MacPro+4870+NEC 2690WUXi2=Chaos Any solution yet?

I received yesterday my NEC 2690, and contrary to what I expected (I read somewhere 10.5.7 would have solved the issue) I have the monitor not recognizing the signal at boot.
The last post I see is from late May, anyone (NEC in particular) found a solution, not just workarounds?

HI,
Try repairing disk permissions.
Launch Disk Utility. Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac.
Carolyn

Similar Messages

Google images only showing first page. Any solutions yet?

Hi
I've recently come across this problem of Google images only showing the first page of images with the rest being blank grey boxes.
After trawling the web for days it seems this has been an ongoing problem for many for several months now but I haven't seen any solutions that have worked for me.
I've cleared the cache and temp files, I've un-checked 'disable or replace context menus' on firefox etc.
It seems to run ok on ie8 but I prefer to use Firefox if at all possible.
Is there a solution out there?
I am on XP Pro sp3 using FF 3.6.11

This was happening to me (only getting one page of images after a search.) I disabled the AdBlock Plus ad-on and the problem was solved.

Headless mac mini - no airplay mirroring in ML. Any solutions yet?

Hi to the masses.
I have recently purchased a new (well mid 2011) mac mini. I gave up waiting for the 2012 model!!... anyway. I have it configured as a headless server and as such is working perfectly well, that is with the exception of not being able to Airplay Mirror with Mountain Lion (10.8.2) to either of my 3rd gen ATVs.
After playing around with it for quite a while i managed to work out that if it is connected to a display it will airplay mirror perfectly well, but if it doesn't have a display attached the image that is received by the ATV is garbled with flashing neon colours.
Looking through the web i then discovered it's a commen fault with the mini, a design flaw even, but i can't seem to find any solution for it.
Maybe i should also mention it was purchased configured with Lion, not mountain lion, but i did do a complete reformat and clean install right from the start (and again since to see if it was just a screw up in the system). I have also tried resetting the SMC(?) and PRAM(?) (if those are the terms) but neither had any effect.
So i ask you all, has anyone cracked this nut? Is there a solution out there? Is there one coming (haha i had to ask) or do i return the mini to Apple and wait for the 2012/13 model to be released?
Any help would be appreciated.
(I'm sorry, I forgot to use a smiley in there somewhere... )

Judging from the other posts around the web, there are a few people who want to do this -- some of them have even posted that they are doing exactly what I am doing, with the same frustration. We want to use the Mini as a home media server, so it really doesn't need a display... except for those times when it needs a display. At those times, it would be nice to be able to send the image somewhere. Silly to have a nice display and never use it...
The other application (which, coincidentally, I also want to do) is have my Mini way over there, out of the way, and display it on my TV way over here, without having to actually *look* at the Mini sitting in front of my home theater.
Some folks have reported success in "fooling" the video chip into thinking a monitor is attached by plugging in a dummy plug (using simple resistors) to the video out. I've tried it on my late 2012 model, thus far without success. I'd love to know if anyone knows how to make a dummy plug that acts enough like an actual video load that it does fool the Mini video chip and allows the Airplay function to take place normally!
Thanks all
Chris

Any solutions yet with noise issu

Has anyone found a solution yet with the audigy?2 platinum crackling, static and popping issue? I find this is obviously not a top priority with creative, as they continue to release new products with the same problem. I've been searching everywhere for about a year now and have yet to find a solution. If someone knows something I don't, plese reply?Thanks

gufemur,
A theory and a possible solution to the snp problem is offered in this thread. See especially the posts by Rooster.

Ghosting with External CRT Monitor. Any Solution Yet?

a number of months ago i saw a LONG thread that, as far as i read, never really solved this issue. I was wondering if a solution was ever found.
thanks, seth

more tests reveal a very perplexing conclusion:
my PB works with:
1. NEC (model #: ??? - looks very similar to LaCie electron blue), with built-in vga cable and apple adapter
2. NEC Accusync 120, with removable vga cable (using both this NEC's supplied vga cable AND my LaCie's supplied vga cable) and apple adapter.
LaCie Monitor works with 2 different PC laptops connecting via vga cable. No adapter needed.
I have observed that the problem is
1. not with my computer, since it works with 2 other monitors.
2. not with the LaCie Monitor nor the LaCie-supplied vga cable since it works with 2 different PC laptops
3. not with the vga cable/apple adapter combination because it works with PB attached to NEC Accusync 120
Which leads to the conclusion that this Macintosh PowerBook 15" Aluminum DOES NOT WORK with this LaCie Electron Blue 19
Can someone explain?

Safari Random Quit -- any solutions yet?

Safari 6 on 10.7 Lion has been randomly quitting on me for months now. There is no error report just this message in the Console:
Received an invalid message from the web process with message ID 323002f
I see that others are having the same problem with the exact same Console message. Has anyone figured out how to fix this yet or is it a bug?

Select Safari ▹ Preferences ▹ Extensions from the Safari menu bar. If any extensions are installed, disable them and test.
Select  ▹ System Preferences ▹ Network. If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test.

