MacPro 2,1 Videocard Upgrade Requirements for Final Cut Pro X ?

I bought Final Cut Pro X in June, had no problem to install it on my MacPro 2,1 with processor
2 x 3 GHz Quad-Core Intel Xeon, RAM 4 GB and Graphic Card and  ATI Radeon X1900 XT 512 MB running under Mac OS Snow Leopard. Recently I upgraded RAM to 8 GB. After switching to Mac OS Lion in july it continued to run in an unchange manner, even if not totally satisfactory due to the known buggy behavior of FCP X reported by many users, but it was anyway as usable as when I installed it.
Yesterday I decided to update FCPX to version 10.0.01, and did so in recommended manner by first deleting version 10.0.0 to the trash and empty the trash can. When I was going to install the new version of FCPX, as recommended, from the "Purchased" department of Appstore, I was denied to do so due to this message: "We could not complete Your purchase - Your computer’s video card does not meet the minimum system requirements".
That´s it, and here I´m stocked in a situation not being able to use FCP X which I have payed 229 $ for, because Apple has taken the right from me to use this application anymore. I can understand that Apple give You good recommendations concerning "the requirements" for running an application, but I doubt it´s acceptable and fair of Apple denying/hindering me to buy the product anyway, or, as in this case of mine, to use a product I´ve already payed for. Fact is, that even if the recommended requirements in respect to my video card not is met for this application (FCPX), so far I´ve still been able to use and benefit from it despite my computers "substandard quality" for running FCP X.
So, now I´m feeling forced to invest in a new videocard as well, if I want to continue to use my bought license of FCP X...What card do I need?
I´m considering to buy the video card ATI Radeon HD 5770 1 GB - do You think this card is compatible with my MacPro 2,1 build, and will meet the requirements of Final Cut Pro X version 10.0.01?

I wonder if there's any reason why OpenCL couldn't be an optional processing preference?
That way folks who had computers which do not have OCL or other cards which don't meet the spec could at least function knowing that the renders would not be optimal - or maybe real time playback of non optimized media might not be possible. But at least they'd be able to function.
I'm sure OCL cant be  necessary for General display purposes in a 2D environment like video editing.
To shut out someones system without warning in a 0.01 update seems a bit radical to me.

Similar Messages

  • What are the system requirements for Final Cut Pro 7?

    I can't find the system requirements for Final Cut Pro 7, I can find the system requirements for X, but like I said not 7.
    I need to know the system requirements for Final Cut Pro 7, so I can buy the correct Macbook.
    Is there anyway I can find out the system requirements.

    Thanks
    I'm somewhat inept about things like this, so I just want to make sure once more: This is in regards to Final Cut Pro 7?

  • Requirements for Final Cut Pro

    Hi,
    I'm looking for the minimum requirements to run Final Cut Pro on a Mac. Do the experts amongst you have any usefull information?
    Thanks
    O.
    Message was edited by: oscario

    There posted on Apple's page for FCS 2: http://store.apple.com/us/product/MA886Z/A?fnode=home/shop_mac/software/apple&mc o=MTYyNjM
    Minimum System Requirements to Install All Applications
    • A Mac computer with a 1.25GHz or faster PowerPC G4 or G5, Intel Core Duo, Intel Core 2 Duo, or Intel Xeon processor
    • 1GB of RAM
    • An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
    • A display with 1024-by-768 resolution or higher
    • Mac OS X v10.4.9 or later
    • QuickTime 7.1.6 or later
    • A DVD drive for installation
    Recommended Configurations
    The following are recommended for all applications:
    • 2GB of RAM when working with compressed HD and uncompressed SD sources
    • 4GB of RAM when working with uncompressed HD sources
    Available Disk Space
    • 4GB of disk space required to install all applications
    • Additional 55GB required to install all optional templates, content, and tutorials (may be installed on separate disks):
    • 9GB for DVD Studio Pro content
    • 8GB for Motion templates and tutorial media
    • 24GB for Soundtrack Pro audio content
    • 12GB for LiveFonts and LiveType animated elements and templates
    • 2GB for Apple Pro Training Final Cut Studio Tutorials media
    also see: http://www.apple.com/finalcutstudio/specs/
    -DH

  • HT4589 What are the computer requirements or specs for Final Cut Pro

    What are the computer specs required for Final Cut Pro?
    Also is anyone operating Avid Media Seven on an OS X Lion 10.

