MacPro 1,1 (Lion) + Bootcamp + Windows XP + ATI Radeon 1900XT = not working
Hi as written in the title my ATI Radeon 1900 not working after Lion update on WinXP.
has someone any advice ...... if its not working i have to switch complete the Macpro
a list of all hardware conflicts:
Ressource Gerät
E/A-Port 0x00000000-0x00000CF7 PCI-Bus
E/A-Port 0x00000000-0x00000CF7 DMA-Controller
IRQ 20 Intel(R) 631xESB/6321ESB/3100 Chipset USB Universal Host Controller - 2689
IRQ 20 Intel(R) 631xESB/6321ESB Ultra ATA Storage Controller - 269E
E/A-Port 0x000003C0-0x000003DF Intel(R) 5000 Series Chipset PCI Express x8 Port 4-5 - 25F8
E/A-Port 0x000003C0-0x000003DF Intel(R) 5000 Series Chipset PCI Express x8 Port 6-7 - 25F9
E/A-Port 0x00000070-0x00000077 System CMOS/Echtzeituhr
E/A-Port 0x00000070-0x00000077 Hauptplatinenressourcen
IRQ 21 Intel(R) 631xESB/6321ESB/3100 Chipset USB Universal Host Controller - 268A
IRQ 21 Intel(R) 631xESB/6321ESB/3100 Chipset Serial ATA Storage Controller - 2680
Speicheradresse 0xC0A00000-0xC0AFFFFF Intel(R) 631xESB/6321ESB/3100 Chipset PCI Express Root Port 4 - 2696
Speicheradresse 0xC0A00000-0xC0AFFFFF Broadcom 802.11n-Netzwerkadapter
E/A-Port 0x00003000-0x00003FFF Intel(R) 5000 Series Chipset PCI Express x8 Port 2-3 - 25F7
E/A-Port 0x00003000-0x00003FFF Intel(R) 6311ESB/6321ESB PCI Express Upstream Port - 3500
E/A-Port 0x00003000-0x00003FFF Intel(R) 6311ESB/6321ESB PCI Express Downstream Port E3 - 3518
E/A-Port 0x00003000-0x00003FFF Intel(R) PRO/1000 EB Network Connection with I/O Acceleration #2
Speicheradresse 0xFEC00000-0xFECFFFFF Hauptplatinenressourcen
Speicheradresse 0xFEC00000-0xFECFFFFF Erweiterter programmierbarer Interruptcontroller
IRQ 16 Intel(R) 5000X Chipset Memory Controller Hub - 25C0
IRQ 16 Intel(R) 5000 Series Chipset PCI Express x8 Port 2-3 - 25F7
IRQ 16 Intel(R) 6311ESB/6321ESB PCI Express Upstream Port - 3500
IRQ 16 Intel(R) 6311ESB/6321ESB PCI Express Downstream Port E1 - 3510
IRQ 16 Intel(R) 631xESB/6321ESB/3100 Chipset PCI Express Root Port 2 - 2692
IRQ 16 Texas Instruments OHCI-konformer IEEE 1394-Hostcontroller
IRQ 17 Intel(R) 6311ESB/6321ESB PCI Express Downstream Port E2 - 3514
IRQ 17 Intel(R) 631xESB/6321ESB/3100 Chipset PCI Express Root Port 1 - 2690
IRQ 18 Intel(R) 6311ESB/6321ESB PCI Express Downstream Port E3 - 3518
IRQ 18 Intel(R) PRO/1000 EB Network Connection with I/O Acceleration
IRQ 18 Intel(R) 631xESB/6321ESB/3100 Chipset PCI Express Root Port 3 - 2694
Speicheradresse 0xC0C00000-0xC0CFFFFF Intel(R) 631xESB/6321ESB/3100 Chipset PCI Express Root Port 4 - 2696
Speicheradresse 0xC0C00000-0xC0CFFFFF Broadcom 802.11n-Netzwerkadapter
IRQ 19 Intel(R) PRO/1000 EB Network Connection with I/O Acceleration #2
IRQ 19 Intel(R) 631xESB/6321ESB/3100 Chipset PCI Express Root Port 4 - 2696
IRQ 19 Broadcom 802.11n-Netzwerkadapter
IRQ 19 Intel(R) 631xESB/6321ESB/3100 Chipset USB Universal Host Controller - 2688
IRQ 19 Intel(R) 631xESB/6321ESB/3100 Chipset USB2 Enhanced Host Controller - 268C
Speicheradresse 0xC0000000-0xC09FFFFF Intel(R) 5000 Series Chipset PCI Express x8 Port 2-3 - 25F7
Speicheradresse 0xC0000000-0xC09FFFFF Intel(R) 6311ESB/6321ESB PCI Express Upstream Port - 3500
Speicheradresse 0xC0000000-0xC09FFFFF Intel(R) 6311ESB/6321ESB PCI Express Downstream Port E3 - 3518
Speicheradresse 0xC0000000-0xC09FFFFF Intel(R) PRO/1000 EB Network Connection with I/O Acceleration #2
Speicheradresse 0xA0000-0xBFFFF PCI-Bus
Speicheradresse 0xA0000-0xBFFFF Intel(R) 5000 Series Chipset PCI Express x8 Port 4-5 - 25F8
Speicheradresse 0xA0000-0xBFFFF Intel(R) 5000 Series Chipset PCI Express x8 Port 6-7 - 25F9
