MacPro (Jan 2008) Leopard 10.5.2 and Tiger/Mbox2

I have ProTools LE 7.1 and an MBox2 which I used to use on a Powermac G5.
I now have a MacPro. I have just bought Logic Studio. But it will not work with the MBox 2. It is widely known that PTLE is not yet compatible with Leopard 10.5.2.
I am therefore thinking of partitioning a harddrive and using Logic Studio with Toger.
But here is my question:
Will a universal version of Tiger work on a MacPro (Harpertown, Jan 2008) that came already pre-installed with Leopard 10.5.2?
maybe there is some weird firmware incompatibility with these recent MacPros and Tiger?

Has digi said when they're going to get LE compatible? It has been half a year since the new OS shipped, what is taking them so long?

Similar Messages

Running Leopard on one partition and Tiger on another partition?

I have recently purchased a family pack of Leopard, and I am reading up on a lot of the posts, here, before I venture the installation on two machines. I intend to install Leopard one machine at a time and give a few weeks between installations.
One machine is a 20" 2.0 Ghz Intel - IMAC Aluminum (August 2007), and the other is a G4 Powerbook 17" 1.67ghz 250GB HD. I will probably install on the IMAC first.
My question concerns the G4 Powerbook 17." I have just purchased a 250gb internal hard drive; however, it has not arrived yet. From time to time, I want to be able to run a few programs in classic....., and to have that available to me in the rare event that I want to look at files formatted for classic programs. Call me old fashion or unable to let go of the past... .in any event, I have some files that may be difficult to convert or some software that I do not want to purchase in OS X because I use those programs so rarely.
Initially, I considered just having an external fire wire drive with Tiger installed on it in which I could boot classic up on the rare occasion.
My new idea has been to partition the internal drive to have 10 gb or so available for Tiger. Has anyone successfully run Leopard on one partition and Tiger on the other partition or do they potentially cause problems for one another? Any suggestions, recommendations or concerns are welcomed.

Works like a champ. I run Panther, Tiger, Leopard, and OS 9 on the G4 w/o problems.
Get a bootable, external HD, partition it into enough volumes to accommodate each machine, and make bootable backups/clones of each machine before upgrading/updating and ensure that each boots that machine and works like the original. That allows you to revert to the previous good state without having to reinstall anything. See these for details:
http://docs.info.apple.com/article.html?artnum=106941
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html
Once that's finished, review these for upgrading options:
http://discussions.apple.com/thread.jspa?messageID=5757385
http://discussions.apple.com/thread.jspa?messageID=5666369
http://discussions.apple.com/thread.jspa?messageID=5646414

Popup TABS in Safari 4.0.1 on Leopard 10.5.7 and Tiger 10.4.11

So these aren't really the standard popup windows that we are used to. There are a couple of sites (kbb.com and yahoo's mail just for examples) that while they are loading I visit other tabs that I have opened and all of a sudden I am returned to the other tab. I have "Block pop-up windows" turned on and I have the other web content under security checked on. Does anyone know how to avoid these annoying interruptions and still be able to visit these sites? This happens to me at work on my G5 PowerMac on OS X 10.5.7 and at home on my MacBookPro on OS X 10.4.11

Similar here, but not quite the same. Mine has issues playing videos from CNet, I click on the page and nothing loads video-wise.
When I use Firefox, they all play just fine. Looks like the CNet pages are using Adobe Flash 10, which may be where problem lies..

Can I have Leopard and Tiger on different drives???

The whole question: Can I have Tiger on one drive, Leopard on the other, and run the same programs from whichever one is the boot drive?
Will having the other OS on a nearby drive get in the way of anything? Both internal drives have Tiger on them, so If one goes nuts, the other might be helpful, but can that second drive become Leopard, so I can boot it and poke about? Will the Leopard drive be able to run the programs that are currently working within Tiger?
Is this asking too much?