    Lynn Kielley wrote:
    What are the computer specs required for Final Cut Pro?
    http://www.apple.com/finalcutpro/specs/
    Even though it says 4 GB RAM recommended, I think most experience users woild say 8 GB and up is the real minimum.
    Can't answer the Avid question.
    Russ

  • Which firewire interface for Final Cut Pro on MacPro?

    I currently own a Presonus Firepod, and it seems to work pretty well, but may sell this when I upgrade from a MacMini to a MacPro. I use my Mac for Logic Pro currently.
    I anticipate running Final Cut Pro in the near future, so I'm wondering about the ability to read/generate SMPTE time code that the MOTU traveller supplies?
    There will be no external mixer, so this interface will connect directly to speakers & headphones. (would be nice to be able to mute speakers and control headphone mix using just the firewire interface).
    I don't anticipate needing more than 2 Mic inputs - and my current mike is a Rode NT1. (As the NT1 is not a top-of-the-line mic, unsure if I should place a lot of emphasis on worrying about the pre-ams?)
    I would like decent mic preamps, and ability to graphically monitor input and output levels (is this graphic monitoring necessary, or is just the single overload indicator sufficient?).
    Which interfaces in $600-$1500 range would work best with Final Cut Pro - and Logic Pro?

    I saw the Traveller ads in Videography mentioning
    time code, so I presumed it had an advantage over
    other interfaces.
    I found this in some ad copy:
    """The Travler provides on-board SMPTE time code synchronization features that allow you to slave your Traveler system to SMPTE time code without a synchronizer. The Traveler provides a DSP-driven phase-lock engine with sophisticated filtering that provides fast lockup times and sub-frame accuracy. The included MOTU SMPTE Console software provides a complete set of tools to generate SMPTE for striping, regenerating or slaving other devices to the computer."""
    So it likely uses an audio port for timecode I/O. However, unless you have external equipment that you want to slave to Logic Pro, (or have Logic slave to) e.g. a timecode DAT, then this really is not necessary. FCP would not see the Travaller as a "controllable" device.
    For Final Cut Pro use, I'd probably shoot in HDV.
    When shooting a green screen near my computer (or
    maybe even on-site), I wondered if there would be an
    advantage to recording the audio thru an interface
    like the traveller.
    The advantage is that you could capture additional mics and audio tracks with your mac while the cameras shoot. Just slate your takes and sync up later.
    Do I actually need an interface that provides time
    code, or is that only needed for movie work?
    I have SMPTE I/O on my Unitor8, directly accessable in Logic Pro. In 8 years I've probably used it twice to capture audio from some modular digital multitracks. So, unless you have some specific need.....
    Maybe it is simpler just to connect to the mic
    directly to the camera's input?
    Indeed. You should always have camera audio available. Anything else is supplemental. Alternatively, you could use the Travaller or RME, etc. as a "live to camera" mixer in a studio situation. Plug your mics into the interface, create a submix and send it to the camera while simultaneously capturing each mic to an individual track in Logic Pro. There are many possibilities.
    G5 QuadPPC2.5, Ram:12.5g, Magma PCIe-PCI expansion   Mac OS X (10.4.8)   2X Hammerfall DSP Digiface+Multiface, Digi 002r, 4X UAD-1

  • I need to buy a camcorder -- upgrading from a Flip. Which would you recommend as easiest to use with iMovie 11? Which for Final Cut Pro? Thanks!

    I need to buy a camcorder -- upgrading from a Flip. Which would you recommend as easiest to use with iMovie 11? Which for Final Cut Pro? Thanks!