E/A-Port 0x000003B0-0x000003BB Intel(R) 5000 Series Chipset PCI Express x8 Port 4-5 - 25F8
E/A-Port 0x000003B0-0x000003BB Intel(R) 5000 Series Chipset PCI Express x8 Port 6-7 - 25F9
Similar Messages
-
IMac, Bootcamp, Windows 8.1, Fusion Drive - not working
Hey there,
as many other here I habe problems installing Windows 8.1 on my iMac (late 2013) with a 3TB Fusion Drive.
I'm playing around with that installation about 3 days or so.
Even got a problem where I couldn't delete partition and suddenly got a second logical volume group
Somehow I could fix that.
I tried to install it with the help of Threads which are already opened here but had no success.
I just want a plain Windows version, not on that SSD part of my Fusion Drive, just about 500GB of Windows
And maybe there is a chance without reinstalling Yosemite?
Hopefully you can help me through that process.
And many thanks in advance, here is the output of my disk:
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *121.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 121.0 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *3.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 3.0 TB disk1s2
3: Apple_Boot Recovery HD 650.1 MB disk1s4
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Macintosh HD *3.1 TB disk2
Logical Volume on disk0s2, disk1s2
7FAF6BAA-C32E-4BE8-8378-1AB952103D4B
Unencrypted Fusion Drive
+-- Logical Volume Group 720DDB76-2216-4981-859C-5F2DBC428983
=========================================================
Name: Internal Drive
Status: Online
Size: 3120721960960 B (3.1 TB)
Free Space: 0 B (0 B)
|
+-< Physical Volume D73AC2AF-13EF-456E-915E-8B11D0D99E64
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 120988852224 B (121.0 GB)
|
+-< Physical Volume 84ECF042-B99E-4B7C-B9FC-591B359DD333
| ----------------------------------------------------
| Index: 1
| Disk: disk1s2
| Status: Online
| Size: 2999733108736 B (3.0 TB)
|
+-> Logical Volume Family 7734F0C3-28D6-4B35-8F73-8D8675DABDDD
Encryption Status: Unlocked
Encryption Type: None
Conversion Status: NoConversion
Conversion Direction: -none-
Has Encrypted Extents: No
Fully Secure: No
Passphrase Required: No
|
+-> Logical Volume 7FAF6BAA-C32E-4BE8-8378-1AB952103D4B
Disk: disk2
Status: Online
Size (Total): 3114866704384 B (3.1 TB)
Conversion Progress: -none-
Revertible: No
LV Name: Macintosh HD
Volume Name: Macintosh HD
Content Hint: Apple_HFSHey,
yes there was no Windows Partition as I wanted a clean start
sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=121332826112; sectorsize=512; blocks=236978176
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 236978175
start size index contents
0 1 PMBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 236306352 2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
236715992 262144 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
236978136 7
236978143 32 Sec GPT table
236978175 1 Sec GPT header
sudo gpt -vv -r show /dev/disk1
gpt show: /dev/disk1: mediasize=3000592982016; sectorsize=512; blocks=5860533168
gpt show: /dev/disk1: PMBR at sector 0
gpt show: /dev/disk1: Pri GPT at sector 1
gpt show: /dev/disk1: Sec GPT at sector 5860533167
start size index contents
0 1 PMBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 4687239264 2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
4687648904 1269760 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
4688918664 1912
4688920576 1171611648 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
5860532224 911
5860533135 32 Sec GPT table
5860533167 1 Sec GPT header -
I installed Lion and now my MS office will not work, is there a way to revert back my original software?