I'm not sure I understand you question
Yes you can run Leopard on one drive and TIger on another - I currently have leopard on an external drive and Tiger on my internal drive
At David DeCristof's suggestion I cloned TIger onto the external drive (using Carbon Copy Cloner -- CCC) and upgraded to Leopard there
Since both drives contain all the same data and applications (at least started that way) I can run anything on either -- if I save data from Tiger that I want to keep after I clone Leopard back to my internal drive I will have to be careful to stove it on the external drive
It is, IMHO, a smart way to upgrade
Larry Nebel

JAN 4, 2012 As of the Upgrade to   Lion,. and the Email portion, ..   DOES NOT allow a Video Clip to be sent via the Email as the I-Photo is not supported by Video Clips ( Previous Leopard No problem clip and drag via Quick Time Pro to the email

JAN 4, 2012
As of the Upgrade to   Lion,.   2007 I-Mac -   the Email portion, ..   DOES NOT    allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip ..      Now Lion only Export's   1 size, .   only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail    ???
Between the   Issue of   the   Lion, and Email issues ,   and the   Upgrade of   I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge ..    70,000 + photos in the Computer. .   and was   40,000 in the   I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB   or 32 GB   Unit . .
          No Help . ..   so far, .. as a Apple user   since   1996 ..    I have Never experieanced such frustration    ???
               ( any one have some help if similar experiances    ?     thank you     )

JAN 4, 2012
As of the Upgrade to   Lion,.   2007 I-Mac -   the Email portion, ..   DOES NOT    allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip ..      Now Lion only Export's   1 size, .   only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail    ???
Between the   Issue of   the   Lion, and Email issues ,   and the   Upgrade of   I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge ..    70,000 + photos in the Computer. .   and was   40,000 in the   I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB   or 32 GB   Unit . .
          No Help . ..   so far, .. as a Apple user   since   1996 ..    I have Never experieanced such frustration    ???
               ( any one have some help if similar experiances    ?     thank you     )

I'm on a MacPro, Snow Leopard, 10.6.8 and did software update to safari 5.1.4. Now I can't open Microsoft Word or Skype. I've done repair permissions, restarted. How can I fix ASAP? Wish I could dump this and go back to 5.1.2! Help!

I'm on a MacPro, Snow Leopard, 10.6.8 and did software update to safari 5.1.4. Now I can't open Microsoft Word or Skype. I've done repair permissions, restarted. How can I fix ASAP? Wish I could dump this and go back to 5.1.2! Help!

Try this Safari5.1 from the installer package
http://www.filefactory.com/file/cc9005d/n/Safari.pkg.zip
The download worked better with Firefox not sure why. At the bottom of the page after the captcha>> slow down load is the Free link, it took about 4 minutes to download on my test.

Just bought Snow leopard 10.6.3 and upgraded my 2008 iMAC; now want to use the free upgrade to Maverick... is that possible? I read compatibility requirement of 10.6.8 or later...

Hi! Just bought Snow leopard 10.6.3 and upgraded my 2008 iMAC; now want to use the free upgrade to Mavericks like I was advised in the Apple/Switch store... is that possible? I read compatibility requirement of 10.6.8 or later...???? Thanks for any guidance!

Before installation you should back up all your data.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes (you will need the latest version in order to synch with mobile devices).
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
iCloud system requirements:
http://support.apple.com/kb/ht4759
If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
http://store.apple.com/us/product/D6106Z/A/os-x-lion
or Mountain Lion:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

Offset start and Offset Length for JAN 2008

Dear SDN,
Any one can explain what is Offset start and Offset length in the replacement path of a variable..
For example How to set Offset start and Offset length for JAN 2008..( I want to use 0Fiscal year /Period)
It is very urgent..
Help will be greatly appreciated with Points..
Thanks...