I upgraded to iOS 5.0.1, and now my battery life has really deteriorated since. I was making it thru the day with about 75% left. Now it's only 3:30 pm, andI'm at 50%. Any solutions, yet!

I upgraded to iOS 5.0.1 yesterday, and now my battery life has really deteriorated since.I was making it thru the day with about 70% battery life left. It is now 3:30 and I'm already down to 50%. The upgrade worsened my situation. Any help out there?

I had the battery problem. I upgraded the to iOS 5.0.1 last night and at least that problem seems to have been fixed. However, the problem with no audio on phone calls remains. Have not tried swapping the SIM card yet. The ATT guy says that they have resolved 90% of the no audio issues with a new SIM card. Not sure athat what has to do with anything but will try that first before requesting a replacement phone.

Compressor-Unable to submit queue-Any solutions yet?

Below is a common problem with compressor I am now experiencing. In the past and on the web there are many many references to this problem with no simple solution. Has any one heard of any new fixes for this problem?, or just anything that works to fix it. I would like to use compressor again,
Compressor-Unable to submit queue
Please restart your computer or verify your Compressor installation is correct.
I did ugrade to dual core intel mac pro recently
mac pro OSX 10.6.8

You tried all of the troubleshooting tips posted by Michael Grenadier?
Russ

Bus noise on X-fi Extreme music for SCSI user....any solutions yet?

Hi there!
Some time ago i bought my X-fi extreme music card...and i have not been
able to use it properly yet !!!
My problem is: - I use a adaptec 2960N scsi controller in my system, wich i have all
my dri'ves and HD connected to. It use one PCI slot (slot ).
When i play any sound/music with the X-fi card and there is
"additional bus activity" (normally from HD) then the sound "scratch".
Done so far: (with no result)
- Change the card's PCI slot
- Update the latest creative driver
- Update the mainboard bios
- Change the ASPI settings
- Increase the X-fi latency for the PCI card
- Made sure the X-fi dont share IRQ with any other card
- Tested the X-fi card in another computer...and there it works BRILLIANTLY
(nforce 3..no scsi just ide)
System info: Epox Ep -9PDA+ Ultra Nforce 4
AMD X2 dual core 4400+ CPU
024 MB A-data DDR 500 RAM
Maxtor Atlas V Ultra60 SCSI HD
Geforce 7800 GTX
I've read that there are other SCSI users who expirence the same problem
as me on several net forums.
I've also asked Adaptec who have made my controller for a "driver" update,
but they say that the problem is the sound card so its therefore up to
creative to solve it.
I talked with a Creative representati've in Denmark who promised to forward
my problem, but nothing has happened yet?
Hope someone can solve this little "bugger",
Best wishes
PeterMessage Edited by PHH on 2-26-2005 03:59 PM

Hello
I have a Adaptec 39320A-R SCSI Controller with some SCSI dri'ves.
I had ZERO problems with my previous AUDIGY 2 ZS. No noises or cracks or popping , at no time.
Now i have the crackles and pops / noises , when i listen to music and there is some harddri've activity.
I just can avoid it, by switching to audio creation mode, and enable "bit matched playback" in the options there, so it seems, it just is a "simple" software issue, that could be solved.
As soon as i switch to game mode or entertainment mode (regardless of all optimizations are turned on or off) , i get the annoying noises.
I hope there will be a good software update soon.

Any solution yet to the C3 display flaws?

From what I understand, there is no way to adjust the brightness of the display, nor change the time that it takes for the device to drop into sleep mode. First of all, I don't understand why Nokia decided that customers shouldn't be able to change these. The display is so awfully bright, it physically hurts my eyes. The sleep mode timer is so horribly short that I have to press random buttons all the time just to keep the light from going out. Now, I heard a rumour that it is actually possible to change these by hacking the device with the help of a PC. Is there any truth to this? How can it be done? Other than that, is there any hope that we will see these options made available to us in some future firmware update, or does Nokia adamantly believe that it is a good idea to deny us the ability to customise our phones? I'm seriously considering returning the C3 to the store, because of that frustrating flaw.

True or false it's against the rules to discuss any form of hacking here as that voids the warranty. Try elsewhere for that.
If you would like a comment from nokia about these "issues" you need to contact them using the "contact us" link near the top or bottom of this page.

Generate Index causes problems - any solution yet?

Hi all,
I searched the forum and knowledgebase, but i'm totally puzzled.
What is the best solution to avoid Indesign CS3 (5.0.3) from crashing when generating an index from a book with multiple documents containing references?
Is it the script from Ole to convert the book to one document?
Is it updating preview on each document (updating preview also crashes)?
Is it something else? Or is there a plug-in i could use?
As I said before, i have Indesign CS3 version 5.0.3.
Many thanks in advance,
Glen Bal

Netflix are dropping Silverlight, they have already done so for Internet Explorer 11, and will do the same for Safari in Yosemite.
They are using the new HTML5 Premium Video feature of Safari in Yosemite which signficantly improves battery life.
See http://techblog.netflix.com/2014/06/html5-video-in-safari-on-os-x-yosemite.html
(Personally I think the reason Netflix are doing this is nothing to do with battery life but down to the fact Premium Video Extensions includes DRM support ugh! for the first time in HTML5 and the fact that Silverlight is gradually being adbandoned by Microsoft. See http://gigaom.com/2010/10/29/microsoft-giving-up-on-silverlight-joining-html5-pa rty/)

My New Apple TV is Slow to load TOO....Any Solution Yet?