Back to Snow Leopard from Lion install method
Read and print out these instructions, your computer is going to be offline and you wil be cutoff from help until your machine is restored.
Clear the Desktop, Downloads and Trash of anything you wish to keep by placing their files in the respective Documents, Music, Pictures, Movie folders.
If you have a TimeMachine drive, update it and disconnect for the duration of this restore time. It will be your second backup system and will have to be wiped and setup again after successfully going back to Snow Leopard if it was connected to the OS X 10.7 boot drive. If it wasn't, then leave it disconnected without updating to Lion.
Backup ALL your Users folders (Documents, Pictures, Movies, Music etc) manually (drag and drop methods) to a (not TimeMachine) external powered drive (HFS+ journaled formatted in Disk Utility) and disconnect, your going to be wiping the entire disk of ALL DATA. (warning, everything will be gone and not recovered)
Here we go!
Hold c and boot off the 10.6 installer disk that comes with your computer and second screen in just STOP.
Look at the Utilities Menu for Disk Utility.
On the left is the name of your hard drive maker, click it and Erase (format HFS+ Journaled), give it the same name as before, and click Erase...
This should wipe the drive of ALL partitions (GUID, OS X and 10.7 Recovery, Windows if present)
When it's done, quit and install OS X 10.6. Then install all your programs from fresh sources and validate/update.
When you setup a first account, use the same user name as before, this way you can simply drag and drop the content of your previous Users folders from the external drive right back into the new Users folders and everything should work peachy. Links in iTunes to music, playlists and iPhoto links especially.
Update OS X to 10.6.8 using the Combo Update for best results.
http://support.apple.com/kb/DL1399
(Note: If your original machine had 10.5 and you want the free iLife that comes with the disks with the computer, then you'll have to install 10.5 first using the same c boot/erase/format methods as above, then update to 10.6 via the disk, then Combo Update 10.6.8)
Final step optional but highly receommended.
A lot of people use a Carbon Copy Clone of their boot drive to a HFS+Journaled external drive as a "hold the option key" bootable backup in case something goes wrong with their boot drive or need to restore to a previous OS X version.. (in addition to TimeMachine drive for more immediate backups.)
It's not advised to have a Bootable Clone and a TimeMachine partition on the same external drive, as two drives gives hardware protection in case one fails. -
Reopen All Windows from Last Session is not working
The option Reopen All Windows from Last Session is not working, is there any other way to recover the tabs from my last session?
Last night I fell asleep and my friend shut down my laptop.
When I woke up in the morning I couldn't restore my last session which had several tabs opened for my research.
I don't know the exact date when I found them, so I haven't been able to find them in History either.
I've looked around on the internet, but haven't been able to find anything that helped me out.
Hope you can help me! Thanks.Restart your Mac.
Check the box for: Reopen windows when logging back in
Then check History > Reopen Windows from Last Session -
TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update serverTry this:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Windows Vista and iTunes does not work
First Time sorry for my bad English, I'm from Germany and my English is not the best.
I have the new Windows Vista but iTunes does not work good.
And I have to use it, to manage my music on my iPod.
When there will be a Vista compatibles Version of iTunes??
And when will come an 64-Bit Version?
Thanks for Help,
KarsteniTunes running under VISTA does not recognize media burned by iTunes Backup (v7.0.2) from a non-Vista machine.
The original machine recognizes the media just fine, but the new VISTA machine does not recognize the dvd at all.
Anyone else having a problem with VISTA recognizing burnt media? -
I downloaded Elements 13 to my PC, but my PC has windows Vista and it does not work. How can I download it to my laptop that has Windows 8?
You can get it at this link and validate with your 24 digit serial number - click here for PSE downloads
-
Problem surface pro 2, windows 8. brush pressure is not working in Ps CC ,
problem surface pro 2, windows 8. brush pressure is not working in Ps CC
Este foro es un Foro de Usuarios en español.
Puedes probar a explicar tu problema con mayor detalle.
Indica por favor detalles de hardware
(Podemos estar familiarizados con Photoshop, pero no con tabletas híbridas)
Concretamente, cómo utilizas el pincel de presión? -
After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.
This is boot camp problem, because in other normal notebooks (e.g. SONY VAIO, Lenovo with Windows 7) the gadgets are working normally.
I am attaching the screen shot of Desktop Gadgets and Security updates of Windows 7.
Kindly solve this issue ASAP.
Shailendra Gupta
<edited by host>You are not addressing Apple, but a community of unpaid volunteers. So ASAP won't cut it. Also, you should refrain from posting personal information (like your email address) in the body of your comments, as this is part of the community usage guidelines.