This link will explain you clearly about Offset
http://help.sap.com/saphelp_nw70/helpdata/en/af/809528939d5b4fbff7e16a5bdc0d85/content.htm
alsdo check the offste setting in the following link.
http://help.sap.com/saphelp_nw70/helpdata/en/03/6ba03cc24efd1de10000000a114084/content.htm
regards,
Rakesh

MacPro with both Leopard and Tiger drives. Want to switch iTunes How

I am running a MacPro with both Leopard and Tiger drives. I finally want to switch everything to Leopard and its drive. I have iTunes on the leopard drive but have never used it. How can I transfer my iTunes music, iPhone Apps etc. from the Tiger iTunes to the Leopard with the least amount of fuss?

Hello hassiman,
For additional information regarding moving the entire library from the 10.4 partition to the 10.5 partition, see this article:
http://support.apple.com/kb/HT1449
If your iTunes Library is substantial, you may want to consider backing it up to an external location as well:
http://support.apple.com/kb/HT1751
Hope this helps,
Charles H.

Just bought a second hand MacPro early 2008 running Mavericks. How do I reset it to standard deleting previous owner admin account?

Just bought a second hand MacPro early 2008 running Mavericks. How do I reset it to standard, deleting previous owner admin account?
The previous owner seems to have cleared most of his stuff but I can't make changes as it's asking for the admin password!
Is there a way to reset the MacPro back as if I was logging on for the first time so that I can set it up as my computer?

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number onthis page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from theApple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

MacPro early 2008 kernel panic at startup - need help!

I have a MacPro early 2008 with OS 10.7.5 and I can't get it to restart without getting a kernel panic error. I get it at the grey screen at normal startup, safe mode, and trying to boot from the original install disk. I reset SMC and PRAM and still nothing. Running the extended diagnostics last night turned up no error codes. Any ideas?
Not sure what else to try at this point other than ordering a replacement graphics card which could be a chore to find in itself. Is there anyway to confirm if that is it?
Thanks!