    You can't run iMovie 11 on a PPC G5 running the old OS 10.3 Panther - which is what you say you have.
    iMovie 11 - cameras supported:
    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
    iMovie 9 - cameras supported:
    http://support.apple.com/kb/HT3290?viewlocale=en_US
    iMovie 8 Camcorders supported:
    http://support.apple.com/kb/HT1014
    Digital camera RAW formats supported by OS X Lion:
    http://support.apple.com/kb/HT4757?viewlocale=en_US
    Digital camera RAW formats supported by OS X Snow Leopard:
    http://support.apple.com/kb/HT3825?viewlocale=en_US

  • Code for Final Cut Pro 2 not being accepted by FC Studio 2

    I upgraded to OS X 10.4.11 from 10.4.2. The FC Studio 2 icon would bounce a few times and stop, but nothing else would happen. 10.4.2 was reinstalled, erasing everything. An attempt was made at starting FCP 2, but the OS is not finding the files necessary in OS 9.
    Upgrades Final Cut Pro 4 and FC Studio 2 were made since purchasing FCP 2 as a full package approximately 7 years ago, but FC Studio 2 is not accepting the code for Final Cut Pro 2. How do I correct the problem short of buying the full FC Studio 2 or buying a new hard drive?
    Thank you.

    It doesn't make sense to me either. As Thomas stated, the crossgrade that required you to send in your old FCP install disc was for Final Cut Studio version 1 (which included FCP 5.1) - NOT version 2. And regardless of the fact that you sent in your install disc, you should still have the serial number for FCP 4. It was printed on two stickers that were attached to the "Installing Your Software" booklet that was included when you purchased FCP 4 (upgrade or full retail versions).
    There is NO need to have the old software installed in order to install and upgrade to FCS 1 or 2. All you need is the serial number form the older version; you'll be prompted to enter it during the install process for FCS 1 or 2.
    FCP 2 may install on an OSX version, but will NOT run on ANY OSX version - it only runs on a full installation of OS 9.
    -DH

  • Change for final cut pro HD from Pinnacle Studio 10

    Hello,
    After lots of problems with Pinnacle Studio 10 (windoooooows.....) I finally chose to change for final cut pro HD on Mac OS 10.3.9
    So far so good, I did lots of tutorials to learn but there is one very remarkable thing I really miss. Maybe there is just a thing in my configuration to fix...
    Is it possible to view a part of a movie without randering it after every simple change? It must be technically possible because studio does it for years now, even with overlays.
    Because I just upgraded my ibook with lots of RAM just to try out final cut for the moment, everything runs fine but rendering does take a few minutes/hours.... Well it is ok just to try out maybe I would get a macbook pro if final cut would assure me.
    I feel like cutting blind!
    Studio renders right before exporting, this may take a few hours but I would do this during night...
    As I said, maybe its all my fault and I just have to change some configurations....
    thanks for help
    Fabi

    Make sure your RT settings (upper left menu in the timeline) is set to UNLIMITED RT. This means that the render settings will be adjusted to play back at the best resolution they can without rendering. You might get a green render bar or orange render bar. If you get a red render bar, that means that you have a filter or two that isn't RT and requires a render, or you have too many layers to allow for RT playback.
    If you simply drop a raw clip into the timeline and have to render, that means something is wrong. Your clip settings and sequence settings don't match. You need to choose an Easy Setup that matches your footage, then create a new sequence.
    Shane

  • Student Help advice! what is best iMac model for Final Cut Pro and logic pro

    Hi
    I am currently looking into getting a iMac, but is toggling to device if I need a 27inch or a 21inch(top model),which will be used for Final Cut Pro and logic
    There is a lot of money being invested iMac, and I really not want to be stu k with a computer that not going to keep up with the amount of work load in the future.
    The specs that I have on mine are..
    21inch 
    Upgrades include
    Sdd drive 512gb
    Intel core i7
    16gb of ram
    Or
    27 inch
    Upgrades
    Fusion drive or sdd 250gb
    Intel core i7
    (Possible graphic card) NVIDIA GeForce GTX 680MX 2GB GDDR5 [+ £105.60]
    (Ram is way to expensive so will buy from second party)
    Anyone who has brought a iMac for final cut or logic what would you likely buy?..Am really stuck on the hard drives between the 27inch fusion and 512gb on the 21inch
    My budget is £1900
    My fear is that the 21inch top model's graphic card may not be good enough for advance editing on Final Cut Pro In the future when I start to get more deep into editing..logic really only needs 8gb to run smoothly..buts its the final cut specs that am having problems deciding. I know iMacs are not future proof or technology lasts for that matter, but I do expect to have it run good for a number of years before I upgrade again.
    If anyone can give me some advice, or even tell me about there set up they have for media work please let me know.