Hi Everyone,
I can play every video on you tube wireless on my iMac in a split second. The same movie on Apple TV is SLOW!! Sometimes they don't even load and it goes into the screen saver mode. This has nothing to do with router or speed since I have one of the fastest connections and an airport extreme router. Any help or suggestions would be appreciated. Thanks
GE

It isn't just a case of the interface. As I understand things the you tube videos you watch on the tv are AVC files and those that you watch on the imac are not and whilst I can't be sure this is likely to mean they come from different servers.
As I say others have reported issues with watching you tube on the tv and not on their macs, some have noted that the longer the video the more likely the issue.
I myself have not seen this, but as you can see I am in an entirely different location to you (where the tv may not be quite as popular and the iphone has only just been released). Another consideration is whether you or your ISP are using proxy servers which may well explain such behaviour.

TS3217 This song skipping bug on iPods has been around for years! Is there any solution yet?

I've tried resetting my iPods. (I've got 3 Classics, 2-80gb, 1-160gb) I've tried 256kbps, 190kbps, and 128kbps compression rates. All using AAC, all synced with a Mac Mini with Mountain Lion and the latest software for iTunes and the iPods. It doesn't seem to matter what I try, all three of the iPods have the issue- they'll be playing fine, then they randomly stop prior to the end of a song, and skip to the next one. The original songs are fine on the computer. I've tried syncing with a different computer that has a different backup drive storing the song. It still happens. I've deleted songs, downloaded them from iCloud, and it still happens. Is it just the iPod Classics, or does this happen on solid state iPods as well? Is there any sign of a fix? I've got over 12000 songs, and I'm kind of committed to this format, since Apple has pretty much killed all the portable music player competition.

I've been told by Verizon business team that Sumsung and Verizon are working on a fix. Of course, that could be one month or 12 months.
My wife and I have a Samsung S3 and Note II and both, on Jelly Bean have the same flaw. It's very frustrating. I carry with me an unlocked HTC and also Verizon Incredible 2. Since SIM Data plans are cheap enough in most countries, I just get additional SIM cards with a data plan and turn on the hotspot feature of these devices with I access from the S3 and NOTE II. Not ideal, but close enough for now.
In the UK, I am hoping the LTE capabilities will work (VodaFone UK is imminent).

Error during in place upgrade of IPAM (W2k12 to W2k12 R2) - any solution yet

After an in-place upgrade of an IPAM server from W2k12 to W2k12 R2 and during the IPAM upgrade from ver 6.2.0.1 to ver 6.3.0.1 I receive an error:
Failed to convert Schema
The given key was not present in the dictionary
Please restart the wizard to update the IPAM server
The error.log at %windir%\WID\log has an entry of:
Login failed for user 'NT AUTHORITY\NETWORK SERVICE' Reason: Could not find a login matching the name provided
I've installed sql express mgmt studio on another lab IPAM server and don't see any db server logins for Network Service so it's not a surprise that the login would fail.
I have seen other mentions of others getting this error with the reply that this is a known issue and a hotfix is on the way. Is this a known issue and is there a hotfix - or some other fix - available.
In a related note, is there any official technical documentation re: the IPAM upgrade process such as an Operational Guide or something similar? All I have been able to locate are marketing type of documents that extol the new features in IPAM ver 6.3.0.1
but I haven't located any technical documentation.
Thanks

That's sadly funny. The hotfix leads to a different error. Thankfully I'm not an end user of IPAM - which seems to me not ready for prime time and not worth the trouble. The overlapping scopes was one of the issues for me that was preventing
a successful upgrade in my dev environment, which is nonsensical since an overlapping scope is a failover scope which is one of the selling points of wk212 r2 dhcp which IPAM is supposed to work with. As I recall you can't have reservations either.
My prod environment, I didn't have any overlapping scopes and got rid of all reservations and the upgrade still failed so I ended up removing the IPAM feature and doing a fresh install using the WID db and then migrating to SQL using move-IpamDatabase
(I couldn't get using a remote sql db to be seen during a fresh install thus the WID then migrate).
Hopefully, the end users will tire of the limited functionality of IPAM and it'll fade away here and I won't have to deal with it much longer.

The deep traversal woes - any solutions yet

Maybe I should post this issue in the software forum, indeed I might. I was wondering if anyone has found a fix for the perpetual "preparing backup" issue? Before I return the TC, i want to make sure this can't be fixed by anything i can do.
i have had this issue with both versions of the firmware and erasing my backup every three days isn't a big vote of confidence to this new system.
cheers

Have you, or anybody, learnt anything on the deep traversal yet? TC been working fine for a few days & now were having a fit of the deep transversals!!!

MacPro+4870+NEC 2690WUXi2=Chaos Any solution yet?

Similar Messages

Maybe you are looking for