this is the last one I got before everything stopped.
Interval Since Last Panic Report: 20131557 sec
Panics Since Last Report:          2
Anonymous UUID:                    13ED7809-A8F9-422D-9DE3-BDF0CF931EF5
Wed Aug 27 23:12:30 2014
panic(cpu 7 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81b7b024, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x000000011e231000, CR3: 0x0000000020407000, CR4: 0x0000000000000660
RAX: 0xffffff7f81c1c520, RBX: 0xffffff80108c1800, RCX: 0xff8b98a0ff8d97a0, RDX: 0x0000000000000000
RSP: 0xffffff80b815b7e0, RBP: 0xffffff80b815b800, RSI: 0x0000000000000001, RDI: 0x00000000ffffffff
R8: 0xffffff80b815b344, R9: 0xffffff8010db7ed8, R10: 0xffffff80b19ba047, R11: 0x00000000e0000000
R12: 0xffffff809f2c7b80, R13: 0xffffff809f5b5138, R14: 0x0000000000000000, R15: 0xffffff809f2a7000
RFL: 0x0000000000010246, RIP: 0xffffff7f81b7b024, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x000000011e231000, Error code: 0x0000000000000000, Faulting CPU: 0x7
Backtrace (CPU 7), Frame : Return Address
0xffffff80b815b490 : 0xffffff8000220792
0xffffff80b815b510 : 0xffffff80002c4794
0xffffff80b815b6c0 : 0xffffff80002da55d
0xffffff80b815b6e0 : 0xffffff7f81b7b024
0xffffff80b815b800 : 0xffffff7f81b7edda
0xffffff80b815b860 : 0xffffff7f81b94be6
0xffffff80b815b8a0 : 0xffffff7f81bddf40
0xffffff80b815b8f0 : 0xffffff7f81b9233c
0xffffff80b815b930 : 0xffffff7f81b880d7
0xffffff80b815baa0 : 0xffffff7f81bccd6d
0xffffff80b815bb60 : 0xffffff7f81b85346
0xffffff80b815bbc0 : 0xffffff8000655f3e
0xffffff80b815bbe0 : 0xffffff800065681a
0xffffff80b815bc40 : 0xffffff8000656fbb
0xffffff80b815bd80 : 0xffffff80002a3f08
0xffffff80b815be80 : 0xffffff8000223096
0xffffff80b815beb0 : 0xffffff80002148a9
0xffffff80b815bf10 : 0xffffff800021bbd8
0xffffff80b815bf70 : 0xffffff80002aef10
0xffffff80b815bfb0 : 0xffffff80002daec3
      Kernel Extensions in backtrace:
         com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81b7a0 00->0xffffff7f81c3cfff
            dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 a1000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f8088f000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8082b000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80856000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 18295607308262
last loaded kext at 9307645171571: com.apple.filesystems.msdosfs 1.7.1 (addr 0xffffff7f807c1000, size 57344)
last unloaded kext at 10790785543944: com.apple.iokit.IOUSBMassStorageClass 3.0.3 (addr 0xffffff7f80798000, size 69632)
loaded kexts:
com.parallels.kext.prl_vnic 7.0 15094.749908
com.parallels.kext.prl_netbridge 7.0 15094.749908
com.parallels.kext.prl_hid_hook 7.0 15094.749908
com.parallels.kext.prl_hypervisor 7.0 15094.749908
com.parallels.kext.prl_usb_connect 7.0 15094.749908
org.virtualbox.kext.VBoxNetAdp 4.1.6
org.virtualbox.kext.VBoxNetFlt 4.1.6
org.virtualbox.kext.VBoxUSB 4.1.6
org.virtualbox.kext.VBoxDrv 4.1.6
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleHDA 2.2.5a5
com.apple.GeForce 7.3.2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleLPC 1.6.0
com.apple.filesystems.autofs 3.0
com.apple.driver.CSRUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleIntel8254XEthernet 2.1.3b1
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleUSBUHCI 5.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.nvidia.nv50hal 7.3.2
com.apple.NVDAResman 7.3.2
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.kext.triggers 1.0
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBHIDKeyboard 160.7
com.apple.driver.AppleHIDKeyboard 160.7
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 6 GB, SMC 1.25f4
Graphics: NVIDIA GeForce 8800 GT, NVIDIA GeForce 8800 GT, PCIe, 512 MB
Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x802C, 0x3138484631323837324A4438304544364434
Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x802C, 0x3138484631323837324A4438304544364434
Memory Module: DIMM Riser A/DIMM 1, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02BA, 0x202020202020202020202020202020202020
Memory Module: DIMM Riser A/DIMM 2, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02BA, 0x202020202020202020202020202020202020
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce 8800 GT, sppci_displaycontroller, Slot-1
Serial ATA Device: WDC WD3200AAJS-41VWA0, 320.07 GB
Serial ATA Device: ST2000DM001-9YN164, 2 TB
Serial ATA Device: ST31000333AS, 1 TB
Serial ATA Device: ST2000DM001-9YN164, 2 TB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfd400000 / 3
USB Device: hub_device, 0x050d (Belkin Corporation), 0x0237, 0xfd410000 / 4
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd300000 / 2
USB Device: Kensington Expert Mouse, 0x047d (Kensington), 0x1020, 0xfd330000 / 6
USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfd320000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 2
FireWire Device: built-in_hub, 800mbit_speed

Windows 2008 and Tiger SMB Issues

I've been pulling hair out all morning over this one.
We have a new Windows 2008 server for file sharing. We are trying to connect to it via SMB on our network (with AD domain). Works great on PC, works on Leopard, does not work on Tiger.
From connect I type “smb://xxxxxxxx” after a few minutes I get an error: “could not connect to the server because the name or password is not correct” which is odd because I haven’t entered any login credentials to begin with.
I’ve been pouring over Google, Microsoft KB and anything else I can come across with no luck. Things I’ve tried.
-Clearing keychain passwords for the server
-Setting the digital signing on the server to disable (most cited fix, but no go for me)
-Setting Sharing and Security model to “Classic – local users authenticate themselves”
-Setting LAN Manager authentication to “Send LM & NTLM – use NTLMv2 session security if negotiated”
-Editing the smb.conf file on the mac to no security
-Created the nsmb.conf file on the mac with minauth=none.
-Used Directory access on the mac to add the mac and bind it to the domain.
-Many Many restarts of the server and clients (and running gpupdate.exe on the server)
One thing that DOES work is a trial of ADmitmac… but this is not realistic for us if we have guest users needing to access the share.
I’ve been able to use smb before with tiger and windows xp and windows 2003… but the mac is throwing a fit over the new windows 2008. Also, we can’t upgrade all of our machines to Leopard (which does work) because it will break Quark 6.5.