    All kinds of things affect system & HD performance, I can't tell you why your 4 year old Mac is slow.  Just because your old Mac is slow doesn't mean that a new iMac will be equally slow.
    You are correct about the issue with the smaller fusion drives.  It's one of the reasons I am not high on recommending them.  Everyone thinks they want power & performance but don't understand the gap between marketing and real life performance.  The 1TB fusion drive however should give you a good combination of rapid access and sizeable storage capacity.
    I have used external FW800 / 7200rpm drives for years and have never had a problem with any of them.  I consider them very reliable but admittedly I DO NOT use consumer drives like the WD MyBook that the big-box stores sell.   For the most part I assemble my own with OWC Mercury Elite enclosures.  In the past few years I have centered on WD Caviar Black and WD Scorpio Black drives.  I also have some Seagate Barracuda 7200.xx drives.  They all perform excellently and reliably.
    Pls. refer to my earlier post for what i recommended to you.

  • New Canon EOS Movie Plug-in-E1 for Final Cut Pro

    Just thought your would like to know. From canonrumors.com
    http://www.canonrumors.com/2011/04/canon-updates-e1-plugin-for-fcp/
    Canon today announces the latest update for EOS Movie Plug-in-E1 for Final Cut Pro – the company’s custom-developed software application that provides quicker and easier editing of EOS Movie footage in Apple’s Final Cut Pro software suite.
    Launching to coincide with the start of the 2011 National Association of Broadcasters (NAB) Show in Las Vegas, EOS Movie Plug-in-E1 for Final Cut Pro version 1.2 will make the importing of EOS Movie files even easier, allowing users to transfer files from any folder, without needing to mirror the folder structure on the camera itself.
    The update also enables smoother importing from Canon’s EOS 7D, EOS 5D Mark II and EOS-1D Mark IV models, allowing users to import footage without requiring the THM file generated by the camera.
    Originally launched in February 2010, EOS Movie Plug-in-E1 for Final Cut Pro is designed to quickly and seamlessly convert EOS Movie footage from Canon’s leading range of EOS DSLR cameras to Apple’s high-quality ProRes 422 codec. The plug-in allows users to convert footage at approximately twice the speed of Apple’s standard conversion, creating a smoother workflow for the rapidly growing number of videographers shooting HD video content on DSLR cameras.
    EOS Movie Plug-in-E1 for Final Cut Pro version 1.2 will be available to download for free from 25th April 2011.

    And I just spent over an hour yesterday explaining to a client how utterly essential it was to maintain the exact folder structure for proper log & transfer:/
    If I say that once a day to students, I say it a thousand times.
    On top of that I just started Carbon Copy Clone today with all my updates in my editing lab. Not the end of the world but it's a little time consuming on 80 stations. Oh well.

  • Where can I find a full manual for final cut pro 6?

    I'm trying to learn final cut because I haver an amature film making contest I'd like to enter and that would give me quite an edge, considering most of the intries will be using movie Could someone help me find a full manual or something that would assist in this indevor? I do only have final cut 6 because I am using my schools imac and that is ther vertion they have. so, can anyone help?

    You should ask your question in the Final Cut Studio forum.
    This forum is for Final Cut Pro X.

  • Can I add a secondary location for Final Cut Pro Documents?

    Hi Guys,
    I'm working on a large project which has taken up most of my 2tb hard drive which I use for my final cut pro documents (capture scratch, render files etc). Is it possible if I plug in another hard drive to use that as a secondary location for final cut pro documents as I have other (smaller) projects which I could be uploading and working on in the mean time? If so, how is this achieved and what are the pros / cons?

    Sure -- go to Final Cut Pro menu on your menu bar and select System Settings.
    The first tab is SCRATCH DISKS -- that's the term too -- not secondary folder for FCP Documents.
    Change it there.
    Drawbacks...
    It has been a while since I've had to deal with this, but FCP used to not remember (feature or bug??) a project's original scratch disk location and if you change it for ONE project it will be changed for ALL future AND past projects... until you change it back.
    Now, that in itself isn't a BAD thing. All that that means is that if you continue to capture material into that old project it will now put it over here instead of over there. Also, other things like render files and such which won't really matter much unless they do... and now you've got stuff spread over a coupla drives.
    FCP's projects don't care. They've already mapped where they need to go to get the video and render files it needs. Move your Scratch Disk 33 times... won't make a difference to the browser and timeline. -- UNTIL you remove one of the important drives. THEN red lines galore! Un renders, missing files... messy messy messy!
    Much better to start and finish a project in scratch disk. Makes for easy cleanup. Kinda like cooking thanksgiving dinner (American??) in 5 houses at once.
    Good luck,
    CaptM

  • Canon EOS MOVIE Plugin-E1 for Final Cut Pro Now Available...