Have you reinstalled the latest Boot Camp Windows 7 drivers, just in case Microsoft overwrote some of them during the Windows 7 security update?
If you want to communicate issues with Apple about Boot Camp and OS X, click on the link. Just don't hold your breath on receiving a response. -
Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard
I originally posted this question here:
answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
and was asked to post it on this forum...
I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power. I have finally gone back the previous version 9926, which has its issues but no where near as bad
as not having any network connectivity! Does anyone have this issue and a workaround?
Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
this... Thanks!
I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
(but I suspect not just the only culprit) in this above mentioned problem...
10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop.
Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
that has happened with the Cisco software install attempts under 10041.
Another note: CISCO Anyconnect also has the issue. -
I just downloaded a few ITunes Apps to my PC using windows 8 and they will not work. Suggestions? Thank you.
The apps can only be run on an iOS device. They will not run on your PC.
-
I just upgraded my Mackbook (late 2007) into X Lion , but the Multi Touch gestures is not working. Is this not compatible with my Macbook?
jimmyfromdubai wrote:
... do I need to buy a new MAC office?
A better solution is to try a number of better, free alternatives. Consider
LibreOffice (donation-supported)
NeoOffice (free)
OpenOffice (free)
I use Apple's Pages ($19.99) as well as OpenOffice and have been completely Microsoft - free for over a year now. Life is better without Microsoft. -
Since I installed the new OS X Lion, the iCal syncing through iTunes is not working properly.
Since I installed the new OS X Lion, the iCal syncing through iTunes is not working properly.
When I sync my MacBook Pro with my iPhone and iPad, the events set in both devices (iPhone & iPad) are not transfered to the iCal on my labtop. Events created in both devices are transfered and copied betwen them when I sync them with the iTunes app (through the MacBook Pro) but they are not trasfered/copied into the labtop (iCal). The events created in the iCal (on my MacBook) are tranfered to the devices as two events on same hour. One, with the description created on the iCal, and the other as a New Event (no description). This is happening since I installed the new OS X Lion last week.
I file a report and talked with an Apple Support Representative, but they could not help me. They have not receive any other reports on this matter. Do someone has confronted this issue. I need to find out how to solve this problem.
Regards,
JADHi Sydness,
Thank you very much for your help. It just worked fine. I have 4 macs in my company for 25 years (one is updated each year), and it is the first time I could not solve a problem for weeks. It gave me the opportunity to join this great community.
Charles
Sydness wrote:
I reset my SyncServices and the calendar sync worked perfectly after that.
I followed the instructions found here:
http://support.apple.com/kb/TS1627?viewlocale=en_US
Mac OS 10.7.1 - MacBook -
I installed mountain lion and now my kodak printer is not working. Any sugestion please
i installed mountain lion and now my kodak printer is not working. Any ideas? please help
What errors do you see? The /var/log/cups/error_log file might have some more information.
-
Problems with Mac Pro & ATI Radeon 1900XT
I conect 2 Apple 20"Cinema display to a Mac Pro with ATI Radeon 1900XT, and I only get one of the screens to work. The other indicates with the Led light switching in and out that it won't recognize the video signal. I have restarted the V RAM pressing RP Comand+Option and after the second tone of restart, it continues the same. If I disconect one, then the other switches on. Why does this happens?
Can it be because the CPU and the 2 screens are plugged to the same pluggin base?
Please, help me!!!
and sorry if I have not explain it properly, as I am Spanish, and it is difficult to explain it in English.I have the same problem
Maybe you are looking for
-
Hard drive size for macbook pro
I have filled my hard drive storage and I would like to increase the storage size. What is the maximum size of drive I can go up to? I believe today that I have a 320 GB storage device.
-
How to configure Gennic for router?
I have installed UCCE 9.0. How do I install and configure gennic NIC for the router? The gennic.exe process shows state start pending and waiting. When I go in config manager - > nic explorer and try to add nic I dont see the gennic type there. I onl
-
Removing items in printing queue
How do I delete items to be printed in the queue? The printer is HP 3600 with Windows 7. There is no print icon on the bottom of the desktop anymore.
-
If I hilite a line then scroll down a ways, is there a way to jump back to the hilited text?
If I hilite a line on a web page then scroll down a ways, is there a way to jump back to the hilited text?
-
How do I open and watch videos sent to me from an iphone
I recieve videos from my daughters iphone and cannot open them with windows how do I set my dell computer to open these. Do you have an way to do this