Boot Camp I&S Guide, Boot Camp to version 3.1. After Boot Camp upgrade, I mounted the Windows 7 64-bit installation disk. Since the Windows disk did not open automatically, I then attempted to open the Setup.exe file but got the following error message –
“D:/setup.exe is not a valid Win 32 application.”
I suspect the Boot Camp 3.1 upgrade was for the 32-bit Windows XP system currently installed and this caused Windows 7 (64-bit) not to open.
If my suspicion is correct, would upgrading to Boot Camp 3.1 (64-bit) cause problems with the currently installed Windows XP? Any advice would be appreciated.

I have since attempted to boot from the Windows 7 install disk by using both the OS 10.6.3 System Preferences/Startup Disk and from within Windows XP using the Boot Camp Control Panel. In both cases, all I saw was a black screen with a “Select CD-ROM Boot Type” and flashing cursor. No keyboard input was possible.
If anyone encounters this problem, go to the Boot Camp/Installation and Storage discussion and search for “Select CD-ROM Boot Type”. Hal Jay Greene has an excellent article here titled “Select CD-ROM Boot Type Error installing Windows 7 in Boot Camp walkthrough” dated Mar 20, 2010 that walks one through the process of creating a boot disk for installing Windows 7 x64. Two minor comments on his discussion. John Anderson’s blog is at www.AndersonsHatch.com (note extra s) and Imgburn can be downloaded free from www.imgburn.com.
I used Mr. Greene’s procedure and the resultant boot disk loaded Windows 7 correctly.
Unfortunately, a new issue arose. Installing Windows 7 over Windows XP requires a clean install that eliminates all Boot Camp installations. After installing Windows 7, I attempted to load Boot Camp by inserting the Mac SL installation disk and clicking on Setup in the Boot Camp folder. The result was this error message: “Boot Camp x64 is unsupported on this computer model”. Fortunately, there is a procedure that worked for me, and my MacPro, to bypass this error message. It can be found near the bottom of this article http://blog.andersonshatch.com/2009/01/11/windows-7-x64-on-a-macbook-pro-guide/ on John Anderson’s blog.
Message was edited by: johnshap

PSE 10 Install issue with Mac OS 10.6.8

Hi,
I'm having trouble installing a copy of PSE 10 on a Macbook Pro (Intel 2.4 GHz) with Mac OS X version 10.6.8. I've tried downloading the software twice and get errors on both copies. Here is the latest error:
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 23 error(s), 3 warning(s)
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirJZhvRqio/Assets1/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL/Fonts/AdobeMingStd-Light.otf" to "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL/Fonts/AdobeMingStd-Light.otf" Error 0(Seq 1343)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 1343)
ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL/Fonts"(Seq 1332)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1332)
ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL"(Seq 1152)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1152)
ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required"(Seq 1098)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1098)
ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
The second downloaded version made it farther than the first on the installation. It makes it to the installation of PSE 10 and then jumps from 60% installed to 98% and shows the above message. This is getting really frustrating given that it takes me several hours to download a copy of this software.
Any advice would be greatly appreciated.

Hi Barbara,
Thanks for the advice. Unfortunately, it didn't work. I deleted (and emptied the trash) of the Adobe folder in the Hard drive>library>application support folders, uninstalled the partial install of PSE 10 using Adobe's uninstall, turned off the antivirus software, and tried installing from a new administrative account. Here is the error code from this most recent attempt.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 23 error(s), 1 warning(s)
----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirSAstoywp/Assets1/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL/Fonts/AdobeMingStd-Light.otf" to "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL/Fonts/AdobeMingStd-Light.otf" Error 0(Seq 1343)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 1343)
ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL/Fonts"(Seq 1332)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1332)
ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL"(Seq 1152)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1152)
ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required"(Seq 1098)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1098)
ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
This computer has had some previous Photoshop versions migrated to it over the years (Photoshop 4.0 for OS 9, and Photoshop 7.0). Photoshop 7.0 stopped working after I upgraded the OS from Tiger to Snow Leopard, and I no longer have the disks or serial number so that is why I'm trying install PSE 10. Could these old versions (which I tried to delete, but did not have a specific uninstall version for) be a source of this issue? If so, is there a way to make sure they're all gone?
Thanks

Cs4 install issues with windows 8

I am having problems installing masters 4 on my new laptop with windows 8 it does not have a dvd player, after days of downloading from your cs4 page i gave up from the errors and went and bought a DVD player to use my discs from adobe... I can get it to open ask if i want to install which I say yes it Starts to run then stops... I have turned off the processes in windows clean booted and same thing.
So after weeks of frustration how do you declaring i install my product?
To avoid this with lightroom i bought just weeks ago i upgraded to the new one to avoid this exact same thing. Amazingly it worked fine after i paid for the new version...
I do not need the upgrades... cs4 does what I need it to do just fine for when i need to use it i mostly use lightroom for work and photoshop and illustrator or every great now and then one of the others in the collection.
This is very frustrating and swaying my client loyalty...
So where can you direct me to directions to install my programs please?
This is preventing me from working.

CS4 was never tested on Win 8 or developed with it in mind. Compatibility issues are to be expectred. Provide exact system info and the install logs:
Working with your Operating System’s Tools
Troubleshoot installation with install logs | CS3, CS4
Mylenium

MacPorts install issue with Xcode

Similar Messages

Maybe you are looking for