    There's been so much talk about the 5D, 7D, 550D on this board that I'm going to point to the EOS MOVIE Plugin-E1 for Final Cut Pro. This is supposed to speed to transcode of Canon Camera H.264 to FCP-friendly formats and let you add more metadata along the way.
    Enjoy!
    Canon webpage. Under Drivers & Downloads. Once you select your OS, "Mac OS X", the download should appear near the top of the "Software" list.
    Note: (from Quickstart Guide)
    This plug-in software allows you to convert MOV movies shot with an EOS Digital camera into ProRes files at high speed in the (Log & Transfer) window of Apple's Final Cut Pro.
    FWIW: The quick start guide says cameras involved are 7D, 5D, 1D, no mention of 550D. Sort of odd.

    For users in North America to make the Canon EOS REBEL T2i work (550D for Europe):
    1. Install the new Canon EOS MOVIE Plugin-E1 for Final Cut Pro (http://www.usa.canon.com/consumer/co...nloadDetailAct)
    2. Go to Library/Application Support/ProApps/MIO/RAD/Plugins/CanonE1.RADPLug/Contents/Resources/
    2. Open up cameras.plist
    3. After the 7D info add the following lines of code (keeping to the coding structure):
    <key>T2i</key>
    <array>
    <string>Canon EOS REBEL T2i</string>
    </array>
    4. Save the text file. Close it. Everything should work now.
    Cheerz.

  • Following Media Files Are Not Optimized For Final Cut Pro

    I'm sure you've seen this before and I've tried to search for a thread on it here and fell asleep, so sorry if this is a repeat.
    I have edited projects in Premiere Pro (on my PC) and I have tried to transfer them in FCP. It worked with the exception of two things:
    1. the error message, "Following Media Files Are Not Optimized For Final Cut Pro"
    2. the quality *****! watching it on the playback in FCP it looks great, but then when I burn it to Disc it's pixelated in spots and generally has a lower quality picture.
    I know that it's Standard Def. and can't expect the best, but I've done it before (once or twice) and it didn't seem this bad.
    Can someone suggest anything to help the quality? Should I run my AVIs through MPEG Steamclip to make it a QT file and if so what is the best format in that since there are many to choose from and most I'm not familiar with?
    Thank you,
    Crayton

    I did compress them to DV NTSC then burned it to DVD and the result was no bueno.
    I thought what I would do is try compressing them again before I send them on over to DVDSPRO. Here is a simplified break down of the situation:
    - I have edited the raw footage in Premiere Pro on my PC. They were recorded and captured as SD.
    - I rendered them in Premiere, then transfered the rendered AVI file to FCP.
    - When went to place the files in FCP, I received the warning message; "Following Media Files Are Not Optimized For Final Cut Pro" but I went forward anyways and it allowed me to do so.
    - Originally I went ahead and compressed them from FCP to QT Movie as a DV NTSC, which ended up poorly.
    - Therefore my question is, should I compress them using another file type (other then DV NTSC)? Which leads me to another program that I have called MPEG Streamclip, which offers tons of file types of which I am unfamiliar with most. I want the best quality of course but don't know what file type is the highest going from AVI to a format that can be accepted by FCP and ultimately DVDSPRO. Keeping in mind that I only have FCP5 and do not have Prores.
    Did that make sense?
    Thank you again,
    Crayton

  • I can't install trial version for final cut pro x

    I can't install trial version for final cut pro x on my computer..

    What are you trying to achieve?  Are you editing movies as a hobby? Or trying to build a business – and, if so, what kind?
    iMovie is the first thing that comes to mind. Not the depth of FCPX, but it can still do some excellent work.
    Russ

Maybe you are looking for