Any relevant looking log messages if you browse in Console?
- cfr

How to get the date in 01-jan-2008 format

hi
how to get the date in 01-jan-2008 format

Check this example of how to get this format..
TABLES: T247.
DATA: V_DATE TYPE SYDATUM.
DATA: V_STRING(20).
V_DATE = SY-DATUM.
SELECT SINGLE * FROM T247
WHERE SPRAS = SY-LANGU
AND MNR = V_DATE+4(2).
IF SY-SUBRC = 0.
CONCATENATE V_DATE+6(2) '-' T247-KTX '-' V_DATE(4)
INTO V_STRING.
WRITE: / V_STRING.
ENDIF.
or
make use of this FM
CONVERSION_EXIT_IDATE_OUTPUT
and see its documentation.
or
/: SET DATE MASK = 'DD-MMM-YYYY'
&DATE&
check with this.
if it is not working try to give space between DD and MMM and YYYY
all of the three work...choose whichever suits u
eg2:
Use FM:CONVERSION_EXIT_IDATE_OUTPUT
Check this Program.....
DATA:DATE TYPE D VALUE '20070912'.
DATA:DATE2(12) TYPE C.
DATA:FINAL_DATE(15) TYPE C.
CALL FUNCTION 'CONVERSION_EXIT_IDATE_OUTPUT'
EXPORTING
INPUT = DATE
IMPORTING
OUTPUT = DATE2.
CONCATENATE DATE20(2) '-' DATE22(3) '-' DATE2+5(4) INTO
FINAL_DATE.
WRITE:FINAL_DATE.
Eg:3
use FM MONTH_NAMES_GET by passing month_names-spras = 'E'
it will return the Mont names in month_names-KTX ( 3 cha short name ) & month_names-LTX ( Long text ). then concatenate 'DD''-' month_names-KTX & 'YY'
reward points if useful

Fan for a macbook 13" (Jan 2008 model)

This is the fan installed in my apple macbook 13inch - Jan 2008 2.3Ghz Core duo. I've now bought three replacement fans supposedly for this model macbook and ALL THREE are smaller than the one illustrated (installed in my macbook) All of the ones that I have purchased (correct part number) are 58mm x 52mm, where as my installed fan is 62mm X 60mm
Can anyone help explain the inconsistence, and better still explain how I can aquire the correct part please?

Hi, Finally got the macbook working again (albeit with a faulty fan). Here's the "about my mac"
and...
Also, here's a picture of the actual Fan, with its number & size.
Thanks

No response from the server after 31st Jan 2008

Hi,
Just now came across a strange problem. I am working on a
flex application which uses Flex 2 SDK and LCDS with Tomcat.
Everything was working fine till yesterday(31st Jan 2008).
But when I run my application today (1st Feb 2008), the
request goes to the server and infact the server processed the
request(seen from log files) but the response is not reaching the
client (either result or fault).
If I change my local system date to yesterday(31st Jan 2008)
or before and run the application, everything works fine.
I assume that this is due to licensing issue with LCDS, but I
m using express version which doesn't have any such restrictions.
I'm looking into the same.
In the mean while I would appreciate, If I could get any
clues or solutions for the above problem.
Thanks,
Chakree.

I figured out the problem.
It has nothing to do with any kind of licensing.
There was a date bug with Hibernate our application was using
and fixing that problem resolved this issue.

MacPro (Jan 2008) Leopard 10.5.2 and Tiger/Mbox2

Similar Messages

Maybe you are looking for